I punched a hole through my 196 taking the govenor out my first time 4 years ago ...then i found mr blakk and know better now ..thanks sir for all you do god bless
I agree 100% , I built a hisun 196cc with all the billet goodies, superman 265 cam, pipe and pwk 24mm carb. Juggernaut driver 9t/60t sprockets doing 60 mph with a Coleman ct200u-ex
Yeah. I like my built 196. It's just as fun and easier to ride than my 224 bike. I don't have to work as hard to keep the front tire down as I do with 224 torque. Once rolling the 196 pulls close to what the 224 does.
@Deucealive75 I'm at 6800 rpm once it hits 60mph this is on a semi downhill but pulls uphill same road about 50 tops at 6200 rpm. The pwk 24mm really wakes it up at 1/2 wide open throttle to full and still pulls wheelies automatic
I do this a lot. I have a legal stock appearing engine and a 236cc billet crank engine that look identical from the outside. That way I can sneak it in a race every once in a while. 😂😊 Other great video thanks for your efforts.
Another awesome video! Do you have vids on adding a 12volt battery? Would like to add LED lights and a Apple Car screen with front and rear view cameras!
I put in a milled ported head. 265 cam. Modified carb. Bored out muffler. I left the governor in but made a removable bypass rod. I have grandchildren who ride them. Also ultra thin foam air filter. 18 pound valve springs. High engagement clutch.
I did the same thing I have a b200r with the Coleman 196 a billet rod 265 banzai cam 26lbs springs exhaust and a cast aluminum flywheel I also got a 40 sprocket with the 10 tooth clutch straight chain and a 24 mm nibbi carb with a 120 jet but it’s only getting to 44 mph and I weight 190 idk why and no govornor
I'm wondering I purchased a new b200r today said it came with upgraded transmission 34mph speed rating.. losend throttle stop screw and pulled 41mph. Thinking on what to start with. 10000watt middrive electric or upgrade the engine.... thanks for the videos 👍
Hay man I have a doodlebug db30 with a 212 hemi what is the best clutch tooth pattern for a 70 t on the rear. Will a it has a 15t on it now so what do you think?
I picked up a returned rsv and the 196 was bad. Got it running and the bike was smooth but smoked terrible. Got a new 212 and wanted to build it some. Stock it vibrates so bad you can't see at points. If I'm going to replace rod and piston anyway should I just go with it or exchange it?
Instead of those Chinese made have a video of a vintage 70s minibikes theremade much netter i know I took mine through the worst terrain up north in the thumb area of Michigan road them all day and night to had headlights 😅had a cat minibike- and mtd Trailflight it was Indestructible 😮in 59yrs old ihave a collection also had a3 wheel tri sport with a rockwell twin340cc 2stroke it went 65mph +leading link suspension also like my mtd minibike
That 196 aint No pushover 💪🏼💯💨💨💨💨 all u need is a speed adder sticker neow mabey a black66 one 🤔
I punched a hole through my 196 taking the govenor out my first time 4 years ago ...then i found mr blakk and know better now ..thanks sir for all you do god bless
I'm actually impressed with the little 196.
I agree 100% , I built a hisun 196cc with all the billet goodies, superman 265 cam, pipe and pwk 24mm carb. Juggernaut driver 9t/60t sprockets doing 60 mph with a Coleman ct200u-ex
Yes I love the 196. It moves out !
Yeah. I like my built 196. It's just as fun and easier to ride than my 224 bike. I don't have to work as hard to keep the front tire down as I do with 224 torque. Once rolling the 196 pulls close to what the 224 does.
@@jakedameron4867 So, Juggernaut driver 9t/60t sprockets doing 60? Sounds like an 8500 plus RPM 196. Nice!
@Deucealive75 I'm at 6800 rpm once it hits 60mph this is on a semi downhill but pulls uphill same road about 50 tops at 6200 rpm. The pwk 24mm really wakes it up at 1/2 wide open throttle to full and still pulls wheelies automatic
Great video! That 196 on that big bike is pretty impressive for what it is!
Yes it is ! I like the 196
I do this a lot. I have a legal stock appearing engine and a 236cc billet crank engine that look identical from the outside. That way I can sneak it in a race every once in a while. 😂😊 Other great video thanks for your efforts.
Thanks for watching!
Great video, its good to know just what kind of gains you can get from increased displacement. What kind of .275 cam if you don't mind me asking?
Thanks, the engine in this one had a Dyno 275
Crazy 66 😂
Awesome!!😎👍
Mr. Black could you please try SUPERCHARGING AMR300 OR 500
Another awesome video! Do you have vids on adding a 12volt battery? Would like to add LED lights and a Apple Car screen with front and rear view cameras!
Check out the B200 playlist ua-cam.com/video/M3llVJ2zPvs/v-deo.html
Love your videos and especially sleepers. Working a 224 sleeper. What app do you use to test you bikes? Thanks.
Thanks! I use digiHUD on the phone for top speed and a Dragy performance meter for 0 to 30 along with the camera GPS
@@Black66 Cool, I need to try it out after the break in period to test my new 224. It has amazing torque. Thanks.
I love a good sleeper. I have 2 98cc s that look stock but are anything but.
Please let me know what you've done to them
I put in a milled ported head. 265 cam. Modified carb. Bored out muffler. I left the governor in but made a removable bypass rod. I have grandchildren who ride them. Also ultra thin foam air filter. 18 pound valve springs. High engagement clutch.
@@Expert51279 a predator 212 265 can fits for it?
I never tried it. I kept it low for my grandchildren.
@@Expert51279 I see I need somebody who can port and mill my head
You should get a frp and do a 99cc build
Here is a 98cc build ua-cam.com/video/TASIlWl5K8k/v-deo.html
I just bought the 200R and breaking it in. I plan to do the zip tie trick, what else can i do to get maybe 35 mph out of it?
Thanks
Anthony
Check out B200 playlist . I go step by step on modifying the 196 ua-cam.com/video/M3llVJ2zPvs/v-deo.html
@@Black66 Excellent, thank you!
Build a vintage mini with a flathead already .Your the OHV master already.
I have one sitting on the table . Its been waiting and waiting lol
What app do you use for 0-30 times
I use a Dragy performance meter for 0 to 30 times
I did the same thing I have a b200r with the Coleman 196 a billet rod 265 banzai cam 26lbs springs exhaust and a cast aluminum flywheel I also got a 40 sprocket with the 10 tooth clutch straight chain and a 24 mm nibbi carb with a 120 jet but it’s only getting to 44 mph and I weight 190 idk why and no govornor
AS long as its fun its all good!
I'm wondering I purchased a new b200r today said it came with upgraded transmission 34mph speed rating.. losend throttle stop screw and pulled 41mph. Thinking on what to start with. 10000watt middrive electric or upgrade the engine.... thanks for the videos 👍
@thomastipton7264 Check out the e- bike playlist and the B200 playlist . They both are fun in their own way
Dang you figure that 223 would do atleast 58mph. Even with that torque converter
Yes you are right, it has done 65MPH in other videos. Check out the playlist on the channel. Thanks for watching!
Hay man I have a doodlebug db30 with a 212 hemi what is the best clutch tooth pattern for a 70 t on the rear. Will a it has a 15t on it now so what do you think?
I have a mud star 196 cc stock internals with a simple straight pipe exhaust and I'm wondering if I need to re jet my carburetor
I have the stock aircleaner on it also
if you still have the stock air box no but if you have performance filter or anything like that u would need to jet up
I picked up a returned rsv and the 196 was bad. Got it running and the bike was smooth but smoked terrible. Got a new 212 and wanted to build it some. Stock it vibrates so bad you can't see at points. If I'm going to replace rod and piston anyway should I just go with it or exchange it?
I'd js exchange it ,you can get a new engine for the same price
212 is a better built engine. Plus full exchange within 30 days.
Instead of those Chinese made have a video of a vintage 70s minibikes theremade much netter i know I took mine through the worst terrain up north in the thumb area of Michigan road them all day and night to had headlights 😅had a cat minibike- and mtd Trailflight it was Indestructible 😮in 59yrs old ihave a collection also had a3 wheel tri sport with a rockwell twin340cc 2stroke it went 65mph +leading link suspension also like my mtd minibike
Idk why but they ain’t recommending your channel to me no more smh. 🤦♂️ now I gotta search your channel to find out if u dropped.
Maybe you can hit the bell notification
Anyone else' that own a coleman ct200u frame broke by the forks ?
Where’s the best place for good but not gonna break the bank mini bike breaks on a RT200 frame