Це відео не доступне.
Перепрошуємо.

Chevy Traverse 2018 - Up Amplifier Install ANC

Поділитися
Вставка
  • Опубліковано 23 вер 2023
  • Visit our Facebook page :
    www.facebook.c...
    DISCLAIMER: This video is for entertainment purposes only: I am not an electrician, plumber, or professional to give you advice. I'm just sharing my experiences and research.

КОМЕНТАРІ • 19

  • @leehughes7265
    @leehughes7265 20 днів тому

    By the way, if you come across another one of these, that fuse box in the way. There are two tabs at the top, pull them down and you can pull the stab tabs up from the bottom to move the fuse box freely out of the way, currently i believe the ANC is causing a pulsing signal when the doors are closed

  • @relaxationnatureissamay9520
    @relaxationnatureissamay9520 10 місяців тому +1

    Nice sharing 💚🍀📷have a Nice day 👍

  • @socheatfishing2502
    @socheatfishing2502 10 місяців тому +1

    Great, Thank you very much for sharing ❤

  • @leehughes7265
    @leehughes7265 20 днів тому

    Is the ANC wiring the same on the premium bose system? On the brown connector correct?

  • @nearons2278
    @nearons2278 5 місяців тому

    I have the 2018 chevy traverse high country. Are the wires the same from the stock amp?

  • @alexpruneda2664
    @alexpruneda2664 Місяць тому

    Do you have to bypass a and c

  • @iricardopugah185
    @iricardopugah185 4 місяці тому

    Do you leave the harness unplugged on the factory amp or it has to be plugged back in ??

  • @lrmxc927
    @lrmxc927 4 місяці тому

    How could you install a better amp for the speakers or for aftermarket speakers

    • @khmerohio
      @khmerohio  4 місяці тому

      You are going to need a 4 channels amplifier

    • @lrmxc927
      @lrmxc927 4 місяці тому

      @@khmerohiowhere would i get the signial for the amp from

  • @andreasgiesbrecht2544
    @andreasgiesbrecht2544 7 місяців тому

    Hi I have a 2019 traverse premier and the plug where you connected the line output converter to has different color wires than mine ..do you know what color wires I need to connect my output converter to?

    • @khmerohio
      @khmerohio  7 місяців тому

      Just tap each one to the wire. If the sub doesn't sound right, switch it around

    • @andreasgiesbrecht2544
      @andreasgiesbrecht2544 7 місяців тому

      ​@khmerohio ok I got them hooked up now but I cut the purple/blue wire but I'm still getting noises through the subs from the anc ..is it a different wire on the premier version?

    • @khmerohio
      @khmerohio  7 місяців тому

      IT IS MOUNTED ON THE FLOOR (CENTER OF VEHICLE) TAKE OFF LF SIDE COVER & RT SIDE FUSE COVER AND U CAN REMOVE 3 10MM BOLTS (CLIP THE PURPLE/BLUE WIRE IN THE BLK PLUG)

    • @andreasgiesbrecht2544
      @andreasgiesbrecht2544 7 місяців тому

      @@khmerohio ok thanks