How to install an subwoofer amplifier chevy Tahoe 2015 and up
Вставка
- Опубліковано 24 лип 2024
- Line output converter amazon affiliate link amzn.to/2G5DOTI
Posi-tap line out converter taps amzn.to/3j9fQpu
Recommended 4 Gauge Amp Kit amzn.to/2R0BUpI
Recommended 8 Gauge Amp Kit amzn.to/3jMmrpN
BUDGET 4 gauge amp kit amzn.to/32ZHiPD
BUDGET 8 Gauge amp kit amzn.to/3lNGYMm
most notable difference is that the PREMIUM kits use OFC (oxygen free copper ) which conducts electricity much better and the budget kits usually are not true 4 Gauge resulting in less wire strands
Budget will be alright for most amps but if your running more than 400 watts rms power I recommend the premium amp kits
Learn how to install a amplifier to your factory stereo on your 2015 and up chevy Tahoe with this video - Авто та транспорт
I do custom car installation this is a great starter video for someone looking to get started. Thank you for sharing
Have not installed in about 8 years - great refresher!
Hey Bro your video is one of the best i saw on you tube. thanks for sharing.
Thank you man worked hard on it
What size ring terminal did you need for the seatbelt bolt for your ground ?
I have a 2008 Chevy Suburban LTZ and I can't seem to find where the white wire and the black/blue to hook up the RCA would it be a different color on my year
Thanks for the video.
Thank you for this video, I've been poking around the fire wall for an hour.lol
I prolly would look at the video llj audio did one a Sierra 2500 had. They make a great harness and products. Wish I would have know about them sooner
would it be the same wires color for a 2017 silverado??
If I wanna get a Limitless Lithuim battery, I no longer need a battery up under hood?
Do you know the number or name of the fuse slot that you used the add-a-circuit to?
Am trying to find a place to put the amp I don't think my amp will fit under that seat Orion HCCA 3000.1
I have a 2013 Tahoe is the wiring the same?
GREAT VIDEO
What are the color codes for the radio if I want to run wire my speaker wire to the radio?
Will this be the same when installing on a 2015-2020 Escalade?
2019 Tahoe Connection. Where to connect this Unit? To add an amp for Existing Speakers no Subs! Advise Thanks
Where do you hook up your ground?
If I want to run 2500 rms ? I follow the same process?
What fuse did you tap the remote to? 10 amp does the amp turn off when truck is off?
Fuse 8 SEO RAP
4:53 It's a what wire? What you say foo
I heard that!
On 2013 my amp stays on when it put it in that fuse box. Why is that and is there any fix for it?
Try a different fuse that reads 0 when the car key is in the off Position and 12 volts when you turn the key to the acc position.
I connected a line output converter to the wires that you showed and they sun would play very lil I connected a 6x9 to the white and blue/black wires and it played good so what could be the problem?
Because he didn't get the right signal he got voice signal for some reason
@@theonlysheepkoophere8492 what's the right one
@@austinthomas8875 I will let u know in a min
My subs are connected to the amp and when I press the gas the subs make a loud noise but if my door or windows are open then the noise goes away on a 2016 esv Escalade
sounds like you need to change the ground point of your amp also DON'T run your main power wire for the amp on the same side of the rca plugs.
Juan Cruz. Sounds like it is due to the Active Noice Cancelling. You need to either cut the mics (not recommended) or purchase an ANC bypass harness. I also have a 2016 ESV and had to do this.
great video, if you have a 17 you need to tap the bose amp, drivers rear quarter. if you tap into a rear mid range speaker you will send a mid/high frequency to the sub which won’t sound right. I have a question for you, how many feet of power cable did you use. i have about 15’ and i’m afraid it’s not enough. lol
Thanks for the extra info I’m sure someone here will find it very useful
And I’m sorry I don’t remember how many feet I used but try to put the amp on the same side as the battery that way your not having to cross the power wire in in the engine bay to reach the battery
What if your tahoe is a 2018 and has bose, but doesn't have the subwoofer?
So where do I tap into the low range speakers at in the 17 Tahoe with Bose
Do yourself a favor and buy the pac audio amp pro. Using a line output converter or audiocontrol LC creates more headaches. I used a harness that plugs into the clip that plugs into the amp that is located rear driver quarter.
@@daevpizarro Do you happen to know the wire colors to tap into at Bose amp? Thanks
Where are you located ?
Does this video take into consideration the Bose system and making the connections in the correct area?
I tried through the door speakers and got to low of out put. I'm going to try near the stock amp. See what happens
@@z.stammer3396 did you ever figure if out
Did you ever figure it out I'm trying to do my 2016 with boss system
Can you tell me where is the factory amp location
Can you do this with a factory radio and not a aftermarket radio? If so what’s needed?
This video is for a factory head unit. An after-market radio you wouldn't have to tap the speaker wires you would just run rca to the input in the back of the radio.
@@lestdatexan thank you for the reply. It will help me for my self install.
I tapped into the left rear speaker signal wires(2017 tahoe LT with factory sub) and noticed the signal was pre processed (low frequency absent) making my bass sound like crap. So i dont recommend this for bass on this suv.
420sycoholic you have to go into the Bose amp 4 wires... in the center console
@@meathead1011980 ok which wire pair color signal will work for my 1 channel amp. And any vids on how to reach amp? Thanks man.
@@420sycoholic hey bro I know it’s been 2 years but I’m trying to hook up the loc and there still isn’t any information on the internet on wire diagrams for these SUVs. Did you have any luck in the center console and what wires if you did.
Do you have the take the seat out
Do u know the peaker cable color for the driver side rear door
Green and green with blk stripe on my 17 tahoe
Great video! But I got a question, you had rca cables from the head unit and from the inverter, so which ones went to the amp??
I wa showing 2 different methods to run rca
You have to do one or the other
Hope all is well
Hey my words are coming thru my subs what can I do to change that
Activate your low pass filter it might say lpf on amp turn it to 80 hrtz
Bro awesome video. But I’m still nervous of doing it myself. I don’t want to fuck shit up. You have a shop if you do where? 👍🏽
I just don’t know y you didn’t installed the amp on top of board ? You don’t want the heat of the carpet on the amp!!?
Putting the board under the carpet helps keep the board in place. I feel that it’s better then having to drill the board into the metal of the vehicle. Better for leased vehicles and rust prevention
The way he did it keeps the board in place without the need to drill into the body. What you could do is add spacers between the amp and board to lift it up off the carpet a bit.
I tried all of this and my output didn't push my subs. Great video though.
Did you have the Bose system
If there is a factory sub try tapping into that instead
I have bosses them on my tablet 2016 how can I hook up my amplifier to push two 12in speakers
I do not like what I just watched. These fuse taps and wire taps and last but not least never run your power wire under your car.
why not, many wires run under the car
@@DirellAlexander including fuel lines and transmission fluid lines which are explosive and flammable
CRIMP ONS? This is NOT the way to do things. You should SOLDER all those connections with heat shrink.
Five hundred 20s he’s right tho
No,no,no. Power wire under the truck!? Fuse tap!? WTF!? Lmao!!! There's a boot under the dash and there is switched power in the box under driver's dash.
Cutting an extra hole in that boot = Leakage ; Power wire under vehicle = Possible fire or fried electronics (if your lucky)
You video shots are too close. You cant really see where you are at. Move back away to give perspective.
Car Installation 101: running the power wire under the vehicle is a NO NO. Ask any pro installer
Yep, your asking for a fire!!
actually no it's not. It's perfectly fine to do so.
It's electrical wires running all under your car. starter, transmission, abs sensors, ride leveler etc..This is no different then putting LED glow lights under your car. Hot wires are connected to those also. This will be ok
You can as long it’s safe like how how he did it. A lot of power wire running underneath the car or truck