I was also bothered by this silly mistake, however I agree that (since the host appears to enjoy being controversial) it might be intention to “trigger” (or whatever some people like to call it) people. Overall the video was informative and useful IMO.
Love your content Jufes, always learning through you. The best part is always the end, far from a monitor, where fps aren't relevant any more. Long live your spirit and keep educating us
sweet! was trying to do something like this because i noticed faster ram seemed to improve my fps alot when playing a low graphics settings which is something i like to do.
That’s because at that point your cpu is the limiting factor usually at lower resolutions/settings where you’re pushing the CPU to generate lots of frames, and obviously the CPU can’t do much without RAM throughput
This video made my day, I’ve done my own AIO Frankenstein stuff in the past. I still have a enermax rad with an evga pump/block well beyond its reasonable life expectancy running a 5960X for a home plex and storage server. Literally been running for the last 6+ years this way.
Very unnecessary as your liquid temperature shouldn't be higher than around +10°C over ambient at load anyways with proper radiator space and flow. Lands you at around the 40°C on the RAM as well. If you really want cold mem, put a peltier in between. Yeah the additional power draw isn't that great (around 50-70W) but you can get consistent sub-ambient temps under load.
i might have missed where the pump is located but it looks like the modded cooler is using the energy transfer to move the water . What deciding factor made you go without a pump?
Converting AIOs to cool random other things is one of my favorites. Edit: hmm, just realized that because RAM uses so little power, you could easily keep them deeply subambient with a TEC and maybe only pull like 40W doing it. Edit2: Thermaltake has a 240 AIO CPU+RAM, maybe mount the CPU block(+pump) on the chipset instead.
I wish someone just sold mods like these, I would 100% purchase if everything came in one package. The modded rad the tubes liquid + ram block. It could be a nice little side hustle and net more than a few bucks.
but the real question is how much voltage can it handle? i heard some people say that some specific ram part can't really handle much more voltage than the stock voltage even with a good cooler.
awe you took my idea... i ended up just adding to my existing loop... ill donate some money so you can buy yourself a $40 dremel...watching you use a hacksaw was painful lol...great video, i miss modding stuff
Hey frame chasers I have a question if you can answer it do you think the new 5090 gpus will be compatible with the 14 GEN Intel CPU I hope you can reach out to me soon thanks bro.
@@J.king87 I’m just asking because I just built my first PC and I just want to know if the 5090s will be compatible with the 14 cpu When they’re ready to come out
Please, anyone who thinks about realizing this stupid project - just don't. If you, for whatever reason, need to only water cool your RAM, don't butcher your AIO, it useful where it is supposed to be - on your CPU. Buy cheap rad, buy cheap maybe Alphacool CPU block+pum combo and hook it up to your RAM block or better - sell your AIO and make custom loop. This may work, but it's just gimmick and in a few days, when you'll done testing this stupid shit, you'll regret destroying your functional Kraken, cause as long as the pump works, it's just alright.
intel's uarch is too fast for OOB memory settings and it gets underutilized because of slow memory. AMD on the hand have got snail cores with inflated cache to inflate avg and high fps.
cuz it gives a huge boost to 0.1% lows... check bang4buck ddr 6000 vs ddr 8600 , he also has watercooled ram now. All the same settings but different ram speeds and timings... INSANE gains.
Not sure if the "youre" in the title is a typo or intentional, as some sort of inside joke, but many people will think this is how it's written. Maybe it's a typo but then quality control is pretty bad. I have decided to unsub from all UA-camrs that seem to be illiterate or "cool" and say things like eggspecially or "you're ram". My IQ has dropped too much from UA-camr dumbness already so now i will just go away. Goodbye!
Yes, I am RAM with this.
I was also bothered by this silly mistake, however I agree that (since the host appears to enjoy being controversial) it might be intention to “trigger” (or whatever some people like to call it) people. Overall the video was informative and useful IMO.
This is legendary, you should do more of these vids. it would be interesting to see if you can control the pump using cam or bios
These videos don’t actually do well, most viewers want drama or leaks, So I only provide actual value once in a while
I think this one is doing better than thought expected? I hope cus this is the content I can’t find anywhere else … much love form Detroit dude
@@FrameChasers very depressing, loved this one a lot
I like diy’s like this. It’s what makes pc building fun!
Love your content Jufes, always learning through you. The best part is always the end, far from a monitor, where fps aren't relevant any more. Long live your spirit and keep educating us
I love this kind of "Junkyard Wars" kind of ingenuity build videos! I can't wait to see the benchmark's
I am thrilled for the comparison video !
Algorithm fuel for techtubers who play games
sweet! was trying to do something like this because i noticed faster ram seemed to improve my fps alot when playing a low graphics settings which is something i like to do.
That’s because at that point your cpu is the limiting factor usually at lower resolutions/settings where you’re pushing the CPU to generate lots of frames, and obviously the CPU can’t do much without RAM throughput
Make sure to test your faster speed for stability so your OS is ok
@@liamm8518 good info. i usually use memtest for like 12hours after overclocking ram.
This video made my day, I’ve done my own AIO Frankenstein stuff in the past. I still have a enermax rad with an evga pump/block well beyond its reasonable life expectancy running a 5960X for a home plex and storage server. Literally been running for the last 6+ years this way.
This is prime Jufes content right here
this was a really cool video; would you recommend a custom loop with more than 1 pump to be continues or like your setup (closed to each component?)
I did the same exact project for 130 bucks Jufes.. thanks for everything bro
Can't wait to see the benchmarks video. Class video as always mate.
as far, as I understand, as long, as there is not graphite tips, the cooling loop should be fine and it should be below 3.6 roentgens
jufes is becoming an engineer i love it
40c is hot even at 1.6v i just pointed a fan at memory with heatsinks removed and it doesn’t go higher than 35c for just the price of a fan
I've had excellent corrosion resistance in mixed metal loops with water plus Water Wetter from the auto parts store.
This is sick, I like it!
dah na nah na nah na nah dah nah na nah nah, BATMAN!! BATMAN!! BATMAAAAAN!! love that oldie lol
Very unnecessary as your liquid temperature shouldn't be higher than around +10°C over ambient at load anyways with proper radiator space and flow. Lands you at around the 40°C on the RAM as well. If you really want cold mem, put a peltier in between. Yeah the additional power draw isn't that great (around 50-70W) but you can get consistent sub-ambient temps under load.
I'd assume that ram waterblocks could be restrictive ? So to avoid that it's easier to separate it?
@@SinonStrike
They're the opposite of restrictive. No flow distributor or jet plane. Most don't even have a finned coldplate, just some channeling.
thank you supporters!!
No teflon tape for the new fittings?
Teflon tape is for tapered threads not straight threads with a face seal.
Teflon tape is a thread lubricant not a sealant so it would be useless for straight bsp threads
i might have missed where the pump is located but it looks like the modded cooler is using the energy transfer to move the water . What deciding factor made you go without a pump?
I completely missed the pump being imbedded in the radiator.
Leaving my original comment up for posterity.
Damn, informative as hell. Wonder if the other tubers will copy this idea for “summer heat” tips lol
too much work for most of them. rather, press run on a benchmark at stock settings 🧂
I hope to see you do a 14900KS DD (Supercool or Iceman) max overclock (e-cores disabled) video.
Such a crazy project! Congratulations sir!
What RAM block is that?
The best kind of overclocking
I see a possibility of making a lot of money with this video.... I'm going to be rich thanks to Frame Chasers 😇😇😇😇
Converting AIOs to cool random other things is one of my favorites.
Edit: hmm, just realized that because RAM uses so little power, you could easily keep them deeply subambient with a TEC and maybe only pull like 40W doing it.
Edit2: Thermaltake has a 240 AIO CPU+RAM, maybe mount the CPU block(+pump) on the chipset instead.
Next video overclock the ram i want to see what that beast can do with the third loop!❤
Fk yeah bro this is why I subbed!!
Squirrels: ~10Ghz cycle
I wish someone just sold mods like these, I would 100% purchase if everything came in one package. The modded rad the tubes liquid + ram block. It could be a nice little side hustle and net more than a few bucks.
I like the idea but would of appreciated air vs h20 cooled ram temp comparison
but the real question is how much voltage can it handle? i heard some people say that some specific ram part can't really handle much more voltage than the stock voltage even with a good cooler.
A 3rd loop for dissipating 7w is wild lol
I love this kind of contents
Awesome, great mod
Now I can compete.
Nice diy mod. But what about before temps?
Can I get some good website suggestions for first time water cooling guides?
awe you took my idea... i ended up just adding to my existing loop... ill donate some money so you can buy yourself a $40 dremel...watching you use a hacksaw was painful lol...great video, i miss modding stuff
do all squirrels look that derpy?
Fuck yeah I love Tweaker ingenuity
“Arise” 😎 if u know u know
Jufes solo leveled so hard with this one
love the video and the idea, but please do not trust the threads on that thin of aluminum. maybe lock in the fittings with some epoxy.
why not just heat up the solder then solder the new on?
Do such videos when it's convenient for the channel. Anyway, golden content!
I love the fact that your using some old rusty hack saw and no protective eye ware what so ever.
A hack saw isn’t throwing sparks or chips lol.
Love your content
That was cool. Fun video.
Make more videos like this please!
Most importantly, download more RAM.
Hey frame chasers I have a question if you can answer it do you think the new 5090 gpus will be compatible with the 14 GEN Intel CPU I hope you can reach out to me soon thanks bro.
@@J.king87 I’m just asking because I just built my first PC and I just want to know if the 5090s will be compatible with the 14 cpu When they’re ready to come out
@@J.king87 all right thank you for the help man. Now I know that the 90s should be compatible with 14 gen
@@J.king87 I’m looking forward to upgrading when they come out
@@J.king87 yeah I have 128 GB of ram DDR five
@@J.king87 this summer I have a project that I will solder 8gb vram and try to solder 16 GB of the ram to get life out of my 3070 gpu
Good stuff!!!
11:36 lmao
What cha using for water block
Cool idea
That hacksaw lol.
Thats a great idea.
lmaoooo that title though 😂
Hpw do either of those ports connect to the pump?
It cost 120 because there isn’t a big market for the product. No competition no competitive pricing
You're a genius ! 🤣
1.6 v for ddr5? dont know man you dont need that much voltages, 1.45v with mines at 7800/8000 no issue dont understand why you need it so high
Probably to produce more heat to show how good it cools the higher the voltage the more heat
More videos like this 😘
SUBBED
Awesome.
LOL. Good luck!
What is going on with the title?
Linus always did stupid unnecessary shit on his channel. At least this actually has merit for your build. Never stop FOFO Jufes
7:27 😂😂
Please, anyone who thinks about realizing this stupid project - just don't. If you, for whatever reason, need to only water cool your RAM, don't butcher your AIO, it useful where it is supposed to be - on your CPU. Buy cheap rad, buy cheap maybe Alphacool CPU block+pum combo and hook it up to your RAM block or better - sell your AIO and make custom loop. This may work, but it's just gimmick and in a few days, when you'll done testing this stupid shit, you'll regret destroying your functional Kraken, cause as long as the pump works, it's just alright.
Amazing
Fire
good video
Cool!
The 🐐
Why doesn’t anyone make these?
because it's completely pointless lmao
@@morgan3625 maybe. I have a 120cm fan sitting on my graphics card cooling my RAM! LOL
Cool
why inteldolts obsessed with Ram OC ?
intel's uarch is too fast for OOB memory settings and it gets underutilized because of slow memory. AMD on the hand have got snail cores with inflated cache to inflate avg and high fps.
cuz it gives a huge boost to 0.1% lows... check bang4buck ddr 6000 vs ddr 8600 , he also has watercooled ram now. All the same settings but different ram speeds and timings... INSANE gains.
Who taught you youtubers grammar
Waaaaay too much work for me
I am RAM
pretty cools mods esp even The three sep loops things im thinking of doing This the granzon link seems fire
6 commercials 11 minutes in. last time I'm watching one of your vids.
I haven't seen a single commercial. Maybe you should pay for UA-cam Premium?
👍
Your*
😀❤️👍
*your
good i,m iran
Meme or ry?
Not sure if the "youre" in the title is a typo or intentional, as some sort of inside joke, but many people will think this is how it's written.
Maybe it's a typo but then quality control is pretty bad.
I have decided to unsub from all UA-camrs that seem to be illiterate or "cool" and say things like eggspecially or "you're ram".
My IQ has dropped too much from UA-camr dumbness already so now i will just go away.
Goodbye!
what unnecessary crap
was just fun 😙
ddr5 is more temperature sensitive than ddr4. BY A LOT. i9 13900/14900 scales a lot with ram speeds in terms of 0.1% lows etc. Not a crap at all.
2
1