AR-15 Pivot Pin Install - The Easy Way!
Вставка
- Опубліковано 6 тра 2012
- Installing the pivot pin on an AR-15 lower is never easy. In this video, we show you an easy trick to get the pin quickly installed.
Yes, we know the video is a little out of focus. Yes, we know it's pronounced "Cleh-vis" and not "Clee-vis". Blame that on our lazy Texan dialect :-)
If you're in the Austin area, please be sure to visit oldcannon.com
Simple video. 10years old and still a huge help! Thank you!
2 lost detent pins later, and some behavior I'm not proud of I come across your video.. Thank you Sir.
You are my hero. Just spent 15 minutes crawling around the shop floor looking for the spring.
cranesfc save that pin for a future build! When you find it build a new rifle? Lol
I REALLY appreciate you using the nomenclature that is on my lower parts kit. Many other guides use general terms for people who are already familiar with the parts... If I were familiar with them, I wouldn't need a tutorial. THANK YOU SO MUCH!!!
1 lost detent and some words that would make a sailor blush I did it. Thanx for the video had no idea about the clevis pin.
Your video saved my life from a lot of stress! $3 from Home Depot!😎 Thank you!
THANK YOU! I cannot believe it did not occur to me to search for tips and tricks videos before I already lost the only spare detent that comes in the kit.
Awesome tip. Thank you so much! My wife and I were trying to do this in a dry bathtub so the spring wouldn't constantly get lost.
Likewise!
Try the little bue pill.
Love it! I did a 300 Blackout build 4yrs ago and misplaced the Clevis pin. I couldn't remember what I used back then, so came back and found this video again.
This video was a freaking lifesaver! I was getting so pissed wasted well over an hour & gave up. Found this video, went to the hardware store & spent $1.36 & installed in under 3 freaking min! Thank you so much for this video!
Excellent! I picked up a 1/4" clevis pin but had to sand it down a bit. After that and a couple of tries (almost loosing the detent pin behind the stove) it worked! Thanks!
Okay I promised I would comment and like your video if it worked for me, and it did!
After countless times trying to do it by hand and *almost* losing the detent, I found your video and decided to try it out.
Worked flawlessly the first time. Thank you so much!
Thanks for the good info. I was at that stage of a lower build and realized I didn't have the pivot pin installation tool. This will really help, knowing there's an alternate way to accomplish the same objective.
Donsadlerjr, it's a 1/4 inch pin. I almost spent $16 on the special tool for this job. Instead I spent $1.50
And I bought a bag detent pins to replace the ones that flew all over the place.
Simple operation, and yet such sheer such frustration...Second only to the accursed BHO roll pin, perhaps. Thank for giving me and many others the easy way out. Much appreciated Old Cannon!
I appreciate your video. I've used the razor blade/knife 'trick' w/ success in the past, but starting w/ my current project - and in the future - I'll be using your method. Thank you.
I thought I was going to have to buy an expensive tool for this! I found a tool for only 2 dollars but I'd have shipping, and then have to wait, but because I heard about this I just went to my local hardware store and have this multi-use tool! Thanks!
I was having a bugger of a time getting my detent spring in for my takedown pin. Using this technique, but without the clevis pin, I used an extra takedown pin from the left side, but not capturing the detent in it's groove, then insert the right takedown pin, pushing the extra out of the way & rotate & voila.
Thanks for the inspiration!
This is freaking brilliant!!! Even with this tip, I still had a pin take a flyer, by the grace of whoever you pray to I found it and was able to do this easily the second time around. Thank-you for saving my neighbors from excessive profanity.......
use a business card to slide between the Clevis Pin and the spring, then install the pivot pin
Dude you just saved me by explicitly going over not having the track on the pin facing the detent right away. Thank you.
Terrific tutorial, I would add one thing: the spring and detent pin can still jump out of the hand, so assemble it all inside a ziplok bag to save the misery of having to look for the wayward pivot pin when it decides to jump out!
Great idea thanks
I can't believe I didn't look for this on my builds. Lost but found 3 springs using the blade trick to hold the spring to the lower. This is so much easier. Thanks.
I was able to do it this way and it was really easy. I found the 1/4 inch Clevis pin at the Home Depot for under $2. Thanks!
i just did this instead with the hole in the bolt catch. worked like a charm and is already included in a lower parts kit!
I just use an allen wrench and a guitar pick.
hold the detent down with the guitar pick, slide allen wrench in one side, slide pivot in normal, remove guitar pick.
Thanks for this! I just completed this using your method but with a credit card instead.
Dude, I know this is three years later but you sir are a genius. I knew playing guitar would come in handy 😁
So I bought a guitar so I can have a guitar pick... now what do I do with the guitar!? Lol good tip, thanks bro!
Brooooo you just saved me!!! Guitar pick was ingenius!!!🙏🙏🙏
Picked up the clevis pin for maybe $2 at home depot. Just installed today and holy jesus it was a breeze. Thanks
I thank God i watched this video. Im gonna get one from lowes tomorrow
Off to the hardware store next weekend. Don't know how many pins I've launched with my builds. This sure will make it easier. Thanks!!
Wow, this is my second build, but the first time following your instructions. This was amazingly simple this time around thanks to your video!
O.M.G. - Bought the clevis pin at Home Depot for $2.50, brought it home and had the pivot pin installed in less than a minute with virtually no effort. THANK YOU!
I did not have a clevis pin so I found a wooden dowel rod and drilled a small hole in it and it worked like a charm. I can see where the clevis you used would be a better option. Thanks.
You sir are a genius
Found your video popped up after I order the tool
Went to the store found one couple try's and I got it
Had to cut my spring down a bit but it works fine
Not sure if the spring hole was deep enough though it looked as my spring stick out as far as yours
Might have to visit ya when I come down for a visit when I go back to Conroe before I move down to Texas for good
Oh yeah I subscribed
I messed up a detent spring but had the foresight to buy a parts replacement kit ahaead of time before the build. This trick worked perfect for me.
Great video, I recently had to replace that spring and it took me and my dad about 45 minutes to get it done, great tip
HUGE help for my first AR build ever. TY!
Vey nice video, thanks for the extra little tip. Enjoyed the video clarity and ease of instructions. I have lost a few springs. Look like I will go to the hardware store today.
Thanks for the Tip...My Blood Pressure just dropped 20 Points...Merry Christmas....
You can use basically anything that fills the hole. I use an old pivot pin from the back side in lieu of the tool you have.
What was the "ah ha" moment for me was realizing I needed to put the new pivot pin in with the slot rotated away... I was putting it in with the slot towards the pin and I definitely lost a pin and spring because of that.
Thank you sir I whipped down to Home Depot and bam worked. Love it.
Found a wooden spoon in the draw, whittled it down to the right size, sanded it and drilled a hole in the handle, worked like a charm. cost me nothing. cant beat that
Brother, you saved me SOOOOO much time lol. Excellent video; I am now subscribed! Much thanks.
learned this on my second AR build. Very easy. Be sure to lubricate the channel of the pivot pin for a smooth operation.
Awesome idea u just saved me a ton of money just got it for $1.17 compared to $15 plus shipping
A never ending educational tool UA-cam. Thank you for the video.
Ended up using my pocket knife but still the video helped me get it into place. Thanks and earned a sub.
Thank you for sharing. Awesome solution. Worked like a charm!
I used needle nose pliers worked well, I’m curious does the pin need to connect with the first hole before the second one for it to work on the pin or is it fine for it to just connect with the last hole on the pin I saw other vids like this
This is genius. Thank you I will try it tonight. Man I have shouted some serious curse words trying this for the pass half hour! :)
awesome thanks bro, just went to ace yesterday and got it!
Great Vid! Straight to the point, love it
Thank you sir!!! Much easier!!! You are a gentlemen & a scholar!
Excellent idea. Thanks for sharing!
This is a handy tip. Thanks for sharing.
I can't believe that with all the AR projects I have worked on I never thought of doing this but I dang sure wasn't going to buy a tool just for this pin installation.
Great instructions great footage! Thank you.
I need some help, so I was trying to install the detent and spring with the pivot pin tool, the tool has a hole to put the spring and detent tool in and then another hole that doesn’t go all the way through the tool, when trying to remove the tool with spring and detent in the receiver the detent went into the other hole so now it’s under spring tension stuck in the tool, only way I see to fix it is by breaking it out, any ideas?
one of the best videos on youtube.
Not the hardest part of rebuilding anymore!!! Thanks a lot
This is a great idea. Thanks for posting. I subscribed to your channel and will check out more of your videos.
Thanks for the tip! SUPER helpful!
Thank you sir! This is very helpful.
Worked awesome thanks for posting!
Thank you so much. I got in two tries after watching this video. Thank you
Very cool! Good hack...for an over-used term
Now that's slick. Thanks for sharing
I did it to install my extended pin... works great
You can kind of do the same thing with the rear pin without taking the stock off. I just use a razor to pry it away a little bit and then use a very small punch to push it back into the hole while rotating the takedown pin. Then use something like in the video or an extra takedown pin to push through from the other side. Then follow the new pin through just like int he video.
But the rear one requires that the buffer nut be removed to access the detent spring for the rear pin. I just saw a video earlier about that but it did not go into detail. I got a pair of pins I want to install but am not near confident enough to do both! I do, however, have a better idea of how to do the front pin now, so thank you for that!!
Late reply but you can switch out the rear takedown pin without backing out the castle nut. Plenty of vids on YT to demonstrate the same. No special tools needed other than a spare takedown pin and super small flat head screwdriver (like for eyeglasses.)
I was able to hold the pin down with my fingernail, slide a bolt through it to keep it all compressed. Then quickly pushed the pin in. But this gave me the idea since I didn't have any fancy tools.
Thanks work great pit my first lower together this trick work awesome
Thank you this was super easy.
You're a damn genius! Awesome trick
great video. thanks it helped a lot!
Just went and bought my Clevis pin. Paid 1.15. Not building a rifle at the moment but itll sure go in my tool box. Had a hard time building my ar10 cause of that front detent
Saved me a lot of heartache. Thanks!
Outstanding video
You're a life saver thank you.
great idea thanks for video saved alot time and effort
Some hero's don't wear capes.... thank you sir!!
Excellent information and presentation. + sub!
Great video!
I use two of those fancy tools, which did not cost much---nine on amazon, but very good video.
Just bought 1/4 inch clevis pin at HomeDepot , $1.57, will try this method. Thanks
Awesome video!
Brilliant, now all I need to do is find the half dozen detents in the carpet.
Great how to.. just got a sub just off of simplicity..... God bless you
I've never had a problem just using a razor blade to push the detent down, but I might get one of these to try
You my kind sir are a genius!
Some LPKs include an extra detent and spring, in case you lose one.
thank you thank you thank you thank you thank you for the "MICROSCOPIC" view of wth is actually happening, as I don't even have my lower yet, and could not see where everyone else was shoving their detent pins! Thanks again.
What size diameter clevis to buy?
Yeah I bought the wheelers tool. Does the same thing
Great tip saved me 10 bucks thanks
I just used my punch to apply pressure and transferred the pressure using the pivot pin. In fact it was easier for me to do the pivot pin vs. the take down pin lol. I accidentally used the pivot pin in the take down slot, so had to swap that out and before that I had the pin inserted on the wrong side so it wouldn't come out! haha. Anyway, I got it all together and I laugh at how easy it was in the end.
However, this tool would have been nice, either way.
I have built maybe 10 lowers now, and managed to do all the pivot pins without losing a piece, and no special tools (think I used a credit card a few times). But lost a detent last night and said, there must be a better trick. This seems to be it.
Thank You Huge! Lol I was cursing 🤬 last time I did this process chasing springs and detents all over the room. DOH!
If you are really careful a allen key big enough to fit the hole with some play to it would work just fine
You're bad ass! Thank you! Great video
Thank you for this! Still using this in 2024.
What size is the clevis pin?
Just built my first AR today and I did this part with a tiny flat head screwdriver and it took like 15 seconds 😂 all the UA-cam videos made it harder and needed unnecessary equipment 😂