Hi. I'm very new to drones and especially to tinywhoops. I have Meteor65pro. But it feels too responsive and too edgy mostly for altitude/throttle. Should I fix/reduce some parameters or its only lack of skills to fly it smooth? What would you suggest? Thank you in advance!
Of course! You can apply throttle and axis expo, it will smooth out the center, also lower your rates so exactly sensitivity will decrease. Later when you will gain more skill you can then raise rates and change expo to less. To maintain same altitude and not bounce is mostly skill factor and throttle control so also you can pratcice and just don't stop flying and you will get better over time :)
Really cool bro! I'm not a pro, and I got a question I'm planning to buy hdzero google can Iink the googles with this camera? I'm still deciding about fatshark hd2. 1 or hdzero but sounds hd have more advantage? Thank you
Hi! Pro? I'm not one also :) But HDZERO goggles are amazing, if you have money they are middle sweetspot between digital and analog. Very good for analog (Tdog is using them) And also of course you can go HDZero digital :) Only downside that they are pretty big
@@grox3857 well you know how to build good drones, flying you're like a pro haha Well I'm thinking about these 2 googles, I already got a dji v2. I'm trying to decide between hd2.1 and hdzero, what you think? both are the same price I guess.
@@grox3857 ohh I see, which one you recommend? I can see many quad using analog system and it's cheaper than hdzero system right, at the same time penetration with hdzero sounds bit lower than fatshark? Or should I wait until end of the year and stay just with my v2?
@@_77LK HDZERO goggles are better than fatshark, because they can do both systems, digital at full 100FPS and Analog. If you have more money, go for the HDZERO goggles
Thanks for the detailed Explanation! Nice build! Just one Question: Do you need to set the VTX Table or you just use the FC Betaflight settings it comes with?
whats your googles aand setup on them? Im trying to get back to hobby with only tinywhoops and I am wondering which google should I buy to have decent video
Thanks! Not only baterry performance stand for this good result. Low weight, biblade propeller, bigger duct. Very very efficient build with good punch here. That's the reason why I made this tutorial❤
@@grox3857 Thanks! I've got 2 more questions. Do you prefer acro or angle for tinywhoop racing? Could you pls make a video on how to set up and tune this drone in betaflight?
If you are new with soldering, I recommend first to learn how to solder, and pratcice on small pads of other electronics, or broken fc's if you have some. This is important because you will reduce risk of doing bridges and burning vaulable stuff.
wpadłem jeszcze raz bo "kiedyś" gdzieś widziałem podstawkę do lutowania XD. Jest gdzieś ogólnodostępny stl? 00:24:12
The level of control you get with these whoops is insane. Great build video.
Thanks! Just keep flying bro❤
Please do a tutorial on how to make the light power connector. Thanks!
Thanks for the tutorial - lots of valuable tips on building a high-performance racing tiny whoop.
"My skill is not very good"
Bro... they are excellent
Im flying this same build for almost a year with same 1610 biblades cutted to 35 but with hdzero. its great
Nice build enjoyed every minute looking forward to more in the future 🔥
Hi. I'm very new to drones and especially to tinywhoops. I have Meteor65pro. But it feels too responsive and too edgy mostly for altitude/throttle. Should I fix/reduce some parameters or its only lack of skills to fly it smooth? What would you suggest? Thank you in advance!
Of course! You can apply throttle and axis expo, it will smooth out the center, also lower your rates so exactly sensitivity will decrease. Later when you will gain more skill you can then raise rates and change expo to less. To maintain same altitude and not bounce is mostly skill factor and throttle control so also you can pratcice and just don't stop flying and you will get better over time :)
I want that flight controller soldering stand!!! 😍
Amazing!!! Mega pro work and explanation!!!
Thanks!!
Sheshh!!!, your technique and ways is same as mine love it
UR still learning?Like for what Master Apprentice Jedi?Nice flying man.
Really cool bro!
I'm not a pro, and I got a question I'm planning to buy hdzero google can Iink the googles with this camera? I'm still deciding about fatshark hd2. 1 or hdzero but sounds hd have more advantage? Thank you
Hi! Pro? I'm not one also :) But HDZERO goggles are amazing, if you have money they are middle sweetspot between digital and analog. Very good for analog (Tdog is using them) And also of course you can go HDZero digital :) Only downside that they are pretty big
@@grox3857 well you know how to build good drones, flying you're like a pro haha
Well I'm thinking about these 2 googles, I already got a dji v2. I'm trying to decide between hd2.1 and hdzero, what you think? both are the same price I guess.
@@grox3857 ohh I see, which one you recommend? I can see many quad using analog system and it's cheaper than hdzero system right, at the same time penetration with hdzero sounds bit lower than fatshark? Or should I wait until end of the year and stay just with my v2?
@@_77LK HDZERO goggles are better than fatshark, because they can do both systems, digital at full 100FPS and Analog. If you have more money, go for the HDZERO goggles
Lightest vtx - NameLessRC nano400 (0.7 g)
Thanks for info, need to test it out!! :D
Thanks for the detailed Explanation! Nice build! Just one Question: Do you need to set the VTX Table or you just use the FC Betaflight settings it comes with?
Yess, ovx300 vtx table is opensource and you can get it from Happymodel Site
Thanks mate 👍
Will be better if you put de links of purchase of the components....😊
whats your googles aand setup on them? Im trying to get back to hobby with only tinywhoops and I am wondering which google should I buy to have decent video
Nice video for the community!
Thanks! :)
broooo what battery u use? 3 min ++ fast flying so insane!
Thanks! Not only baterry performance stand for this good result.
Low weight, biblade propeller, bigger duct. Very very efficient build with good punch here. That's the reason why I made this tutorial❤
Lipo used and power system with more details in description :)
Nice! Great tips thanks for sharing 😊
Nice 🙂👍🏻
@@NOT_NOW777 Thanks! Next vid with fresh tinywhoop build will be soon!!
Did u solder different wires to the camera than the stock ones? My camera came with very thin wires and yours are thick.
Yes, C03 comes with very fragile and stiff wires, I always swap them to elastic and durable 32AWG Silicon Wire with T7000 On top of solder pads
@@grox3857 Thanks! I've got 2 more questions. Do you prefer acro or angle for tinywhoop racing? Could you pls make a video on how to set up and tune this drone in betaflight?
Awesome video man
Thanks a lot Man, I'm watching your videos too :D
@@grox3857 aaww thanks my bro! Really appreciate the love!!
Great video thank you.
Nice build dude
GREAT BUILD❤❤❤
Thanks! :)
What is the size of the squares you fly through?
Regular square 45cm width and height but gates at the race events vary, usually from 30 to 50cm it depends.
Just bought this exact setup im terrified of saudering it.
If you are new with soldering, I recommend first to learn how to solder, and pratcice on small pads of other electronics, or broken fc's if you have some. This is important because you will reduce risk of doing bridges and burning vaulable stuff.
@@grox3857 more flux is what I've been doing haha
dobra robota! 👍
Nice tutorial
Nice video bro keep up the great work 💯 🫡
Thanks! ;)
What do you think about this build? You can write here :)
nice😁
betaflight config video ?
How much it cost?
BETA F4 AIO: 40$
OVX300: 28$
SE0702: 30$
C03: 20$
65PRO FRAME: 5$
Tks for share 👍
dude start building ill start buying okay?
Can't say ,"Take my money"....fast enough.,,,
Right
I’ll pay $200 +shipping