Thanks for the plans man, my cuz is so lazy when I asked her to get me a list of materials and tools needed for the project, THAT SHE STATED SHE WANTED TO BUILD. She sent me three videos and this is the only one that provides the schematics.
this is bad ass Rick ! searched how to build one of these on YT and didn’t expect to see my man RICKY ICE showing me how it’s done ! thanks brotha ! 🤘🏼🛹
I’m was about to make one for my channel but I’m only gonna use scrap wood old and scrap furniture to make mine, I also want to improv for anyone who doesn’t have coping or bedframes
"Alright I reckon that's it..." Bro... you just ripped the shit out of that ledge! You made your own skate spot, then instantly shut it down haha Awesome video 🔥🔥
nah i think around 30 is good, you dont want it too high that its a hassle to skate, you could always raise it up on some bricks quite easily but never lower it :)
Hey mate loving the content you've been bringing out. Just a question about the coping where did you get the angle iron from and how thick is it. Cheers bro
I recently built a grind box but the angle but the plain steel angle is too sharp and doesn’t allow me to grind properly, I’ve grinded it diferent times and still the same way, any suggestions ? Thanks in advance
Hey man, sick video. Was wondering how the stickers held up/ slide. We have just coping and straight Masonite for our top sheet, which slides much better than plywood but still sticky for certain tricks. Would you say the strikers are worth doing or so they rip up quickly and end up making a mess ? I just wanna slide yo 😭 grinds are perfect haha
A fun experience I would recommend, are you gonna build one?
No
@@myguy6163 rude
Yeah during next 6 weeks of lockdown
@@penguinshooter2133 get in early so you can skate it!
Yesss!!🤗
Did he mention the measurements of what he cut and What kind of wood it was? Or even what kind of angled iron he used
I absolutely love this guy’s energy. He makes me want to learn the tricks he does
Great! Looking very solid. That blunt kickie out man!!
yeah so fun to make and skate :)
Agreed!
So cool to see you here cuckoo!
Awesome box and even better skating! Didn’t expect you to shred so hard! I’m going to use these same plans, so thanks for the quick and easy tutorial!
Bro you killed that box session. I’m about to try and build this!
I just rewatched your lakai fully flared part ! I’m 26 and I watched it my first time like ten years ago. U rock.
lol at the music!
sick blunt kicky out dude damn. nice vid!
haha thanks it just felt right :D
Thanks for the plans man, my cuz is so lazy when I asked her to get me a list of materials and tools needed for the project, THAT SHE STATED SHE WANTED TO BUILD. She sent me three videos and this is the only one that provides the schematics.
DUDEE THAT'S CREATIVE!!!!
Your videos really encourage me to start skateboarding, love your tricks btw!!! 🖤
hey ricky can you maybe do low budget tutorials like cheapest quarter pipe, rail, stuff like that
yeah that could be a fun idea!
I definitely want to give this a try, may be a project for this winter
Thanks for all the details to build it! Love that box i will wprk on it
Paint the coping for a better slide.
Also, add an old pair of trucks to one side at the bottom to wheel the box around easier.
I'd love a 'My War' style video about the crooked grind impossible on the ski jump rail.
@rickyglaser
yeah ive been meaning to make that for awhile!
What screws did you use
Sick! When i get older i will start building my own ledges and ramps!
Absolutely filthy. Nicely done dude.
What is the width and the height of your box?
Dude you DEMOLISHED that ledge holy shit what a bag of tricks to test it out!! This came out really great :0
About to start my quarantine box!! Thanks my guy ✊🏻
Nice build and very impressive riding! Gonna build one with my son!
Have fun! Send me a pic on instagram
Nice touch with the stickers.
Awesome video and some solid ledge tricks !!
Been waiting for something like this, thanks for the video 🔥
That help me a lot thanks man 😅
Do you know how much it costed in US dollars
Thank you for your work and sharing. I think it played out very nice.
And you skate pretty good
Respect ;)
this is bad ass Rick !
searched how to build one of these on YT and didn’t expect to see my man RICKY ICE showing me how it’s done !
thanks brotha ! 🤘🏼🛹
I’m was about to make one for my channel but I’m only gonna use scrap wood old and scrap furniture to make mine, I also want to improv for anyone who doesn’t have coping or bedframes
Looks good man. Good job
Awesome video Ricky have a great day 😊😊
thanks you too!
Masonry board is one of best types of “wood” (almost laminate) to build DIYs
I respect ur vids man, keep going
Very cool Ricky, hope you found a good home for it when you got the call to come over here.
I gave it to sheezy :)
@@rickyglaser cool cool.
whoa! You destroyed that box like nothin! Amazing
"Alright I reckon that's it..."
Bro... you just ripped the shit out of that ledge! You made your own skate spot, then instantly shut it down haha
Awesome video 🔥🔥
Now add a little ramp to one of the sides! That would make it perfect
Great initiative
Bro I figured out that you are not just a skater but your a builder
A guy who probably rides handrails says he's afraid of the danger of power tools. I love it.
Nice bro...from Bangladesh
Love the music lol!
Yeah stuck in same lock down situation was set on making one. Thanks for the inspiration. Are u still happy with 30cm height or wish it was bigger?
nah i think around 30 is good, you dont want it too high that its a hassle to skate, you could always raise it up on some bricks quite easily but never lower it :)
well done bro
Nice job man! May I ask what camera you film with?
God dang it I love ledges, I didn't expect a how to from you that was unexpected, I just searched "how to make a skate ledge". Sweeeeet. (F)
f
Did you counter sink to make the screws in the coping flush???
Damn fool. You threw down on that shit!! Nice job 👍
Yes actually thx this helped a lot
one more subscriber 🇧🇷
Thanks for responding to my comment on TikTok 😁
That looks awesome!! Where did you get your coping?
What thickness angle iron did you use???
Hey mate loving the content you've been bringing out. Just a question about the coping where did you get the angle iron from and how thick is it. Cheers bro
Very nice👊
Nice
I recently built a grind box but the angle but the plain steel angle is too sharp and doesn’t allow me to grind properly, I’ve grinded it diferent times and still the same way, any suggestions ? Thanks in advance
@rickyglaser which material is the coping? I am ready to order my wood but dont now which coping to use? Can smdy help meß
Hey man, sick video. Was wondering how the stickers held up/ slide. We have just coping and straight Masonite for our top sheet, which slides much better than plywood but still sticky for certain tricks. Would you say the strikers are worth doing or so they rip up quickly and end up making a mess ? I just wanna slide yo 😭 grinds are perfect haha
yo ricky, what was the exact material did u use? i live in SA and I'm wondering if I could get the exact same material from bunnos. cheers
hey do u mind sending the full material list ?
Did it held up good ?
Add some roller wheels for easy pikup and go.
Ricky glizzy
went stupid! Nice ledge nice bag of tricks
Goated
Where can you probably find the wood for free?
U should to a nose slide to Manuel kickflip out
How it holding up after a year dude?
i moved away and gave it to a friend, i think sadly they didnt love it like i did haha
I´m gonna build this. But I really want it to fit in my car without folding the front seat. Does it work as well if I only make it 180cm long?
Maybe go to a skatepark with some chalk and make an outline on a similar ledge to get an idea how it will skate, good luck
is the top sheet MDF? is it super heavy?
or I could keep watching the vid and eventually bet my answer :)
i think so, yeah it is a bit, ur for sure better off with plywood but this works decently well too
I built a mini ramp once with my dad
awesome!
@1:28 the power bricks🤣🤣🤣🤣
💯
perffect !
What suburb u in?
Muito foda mano, admiro seu trabalho e sua habilidade!
YOOOOO you aren't wearing tan shorts!
hahah yeah :D
Yea mate
Redic grind skilz
ricky kinda looks like Layne Staley
Bruh I’m legit following this video rn it’s pros not gonna be as good but meh
awesome! send me a pic on IG when u finish it!
Inspect the 2x4s before you buy them next time, those things are beat
Hi
winner :)
Try make it a bit more smooth
Yewwwww
I'm from Brazil and I'm going to do the same
My favorite part is that he always wears shorts lol
He’s wearing pants and not shorts I cant
Pls pin this
;)
Built, slaughtered.
F
Hey Ricky how many likes do I got to get on this comment to get a free Ricky glaser deck🙏
F
F
F
F
F