Seized Audi 3.0 TFSI Full Breakdown | What Caused It?
Вставка
- Опубліковано 6 січ 2024
- Bought this 09 Audi A6 with a seized 3.0T engine under the guise that it just needed a starter or an access module to activate it. The previous owner replaced the starter and still nothing when turning the key over. Turns out the engine was seized and that's why the starter wouldn't rotate the engine.
In this video I will be tearing down the already removed engine and finding out exactly why it failed. We will also be cutting the lower girdle off to remove the torque converter since its seized and won't rotate to allow access to the bolts.
This is part 2 of a 3-part series consisting of a removal video, a teardown video, and finally a reinstallation video with a freshened up used engine.
If you have an Audi A6 C6 check out this playlist for more repair videos -
• Audi A6 C6 Repairs & Maintenance - • Audi A6 C6 Repairs & M...
I'll likely be using eManuals online repair guide a lot for this car. Trust me, it's the secret weapon in every DIY'ers arsenal. Check out the link below and let the repair magic begin - shrsl.com/43l4o
And a special shout-out to all you wonderful supporters out there. If you happen to click any of my custom links and buy a product, I'll do a little happy dance and earn a small commission, all without costing you a penny extra. Now that's what I call a win-win!
Thank you for watching!
#AudiA6C6 #AudiA6 - Авто та транспорт
Thanks!
My 2nd super thanks ever gifted! Much appreciated, thank you @mbergheaud 🙏🏻
@@Mechani_Cole Thanks for the excellent content
German Engineering at its best, what a nightmare. I accidentally stripped my torque converter bolt, and then my nightmare began. Thank you for sharing your experience
This has to be why they lost 2 world wars right? Haha! I've totally stripped a TC bolt before too and had to pull the converter out with the engine. What a pain in the ass! We're you able to get yours off?
Helppp plsss!!! I just stripped mine and I have no idea what to do
@@Mechani_Colepls help me! Mines are stripped , I got one out
Get an extractor kit like this - amzn.to/3Rwsyls
@shh.4490
@@Mechani_Cole I dooo, but no luck! 😔 I tried a air hammer and welding but no luck
Bright side, now you know more about these engines visually and hands on. Good experience I think.
Impressive work! Such a complicated project. Glad you finally got the torque converter off!
Got a no start low compression A6 3.0 TFSI. Gonna do a complete overhaul anyways tomorrow 🫡
so many timing chain tensioner makes owner poor.
Did you ever put the new engine back in? I was looking for the next video, I am getting ready to install engine assembly in my a7 that was seized and was curious about the fluid lost from the tranny. Wondering if I should pre fill torque converter?
Just about to put it in the week hopefully. If you lost fluid, you can just top it off a little either before or after
Great videos as always, can you share what repair manual you are using for jobs like this. Thanks
@MilanDisljenkovic I uses these
eManual Repair Manuals for Any Vehicle - shrsl.com/43l4o
@@Mechani_Cole thank you so much and keep up with good work.
Am thinking to get a Q7 sline prestige I tested drive it already it has the same engine but to be honest Audi vw cars are beautiful
That's our next car. Been wanting a Q7 since we had a kid and need more room. Try to get 2014 or newer if possible. Less issues from what I'm seeing. Much more updated than this 09 3.0 for sure.
Only things I've heard is they go through tires and brakes quickly due to their size.
If the motor is in fit condition then it is not a problem but the work for this scrap... a used one which rotates cist around 2000 Eur so i think is the work not worth to diassemble this scrap. But for a Video is great 😂
Appreciate the comment! It's up and running and driving now. Video coming soon🫡
do you work on your vehicles only? which state are you in?
@ammreid I work on other cars too. I'm located in Las Vegas
@@Mechani_Cole damn..way to far..thanks and good work!
How many hours did it take to pull the engine like that
I'd guess about 3 hours max
Was what the head bolt pattern
For removing? Or for the shape of the head of the bolt?
I'm just think of what to do to precent mine from similar scenario.... I think changing oil at 4k miles, new PCV, thermostat, checking the charger cores......and yet still an injector might burst into a cylinder... :)
Yeah for sure, or the HPFP can fail and leak gas inside as well.
@@Mechani_Cole Yeah, I forgot about that also :( And even I have a bit of a slow start witch might be the HPFP exactly... I don't know if it's financially sound to do all of that for prevention only...
My 2012 A6 had a gas smell on the oil, and slow crank in the morning, changed hpfp and solve issue..running great now. 120k miles and next I'll do apr coils...and probability stage 1
@luiszubillaga1463 I've heard that is a common issue for sure. I'm pretty sure on this engine the supercharger packs leaked coolant into the engine and locked it up. Good thing you caught yours early enough✌🏼