Been looking at this kit, with the complete CNC kit, how did you find their CNC parts? Any part of the kit you would change out? I've read bad things about the fans and the hotend, how did you find them?
I wasn’t a fan (hah!) of the fans or hotend but that’s all, everything else worked great and the majority of this kit is still going strong :) I love my 2.4 and it’s by far my most reliable printer.
@@tjcarr70 I'm afraid i can't help on that one, for me there was no duties due, but i ordered via Ali Express where they collect tax upfront upto a certain amount, i think my discount on the kit may have put me below that threshold and so the tax was collected. You might be better asking this question on the Fysetc discord for other 'normal' customers to answer.
I've already built the kit and its brilliant, i'll be posting a review video soon :) just putting it through its paces, but i can say, nothing in the kit has failed or been an issue, excluding the CNC TAP, that wasn't great but i had no intention on using it anyway but fitted it to try it out.
The small black 'feet' with the peek (plastic) screws are standoffs for the bed (BOM uses upside-down thumbscrews) - this gives the bed some room to thermally expand without warping. Then you don't need to do the one screw tight, two screws somewhat tight and one screw fairly loose thing.
@makermylo I'm waiting for the regular kit to arrive in a few days. This will also be my first 2.4 build - I have built a v0.2 which I will use to print my parts.
@@mathijsb28v Thats exactly how i did it :) Built the V0 with a printed parts kit to print my 2.4 parts, which ironically enough, as we speak is printing parts for my next v0 build.
Been looking at this kit, with the complete CNC kit, how did you find their CNC parts?
Any part of the kit you would change out? I've read bad things about the fans and the hotend, how did you find them?
I wasn’t a fan (hah!) of the fans or hotend but that’s all, everything else worked great and the majority of this kit is still going strong :) I love my 2.4 and it’s by far my most reliable printer.
sir you are the best. I was looking for a review! Greetings from Greece
Thank you :) A review is coming soon.
What about VAT and import duty here in the UK? Would love not know before ordering.
To*
Great video though, thanks.
@@tjcarr70 I'm afraid i can't help on that one, for me there was no duties due, but i ordered via Ali Express where they collect tax upfront upto a certain amount, i think my discount on the kit may have put me below that threshold and so the tax was collected. You might be better asking this question on the Fysetc discord for other 'normal' customers to answer.
Just got this kit as well, id love to hear your thoughts after building
I've already built the kit and its brilliant, i'll be posting a review video soon :) just putting it through its paces, but i can say, nothing in the kit has failed or been an issue, excluding the CNC TAP, that wasn't great but i had no intention on using it anyway but fitted it to try it out.
The small black 'feet' with the peek (plastic) screws are standoffs for the bed (BOM uses upside-down thumbscrews) - this gives the bed some room to thermally expand without warping.
Then you don't need to do the one screw tight, two screws somewhat tight and one screw fairly loose thing.
Thanks! I had actually figured this out during the build, this being my first 2.4 left me somewhat baffled! but i got there in the end!
@makermylo I'm waiting for the regular kit to arrive in a few days. This will also be my first 2.4 build - I have built a v0.2 which I will use to print my parts.
@@mathijsb28v Thats exactly how i did it :) Built the V0 with a printed parts kit to print my 2.4 parts, which ironically enough, as we speak is printing parts for my next v0 build.
Hope the review video comes soon, just ordered one for $700USD
What a bargain, the build was uneventful and the printer just ‘works’ so I never got around to filming a review video of this machine :)