For the sake of your car, make a template out of cardboard first, and cut it as one piece. 9 times out of 10 you can flip the template and it will fit the other side like a glove.
Good option but first, the holes need to be treated to prevent rust by painting them and using antisieze lubricant with screws. Second, don't use phillips screws, use hex heads instead. When the screws get rusty, removing them may become a big problem.
Super simple and clean as hell. Great idea. Had to chop everything out of my sti for a carbon varis kit. This is going to make everything underneath look finished again. Thank you.
Looks awesome! Going to have to do this on a car I recently purchased - it's super clean but some of the shields are missing, and of course those are not easy to find anymore. What thickness did you use and where did you buy it?
Quick tip you can get a straight edge and razerblade a line bend it and it'll snap, a lot easier and less time consuming then cutting. Worked in a place with all sorts of plastic sheets and did that all day
Bro here in india chevrolet is closed so my chevrolet beat fender lines becomes sooooooo much expensive right now soo i will definately give it a try bro thanks.. simple sweet clean video bro
How thick was that? And where do you buy sheets of that. I want to do my front wheel wells and under flap that goes under the bumper and to the front of the bumper. The flap always gets eaten away from.asphault when loose. What store you buy it at
I'm from the UK need to buy some sheets to make some arch liners for my sons Renault clio v6 replica. It's all done but cant get anything to fit the wheel arches as they are now extremely wide so have to custom make some arch liners. Can you send a link for the store that I can purchase this item from. Thanks and keep up the good work bro
Nicholas Clark oem fender liner won’t work because the new front bumper is wider. We were able to use this plastic on 2 cars for $40 and we still have some to spare for other projects.
Just priced Landcruiser 200/series liner $260 right side and $190 left hand side. Not cheap. I will do this but screw into existing screw holes available. Thanks for clip man
How thick the abs is it , I hope you answer my question because I read the someone already asked you the same question and didn't get an answer from you.thank you.
Local shop that sells the material. I'm sure you can find a shop near you that will sell it. Or you can buy it from home depot and get it shipped to you but it's more expensive from home depot.
As soon as I saw you drill holes in your frame I quit watching to type this. That was a stupid thing to do. I am not trying to insult you but that will make it rust and give it weak spots. How many kids are going to drill holes in the frame of their rice burners now.
Did you really just self tap those into the body of your car, no painting or anything... the rust you just blew out is going to be no comparison to what's going to happen to that car body in a few years... stupid.
Jell Alleyne this material is actually thicker than regular fender liner. Also works just as great if not better. People please don’t call something cheap cause you’re too lazy to try it.
For the sake of your car, make a template out of cardboard first, and cut it as one piece. 9 times out of 10 you can flip the template and it will fit the other side like a glove.
Good option but first, the holes need to be treated to prevent rust by painting them and using antisieze lubricant with screws. Second, don't use phillips screws, use hex heads instead. When the screws get rusty, removing them may become a big problem.
^^^^^^^^This disclaimer will save you / someone else SO much hassle down the road! ^^^^^^^^^
Wow! Good thinking!!!!❤
Where did you get the Abs plastic?
Music is always on point man. Love it.
Thanks man! Haha
Just awesome! I am sold. After seeing what you did, I am going to do something similar to my subaru legacy
Nice job! I was just contemplating if I could do my own liner since some OEM liners for my truck are so expensive!
Goodluck!
Thank you! Everyone shows how to cut the fenders but almost all the widebody videos skip the weather proofing after lol. Thanks for this
No problem!
Where do we get the ABS plastic during lockdown????
Super simple and clean as hell. Great idea. Had to chop everything out of my sti for a carbon varis kit. This is going to make everything underneath look finished again. Thank you.
Don't do this if you haven't yet. Get felt thermoformable polyester sheets.
What thickness did you use?
very neat...gonna rust. consider treating the holes to help slow it down.
Painted the holes after someone told me
Where did you buy the abs plastic? What kind of editing program are you using to make your videos and what do you film with? 🎥 thanks!
Looks awesome! Going to have to do this on a car I recently purchased - it's super clean but some of the shields are missing, and of course those are not easy to find anymore. What thickness did you use and where did you buy it?
No way he liked it and didnt reply....
Where’d you get that plastic you used to make the liner?
Quick tip you can get a straight edge and razerblade a line bend it and it'll snap, a lot easier and less time consuming then cutting. Worked in a place with all sorts of plastic sheets and did that all day
Or snap it off a table
Bro here in india chevrolet is closed so my chevrolet beat fender lines becomes sooooooo much expensive right now soo i will definately give it a try bro thanks.. simple sweet clean video bro
Where did you buy that materials?
Thanks man
How thick was that? And where do you buy sheets of that. I want to do my front wheel wells and under flap that goes under the bumper and to the front of the bumper. The flap always gets eaten away from.asphault when loose. What store you buy it at
Where to get this plastic? Nice.. I thought this kind of job was impossible! 😂
what's the sheet thickness You used? thanks
Thanks for this dude, my lancer lost its lining for its front right wheel and cant find any replacement parts.
U can find this on ebay bro is like 25$ bucks
How has the ABS held up near the motor? Any issues with warping or melting?
How thick of abs plastic is it? I got to do this to my car to make some new ones. I just have to find out how thick
It sure of the thickness just ask for a material that is flexible
This will make your wheel arches rust with all that drilling
I wondered that. Couldn't you just use the existing holes?
@@soapsoilandsunshine3241 yes or you could spray the newly drilled holes with a rust inhibitor.
Already done thanks guys
how many mm is the tickness of that abs sheet?
I'm from the UK need to buy some sheets to make some arch liners for my sons Renault clio v6 replica. It's all done but cant get anything to fit the wheel arches as they are now extremely wide so have to custom make some arch liners. Can you send a link for the store that I can purchase this item from. Thanks and keep up the good work bro
Epic!
Where u bought the ABS plastic , I cut my liner to fit 35 tires on my truck and need to cover now
Thanks for the video. I need to do this to my escort van cosworth replica
WHy not use a heat gun & bend/ crease 1 piece!
Where did you get the material?
Almost at 1k bro!
The Snyds I know I Can’t wait! My new year resolution for 2019 was to get 1k subs so hopefully I can get it before the end of the year.
@@JRevs your forsure gonna get that man 👊
hmm might have to do this with the WRX i just bought... or just order one.
Hi My name is Greg and did you use automotive grade ABS plastic for the inner liner?
Thanks
How thick was the abs you used👍🏿
Can u tell me what the thickness abs sheet can use
Yo gj man and ty, this is a great video. How has it been holding up. And are you. More aerodynamic?
It’s holding up well, no problems and I didn’t do it for aero dynamics just to keep dirt from the headlights haha
@@JRevs where did u buy the product from link if possible ty sir
Where can I buy ABS plastic?
Thank you so much for your video
Where do you get the material??
But wouldn't it just be so much easier to buy a new fender liner for like 25 bucks? Was this method more cost effective?
Nicholas Clark oem fender liner won’t work because the new front bumper is wider. We were able to use this plastic on 2 cars for $40 and we still have some to spare for other projects.
Just priced Landcruiser 200/series liner $260 right side and $190 left hand side. Not cheap. I will do this but screw into existing screw holes available. Thanks for clip man
2 stands+ jack ........ok safety approved, i will watch the rest
HAHA! Always staying safe
What material u use?
Yeah I’m not paying 80 bucks plus 20$ shipping for a piece of plastic imma give this a try
What the material?
insta like because it's an evo
Bro why did you use self tappers
How thick the abs is it , I hope you answer my question because I read the someone already asked you the same question and didn't get an answer from you.thank you.
March I’m not sure what the thickness was but it was probably near 1/4”
March it doesn’t look like it’s quarter inch. Maybe 1/16 or 1/8 but definitely not a quarter inch
@@oscarrosado8706 lmao 1/4 plastic abs lmao
God dam door bell going off on the back...
Where did you buy the abs plastic ?
Local shop that sells the material. I'm sure you can find a shop near you that will sell it. Or you can buy it from home depot and get it shipped to you but it's more expensive from home depot.
Should've started at the top of the inner fender, like a roof, and work your way down.
But then water runs down between the gaps....you start at the bottom then go.to the top so it runs onto the next layer
Where do u find the abs plastic sheeting please?
It was a local store near me that sells it I don’t remember the name but try searching “abs plastic near me” and see what pops up
@@JRevs Thanks I found a stiff rubber door mat at home depot for $2.54. Two of these can be cut to fit and are weather proof.
What is this material
Abs plastic
I would not want to drill holes onto my car like that without anti rust
Mahindra Bolero mein bhi yah problem hoti hai
damn...you are handsome
Maybe template with cardboard or poster-board first next time
I’ll try that thanks!
Dude this honestly looks like $hit
Whats your instagram ?
Yeah it’s @jrevs.jpg
W T F ?????
As soon as I saw you drill holes in your frame I quit watching to type this. That was a stupid thing to do. I am not trying to insult you but that will make it rust and give it weak spots. How many kids are going to drill holes in the frame of their rice burners now.
Did you really just self tap those into the body of your car, no painting or anything... the rust you just blew out is going to be no comparison to what's going to happen to that car body in a few years... stupid.
Lmao people please don’t be cheap when it comes to your car !
Jell Alleyne this material is actually thicker than regular fender liner. Also works just as great if not better. People please don’t call something cheap cause you’re too lazy to try it.
Lmao Jell alleyna Finance baller alert I bet your super rich
Nice customizing, but I don’t want screw heads showing on the exterior of the car
I didn’t drill through the fender 😂