Thanks for the video. To get the shifter knob off I used a 3/8" open wrench and levered it up on a piece of 1" thk wood while twisting the knob. No scratches anywhere
Very helpful! I bought my daughter a 2010, and it looks like the entire 7-button and DIS knob control center is not functioning (after replacing a 25amp fuse under the driver's side of the engine compartment to fix an issue with the acc ports). The knob and all the buttons were working fine before the fuse replacement, but looks like I may need to replace the unit. Do you mind sharing the link of the Ebay seller? Was there a single fuse or breaker that protected this assembly? Thanks in advance for any help you can give.
Hello there Steve. The item I purchased is "Center Control Panel OEM 96540-3M300_K Hyundai Genesis 2008-2013" if you type in that on ebay should come up with the seller ucon-tec. Looks like they're from Korea and my item came in pretty quick...I want to say within less than a week! I looked up the pre-GDi set ups and the consoles looks to be the same as mine so your 2010 so it should work. I just am not positive if this will resolve your issue but it sounds to me like it should. Mine was a non response knob. Left and right worked .but scroll didn't not. Also the enter (push down) was very finicky. The scroll was completely shot which meant all I could get to were the very top and very bottoms of each menu. Obviously this made navigation useless because I couldn't put in addresses. Worth a shot...looks like the company still has some. And I'm not really sure about the fuse..I didn't touch the fusenbox at all. Fuse issue would (if fuse indeed) cut out all power to the module...which would mean it wouldn't be lit ...wouldn't work all together.
@@stevesullivan3310 sounds good. I reread your post ...yeah if it's still getting power than I don't think the fuse replacement was the issue that broke it ..however it's odd that it happened right after you swapped out the fuse. None of the functions on the DIS assembly does not work ?
@@stevesullivan3310 there is only one wiring harness that leads to the DIS assembly and there are two other wires which I believe were for the heated/cooling for seats. Didn't find a fuse that was anywhere inside there but I could be wrong 😸
@hmr1979 thank you for this video! been struggling with the DIS knob in my 2012 and was wondering if it was a fuse or the knob itself. will do both as my USB/AUX ports are behaving strangely as well
@dwayne965 you're welcome..am battling currently the front power outlets not working. Someone told me it's in fuse box in engine compartment. A 20a fuse. Mine is in good though. So am not sure what it could be
I havre an issue with the radio going to usb ok its own. No matter if on radio or cd. Its annoying. What could be causing this and is there a fix? Also, is there a way to reboot the stereo system?
You can reboot the unit by going to ENG mode and go into the audio settings portion and reboot that way. UA-cam search eng mode for BH Genesis sedan and that should pop up. It's the same setting you go into to get the Prada logo to appear upon start up.
My DIS knob works when I press it but it doesn’t work when I try to scroll. How did you take the knob off? I’m not trying to accidentally break it and not have it work at all
If you plan on replacing it then I would actually take off the whole assembly. The knob does pull off but you can easily break the plastic grooves that make it sit perfectly with the bottom portion.
@@hmr1979 Thanks for the video. I have 2012 Genesis 5.0 (one owner, 91K miles). Recently pushing the "DIS knob" would not clear the disclaimer screen when pressed. Obviously whatever it is connected to is now defective. As a temporary fix I pull the "DIS knob" and and if I turn the post and wiggle it the disclaimer screen clears. I'm working up the courage to attempt the fix you show. Thanks
Search for a vid on UA-cam on how to remove shifter knob for an Equus...apparently there is a way to do it without using much force...like some sort of pin lock inside it. I just used force lol
Sorry, just seeing this now...I believe there is a clip that is inside that you can depress....I just yanked it out, which works, but apparently there is another way to do it.
Lawrence - Man I threw away the console. Would have gladly sent it to you. But honestly I think the wheel portion on it (the small mechanism the has the stud that holds the wheel) was broken also if I remember correctly. If for some reason I am mistaken and did NOT trash the piece, I will send to you. Ill follow up once I get back home.
@@lawrencecoore2021 Yo whats up bro. I actually did not throw it away. I still got the old DIS assembly. You still need it? If so just let me know and I can send it via mail.
Thanks for the video. To get the shifter knob off I used a 3/8" open wrench and levered it up on a piece of 1" thk wood while twisting the knob. No scratches anywhere
There’s a video by “generation garage” on how to remove the whole console.
Nice. Thanks for posting this, my Rspec is starting to fritz out here and there, and I had a feeling it was this. Cheers.
Yes sir. You're welcome
Very helpful! I bought my daughter a 2010, and it looks like the entire 7-button and DIS knob control center is not functioning (after replacing a 25amp fuse under the driver's side of the engine compartment to fix an issue with the acc ports). The knob and all the buttons were working fine before the fuse replacement, but looks like I may need to replace the unit. Do you mind sharing the link of the Ebay seller? Was there a single fuse or breaker that protected this assembly? Thanks in advance for any help you can give.
Hello there Steve. The item I purchased is "Center Control Panel OEM 96540-3M300_K Hyundai Genesis 2008-2013" if you type in that on ebay should come up with the seller ucon-tec. Looks like they're from Korea and my item came in pretty quick...I want to say within less than a week! I looked up the pre-GDi set ups and the consoles looks to be the same as mine so your 2010 so it should work. I just am not positive if this will resolve your issue but it sounds to me like it should. Mine was a non response knob. Left and right worked .but scroll didn't not. Also the enter (push down) was very finicky. The scroll was completely shot which meant all I could get to were the very top and very bottoms of each menu. Obviously this made navigation useless because I couldn't put in addresses. Worth a shot...looks like the company still has some. And I'm not really sure about the fuse..I didn't touch the fusenbox at all. Fuse issue would (if fuse indeed) cut out all power to the module...which would mean it wouldn't be lit ...wouldn't work all together.
@@hmr1979 Thanks for all the info. The unit still does light up, so it must be getting power. I'll let you know how it plays out.
@@stevesullivan3310 sounds good. I reread your post ...yeah if it's still getting power than I don't think the fuse replacement was the issue that broke it ..however it's odd that it happened right after you swapped out the fuse. None of the functions on the DIS assembly does not work ?
@@hmr1979 None of the functions work. Not the knob, or any of the 7 buttons. Odd, indeed.
@@stevesullivan3310 there is only one wiring harness that leads to the DIS assembly and there are two other wires which I believe were for the heated/cooling for seats. Didn't find a fuse that was anywhere inside there but I could be wrong 😸
@hmr1979 thank you for this video! been struggling with the DIS knob in my 2012 and was wondering if it was a fuse or the knob itself. will do both as my USB/AUX ports are behaving strangely as well
@dwayne965 you're welcome..am battling currently the front power outlets not working. Someone told me it's in fuse box in engine compartment. A 20a fuse. Mine is in good though. So am not sure what it could be
Can any car repair shop do it?? What went wrong mine isn’t working (knob )
What is the unit doing?
I havre an issue with the radio going to usb ok its own. No matter if on radio or cd. Its annoying. What could be causing this and is there a fix? Also, is there a way to reboot the stereo system?
You can reboot the unit by going to ENG mode and go into the audio settings portion and reboot that way. UA-cam search eng mode for BH Genesis sedan and that should pop up. It's the same setting you go into to get the Prada logo to appear upon start up.
My DIS knob works when I press it but it doesn’t work when I try to scroll. How did you take the knob off? I’m not trying to accidentally break it and not have it work at all
If you plan on replacing it then I would actually take off the whole assembly. The knob does pull off but you can easily break the plastic grooves that make it sit perfectly with the bottom portion.
@hmr1979 did you still have the old knob?
@@hmr1979 Thanks for the video. I have 2012 Genesis 5.0 (one owner, 91K miles). Recently pushing the "DIS knob" would not clear the disclaimer screen when pressed. Obviously whatever it is connected to is now defective. As a temporary fix I pull the "DIS knob" and and if I turn the post and wiggle it the disclaimer screen clears. I'm working up the courage to attempt the fix you show. Thanks
Search for a vid on UA-cam on how to remove shifter knob for an Equus...apparently there is a way to do it without using much force...like some sort of pin lock inside it. I just used force lol
@@BrentGorman-c7pgood to hear. Hope it goes well for you.
How did you takeoff your knob the one that turns left and right?
Sorry, just seeing this now...I believe there is a clip that is inside that you can depress....I just yanked it out, which works, but apparently there is another way to do it.
Do you still have the old council you had taken out... The wheel on mine have broken how much would you sell it for???
Lawrence - Man I threw away the console. Would have gladly sent it to you. But honestly I think the wheel portion on it (the small mechanism the has the stud that holds the wheel) was broken also if I remember correctly. If for some reason I am mistaken and did NOT trash the piece, I will send to you. Ill follow up once I get back home.
@@hmr1979 thanks man plz do i would really appreciate that.
@@lawrencecoore2021 Yo whats up bro. I actually did not throw it away. I still got the old DIS assembly. You still need it? If so just let me know and I can send it via mail.
@@hmr1979 thanks man for replying but u got i taken care of. Appreciate that you followed up
@@lawrencecoore2021 sounds good man!
does this require an unlock code? or does it work right out the box
Mantooth; no. Plug and play
@@hmr1979 Thanks
Do you still have the Sonata
Benny: yes sir. I do. That's my baby