I'm a senior researcher at Heimkeeper Co., Ltd.Our company has an idea to reduce propeller noise and vibration of helicopters and drones.We're done with the experiment.We have applied for a utility model and a patent As a result of several experiments with small propellers, the current noise and vibration reduction effect is about 30%.Looking forward good news from you soon
I can't wait for this to fly. I feel like I built it. You really get a appreciation for how much time and effort it takes to build something when you see every step. One has to see it as a incredible machine that is not easy to make. You have an amazing skill set. I check all the time for new videos and get excited with everyone.
No rubber mounting of the motor ? Any time you slide a heavy weight across a aluminum tube first put a cloth or a split soft deburred tubbing on the tub to protect the tube from being scratched . If that plywood has a small piece of stone stuck in it the scratch it could make while sliding on the aluminum will cause a crack in a structure member over time. That is why major airline companies inspect the structure of there planes for any scrapes oe scratches and have them buffed out immediately. Great build I like your project ....
Thanks Ray for your constructive comment. Yes i have to do something to protect the frame of the helicopter from the vibration of the motor. The final position of the motor is not figured out jet because i dont have the hole transmission ready so far.
I just stumbled across this video. It looks like excellent work! May I ask how you are keeping the LBS down to keep it ultralight class? The build the mosquito near me and they are just a couple of tubes and just make it. Your frame looks stout. I am going to keep watching. Love. To see it fly!
Job well done. I like the looks of that little ROTAX & I like the extra support tubes added in as well. As to the position of your engine, is this the "center point" of the whole bird when complete??? What is the weight & horspower of the little ROTAX engine? How did you know what to choose for the best performance & horspower for your helo??? Thankya for sharing the video!
Thanks Rodney. I try to keep the center of gravity close to the main rotor mast. The engine has 65Hp. Dry weight (Without: gearbox and exhaust) is 29.1Kg or 64.0Lb. This engine suits me because of good power to weight ratio and simplicity. Have a good week...
@@ultralighthelicopter You're very welcome sir, & thankya for replying back & answering me. This is good to know as i love to grow my knowlege in the helicopter industry. What videos i have got to watch i really have enjoyed & im very proud of what you yourself have accomplished thus far & for sharing with all of us here. Exc8ted to see whats next. . . .take care.
Great work &video. You may not be aware of it there is two advertisings every two minutes ! This is crazy. I'll probably follow your project and suscribe but won't watch the videos with so many ads !
Great job! I just wonder if the position of the engine is right? Is this position right according to the installation manuel of Rotax? Does it creat any problem for a long term? Because spark plugs will work horizontally at this position.
Excelente proyecto en donde se puede conseguir un motor para esos tipos de proyectos, siempre he querido fabricar uno en donde puedo conseguir un motor..ATT: Fernando quintero, saludos desde Colombia..👍
Hello sir, this is a nice series of videos. Will you be piloting the craft, once complete? I don't understand, are you yourself from Switzerland, or is the Rotax engine from Switzerland? Hope to see more; great taste in music, too!
Is that engine designed to run upright like that? That looks just like snowmobile engines! How much was it, what's the HP and is it two two cylinders with two spark plugs per cylinder?
You need to modify the cooling system PLEASE. That top cylinder will develop a vapour lock and you will cook it and seize up. It is designed to be horizontal!
I'm a senior researcher at Heimkeeper Co., Ltd.Our company has an idea to reduce propeller noise and vibration of helicopters and drones.We're done with the experiment.We have applied for a utility model and a patent As a result of several experiments with small propellers, the current noise and vibration reduction effect is about 30%.Looking forward good news from you soon
Amazing project and the best engine for this
Abi motor modeli ne ? Aynısını bende yapmak istiyorum
Love to see a real craftsmen. Extremely great work. can't wait for each new posting.
Another Iron Maiden fan, awesome. 🤘🏻
Love the Iron Maiden ending...
Your a mad scientist! If we were neighbor's we would be friend's! Awesome build man!
bonito o projeto não sabia que motor de helicoptero trabalhava na vertical muito bom abraço
The sad part of the video is that is ends up. Greak work 👏👏👏
Давай парень жги, небо ждёт тебя. Удачи.
I can't wait to it's finish, I love to see it flying 😍
Ha Ha Ha me too❤
Hello. To install a 2T motor on a frame, you need to use elastomeric engine mounts.
I was watching your journey fro the start , all the best , much love from Sri Lanka 🇱🇰
Thanks Shiham Hussain i really appreciate your support, much love back to you from Switzerland.
@@ultralighthelicopter ❤️
i'm from brazil and i'm making one too. I'm looking forward to seeing you flying.
Hey brother, how do I get that engine to make one?
You are my hero, good job 👍
Cool......582 is good engine. I had 2 of those in aircraft and lots of trouble free hrs!
Hola, me encanta tu proyecto, estaré atento a tus progresos, ánimo
se ve lindo y si lo recubres con un poco de fibra de vidrio y pintado uf de lujo :)
Keep up the good work! Wishes from Sri Lanka
Very cool project, nice work
Super Arbeit!!!
I see that the newborn is approaching its first step. Are we all going to celebrate?
I can't wait for this to fly. I feel like I built it.
You really get a appreciation for how much time and effort it takes to build something when you see every step. One has to see it as a incredible machine that is not easy to make. You have an amazing skill set. I check all the time for new videos and get excited with everyone.
Mei teresa planos me puedes colaborar
@@jhonescudero3114 dónde te los envío?!!
@@Stanmart yes
This is for sell?
Great work! That engine will sound very nice!
Awesome job guy ! I'm jealous as hell ! Good luck an God bless .
هر لحظه که میگذره داره قشنگ تر و کامل تر میشه. امیدوارم روزی پرواز کردنش را ببینیم. موفق و پیروز باشید.
This channel is really underrated! ... Your build is a real joy every time ...keep it up)
CAN'T wait To see Play 😌
Good job mate ,I like it
Can't wait the last results
eager to see part 18👍
we are waiting to see it flying bro all the love from morocco
Thanks Nouredine and love back to you from switzerland...
Особенно впечатлил строительный уровень , в авиостроении
Can't wait for the results
ASSALAM ALAYKUM 👍👍👍🇺🇿🇺🇿🇺🇿
давай чувак. продолжай. всё нормально получается))))
No rubber mounting of the motor ? Any time you slide a heavy weight across a aluminum tube first put a cloth or a split soft deburred tubbing on the tub to protect the tube from being scratched . If that plywood has a small piece of stone stuck in it the scratch it could make while sliding on the aluminum will cause a crack in a structure member over time. That is why major airline companies inspect the structure of there planes for any scrapes oe scratches and have them buffed out immediately. Great build I like your project ....
Thanks Ray for your constructive comment. Yes i have to do something to protect the frame of the helicopter from the vibration of the motor. The final position of the motor is not figured out jet because i dont have the hole transmission ready so far.
@@ultralighthelicopter thanks
I just started laughing when the epic hair rock came on. These videos are so much fun.
Is nice. I am always see you do.sucses for you.
Thanks Sir, i really appreciate it.
Fantastico. Muitos parabens. Venha daí o episodio 18!
🥰🥰great 👍
i watched all your videos
I do love the music and I look forward to these episodes! Keep up the great work! :)
Following here I want to see its flying goodluck
Will you add rubber to your engine mounts? It certainly wouldn’t hurt. Vibration will be a pretty big issue. Sweet rig though wow
Fantastic , subbed.
I would check for cracks with dye penatrent Nice bird!
Sir kindly let me know which material is used to design airframe structure?
Hy Ismat Noori the frame structure material is aircraft grade aluminum.
Оригинальное решение конструкции подмоторной рамы.Ok!
под мотора далжно бит саленблоки
Почему то у меня есть опасения что конструкция не выдержит вибрацию и может разрушиться😁
Интересует марка алюминия? Двигатель поларис 500?
I just stumbled across this video. It looks like excellent work! May I ask how you are keeping the LBS down to keep it ultralight class? The build the mosquito near me and they are just a couple of tubes and just make it. Your frame looks stout. I am going to keep watching. Love. To see it fly!
Ну что ж, я жду первый полёт 😇😌
for sure it will be great
Just found your channel i’m really interested keep up the good work you got yourself a new sub
Job well done. I like the looks of that little ROTAX & I like the extra support tubes added in as well. As to the position of your engine, is this the "center point" of the whole bird when complete??? What is the weight & horspower of the little ROTAX engine? How did you know what to choose for the best performance & horspower for your helo??? Thankya for sharing the video!
Thanks Rodney. I try to keep the center of gravity close to the main rotor mast. The engine has 65Hp. Dry weight (Without: gearbox and exhaust) is 29.1Kg or 64.0Lb. This engine suits me because of good power to weight ratio and simplicity. Have a good week...
@@ultralighthelicopter You're very welcome sir, & thankya for replying back & answering me. This is good to know as i love to grow my knowlege in the helicopter industry. What videos i have got to watch i really have enjoyed & im very proud of what you yourself have accomplished thus far & for sharing with all of us here. Exc8ted to see whats next. . . .take care.
🤘🏻👍🏻for the sound
Waiting the next
Great work &video. You may not be aware of it there is two advertisings every two minutes ! This is crazy.
I'll probably follow your project and suscribe but won't watch the videos with so many ads !
er we i put this in a separate video in the future coming up...
@@ultralighthelicopter you're definitely smart ! Your Heli will fly.
Nice 🇮🇳
How does all the screws hold up against vibrations?
Super video
Mesin apa,ni bng?
Hope u can fit rubber bushing from engine mounts as these engines are famous with good vibration
Nao vejo a hora desse proto voar
Super sir great work
👍? Good job !!! are you going to mount any silent bloc between the motor end the frame?
Hy Joseph yes i will put any silent bloc between the engine and the frame bevore first spin up.
Long live the irons
Great job! I just wonder if the position of the engine is right? Is this position right according to the installation manuel of Rotax? Does it creat any problem for a long term? Because spark plugs will work horizontally at this position.
Spark plugs will work horizontally?
No silentbocks or some kind of cushion system on the engine, fatigue cracks.
studio.ua-cam.com/users/videoqO4k4QY4ZCc/edit
Вначале движок по сходням затаскивал, весь кряхтел, а вытащил в одну харю, даже не пукнул!
good work, it seems the type of metal used all are aluminum? and y plz?
@ Phelix, thanks. The main frame of the helicopter is done with aluminum to keep it light. For the Landing gear skids i used stainless steel.
I AM FROM INDONESIA.
Is this engine specially built for vertical mounting?
Himpresionante tecnica
Excelente proyecto en donde se puede conseguir un motor para esos tipos de proyectos, siempre he querido fabricar uno en donde puedo conseguir un motor..ATT: Fernando quintero, saludos desde Colombia..👍
friends what is the name of this resource? (Thanks for help)
وضح سؤالك 'what is your qestion?
Can I provide the technical knowledge and data to make one like this at home?
Perfect...
Hello sir, this is a nice series of videos. Will you be piloting the craft, once complete? I don't understand, are you yourself from Switzerland, or is the Rotax engine from Switzerland? Hope to see more; great taste in music, too!
I think rotax is made in Austria
ใช้เครื่องยนต์กีซีๆครับ
Once you get the rotor head spinning What are you going to do in terms of testing for vibration and dynamically balance it.
Hy Clayton. I dont know jet exactly but hopefully in the future i can give you a small answer
Is that engine designed to run upright like that? That looks just like snowmobile engines! How much was it, what's the HP and is it two two cylinders with two spark plugs per cylinder?
Yes, it is a "helicopter version" of the 582 UL Engine with 65 HP, two cylinders and two spark plugs per cylinder
Do they usually use Aluminum instead of cromolly on these helicopters?
Looking good bro 😁👍 , just a quick question is the engine designed to run in vertical position ? and what is the size of engine ?
Keep em coming 🤘🤘🤘🤘
Guess he waiting to finish & show you when he does some barrel rolls in it!😜...
Hello friend, your work is magnificent. You could leave the plans of That design, please, he already bought one so he can build it.It is magnificent.
how about Central Gravity?
Just found your channel! Looking forward to follow along! How many hp is the motor?
Hy stonebay the engine has 65hp.
Hi sir .... This shashidhara from india ... Sir I need dimensions of air frames and which meterial are used
تقدم جميل
اشكرك اني وجدت عربيا مهتما بهذا الفيديو....تحياتي
@@ibrahimalhamidi6239 نعم أنا مهتم جداً وأتمنى أشوف بقية العمل
@@ibrahimalhamidi6239 ua-cam.com/channels/qXrAG3xo0CdSVivnvAdwiw.html
هذه قناتي طيران شراعي اتمنى تعجبك
Can using how long km?
You need to modify the cooling system PLEASE. That top cylinder will develop a vapour lock and you will cook it and seize up. It is designed to be horizontal!
Where can i but this motor
This is for sell?
Can use motorcycle engine
Dude, you need engine mount to isolate vibration. You will vibrate the frame apart. Read about resonance frequency. Making me worried!
when the engine starts ?
Waiting to see tail rotors installation.
Engine weight ?
What is the price of this engine
really you have an engine direct mountin in a helli withougth any lord mount for vibration supressor ufff
Como es el Nombre correcto del motor gracias y si hay un contacto donde conseguirlo
How HP this engine?
The Engine has 65 HP
Hey brother, how do I get that engine to make one?