I hope you liked the result✨ of the restoration.🙂 Rate my work and efforts in the comments from 1 to 10!😉👍 I am waiting for your Comments, Likes and Subscriptions.
Работа с утюгом понравилась, получилось отлично, жаль в конце не показали его функционал. В продолжение темы звуков костра надо было нагреть внутреннюю деталь, положить в утюг и что-нибудь погладить, тогда бы моему восторгу не было бы предела. 😊
I love that you re-textured every part by sanding it down. Most restoration people just take the rust off then go straight for the re-paint. You ACTUALLY restored it. Nice work. Love to see it.
@@danbusojarnis8262brass forms a patina if left exposed to the wrong chemicals or environment. It is a green rust like appearance on the surface and it is extremely hard to polish out. I have had quite a few brass items in my lifetime and polishing is not my favorite hobby. I also use a safe liquid designed for ammunition reloaders to clean brass cartridges. Pour some of the liquid into a glass bowl and let the brass soak in it for about an hour, keeping watch in case it should start attacking the copper in cheap brass items especially those from India and the orient where the mixture in the metal has impurities. Rinse completely and then proceed with polishing. Iron rust on brass? Don’t know how that would come to be unless soaked in salt water with iron filings for a while, removed to air dry and then repeat the process. Might cause surface rust but I’ve never tried it.
I appreciate all of the great camera angles that you used so we could really see all the intricate work that you did on this amazing piece. Stunning repair work - so intricate and well-thought out. 👍👍👍👍
Just the time alone to set up each shot in detail makes it a fine video. Reminds me of a video class from fifty plus years ago. Having to work with plastiline figures. Pose them, shoot a few frames of film, repose film, repeat until you get your final results. A form of animation from the fifties and sixties. Camera angles were critical so viewers could have a perfect finished product.
Продвинутая модель утюга для своего времени 👌 Внутрь кладутся не угли, а нагретая железяка, и все детальки такие аккуратные, на резьбе. Достойная вещь, получившая новую жизнь 👍
у нас в сельской местности на металлоприемку чего только не несут...заехал к одному сдать обрезки проводов после монтажа, а там у него целая коллекция антиквариата
I remember my grandmother had one of these. She didn’t use it anymore, but it was still in beautiful condition. You did a wonderful job with this iron!! Another 10 from Texas!
Beautiful. So glad you didn't sand it all the way down and some of the pitting was still visible. I'd rather have that than losing too much of the original. It looks so good. Fantastic
It really depends on the type of metal, whether there's pitting. Also, there are indeed barns full of old, rusty stuff. It's items kept in good condition that are difficult to find...
@@silvermoon57 I meant how to calculate the correct temperature of the indoor unit so that this iron does not burn through the fabric and does not stick to it.
@@Mikhail_1979 Здравствуйте, берут ткань хлопковую мокрую ( нужно каждый раз смачивать не должна быть сухой) она выступает в роли прокладки между утюгом и тем изделием которое Вы собираетесь гладить.
Thank You! It is so beautiful how you truly restore these art works. For you are true artist. They do not make any thing the way they used to, they were build to last once upon a time. One LOVE
Hi Mr Restorer when i lookedcat the iron I thought this one is only fit for ghe bin then I remember it was your good self restoring it. I thoroughly enjoyed this restoration it was really interesting and you are very talented and clever with any sort of material you need to us to make new parts or repair parts . Thank you for a fantastic video this one is 10/10. Amanda xx
Specaly on Brass, i like the before and after effect. very decorativ. 👍👍👍👍👍But i dont think, it is old. It seams to be a replica from the seventies. Old screws, over hundred years had not six sides, only four. The is also no sign the handle was used very offen. It looked new, but aged. In the seventies, brass objects for decoration bekame popular and there was a lot importet from India. Just like the bag in the last video.
Such beautiful work. I love the fact that everything is so vintage or almost ancient. It still works after you restore it.😊❤️ Your channel is incredible. watch your amazing videos when I can. Keep up the awesome work.
It’s fake. He added the patina. Anything that crusty should’ve had pitted metal and cracked wood. The little door still slid open nice and easy, should’ve been completely corroded shut. This is a new trend among UA-camrs, where they purposefully make something look so far gone and then restore it.
This guy DOES NOT RESTORE ANYTHING... HE TAKES A CLEAN ITEM AND COOKS SUGAR AND DIRT ONTO IT, HE DOESNT EVEN HAVE TO CLEAN IT BECAUSE HE JUST SHIWS WHAT IT LOOKED LIKE. EFOR HE COVERED IT IN FAKE RUST.. ALL HIS ITEMS ARE faked.
All of these old conveniences are always something to hold. So many of them heavy with the steel they were made from. They felt better even if todays conveniences are lighter and more efficient. Define a 10.
He is a liar. He takes clean items and makes them look dirty with fake rust...brass cannot rust... all real craftsmen call him out, he could even be ruining these items and editing the film so the before becomes the after.
Hahah! And no corrosion marks, also the rust on the metal insert is shiny! Many of there’s restores guys have skill but worry about this fake corrosion none sense. Diminishing my appreciation for there skill.
brass doesn't rust. rust is iron oxide, so only metals with iron rust. other metals corrode, but not in the same way as rust on iron containing metals, because rust can completely eat through and the corrosion you see on other metals is normally just on the surface.
Que hermosa restauración! Siempre veo tus trabajos, son muy satisfactorios, gracias por compartirlos con nosotros. Saludos cordiales desde Santiago de Chile mi amigo
I hope you liked the result✨ of the restoration.🙂
Rate my work and efforts in the comments from 1 to 10!😉👍
I am waiting for your Comments, Likes and Subscriptions.
🥰🥰🥰👍
10!!!
Definitely a 10, was hoping to see a demo of how you use it, got a load of shirts need ironing, can I drop over with them 😅😂😊
Работа с утюгом понравилась, получилось отлично, жаль в конце не показали его функционал. В продолжение темы звуков костра надо было нагреть внутреннюю деталь, положить в утюг и что-нибудь погладить, тогда бы моему восторгу не было бы предела. 😊
After you restore them do you sell them?
I can just imagine how happy and proud the first person was to own this iron. 😊
In ancient times, it was equated to a IPHONE15 )))
I'm sure they were overjoyed to have another tool to allow them to do more housework.
I love that you re-textured every part by sanding it down. Most restoration people just take the rust off then go straight for the re-paint. You ACTUALLY restored it. Nice work. Love to see it.
Its easy to restore when you start with a clean item and then bake fake rust onto Brass...brass does not rust..this guy is a liar.
@@danbusojarnis8262brass forms a patina if left exposed to the wrong chemicals or environment. It is a green rust like appearance on the surface and it is extremely hard to polish out. I have had quite a few brass items in my lifetime and polishing is not my favorite hobby. I also use a safe liquid designed for ammunition reloaders to clean brass cartridges. Pour some of the liquid into a glass bowl and let the brass soak in it for about an hour, keeping watch in case it should start attacking the copper in cheap brass items especially those from India and the orient where the mixture in the metal has impurities. Rinse completely and then proceed with polishing. Iron rust on brass? Don’t know how that would come to be unless soaked in salt water with iron filings for a while, removed to air dry and then repeat the process. Might cause surface rust but I’ve never tried it.
no he did not restore an antique. he destroys one
@@Subgunman green is in brass with lot of copper inside. if copper is litle, brass dont get green
Bunch of haters
I appreciate all of the great camera angles that you used so we could really see all the intricate work that you did on this amazing piece. Stunning repair work - so intricate and well-thought out.
👍👍👍👍
Thank you, glad you liked my work!👍😉
Just the time alone to set up each shot in detail makes it a fine video. Reminds me of a video class from fifty plus years ago. Having to work with plastiline figures. Pose them, shoot a few frames of film, repose film, repeat until you get your final results. A form of animation from the fifties and sixties. Camera angles were critical so viewers could have a perfect finished product.
@@TheRestorerYoure videos are the best ❤️👊🌟
This is one of the fanciest old irons I’ve seen. Great job in making it look so good.
Продвинутая модель утюга для своего времени 👌 Внутрь кладутся не угли, а нагретая железяка, и все детальки такие аккуратные, на резьбе. Достойная вещь, получившая новую жизнь 👍
Да. Я тоже так подумала.
Продвинутая система. Очень крутой утюг. И крутой мастер,вернувший ему жизнь🤩
I confess that I found the prismatic rust coloring to be quite beautiful
I don’t know why this so relaxing
Thanks!😉👍
I agree. I think it's the pacing; it's excellent!
I restored a brass iron identicle to this one in 1973! It's one of my favorite antiques. Nice restorationl
Обожаю такие видео. Залипательные неимоверно.
Молодец,мужчина. Как говорится сделано с душой!
🤩👍💯🔥😍
Thank you!😉👍
Прекрасная работа. У мастера золотые руки. Видео смотришь как релакс. Антикварной вещи подарил вторую жизнь.
Thank you!👍
Какие красивые , изящные и простые в употреблении вещи умели изготавливать наши пра-пра-пра-прадеды. Они мастерили на сотни лет.
👍😉
Золотые руки! Загляденье!
Thanks!👍
It’s beautiful. Love the design of the iron, so simple yet so elegantly effective
Thanks!👍 Where are you watching from?🌍😉
Этот утюг сегодня выглядит так круто, как не выглядел наверное в день своей продажи более ста лет назад! 👍
Это настоящее волшебство! Мастер !✨🎆✨
Thank you!👍😉💚
Жаль из хохлолэнда
Респект за такую реставрацию утюга, работа кропотливая, как здорово что есть такие мастера. Здорово👏✊👍 Удачи вам, мастер!!
Thanks!😉👍
Удивительно, где Вы такие шедевры добываете... Наблюдение за процессом восстановления просто завораживает!
у нас в сельской местности на металлоприемку чего только не несут...заехал к одному сдать обрезки проводов после монтажа, а там у него целая коллекция антиквариата
Это правда
I remember my grandmother had one of these. She didn’t use it anymore, but it was still in beautiful condition. You did a wonderful job with this iron!! Another 10 from Texas!
Beautiful. So glad you didn't sand it all the way down and some of the pitting was still visible. I'd rather have that than losing too much of the original. It looks so good. Fantastic
Thank you very much!)👍😉
Glad you liked it!
You are amazing. Very impressive skill.
Thanks!👍 Where are you watching from?🌍😉
@@TheRestorerI am from Vancouver, Canada 🇨🇦
Завараживающее зрелище! Увидела обложку, где до и после, захотелось посмотреть как это было сделано. Спасибо, очень качественно снято.
Thank you!👍😉
Muito mais que um ferro de passar roupas, uma linda peça de decoração 😍
Thanks 👍😉
Amazing to see something so wrecked become beautiful again ❤
Thanks!👍 Where are you watching from?🌍😉
All that "rust" and no pitting. Amazing
Yes and it’s funny how often all these badly rusted items suddenly appear from nowhere!! There must be a barn full of them somewhere! 😜
It really depends on the type of metal, whether there's pitting. Also, there are indeed barns full of old, rusty stuff. It's items kept in good condition that are difficult to find...
You should have shown how to use the iron after restoration. Does it work properly?
Yes it does, all he needs is to heat the bloc of iron on some ember than put it inside the fer and done
It's just an iron!
It’s an iron how would it not work properly lmfao
@@silvermoon57 I meant how to calculate the correct temperature of the indoor unit so that this iron does not burn through the fabric and does not stick to it.
@@Mikhail_1979 Здравствуйте, берут ткань хлопковую мокрую ( нужно каждый раз смачивать не должна быть сухой) она выступает в роли прокладки между утюгом и тем изделием которое Вы собираетесь гладить.
Thank You! It is so beautiful how you truly restore these art works. For you are true artist. They do not make any thing the way they used to, they were build to last once upon a time. One LOVE
This guy is a liar. He fakes the dirt and rust and . I can't stand people who make this fake crap.. brass cannot rust.
Очень рада большому количеству просмотров. Значит не все потеряно. Общество в любые времена ценит ручную работу. 🏆🏆🏆
Thank you!👍😉
My granny had a few of these. She used them as door stops. She taught me how they were used.
Золотой утюг! Он явно никогда не был столь красив)
Вы волшебник! Восхитительное преображение!!!
Поздравляю с приобретением пескоструя )
🛠👍😉
BEAUTIFUL !!
Thank you!👍😉💚
Hi Mr Restorer when i lookedcat the iron I thought this one is only fit for ghe bin then I remember it was your good self restoring it. I thoroughly enjoyed this restoration it was really interesting and you are very talented and clever with any sort of material you need to us to make new parts or repair parts . Thank you for a fantastic video this one is 10/10. Amanda xx
Thank you, glad you liked my work!👍😉
He is a fraud. Brass cannot rust..
設備がグレードアップしてる！！
思わずニヤニヤしてしまう程に美しい👏
そうそう) アップグレードが行われました
Ummm… I have no words for that! Your channel should be called, ‘The Miracle Worker’. Wow… that is gorgeous! You’re simply amazing. Another realm.
Хорошая работа! На скорости 1.5 смотрится норм.
Успехов!!!
😉👍
Отличная работа 😊
Thank you!👍😉
Eu Deus que maravilha de Arte! !👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍☝👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thanks!😉👍
Похоже, вы сделали его ещё лучше, чем он был изначально! Браво!
Thanks👍😉
Specaly on Brass, i like the before and after effect. very decorativ. 👍👍👍👍👍But i dont think, it is old. It seams to be a replica from the seventies. Old screws, over hundred years had not six sides, only four. The is also no sign the handle was used very offen. It looked new, but aged. In the seventies, brass objects for decoration bekame popular and there was a lot importet from India. Just like the bag in the last video.
Thank you!👍😉
Beyond a 10! Absolutely stunning!!!
Thank you very much!)👍😉
Such beautiful work. I love the fact that everything is so vintage or almost ancient. It still works after you restore it.😊❤️ Your channel is incredible. watch your amazing videos when I can. Keep up the awesome work.
Thank you very much!)👍😉
@@TheRestorer No problem 😊 I'm happy to watch your masterpieces come to life.
It’s fake. He added the patina. Anything that crusty should’ve had pitted metal and cracked wood. The little door still slid open nice and easy, should’ve been completely corroded shut. This is a new trend among UA-camrs, where they purposefully make something look so far gone and then restore it.
Beautiful !!!
Thank you very much!)👍😉
Wow, what a beauty!
Thanks!👍😉💚
That turned out incredible!!! Well done! 👍
Thanks!👍😉
He is a liar. His videos are all fake. Brass cannot rust.. look at all his videos, real craftsman call him out. He is full of shyte
The fire crackle at end was divine!!!!!!
😮 Just amazing. So beautiful.
Thank you very much!)👍😉
Nice restoral.
Thank you!👍😉
You are off the scale!❤ I love watching you restore things! The iron looks amazing❤
Thank you very much!)👍😉
This guy DOES NOT RESTORE ANYTHING... HE TAKES A CLEAN ITEM AND COOKS SUGAR AND DIRT ONTO IT, HE DOESNT EVEN HAVE TO CLEAN IT BECAUSE HE JUST SHIWS WHAT IT LOOKED LIKE. EFOR HE COVERED IT IN FAKE RUST.. ALL HIS ITEMS ARE faked.
Amazing work! Beautiful restoration!!
Утюг так не блестел даже, когда был абсолютно новым.
yes
This is an amazing restoration. The iron is so beautiful and the cherry stain tops it off wonderfully. Thankyou for sharing.
Thank you, glad you liked my work!👍😉
He is a fraud. Brass cannot rust. He actually ruins these items and edits the sequence..
Beautiful Restoration
Thank you!👍😉
Magnífico, bello trabajo caballero
Thanks👍😉
Es maravilloso el trabajo que haces 😊
Thank you!👍😉
It is fantastic to watch you work and see how the materials come back to beautiful life!! Incredible job. 10/10 😃
Hello! Thank you!👍😉
Where are you watching from?🌍😉
Manitoba, Canada :)@@TheRestorer
I might as well subscribe and binge all the previous content.
Subscribe! I will be glad to see you as my subscriber! Where are you watching from?🌍😉
Absolutely stunning! 👏👏👏
👍😉💚
Dati necemu sansu za novi zivot!!👍
👍😉
That restoration of the iron exceeded my idea of how the finished look. Amazing. Keep it up.
Thank you!👍😉
Вы молодец! Какая замечательная работа!!!😊👍👏
У меня брат тоже реставрирует старые вещи, так нравится видеть результат такой работы!😊🤗❤
Excuse me? This is a machine through magic! Thanks for sharing.
Thanks!👍 Where are you watching from?🌍😉
@@TheRestorer U.K 👑
Non ci sono parole per commentare il grande lavoro di restauro compiuto. Bellissimo!
He is a liar. He fakes everything.
I say only WOW 😮❤
So, so, so satisfying and cool to watch.
Thank you!👍😉
Наконец-то я увидела пескоструйку))
👍😉
Beautiful work! Thanks for sharing!
Thanks!💚👍😉
All of these old conveniences are always something to hold. So many of them heavy with the steel they were made from. They felt better even if todays conveniences are lighter and more efficient. Define a 10.
He is a liar. He takes clean items and makes them look dirty with fake rust...brass cannot rust... all real craftsmen call him out, he could even be ruining these items and editing the film so the before becomes the after.
Przepiękne jest to bardzo stare zabytkowe żelasko pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍
Thank you very much!)👍😉
Just a pure wonder! 🥰🥰
Thank you very much!😉 What country are you watching from? 🌍🙂
@@TheRestorer from France. 😊
I am enjoying the way you presented this. The sounds are almost musical!
Thanks!👍 Where are you watching from?🌍😉
Dallas Ft. Worth, Texas
Incredible workmanship, great job, Beautiful result❤
Thank you!👍😉
Теперь можно гладить носки. Отличная работа.
Beautiful effort and results.
Amazing Restoration 👍👍🏻👍🏽
Thank you!😉👍
Beautiful , amazing work 💯💯💯👍👍👍💯💯💯
Thanks 😉👍
Perfection at its finest...
Thanks
I bet that iron didn't look that good even when it was new! Wonderful job!
Thanks!👍 Where are you watching from?🌍😉
Columbus New Jersey, USA
👍. Great Work.
Thank you!😉👍💚
Wow! Great video! A pleasure to watch)))) Bravo to the master!!!👍👏👏👏
Thank you!👍😉
@@TheRestorer 👍👍👍👍Good luck to the channel!!!
Piękny kolor. Dziękuję. Pozdrawiam.😀
Hello! Thank you!👍😉
Where are you watching from?🌍😉
I didnt know brass rusts!!
Hahah! And no corrosion marks, also the rust on the metal insert is shiny! Many of there’s restores guys have skill but worry about this fake corrosion none sense. Diminishing my appreciation for there skill.
brass doesn't rust. rust is iron oxide, so only metals with iron rust. other metals corrode, but not in the same way as rust on iron containing metals, because rust can completely eat through and the corrosion you see on other metals is normally just on the surface.
Beautiful result! If I got my hands on it, I'd want to iron something.
Отдохнула душой!
Simplesmente maravilhoso, excelente trabalho. Parabéns!!
Thanks👍😉
Well done! Impressive to see come back to I think even better than the day it was bought!
Thanks!😉👍
You made a superb job of a beautiful iron. Your filming is first-class, too.
Beautiful restoration, truly a labor of love, you have the cleanest shop I have ever seen 👍 oh and the cleanest Metabo tools 🧰
Thanks!👍 Where are you watching from?🌍😉
What a beautiful restoration.👏
Amazing 😍😍😍😍
Thank you!👍😉
@@TheRestorer your welcome 👍
I am sure that when was brand new didn’t looks so good like now. Excellent job!
You are so talented 👍
Thank you!👍😉💚
Another great video, love the angles 👍
Thank you!👍😉
Restoration 10/10
Hello! Thank you!👍😉
Beautiful! Wonderful work!!!
Thank you!👍😉💚
He is a liar. His videos are all fake.
Another wonderful restoration 👍
Thanks!😉👍
He takes clean items and bakes on fake rust.. he doesn't know anything about restoration, he is a fraud.
Que hermosa restauración! Siempre veo tus trabajos, son muy satisfactorios, gracias por compartirlos con nosotros. Saludos cordiales desde Santiago de Chile mi amigo
Thank you very much!)👍😉
He is a liar. Fake. Fraud.
Wow 😮 this is so interesting to watch
Thank you very much!)👍😉
@@TheRestorer it’s so amazing to see the end result
STUNNING!!!!