how to change the oil temperature sensor on a ram ecodiesel P0198
Вставка
- Опубліковано 24 сер 2024
- SCANNER (Canada)
amzn.to/3gU4Rym
SCANNER (USA)
amzn.to/3jHOJ4y
______________________________________________________________________________________________
Hey guys its been a minute since I uploaded an ecodiesel video. What can I say the trucks been good! I did have a CEL related to the oil temperature sensor for about 6 months so I finally got around to changing it.
Stay tuned for my 6 (or 7 lol depending when I start it) 250,000KM review of the ecodiesel. The Good the Bad and the Ugly. Ill be breaking down the most common issues with the little diesel and what I like and dislike about the truck.
Helped so much! Thank you! Blessings from Kansas
Great video, helped a lot. Thank you. However, I found that going through the wheel well was considerably easier. I also found the Torque Specs. 20Nm, 177In Lbs or 14.75 Ft Lbs
Beauty thanks.
Hate to tell you this, but I got my sensor for like 19 bucks at my dealership here in Sask...but thanks for the video! Made changing mine a lot easier!
really? man thats crazy. good for ya. cheers
Keep the Eco videos coming, thanks for all the info!
For sure I have some suspension work coming up. Cheers.
Looks like it would be easier access through the wheel well
some people have been saying that I would def give it a try next time. --- 303,000KM now WOOT WOOT
Thanks for posting this i just started having this issue
yeah its a quick fix... thankfully... cheers!
Great video, what is different if not drawing the oil?
Hey ,great video helps me a lot my oil temperature drops down on 50 C and it stays there ,than goes all over up and down so for sure is the oil sensor ..
I wanted to ask you about the obd reader that you are using, I read some reviews on Amazon and some were that they are getting codes on the dash ones they plug the obd,,did you experience any of that ,I need to buy one as well to clear my check engine light .
And also wasvyour oil pressure reading acting funny when you lost lost the oil temperature sensor .
Thanks I appreciate.
my ODB reader works great. Just used it the other day to clear a CO2 error that pops up from time to time
not sure about the oil pressure...looks ok now.
Thanks again.
The one above it should be the oil pressure sensor
Can the sensor go bad with out the code popping up ?
I guess but what's the actual problem
I need to do the same thing but for the Coolant Temperature Sensor. Do you know where that is located or have you had to replace yours? Thanks!
Not yet I can check the book for ya though
i change my 5 of my glow plugs and control module and my glow plug light comes on for one sec could it be the oil temperature sensons
Never heard of those being linked. Check the ecodiesel forums
Nice job. I'm chasing an issue where my DPF soot loading % goes up, then down and up and down while going on and off the pedal (hard acceleration). Not behaving right. Forums haven't helped much and the dealer thinks I'm crazy. I'm suspicious it is my EGT sensors but can't figure out why it could cause that. No codes ... yet.
how are you finding the DPF soot level ? is this aftermarket or on the truck ? didnt realize that you could see that information. My emissions are sitting in my basement so I cant be much help brother.... tune out? lol
@@GilbertGardens I use a OBD2 Bluetooth port reader and Torque Pro with custom PIDs. I'm suspecting a bad EGT sensor at this point. Some day hope to get GDE tune.
@@phprofYT yeah its the only way to go honestly. I was chasing so many emissions issues I had to do something.
can you drive it with that sensor bad will it shut your motor down
I had it on and off for about a year. Never shut me down. Oil Temps were wackkkkk though.
how high?
hi can you help me actually i have ram 1500 diesel whenever in the morning i start my truck and turn on the heat it makes alot noise and its show p0183-00 code
Water in fuel code. www.ecodieselram.com/forum/threads/p0183-and-water-in-fuel-codes.2362/
I would replace the fuel filter and prime the system a few times. Clear the code and see what happens.
do you know somebody who knows to replace in niagara falls ??
@@sidhumoose_wala1645 the fuel filter? I'm in Niagara Falls ontario. Email me Eddy.gilbert@gmail.com
Hi Gilbert, we are looking into a Ram 1500 Ecodiesel (Gen 2-2015) and we are wondering how has the truck treated you? We are also from Ontario and are looking to purchase a used Ram1500 Ecodiesel (low Km's ~100K for a 5 yr old truck) We are coming from a Lincoln SUV with many woes and trips to the dealership with many issues under warranty. We are currently looking for a nice family (daily vehicle) that is safe rugged and can occasionally tow a car to the race track (Toronto Motorsports Park - Cayuga, ON) its about ~200KM round trip. Otherwise it's a basically family hauler and grocery getter during the week. Thanks Gilbert!
These trucks last longer when they do long hauls. You will want to delete the emissions and install a catch can to increase the engine life span. I'm posting a video this week about a couple of issues with the truck. I'm also working on a 7 year 250,000 km review of the truck. Overall I would recommend it but you should remove the EGR and install a catch can.
Do you know where the ect sensor would be?
Whi h one is that? Electronic control?
I’m having cel p0118. Do you think that could be the coolent temp sensor?
Code P0118 is the result of the ECT sensor indicating a high voltage input from the coolant temperature circuit --- worth a shot
that one is pretty easy to replace