I think you should make these things on camera and put "How to make..." In your video titles. This would boost your channel significantly. Great video as always
love your style of taking interesting physical concepts, and finding ways to demonstrate them with cheap and easy to find components. No clickbait, no 10 minute backstory, no excessive video editing, just the content and explanation.
@@ludicscience and no horrible loud music. hi. why not make the outer one slightly cone shaped so it acts as a nozzle and propels air thru it?? try it and see. use smoke.
Neat project. If you Insulate most of the rod, leaving end bare, you'll create a Variable Ionic wind device. Where the uninsulated tip is in the Tube, can make High and Low pressure wind, and clean air while blowing it through. Where and What price for the Premade HV Driver unit? Keep up your channel, learning from your efforts, Thanks for Teacher's...
Question: All the advice is that these HV devices HATE not having an active spark discharge across the output wires., and will start discharging across windings internally. How do you allow for this? Is there enough capacitive coupling between the electrodes you show, so as to keep this internal discharge from happening and destroying the HV module?
Awesome. I'm dreaming😮! This sumer I go to be the best uncle of the world. 😅 I want to repeat it in front of my family. Thanks a lot for the simplicity and practicity of yours videos. 🤓👌🏻
@@dandruff7807 ⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran
These can be used to clean air and are commercially available. The furnace in my house has one. I have to clean the plates that collect the particles a few times a year.
Not a whole lot - it really needs to be particulate matter, not against smells which are volatile gases. Against smells you can best use activated carbon filters like the ones you find in cooker hoods/extractors that don't have an exhaust to the outside. Ozone works well against smells that are 'caught' in furniture and wall paper. However, you must use a high concentration of ozone for that, and it is of great importance that nothing living is in the house at that time. Also, things made out of rubber can be damaged by ozone.
Pls pin me im a huge fan of your work and ElectroBoom's, Plasma Channel's works too I love all of your videos and the effort and energy you guys put in your videos
I think you should make these things on camera and put "How to make..." In your video titles. This would boost your channel significantly. Great video as always
love your style of taking interesting physical concepts, and finding ways to demonstrate them with cheap and easy to find components.
No clickbait, no 10 minute backstory, no excessive video editing, just the content and explanation.
Thanks
@@ludicscience and no horrible loud music. hi. why not make the outer one slightly cone shaped so it acts as a nozzle and propels air thru it?? try it and see. use smoke.
Totally agree. I love Ludic!
Thank you so much!!! You're a lifesaver. You deserve millions of views and subscribers!!
Every school needs a teacher like you
Thanks!
You are an excellent teacher. Thank you!
Neat project. If you Insulate most of the rod, leaving end bare, you'll create a Variable Ionic wind device.
Where the uninsulated tip is in the Tube, can make High and Low pressure wind, and clean air while blowing it through.
Where and What price for the Premade HV Driver unit?
Keep up your channel, learning from your efforts, Thanks for Teacher's...
Thank you. I missed your videos.
This video was much better than I expected.
Question:
All the advice is that these HV devices HATE not having an active spark discharge across the output wires., and will start discharging across windings internally.
How do you allow for this? Is there enough capacitive coupling between the electrodes you show, so as to keep this internal discharge from happening and destroying the HV module?
wow amazing,,love from Bangladesh 🇧🇩🇧🇩
Excellent job.
Awesome. I'm dreaming😮! This sumer I go to be the best uncle of the world. 😅 I want to repeat it in front of my family. Thanks a lot for the simplicity and practicity of yours videos. 🤓👌🏻
1:43 now I feel like watching street magician
Thanks for the great videos and for not being another “free energy “ channel 👌
spliting the molecules?
whar happens to the postive and negative charge after the operation ?
hi. why not make the outer one slightly cone shaped so it acts as a nozzle and propels air thru it?? try it and see. use smoke.
how many voltage may i ask?
Is it a Cottrells precipitator..,
Isn't it working like magnetron? From microwave?
Is you using capacitor or battery. And plz give circuit diagram
I finally know how to eliminate cigarette smoke...Blow into a pipe with high voltage....😆.....💥
"Cigarette" smoke, of course! But yes, it works well to catch smoke particles.
we have giant ones in a paper mill.
are these used as smoke filters?
@@PakiNewsNetwork there is some hammers on top and srews at the bottom. we collect fine ash particules.
and we have recovery boilers to, they burn a caustic liquor. those precipitators release sodium sulphate particules. sorry for my poor english
@@PakiNewsNetwork yes, boiler cheminy
could you use a metal pipe as well?
that one would be easier to clean
Yes
You can also use a small telescopic antenna & vary the length to see if it has a different affect.
@@dandruff7807 ⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
@@1islam1 🤨
What would you use it for?
These can be used to clean air and are commercially available. The furnace in my house has one. I have to clean the plates that collect the particles a few times a year.
can u use it in a liquid to get a solid forming in it?
Very interesting question. Liquid must be nonconductive and even in that case not sure if it will work
@@ludicscience what if you got good surface area?
@@ludicscience after absorbing a certain amount of smoke, the liquid might get conductive.
Would this work for odors?
Not a whole lot - it really needs to be particulate matter, not against smells which are volatile gases. Against smells you can best use activated carbon filters like the ones you find in cooker hoods/extractors that don't have an exhaust to the outside.
Ozone works well against smells that are 'caught' in furniture and wall paper. However, you must use a high concentration of ozone for that, and it is of great importance that nothing living is in the house at that time. Also, things made out of rubber can be damaged by ozone.
Pls pin me im a huge fan of your work and ElectroBoom's, Plasma Channel's works too I love all of your videos and the effort and energy you guys put in your videos
Interesting, but how much smoke can this machine remove. Id like to see how much it can handle