I wish there were more wrenches like us. On my own adventure of starting my own shop as well as of November '13 and I just crested the $65,000 mark in tools and storage myself. Not including equipment and such, just the tools in my box and two carts. Keep the faith, keep up the hard work, and keep protecting that investment! It is our livelihood every day and its not a cheap way to make a living. Side note... I have been recently "renovating" my box and carts to maximize space and versatility. You're setup has given me some very good ideas, so a much appreciative thank you! :-)
I wish I could keep my stuff that clean. I end up running tools over, sliding on the floor, always arcing on batteries, pipe wrenches/extensions, drop drills and impacts from ladders, drop my electric impacts and drills in coolant. If the sockets don't fit I grind them down, use all my tools the wrong way -sockets for seal driving - punching - wedging, use ratchets as pry bars, 1/2 inch ratchets for hammers, hit wrenches with hammers etc. Pretty much abuse the shit out of all my stuff and if I'm tired at the end of the day, I take one arm and plow them all into the top drawer and leave. You know, ....exactly like this guy.
You must be a man who actually, get's shit done. I applaud you for one, my good fellow. I too have been know to rapidly modify my tools with an angle grinder or belt sander, just to get the next bit of work done.
If you have to keep reiterating how much you use your tools, you probably don't. My tools get used everyday and they will never look brand new again, no matter how hard I clean them.
Why is everyone hating? I never heard him say once that he's a mechanic, probably just tinkers with his own cars as a hobby, the guy has clearly done well in life
Wish i had all that ...i got a fucking 10 dollar stanley tool box n a couple sockets and ratchet set n a bunch of wrenches ....and i still get the job done but if i had all that it would make my life easier on basic diy projects ...i know im no mechanic but it would be nice to have all those tools !
Patrick McClure I kind of disagree, the Mac box makes organizing the tools much easier with the deeper/bigger drawers versus my old HF box. Remember I said "kind of..." The HF box is 100% best bang for your buck. But, the Mac box is so much nicer.
MNJ John im tyring to find the box they had out a few weeks ago was liek 999 for a nice box full of tools. if you know what im talking about hit me up at garret.pigford@gmail.com
The guy's got like $40k in tools. I can't believe you are giving him shit for keeping his small fortune clean. There's nothing wrong with cleaning tools, especially when they get covered in grease and oil at the end of the day.
I disagree. I heard half of this before turning it off. This is for OCD people that may be on or do not like the side-effects of the meds. Find another doctor. As for Mac tools and your collection (I understand some people "collect" tools just because) I find fascinating. Stop the OCD thing and get some good care and start fixing shit with that awesome box.
The guy works on Lamborghinis in his garage. He does plenty of work on cars. Would you rather have a mechanic that does a shit job on your car, doesn't clean anything, throws things together, and doesn't care about what he's doing (and wind up with a car that would likely break again because it wasn't repaired correctly), or use a mechanic like John who has an extreme attention to detail, and cares about what he does? He takes pride in his work and his tools. I do the same. Everyone now a days just doesn't give a shit. Forget the OCD. What does your toolbox look like? I'm dying to know. It better look like a filthy mess with badly any tools in from the way you're talking shit.
My brother owns a Macsimizer, bright red ,it is stone cold filled. He works mostly with omc and bombardier engines. Years ago I worked on omc small outboards...I had a small box with mostly snap on tools. My brother was meticulous with repair or rebuilds he worked on.. Yes he wiped down his tools and had a certain spot for everything . But hey... if he is working on Lamborghinis that's his problem when the client wants his machine at a certain time and the mechanic is fucking around with his tools...I like the dude's Macsimezer and set up. His mental health is his own deal but he felt free to share...Best wishes to all of you hard working mechanics that make to world go 'round.
clean all my tools at the end of the week i payed a lot for my tools only a fool wouldnt want them to look good stay clean snap-on buy tools back from me almost fool price
Garret Pigford Just used an old pair of my late grandpa's pair of snap-on side cutters from the early '80's. I remember cutting hard open steel wire with them ....just found them and used them to clip open an item from Staples!!! Great tools and worth the money! Take care my friend...Bc.
Love that you have a tool box for your son I have a buddy with a daughter and she is the same way always in the garage helping her dad I think it is very cool!!
You are much appreciated for making a long version of your box! I wanted to let you know that if you are looking for a good deal to match your cart up with the box I think I have a good idea for you to save money on shipping! You said that you wanted the 4 drawer right? Well, we can just buy it in town for you and since its disassembled it saves him time! Message me if you think you might be interested
Pretty nice. I like the box. I don't have nearly that many tools and I don't even have a big box, but I do keep what I have clean. I'll often times clean them at the end of the day and reorganize as needed. I've seen boxes that look like people just threw the tools in from across the room. It takes them 10x longer to find something.
Very nice, I have a hard time keeping everything that clean but i try the best I can, stupid people hating on how clean this is, just because someone has the patience to keep tools organized doesn't mean they dont use them.
Beautiful tools and there is nothing wrong with keeping your tools clean . I wouldn't alter that expensive tool box. The stainless should be easier to clean. They sell one inch thick black rubber mats used in weight lifting rooms could be used to cover the top and prevent the top from getting dented. One thing is for sure your mac guy must love you. He should give you a bottle for Christmas.
There is a truck that comes to my shop. They got these fancy tools called snap on. My preference all the way the only mac stuff I have is body hammers and I'm gonna keep it that way. Love those boxes tho.
That's a nice come up from the harbor freight setup you had before..real crispy! Couple of things...That upper left drawer would be a great spot for your pliers with a pliers rack running along the length of the drawer. I just did mine because I had a shallow middle drawer with pliers everywhere laying around. As far as the stainless top go with rhino lining, it has a softer, glossy finish that will compliment your drawer pulls better. Line-x has more of a gritty matte finish to it. Then later on get yourself a hutch and side cabinet for all of your blow mold cases, and you'll free up tons of space for more tools. I have the triple bank tech series in lime green with the black drawer handles. When I got my stainless top the first thing I did was take it to ziebart and have them shoot it with a few coats of rhino. Looks way better in black and doesn't stick out like a sore thumb. I had to modify my hutch as well because it came with a chrome moulding strip across the front that didn't go with the color scheme either..Heat gun made quick work of that though. My next upgrade will be the side cabinet for cases and such. Looking real good man, nevermind the haters talking mess about how clean you keep your tools-Keep on slingin that chrome brother!
Nice tour F those other guys who say you don't use your tool because they are clean. I clean almost all my tools, if I'm gonna spend that type of money on my tools and box they are both gonna be clean, again nice set up from another OCD person 👍👍👍👍👍
Your son is the same way that I was with my toys “if it ain’t the way I like it your wrong and I’ll change it to how I like it” it’s nice to see he has an interest in wrenching, I’m 16 and I like to think I’ve got a pretty good tool collection I want to be a heavy duty ag mechanic and I’m amassing a collection of tool and my garage ain’t big enough lol
Yes they do, you don't have to pile stuff or dig through a lot of small boxs or wonder where something is everything has its spot and you know if something is missing. Saves time and money.
Dave G especially stuff like the prybars. the fucking prying ends dont have a mark on them. any prybars ive ever bought snap on mac matco mayhew look beat up after the first use. there is no way to stop the ends fro getting marred up if u use them. also the white makita set. come on what do u do wash your hands every time u go to puck tgem up during a job. that white is not going to look brand new if they were used everyday. i dont care who u are. everone drops or scratches drills and impacts i tight spots and there is not a mark on them fuckin things
i seriously wish you would do a torture test video comparing and measuring the force required to break the Pittsburg pro metal and composite ratchets / breaker bars to that of a comparable snap on or mac/matco. i think you one of the few pro mechanics that have owned both that is actually willing to publicly state that there are some decent quality tools to be had from HF.
AMAZING LOOKING BOX!!!AMAZING SET OF TOOLS!!!.WELL PUT TOGETHER THIS WOULD MAKE A FRONT PAGE OF A MAG.SO DONT WORRY ABOUT THE NEGATIVE PEOPLE THEIR JUST BITTER.
Great thing to do for your son, if he doesn't remember the 1st tool set you will, make for great father son moments. Thanks for the vid watch all your vids
Why you need to prove yourself from using or not your tools? You have them and that's good enough. You use a few on a regular bases and the rest is there in case you need them to make the job easier and faster from having the right tool. Nice to see you trust regular brands instead of the more expensive like Snap-On.
All of my hand tools are craftsman, husky, harbor freight or kobalt. They all have served me well. I buy tool truck specialty tools and keep them in a 52 inch husky box and a harbor freight 4 drawer cart. I make the same money as the guy next to me who has all snap-on stuff.
Nice toolbox there John looks like you could handle about anything with those tools. Wish i could afford those truck brands, but with a 200$ a month tool budget I better stick with my SK and Gearwrench tools Lol.
Boy who would guess these guys would be the uptight type. Haha. I also work in a crazy busy shop ans also buy the best & keep them crazy organized. But if you say they don't get scratched, and worry about the shine then you can't be using them in a production setting or working commision. Maybe hourly and milking the clock. But whatever, what a ridiculous argument.
So many people bitching about how clean his tools look, but that tells me that this man takes pride in his tools which he has obviously invested a lot of money on. If he is willing to take that much pride in his tools? Then you can bet he takes pride in his work! I would much rather have someone work on my car who is OCD with their tools than someone who doesn't give a shit! Plus I can relate to this. I'm just a simple DIYer and I am completely OCD about my tools!
I have just as many sockets as you and I have to know what you would suggest for socket rails or trays. I love the fact you are so organized. That is exactly how I am so having all my tools not organized right now is driving me crazy. Please help me! I'm so picky and indecisive.
I'm a backyard mechanic, meaning I work on my two mowers, mine and my wife's dirt bikes, our four wheeler, both our vehicles, small engine machines like blowers and weed eaters, plus anything my friends ask for help on. Just with that little bit of work, my tools look very used. I even tried to clean and shine them really well after watching this video. Nope, still look used. Point is, these tools don't get used. Look at the sockets and ratchets. Simply sliding a socket on the ratchet creates wear marks, rubbing some of the finish off. None of his are like that. Screwdrivers are the same way. Once used, a little bit of the finish rubs off. As a backyard "mechanic", I use HF, Craftsman, Stanley and Husky, just like a lot of his tools. I know what they look like after being used, and they don't look like his.
how you treat your tools varies from mechanic to mechanic, some guys keep their boxes and stuff ultra clean and organzied, other guys open a drawer and its just a huge junk drawer with random sockets and ratchets mixed in, black from oil grease and dirt. i try to keep my tools clean because of the money i've spent on them, hell i even wax my toolbox occasionally. however that doesn't mean i dont wrench, because i just dont like to see my shit dirty
those mac tools precision wrenches are actually a facom design but chrome I have a set of the facom version and like you said they wont let go or slip handy for saving your knuckles.
ya know, i gotta say - when i left that previous comment, this was the first video of yours that i watched.. now that ive seen a few and have some sort of concept of your history, i really kinda feel like you're a great inspiration for a lot of people.. really hope your business keeps growing, just to prove to people thats still a shot at being "self made". one of the cars in your shop had jersey plates - you wouldnt happen to be located by the woodbridge harbor freight? great vids - subscribed
Great looking setup. I own Mac and Snap-On. I think they are both great brands, and their warranties around here in British Columbia, Canada are great. Good video.
Plus Snap On changed their warranty at least twice.Not purchased from me excuse used a lot and receipt needed or tool does not get replaced.I have been told about the warranty problems with Snap On
The powerprobe,don't use on a CAN line on 2004 and current vehicle.You will smoke up to 4 computers.Basically a gun shooting 12 volts to a 5 volt sensor.
OK a couple of thoughts: break down all those kits and keep the parts you use most in your box. Build you a shelf and store the case on it. You can obviously afford to do this. Two f- Mac tool boxes, buy vidmars storage cabs. Three Proto is Stanley's premium tool line they make the ASD ratcheting wrenches. You should get those. Four- SK kicks the crap out of Mac well their new stuff does. Every mechanic needs their 15 inch 1/2 drive 40 tooth ratchet. It is basicly a mace. 5) you do not need all those repeat socket sets. I mean you got several 3/8 sets of 12 and 6 points. Pick your favorite and kick the rest out. 6) take everything you never use out of your main box. If you did that you would not hear near as much grief about not using your tools. Which I can tell that many of your tools are not well used. The chrome is still flawless. Stow that crap in a cabinet or a tool crib. Finally if you use something less than twice per year you don't need to upgrade it. You don't even really need it in your box. If you do these thing you'll be suprised how much room youll have in that box. BTW I have all SK base kit, 1/4,3/8,1/2 drive metric and standard socket sets. Mm and saw Wrench's. Various ratchets and ratchet wrenches. Most of my tools are made in USA. At least 300 pieces us made out of around 500 total pieces.
I keep all my tools clean also and I get shit all the time for it.....I can’t help it some people don’t put in the extra effort at the end of the day 👍🏻
I would like to have a Mac guy, but there isn't a Mac guy in North West TN. I buy some of Mac Tools on Ebay. Good stuff. Just for info, The 100 tooth ratchets are also sold under the Matco and Cornwell brands too. Don't remember who exactly makes them though. I have the older Cornwell 72 tooth version and they are pretty solid. Great box!!
When it comes to tools my philosophy is: I rather have it and not need it instead of need it and not have it. You can never have enough tools. There is always some new fastening device that you don't have the tool for which causes you to delay your repair project. I hate that.
Posing with tools don't mean you use them. Dam if you did use them they would be dirty like your hands. Oh wait they look manicured. You would never make any money cleaning your tools. You have to use them first.
out of curiosity, why do you have a pass through socket set and ratcheting wrenches, i would see them filling a similar need, just wondering if you had a specific reason, if not i totally understand wanting to try out new tools and having backups, also i am not a professional so im sure when you reach the level of using everything everyday then trying to find something even a little better might be more important. Just starting to buy tools and wanting to learn as much as i can. thanks
It seems like you've put a lot of time and money into your tools. Theyre nicely organized, but you should have done yourself a favor and bought all snap on tools. U cant go wrong , snap on is the best . period
ok ur box and set up gave me a woody. lol man if i had all those tools u would catch me using my lil 59 piece carry set half the time just so i wouldnt dirty or disturb my beautiful tools.damn man.awesome.some people just dont understand!
Just watched your video on your box. very sharp man. but if you do have ocd you wouldn't want to see my box. It's a twenty year old mac box with tools just piled in. I do have a pliers drawer and a screwdriver drawer but it's pretty disheveled looking. Again though yours looks awesome.
hows the white holding up on your toolbox? I just recently traded in my tool box for a white one with chrome trim rather than black. different brand. But i was just wondering in real life how does the white paint look and stand up to shop environment.
Unless you wipe down your box every couple of days, white will look dirty as hell, the dark blue or red colors you can let go for a while. Looks nice but gotta keep it clean.
awsome tool collection man! you should do a 'how to' video for cleaning tools. I really want to see how you keep your tools that clean, they really look like you got them yesterday. have a nice day :)
Very nice sir! Nicest box/tool set vid I've seen thus far!and I've seen quite a few. The keeping tools in the boxes does waste space but it sure makes organizing and keeping track of tools a breeze... See a lot of haters in the comments lol. It's whatever. Keep up the good work and positive attitude!
Thank you for your valid comment. I had no idea... I will immediately attempt to sell my Mac box and tools; hopefully they are still worth something. Thanks for the heads up bro.
Did you choose mac more for the tools or for the dealer? What I mean is most mechanics I know tend to buy from the truck with the driver who they like the most other than being big on a few tools from each
I like snap on tools and I've used a very small bit of Mac tools but I just like haveing a variety of brand because they are all good for something.I personally and a huge fan of gearwrench because it's fairly inexpensive but will go toe to toe with snap on stuff.know for pliers knipex is deffinatly the shit,and snap on makes about the nicest hammers I've ever seen.each company is better at making some things than others so I try to keep a variety
just got the Mac Tools AW612Q off truck to day got to say /love it / worth every penny - looking forward to getting more make tools and pointer / would help out lot/ 5mnth in diesel truck mechanic only one there working on 28 trucks we are getting 20 more end mnth hope thay get me some help or I will be camping out / any help on what tools I should get next/ 1/2 drive deep 3/8 short 3/8metric craftsman wrenches
kenny I do too. I clean mine off everyday before I leave the shop. Don’t let anyone borrow your tools that doesn’t take care of their own and yours will look great for a long time. The key is do use starting fluid or parts cleaner except on sockets lol. Use tub o towels or mule wipes on your ratchets, cordless tools or any comfort grip then a clean rag to dry em
I got OCD about my tools when I spent the whole day looking for them ended up finding them when I tripped and fell on it. Luckily it had a warranty.....
You taught your son well! All the guys pick on me at my shop for my organization and cleanliness. So, you aren't alone :)
I have a lot of respect for someone who respects and cleans their tools...they're the money makers.
I think it's great that you take time to clean and take care of your tools. I do the same thing. They will last you forever that way.
I wish there were more wrenches like us. On my own adventure of starting my own shop as well as of November '13 and I just crested the $65,000 mark in tools and storage myself. Not including equipment and such, just the tools in my box and two carts. Keep the faith, keep up the hard work, and keep protecting that investment! It is our livelihood every day and its not a cheap way to make a living.
Side note... I have been recently "renovating" my box and carts to maximize space and versatility. You're setup has given me some very good ideas, so a much appreciative thank you! :-)
I wish I could keep my stuff that clean. I end up running tools over, sliding on the floor, always arcing on batteries, pipe wrenches/extensions, drop drills and impacts from ladders, drop my electric impacts and drills in coolant. If the sockets don't fit I grind them down, use all my tools the wrong way -sockets for seal driving - punching - wedging, use ratchets as pry bars, 1/2 inch ratchets for hammers, hit wrenches with hammers etc. Pretty much abuse the shit out of all my stuff and if I'm tired at the end of the day, I take one arm and plow them all into the top drawer and leave. You know, ....exactly like this guy.
You must be a man who actually, get's shit done. I applaud you for one, my good fellow. I too have been know to rapidly modify my tools with an angle grinder or belt sander, just to get the next bit of work done.
If you have to keep reiterating how much you use your tools, you probably don't. My tools get used everyday and they will never look brand new again, no matter how hard I clean them.
You the man.
My snap on pliers look squeaky clean even after absolutely beating the shit out of them
So you work in a office but collect tools?.
Why is everyone hating? I never heard him say once that he's a mechanic, probably just tinkers with his own cars as a hobby, the guy has clearly done well in life
That's true or maybe he works with mac
AWESOME MAC Tools!
I like Mac the best, their wrenches/ratchets/sockets have the best feel compared to the rest!
prybar in with my sockets would make me insane!!! nice box
Oh it does, but only drawer it fits in.
Awesome box,love Mac tools...I wouldn't put HF junk in it though.... prefer IR for air or cordless ...
Wish i had all that ...i got a fucking 10 dollar stanley tool box n a couple sockets and ratchet set n a bunch of wrenches ....and i still get the job done but if i had all that it would make my life easier on basic diy projects ...i know im no mechanic but it would be nice to have all those tools !
Marcus Rodriguez thats how most of us non millionaires start collecting tools.
You did it backwards.
You get the nice and affordable US General harbor freight tool box, and then get Mac / Snapon tools.
+1 doesnt take too much magic to hold tools in a box. Shoulda spent the 1000s on the chrome!
Patrick McClure I kind of disagree, the Mac box makes organizing the tools much easier with the deeper/bigger drawers versus my old HF box. Remember I said "kind of..." The HF box is 100% best bang for your buck. But, the Mac box is so much nicer.
MNJ John im tyring to find the box they had out a few weeks ago was liek 999 for a nice box full of tools. if you know what im talking about hit me up at garret.pigford@gmail.com
yea i have about 20 grand worth of snap on in my 1200 dollar 72 in harbor freight box and couldn't be happier
HF now has that cart in white
The guy's got like $40k in tools. I can't believe you are giving him shit for keeping his small fortune clean. There's nothing wrong with cleaning tools, especially when they get covered in grease and oil at the end of the day.
I disagree. I heard half of this before turning it off. This is for OCD people that may be on or do not like the side-effects of the meds. Find another doctor. As for Mac tools and your collection (I understand some people "collect" tools just because) I find fascinating. Stop the OCD thing and get some good care and start fixing shit with that awesome box.
The guy works on Lamborghinis in his garage. He does plenty of work on cars. Would you rather have a mechanic that does a shit job on your car, doesn't clean anything, throws things together, and doesn't care about what he's doing (and wind up with a car that would likely break again because it wasn't repaired correctly), or use a mechanic like John who has an extreme attention to detail, and cares about what he does? He takes pride in his work and his tools. I do the same. Everyone now a days just doesn't give a shit. Forget the OCD. What does your toolbox look like? I'm dying to know. It better look like a filthy mess with badly any tools in from the way you're talking shit.
My brother owns a Macsimizer, bright red ,it is stone cold filled. He works mostly with omc and bombardier engines. Years ago I worked on omc small outboards...I had a small box with mostly snap on tools. My brother was meticulous with repair or rebuilds he worked on.. Yes he wiped down his tools and had a certain spot for everything . But hey... if he is working on Lamborghinis that's his problem when the client wants his machine at a certain
time and the mechanic is fucking around with his tools...I like the dude's Macsimezer and set up. His mental health is his own deal but he felt free to share...Best wishes to all of you hard working mechanics that make to world go 'round.
clean all my tools at the end of the week i payed a lot for my tools only a fool wouldnt want them to look good stay clean snap-on buy tools back from me almost fool price
Garret Pigford Just used an old pair of my late grandpa's pair of snap-on side cutters from the early '80's. I remember cutting hard open steel wire with them ....just found them and used them to clip open an item from Staples!!! Great tools and worth the money! Take care my friend...Bc.
Love that you have a tool box for your son I have a buddy with a daughter and she is the same way always in the garage helping her dad I think it is very cool!!
You are much appreciated for making a long version of your box! I wanted to let you know that if you are looking for a good deal to match your cart up with the box I think I have a good idea for you to save money on shipping! You said that you wanted the 4 drawer right? Well, we can just buy it in town for you and since its disassembled it saves him time! Message me if you think you might be interested
His son has a better tool set up than I did after I graduated tech school -.-
I did
Pretty nice. I like the box. I don't have nearly that many tools and I don't even have a big box, but I do keep what I have clean. I'll often times clean them at the end of the day and reorganize as needed. I've seen boxes that look like people just threw the tools in from across the room. It takes them 10x longer to find something.
Very nice, I have a hard time keeping everything that clean but i try the best I can, stupid people hating on how clean this is, just because someone has the patience to keep tools organized doesn't mean they dont use them.
Beautiful tools and there is nothing wrong with keeping your tools clean . I wouldn't alter that expensive tool box. The stainless should be easier to clean. They sell one inch thick black rubber mats used in weight lifting rooms could be used to cover the top and prevent the top from getting dented. One thing is for sure your mac guy must love you. He should give you a bottle for Christmas.
Damn dude. You don't fuck around. You got the dank to work with.
dude if your kids building legos in an OCD fashion get him a mechanical engineering textbook when he turns 12 lol
There is a truck that comes to my shop. They got these fancy tools called snap on. My preference all the way the only mac stuff I have is body hammers and I'm gonna keep it that way. Love those boxes tho.
This box is bad ass you inspired me to fix my box up and organized when I show people my tool box now their in awe lol good videos love your set up
That's a nice come up from the harbor freight setup you had before..real crispy! Couple of things...That upper left drawer would be a great spot for your pliers with a pliers rack running along the length of the drawer. I just did mine because I had a shallow middle drawer with pliers everywhere laying around. As far as the stainless top go with rhino lining, it has a softer, glossy finish that will compliment your drawer pulls better. Line-x has more of a gritty matte finish to it. Then later on get yourself a hutch and side cabinet for all of your blow mold cases, and you'll free up tons of space for more tools.
I have the triple bank tech series in lime green with the black drawer handles. When I got my stainless top the first thing I did was take it to ziebart and have them shoot it with a few coats of rhino. Looks way better in black and doesn't stick out like a sore thumb. I had to modify my hutch as well because it came with a chrome moulding strip across the front that didn't go with the color scheme either..Heat gun made quick work of that though. My next upgrade will be the side cabinet for cases and such. Looking real good man, nevermind the haters talking mess about how clean you keep your tools-Keep on slingin that chrome brother!
Nice tour F those other guys who say you don't use your tool because they are clean. I clean almost all my tools, if I'm gonna spend that type of money on my tools and box they are both gonna be clean, again nice set up from another OCD person 👍👍👍👍👍
Your son is the same way that I was with my toys “if it ain’t the way I like it your wrong and I’ll change it to how I like it” it’s nice to see he has an interest in wrenching, I’m 16 and I like to think I’ve got a pretty good tool collection I want to be a heavy duty ag mechanic and I’m amassing a collection of tool and my garage ain’t big enough lol
Yes they do, you don't have to pile stuff or dig through a lot of small boxs or wonder where something is everything has its spot and you know if something is missing. Saves time and money.
Beautiful box. Great tools, but how can any professional tech watch this and not think what I'm thinking. Not a mark on anything.
Dave G especially stuff like the prybars. the fucking prying ends dont have a mark on them. any prybars ive ever bought snap on mac matco mayhew look beat up after the first use. there is no way to stop the ends fro getting marred up if u use them. also the white makita set. come on what do u do wash your hands every time u go to puck tgem up during a job. that white is not going to look brand new if they were used everyday. i dont care who u are. everone drops or scratches drills and impacts i tight spots and there is not a mark on them fuckin things
Jessie lopez you have to love you're job as mechanic to enjoy. Your tools
i seriously wish you would do a torture test video comparing and measuring the force required to break the Pittsburg pro metal and composite ratchets / breaker bars to that of a comparable snap on or mac/matco. i think you one of the few pro mechanics that have owned both that is actually willing to publicly state that there are some decent quality tools to be had from HF.
AMAZING LOOKING BOX!!!AMAZING SET OF TOOLS!!!.WELL PUT TOGETHER THIS WOULD MAKE A FRONT PAGE OF A MAG.SO DONT WORRY ABOUT THE NEGATIVE PEOPLE THEIR JUST BITTER.
so you wanna look like a good mechanic?
joenunzS3 yepppp
Is a good mechanic
Somebody that loves Mac tools. I love it. I miss my Mac guy.......
Great thing to do for your son, if he doesn't remember the 1st tool set you will, make for great father son moments. Thanks for the vid watch all your vids
Be nice to have the time to clean and organize like that
Best looking MAC box I have seen!
Yo man Ernst socket/ratchet/extension organizers. You will thank me later. Ernst has kept me sane for years!
Why you need to prove yourself from using or not your tools? You have them and that's good enough. You use a few on a regular bases and the rest is there in case you need them to make the job easier and faster from having the right tool. Nice to see you trust regular brands instead of the more expensive like Snap-On.
All of my hand tools are craftsman, husky, harbor freight or kobalt. They all have served me well. I buy tool truck specialty tools and keep them in a 52 inch husky box and a harbor freight 4 drawer cart. I make the same money as the guy next to me who has all snap-on stuff.
Nice toolbox there John looks like you could handle about anything with those tools. Wish i could afford those truck brands, but with a 200$ a month tool budget I better stick with my SK and Gearwrench tools Lol.
SK tools are really nice too.
SK has tool trucks dude. You will see mobile dealers more in the future.
This guy sounds like a great father. Good to see.
I still remember the first tool, and toolbox my dad gave me. Way to go.
Boy who would guess these guys would be the uptight type. Haha. I also work in a crazy busy shop ans also buy the best & keep them crazy organized. But if you say they don't get scratched, and worry about the shine then you can't be using them in a production setting or working commision. Maybe hourly and milking the clock. But whatever, what a ridiculous argument.
So many people bitching about how clean his tools look, but that tells me that this man takes pride in his tools which he has obviously invested a lot of money on. If he is willing to take that much pride in his tools? Then you can bet he takes pride in his work! I would much rather have someone work on my car who is OCD with their tools than someone who doesn't give a shit! Plus I can relate to this. I'm just a simple DIYer and I am completely OCD about my tools!
Do not paint stainless steel
I have just as many sockets as you and I have to know what you would suggest for socket rails or trays. I love the fact you are so organized. That is exactly how I am so having all my tools not organized right now is driving me crazy. Please help me! I'm so picky and indecisive.
I'm a backyard mechanic, meaning I work on my two mowers, mine and my wife's dirt bikes, our four wheeler, both our vehicles, small engine machines like blowers and weed eaters, plus anything my friends ask for help on. Just with that little bit of work, my tools look very used. I even tried to clean and shine them really well after watching this video. Nope, still look used.
Point is, these tools don't get used. Look at the sockets and ratchets. Simply sliding a socket on the ratchet creates wear marks, rubbing some of the finish off. None of his are like that. Screwdrivers are the same way. Once used, a little bit of the finish rubs off.
As a backyard "mechanic", I use HF, Craftsman, Stanley and Husky, just like a lot of his tools. I know what they look like after being used, and they don't look like his.
That is AWSOME. I got all sorts of tool envy going on over here!
how you treat your tools varies from mechanic to mechanic, some guys keep their boxes and stuff ultra clean and organzied, other guys open a drawer and its just a huge junk drawer with random sockets and ratchets mixed in, black from oil grease and dirt. i try to keep my tools clean because of the money i've spent on them, hell i even wax my toolbox occasionally. however that doesn't mean i dont wrench, because i just dont like to see my shit dirty
those mac tools precision wrenches are actually a facom design but chrome I have a set of the facom version and like you said they wont let go or slip handy for saving your knuckles.
ya know, i gotta say - when i left that previous comment, this was the first video of yours that i watched.. now that ive seen a few and have some sort of concept of your history, i really kinda feel like you're a great inspiration for a lot of people.. really hope your business keeps growing, just to prove to people thats still a shot at being "self made". one of the cars in your shop had jersey plates - you wouldnt happen to be located by the woodbridge harbor freight? great vids - subscribed
Glad to see that you take care of your tools.
Great looking setup. I own Mac and Snap-On. I think they are both great brands, and their warranties around here in British Columbia, Canada are great. Good video.
Tool box queen
Plus Snap On changed their warranty at least twice.Not purchased from me excuse used a lot and receipt needed or tool does not get replaced.I have been told about the warranty problems with Snap On
Awesome tool setup! People can hate this but either way, at least he know where all his tools are compared to throwing it in a draw...
The powerprobe,don't use on a CAN line on 2004 and current vehicle.You will smoke up to 4 computers.Basically a gun shooting 12 volts to a 5 volt sensor.
What do you use to clean you tools to keep them look.like That? The handles of the ratchets or screwdriver always get fade.
Your cart just paint corners black & bottom tray black..put 6inch swivel wheels on it..be able to pull outside on gravel to do a repair..👍😷
OK a couple of thoughts: break down all those kits and keep the parts you use most in your box. Build you a shelf and store the case on it. You can obviously afford to do this. Two f- Mac tool boxes, buy vidmars storage cabs. Three Proto is Stanley's premium tool line they make the ASD ratcheting wrenches. You should get those. Four- SK kicks the crap out of Mac well their new stuff does. Every mechanic needs their 15 inch 1/2 drive 40 tooth ratchet. It is basicly a mace. 5) you do not need all those repeat socket sets. I mean you got several 3/8 sets of 12 and 6 points. Pick your favorite and kick the rest out. 6) take everything you never use out of your main box. If you did that you would not hear near as much grief about not using your tools. Which I can tell that many of your tools are not well used. The chrome is still flawless. Stow that crap in a cabinet or a tool crib. Finally if you use something less than twice per year you don't need to upgrade it. You don't even really need it in your box. If you do these thing you'll be suprised how much room youll have in that box.
BTW I have all SK base kit, 1/4,3/8,1/2 drive metric and standard socket sets. Mm and saw Wrench's. Various ratchets and ratchet wrenches. Most of my tools are made in USA. At least 300 pieces us made out of around 500 total pieces.
Nice clean layout. You have a set of tools there to be proud of.
i have the makita 12v impact and drill, love the impact use it daily more than a ratchet but the drill broke after like 2 months of minimal use
Man that WHITE is so beautiful!!
I keep all my tools clean also and I get shit all the time for it.....I can’t help it some people don’t put in the extra effort at the end of the day 👍🏻
This is an awesome video. I love these tool box tour videos. You should make some more videos of just everyday around the shop type stuff.
I would like to have a Mac guy, but there isn't a Mac guy in North West TN. I buy some of Mac Tools on Ebay. Good stuff. Just for info, The 100 tooth ratchets are also sold under the Matco and Cornwell brands too. Don't remember who exactly makes them though. I have the older Cornwell 72 tooth version and they are pretty solid. Great box!!
When it comes to tools my philosophy is: I rather have it and not need it instead of need it and not have it. You can never have enough tools. There is always some new fastening device that you don't have the tool for which causes you to delay your repair project. I hate that.
Posing with tools don't mean you use them. Dam if you did use them they would be dirty like your hands. Oh wait they look manicured. You would never make any money cleaning your tools. You have to use them first.
im surprised you dont have milwaukee for electric tools cause the black and red theme, it matches perfectly with mac
out of curiosity, why do you have a pass through socket set and ratcheting wrenches, i would see them filling a similar need, just wondering if you had a specific reason, if not i totally understand wanting to try out new tools and having backups, also i am not a professional so im sure when you reach the level of using everything everyday then trying to find something even a little better might be more important. Just starting to buy tools and wanting to learn as much as i can. thanks
you keep your tools in amazing shape
i like you toolbox collection i need to look after my tools but i never do i just recently upgraded to a snapon 42 inch top and bottom box
It seems like you've put a lot of time and money into your tools. Theyre nicely organized, but you should have done yourself a favor and bought all snap on tools. U cant go wrong , snap on is the best . period
ok ur box and set up gave me a woody. lol man if i had all those tools u would catch me using my lil 59 piece carry set half the time just so i wouldnt dirty or disturb my beautiful tools.damn man.awesome.some people just dont understand!
Just watched your video on your box. very sharp man. but if you do have ocd you wouldn't want to see my box. It's a twenty year old mac box with tools just piled in. I do have a pliers drawer and a screwdriver drawer but it's pretty disheveled looking. Again though yours looks awesome.
I think the craftsman sockets that dont have the laser etching are better
So how much money you reckon the box with all the tools?
just curious. why didnt you go with all mac tools sockets rather than harbor freight and craftsman?
hows the white holding up on your toolbox? I just recently traded in my tool box for a white one with chrome trim rather than black. different brand. But i was just wondering in real life how does the white paint look and stand up to shop environment.
Unless you wipe down your box every couple of days, white will look dirty as hell, the dark blue or red colors you can let go for a while. Looks nice but gotta keep it clean.
It's fine, I love it.
awsome tool collection man! you should do a 'how to' video for cleaning tools. I really want to see how you keep your tools that clean, they really look like you got them yesterday. have a nice day :)
I like the display.
Also very nice to see most tools stay in a brand-new state.
WTF??
one of the best videos I've seen yet...
all tool manufacturers' chrome sockets are made in the same place. mac tool boxes are made in the same place as matco and extreme tools
Very nice sir! Nicest box/tool set vid I've seen thus far!and I've seen quite a few.
The keeping tools in the boxes does waste space but it sure makes organizing and keeping track of tools a breeze...
See a lot of haters in the comments lol. It's whatever. Keep up the good work and positive attitude!
Thank you for your valid comment. I had no idea... I will immediately attempt to sell my Mac box and tools; hopefully they are still worth something. Thanks for the heads up bro.
Did you choose mac more for the tools or for the dealer? What I mean is most mechanics I know tend to buy from the truck with the driver who they like the most other than being big on a few tools from each
I like snap on tools and I've used a very small bit of Mac tools but I just like haveing a variety of brand because they are all good for something.I personally and a huge fan of gearwrench because it's fairly inexpensive but will go toe to toe with snap on stuff.know for pliers knipex is deffinatly the shit,and snap on makes about the nicest hammers I've ever seen.each company is better at making some things than others so I try to keep a variety
one of the nicest boxes i have ever seen what do you think to mac tools would you recommend them to a pro tech?
I love your tools !!! :(:)
just got the Mac Tools AW612Q off truck to day got to say /love it / worth every penny - looking forward to getting more make tools and pointer / would help out lot/ 5mnth in diesel truck mechanic only one there working on 28 trucks we are getting 20 more end mnth hope thay get me some help or I will be camping out / any help on what tools I should get next/ 1/2 drive deep 3/8 short 3/8metric craftsman wrenches
I would love to be organized like this.
I think the point is that all the major tool manufacturers are about the same they all have good and bad products. its down to what you prefer.
I love how guys say he doesnt use his tools.....i know 3 mechanics who keep there tools as pristine as this...
kenny I do too. I clean mine off everyday before I leave the shop. Don’t let anyone borrow your tools that doesn’t take care of their own and yours will look great for a long time. The key is do use starting fluid or parts cleaner except on sockets lol. Use tub o towels or mule wipes on your ratchets, cordless tools or any comfort grip then a clean rag to dry em
Nothing wrong with keeping your tools clean. I hate when oil and shit gets on them.
I got OCD about my tools when I spent the whole day looking for them ended up finding them when I tripped and fell on it. Luckily it had a warranty.....
Hi man where did you get the anti vibe hammers in the the plastic blow moulding
have u had a snap on box, how do u compare the thinkness + drawers between mac , matco & snap on ?
I don't care what you do with your tools Love video
What do you use to clean your tools?
The pry bar in the top drawer is killing my OCD!!
Hey there can u tell me what you use to clean your tools? And what's the technique please your tools are beautiful