2013 VW GTI: Episode 57 Vlog: Unitronic DV Relocation Kit

Поділитися
Вставка
  • Опубліковано 16 чер 2014
  • This video tells you about the Unitronic DV Relocation parts and installation. This mod gave me a definite power increase in my low end for some reason. / lasthumansvideos
  • Авто та транспорт

КОМЕНТАРІ • 49

  • @thisguy0525
    @thisguy0525 2 роки тому +3

    Old video I know, I'm not sure if it was mentioned but the 1 1/2" cap is cover the noise pipe port on the stock throttle pipe. It's the large plastic tube running from the passenger firewall to the throttle pipe. Most people have already 86'd this pipe

  • @m.r.i.a8813
    @m.r.i.a8813 6 років тому +2

    Great review and install. I’ve been looking at this for a while for mine and I’m glad you went through all the parts and where they go. Great video!

  • @miketrapp2604
    @miketrapp2604 10 років тому +1

    yeah I know it ads a little more hoses and stuff but makes it so much easier to get to the DV as well as moving it from the hot to cold side is a major plus..... thanks for your input.

  • @radtech0509
    @radtech0509 9 років тому

    Awesome! Thanks for the quick response!

  • @thisguy0525
    @thisguy0525 2 роки тому +1

    I've run these kits before, but I kept my stock throttle pipe. Instead of using the new Y throttle pipe, I simply used the existing noise pipe port, mounted the dv next to the N80 and used a slightly longer inlet tube. Then instead of using the harness extender I just repinned it with longer wires. This was long before I knew there was a kit. But in total I believe I spent $60 bucks. The block off plate is 40 I think, then what ever the 11/2" tubing and extra wire cost. My intake already had the small port as well as my stock throttle pipe. Oh also the dv adapter is sold seperate I forget how much. All in all I spent a portion of what the kit costs

  • @tannerbarrera7897
    @tannerbarrera7897 Рік тому

    I’m running this intake and dv on my 2011 vw ccc. Sounds very nice no obnoxious whistle like I had with just the intake

  • @geriatricginger
    @geriatricginger 2 роки тому

    VERY WELL explained. Thank you.

  • @mixel2036
    @mixel2036 5 років тому

    Great video Man Thanks 🤙

  • @radtech0509
    @radtech0509 9 років тому

    Thanks for the feedback. My other question would be would the GFB DV+ fit on the Unitronic dv relocation kit?

  • @radtech0509
    @radtech0509 9 років тому +1

    Did you find a better solution from the unitronic DV relocation kit or was it just your personal preference that you didn't like the extra hoses? I'm looking at getting the Unitronic cold air intake and was wondering if I should go ahead and get the add on coupler so I don't have to deal with removing the intake later on to install the DV kit?

    • @LastHumansGarage
      @LastHumansGarage  9 років тому +1

      i didn't try any other DV relocation kits, so i don't know if the Unitronic is the best. There are not a lot of choices. If you think you may get it some day, you might as well get that altered coupler.

  • @garciamarco8324
    @garciamarco8324 7 років тому

    How often do you clean your engine bay? It always looks spotless! Great videos!

  • @miketrapp2604
    @miketrapp2604 10 років тому

    Is there any other place to get it I have checked over the last couple months and they never seem to have it in stock. Love you videos by the way keep it up.... thanks

    • @LastHumansGarage
      @LastHumansGarage  10 років тому

      lot of uni stuff is hard to find in stock.. i sold this kit a long time ago. i didnt like the added mess and hoses.

  • @miketrapp2604
    @miketrapp2604 10 років тому

    I have been looking for this kit everywhere.... where did you get your kit or where can I find it?

  • @quentinwarman8720
    @quentinwarman8720 10 років тому +1

    On most MK6's the Unitronic Cold-Air Intake and some others cause a high-pitched whistle at high rpms. Supposedly this DV Relocation kit gets rid of that whistle. But I have yet to install mine and see if the whistle is no more.

    • @LastHumansGarage
      @LastHumansGarage  10 років тому

      this kit always gets rid of the intake whistle. in addition it moves the DV from the hot side to the cold side, diverting colder air back into the system.

  • @mike51936
    @mike51936 8 років тому +1

    I seem to have a boost leak on my 14 gti after installing. Is the DV+ necessary to install this kit because it wasn't provided by unitronic?

    • @LastHumansGarage
      @LastHumansGarage  8 років тому

      +Michael Diodoro no. the DV+ is a completely different product from a different company

  • @haMonyqueso
    @haMonyqueso 5 років тому

    This won’t kit won’t fit a stock intake pipe ? Am on stage 2 and I have a dv from forge it raaaaaaaaaaping my gas mileage right now just need to kno if I have to finish the rear part of my intake before I buy this kit

    • @LastHumansGarage
      @LastHumansGarage  5 років тому

      dont think the adapter would match up, not sure.

    • @haMonyqueso
      @haMonyqueso 5 років тому

      @@LastHumansGarage yes it wont u do need rear intake

  • @jonnydcan9482
    @jonnydcan9482 2 роки тому

    Do i have to have Unitronic CAI to install this or can i install it without a CAI?

  • @user-xp1mt1gj3b
    @user-xp1mt1gj3b 3 роки тому

    I have some questions. How different about this kit and this kit+dv+. What is the best for gti mk6

    • @LastHumansGarage
      @LastHumansGarage  3 роки тому

      one is a relocation kit. the other isnt.

    • @user-xp1mt1gj3b
      @user-xp1mt1gj3b 3 роки тому

      @@LastHumansGarage 1.unitronic relocation kit with dv+.
      2.unitronic relocation kit only

  • @christoffer1973
    @christoffer1973 9 років тому

    hey. what's the point of relocate the DV? what does it do? maybe stupid question but I wonder. nice video.

    • @LastHumansGarage
      @LastHumansGarage  9 років тому +1

      +christoffer1973 recirculates hot air away from the intake.

    • @christoffer1973
      @christoffer1973 9 років тому

      LastHumansGarage Ok. Thank you.

  • @impressive03
    @impressive03 4 роки тому

    i dont see why they say this does not fit Gen3 Gli , other than maybe needing to maybe make some fab work on the throttle pipe

  • @AdamBingley
    @AdamBingley 10 років тому +4

    whats the actual reason for installing this kit?

    • @Jakefromstatebarn
      @Jakefromstatebarn 6 років тому +1

      Adam Bingley I'd say to make it easily accessible really. Plus gives an easy swap to a blow off valve afterwards 👍🏼

    • @user-ln4yn8iv2y
      @user-ln4yn8iv2y 6 років тому +2

      Removing the Diverter Valve from the heat of the exhaust manifold improves durability, while improving functionality and responsiveness.

    • @alexvirola864
      @alexvirola864 6 років тому +1

      Borgwarner k04 comes with no dv port. This is a gold app for that

  • @AoH9999
    @AoH9999 10 років тому +5

    I'm interested in this as well, but I'm not sure what it will do for me, besides empty my wallet........

  • @jp450r
    @jp450r 3 роки тому

    why would it add power?

    • @LastHumansGarage
      @LastHumansGarage  3 роки тому +2

      this was 7 years ago? did i say that? because it reroutes the path away from the heat i think? this was a long time ago

  • @teamspaceman480
    @teamspaceman480 7 років тому

    did you ever figure out what that cap was for?

    • @edgarperez87
      @edgarperez87 7 років тому +1

      Courtney Wilmer sound pipe delete