thanks a lot for the video uploads helped me a lot !! just got done putting the tail light for my bike !!! keep the nice work and safe riding out there !!!!
np enjoy your new tail light! I am in the process of scrapping everything I've done to my bike. Turning it into a track only bike, dont plan on riding on the street much anymore. Only going to keep the tail light, tag bracket and headlights in case i want to ride a little.
I've never personally seen the j'neer tail light in person. Those guys look like they do great work, my only problem is that $200 is a little high of a price for me. I got my light for $60 shipped from another forum member. The other thing i dont like about the j'neer is that the brake and signal lights are separated, makes them seem small to me. But again i've never seen it in person. Great thing about the j'neer is the perfect fitment. song is: Tycho - Dictaphone's Lament
It will fit, If you buy just the 05-06 tail light you have to sand it down yourself. You can buy some kits that come pre-sanded. The fitment is not the best, but it looks very good. After it's installed you really can't tell it doesn't belong there.
i have a yoshi RS-5 on my 08 cbr, it looks like a thight fit but i think i can make it work! finally found a eliminator kit that dosnt look like ass : )
did all this but have yet to put the plate bracket that it comes with on...not sre where the screws go exactly..yours looks to be in a diff location from where the picture instructions that they give tell us to...any suggestions?
Yeah, im thinking that would be the right thing to do. Trade some emails with who ever your are buying it from or go to a website that lets you pick between modifications for 05-06 and 07-08. Good luck.
@cachidril Resitors came with the integrated light. If you watch the proton installation video I replace the resistors for a custom relay that is plugnplay. It works much better and you can toss the resistors away. You can find them at customled add a dotcom at the end of that.
The carbon fibre doesent get anywhere near as hot as any of the metal ones. + his exhaust is way back form the light. if the actual exhaust gasses were getting around the light it would (over time) stain it. It kinda tints it haha. and looks cool on some bikes. Thanks for showing ppl to put resistors on them viewdo600rr. NICE pipe 2broz is my fav! for sound.
sure Yellow wires are for the turn signals red is for the brake light green is for the running light black is for ground Im pretty sure thats the right order
if you buy the kit from tripageled website he also sells brackets for you to attatch the light. I have it held in there with just pressure from the fairing. Its made by Clear Alternatives.
you can buy some small L brackets from tripageled but i just left my light held in there with pressure from the tail. It's been that way for 4 months now? No problems at all.
the tape was in there just to temporarily hold the light in place. Tape is not really necessary once you get the hang of it. You can just put it in there with some pressure and the light will be pinned between the battery tray and the tail fairing. Let me know if you need any more clarification.
did you think that the resistors made the turn signals brightness a lot less?because on my 00'kawasaki ninja zx6r it made them so dim you could barely see them but without them they were very bright
If you're installing this kit or something similar make sure to look into the LED relay(if you want stock blink rate) that i installed at the end of the proton install video. It replaces the bulky white resistors used in this video. Really easy to install, plug and play.
if you buy this light you will have to do what i did. However there are some newer lights out there that are plug and play. You will still have to cut the tail plastic but the rest should be straight foward. Try iwinmoto tail light. I cant post the link cause youtube sucks!
so what you have to do to the rear fairing for the light fit very well, cos i bought one and at the end of the fairing there is pretty much space, so what do you do, i see secure it with tape but then? thanx...
I have plug & play integrated light but for some reason it keeps burning my ground wires 3 times now I have had to go thru the bs work of replacing ground wires I’m sick of it so I u plugged my lights idk what’s going on
Do you have to remove the heat shield? Does it get to hot? Do you need to use the silicone tape? I just got the light and i wanna replace the stock one this afternoon, i want to be prepared.
I just got a bike and it did not come with tail lights and I never hooked up tail lights before and this did not show me that shit. I tried the yellow wire and the other yellow wire to the orange and blue and it didn't do shit.They didn't have no power to her or nothing.
Nice write up, I think I am going to trade my flush mounts in for an integrated tail light. Personally though, I do not like the look of the two brothers exhaust on the double r, great exhaust just not my cup of tea for this bike.
What the hell i have an 07 and i cant find a kit for that year anywhere! please tell me where you got yours all i find is 03-06 years only. i already have a led strip but cars not seeing them at night whats me to make the switch.... thanks for any info
I already wired in a fender eliminator. so i had to cut the stock connectors off. Is it possible to wire this into what i already have spliced together?
Should be easier on an 05. Just make sure you dont get a modified 05-06 tail light that fits an 07-08. My friend has an 05, it's very similar but you wont have any problems with fitment.
Not sure, plenty enough for the exhaust to be running for 1 hour or so in stop go traffic. Doesnt get any hotter than that, especially here in florida. No one else has complained about melting issues in the forums either. The dealer most likely wants to install their own "mod" on your bike and charge you for it. I've had this setup for a little longer then this video has been up. roughly 5000 miles or so.
this is very noob, but are you just modding the stock tail lights? or are you installing a different tail light. Because if you simply modding the stock, im doin it asap!
dude worst fit ever like you said! but at the end of it all they do look stock only thing i noticed was the back seat didnt sit as flush did you have this problem?
just buy a new flasher relay, dont mess with the resistors, they suck. Installing a new relay is easy, plug n play. I did it in the proton installation.
josh w is it the Kratos ones on amazon? I have an 07 cbr600rr and I was wondering if it would fit on my 07. www.amazon.com/gp/aw/d/B0052O8DCG/ref=ox_sc_act_image_4?ie=UTF8&psc=1&smid=A18132C77AG5IR
The tail lights were already integrated and then he removed them to put on another thing I don't know the name of. I wanted to how how you install tall turn signals, not what ever the fuck he put on. Pls halp.
How to make yourself less visible to drivers with their head up their ass... use an integrated LED tail light. Just hope there isn't a car in front of you when someone hits you from behind.
600kawasakininja. There is something wrong man. dunno what but doesent sound right. get that fixed or it will rune or burn out your regulator rectifier. this goes for all you guys putting a lesser wattage aftermarket signals on any bike. especially replacing regular bulbs with smaller ones or LED s!
who ever told you that is grossly misinformed. Everyone I know of running this setup has never had their light melt. Even with the heat shield removed.
thanks a lot for the video uploads helped me a lot !! just got done putting the tail light for my bike !!! keep the nice work and safe riding out there !!!!
Wow that really cleans up the look of the bike. Gonna buy one of these.
thank you, you too!
Finally getting cooler down here in florida, should be some nice riding weather.
np enjoy your new tail light!
I am in the process of scrapping everything I've done to my bike. Turning it into a track only bike, dont plan on riding on the street much anymore. Only going to keep the tail light, tag bracket and headlights in case i want to ride a little.
Awesome video, buddy got the 09 phoenix cbr600, and we just installed it looks great. Awesome vid.
I've never personally seen the j'neer tail light in person. Those guys look like they do great work, my only problem is that $200 is a little high of a price for me. I got my light for $60 shipped from another forum member. The other thing i dont like about the j'neer is that the brake and signal lights are separated, makes them seem small to me. But again i've never seen it in person. Great thing about the j'neer is the perfect fitment.
song is: Tycho - Dictaphone's Lament
Hey, nice job. Good video and the bike looks great.
Your videos are awesome!
genius!! master!! great video and music . Leandro from argentina
you sir, are a crafty SOB... mi sure this will come in handy soon. thanks
great video man. it helped me out a lot. nice music too i might add ha. thanks man!
Nice. Worked for me
Thanks, I am going to document everything on my bike. Probably going to upload another video this next week covering chain maintenance.
It will fit, If you buy just the 05-06 tail light you have to sand it down yourself. You can buy some kits that come pre-sanded. The fitment is not the best, but it looks very good. After it's installed you really can't tell it doesn't belong there.
i have a yoshi RS-5 on my 08 cbr, it looks like a thight fit but i think i can make it work! finally found a eliminator kit that dosnt look like ass : )
ooohhh now i get it...you just shove the light in there all the way...i didnt want to break anything lol...much thanks for the vid!!!
Received some flak for this! I did end up soldering the wires later.
did all this but have yet to put the plate bracket that it comes with on...not sre where the screws go exactly..yours looks to be in a diff location from where the picture instructions that they give tell us to...any suggestions?
Yeah, im thinking that would be the right thing to do.
Trade some emails with who ever your are buying it from or go to a website that lets you pick between modifications for 05-06 and 07-08.
Good luck.
@cachidril Resitors came with the integrated light. If you watch the proton installation video I replace the resistors for a custom relay that is plugnplay. It works much better and you can toss the resistors away. You can find them at customled add a dotcom at the end of that.
@MrKal643 It is a modified 05-06 light that fits into the 07. I believe it is LP, im not positive though, its been so long.
@ChodeBronson lol, thanks for the comment. No problems so far riding the bike, my branch arms are holding strong.
sem coments, fico muito legal paraebens
thanks man...
@atxmatt23 the song in this is called "Dictaphone's Lament"
yes it is
@scibble322 It has to be modified to fit but this is an 05-06 model light
The carbon fibre doesent get anywhere near as hot as any of the metal ones. + his exhaust is way back form the light. if the actual exhaust gasses were getting around the light it would (over time) stain it. It kinda tints it haha. and looks cool on some bikes. Thanks for showing ppl to put resistors on them viewdo600rr. NICE pipe 2broz is my fav! for sound.
i agree, if you watch my proton install video i replaced the resistors with the flasher relay. Resistors are crap!
Nothing is required, just the way I chose to do it. Its more permanent that way. You can use whatever method you want to connect the wires.
sure
Yellow wires are for the turn signals
red is for the brake light
green is for the running light
black is for ground
Im pretty sure thats the right order
song is: Tycho - Dictaphone's Lament
i have the orange '08, with a two bros pipe also. no problems with the heat from the pipe i take it?
excellent vid man!! however i think the resistors they send in the kit are trash, its much easier to get a new flasher relay from custom led
if you buy the kit from tripageled website he also sells brackets for you to attatch the light. I have it held in there with just pressure from the fairing. Its made by Clear Alternatives.
you can buy some small L brackets from tripageled but i just left my light held in there with pressure from the tail. It's been that way for 4 months now? No problems at all.
will work fine with the original exhaust.
the tape was in there just to temporarily hold the light in place. Tape is not really necessary once you get the hang of it. You can just put it in there with some pressure and the light will be pinned between the battery tray and the tail fairing.
Let me know if you need any more clarification.
did you think that the resistors made the turn signals brightness a lot less?because on my 00'kawasaki ninja zx6r it made them so dim you could barely see them but without them they were very bright
If you're installing this kit or something similar make sure to look into the LED relay(if you want stock blink rate) that i installed at the end of the proton install video. It replaces the bulky white resistors used in this video. Really easy to install, plug and play.
if you buy this light you will have to do what i did. However there are some newer lights out there that are plug and play. You will still have to cut the tail plastic but the rest should be straight foward. Try iwinmoto tail light. I cant post the link cause youtube sucks!
the Clear Alternatives Integrated tail light is a modified 05-06 tailight for the cbr 600. This is simply the install, you have to purchase the light.
so what you have to do to the rear fairing for the light fit very well, cos i bought one and at the end of the fairing there is pretty much space, so what do you do, i see secure it with tape but then? thanx...
I have plug & play integrated light but for some reason it keeps burning my ground wires 3 times now I have had to go thru the bs work of replacing ground wires I’m sick of it so I u plugged my lights idk what’s going on
can you tell me how you connect the wires. i am trying to do it on a r6 00 but the first own cut out the connector and everything is a mess.
do u have to do it the way u did or is the kit some pug and play?
i have the same bike but i have the original exhaust...it feet or the original exhaust is very close to tail?
Do you have to remove the heat shield? Does it get to hot? Do you need to use the silicone tape?
I just got the light and i wanna replace the stock one this afternoon, i want to be prepared.
no the resistors did not dim my signals. Same brightness with and w/o.
do you recomemend the j'neer hanger light?
also what song is this?
(fellow 600rr member)
What did you put on the back of your light? I'm referring to the thing you stuck on it.
where did u buy that silicon tape it looks pretty thick what brand? thanx in advance
What about the brake light wires?
I just got a bike and it did not come with tail lights and I never hooked up tail lights before and this did not show me that shit. I tried the yellow wire and the other yellow wire to the orange and blue and it didn't do shit.They didn't have no power to her or nothing.
Hey i did this but my brake light doesnt work only my blinkers work???? Help pls
How did the taillight stay in there? did i miss it?
@viewdo600rr Actually I believe it is Clearn Alternatives that made this headlight.
It's been a while :(
Hello,
where I could buy that lantern for my CBR 600 RR '08?
Thank you
i bought a integrated tailight from ebay and it doesnt seem to fit flush! help!
Nice write up, I think I am going to trade my flush mounts in for an integrated tail light. Personally though, I do not like the look of the two brothers exhaust on the double r, great exhaust just not my cup of tea for this bike.
It doesnt fit flush, thats why its an 05-06 tail light. It works fine if you get it in there.
no problems with heat.
What the hell i have an 07 and i cant find a kit for that year anywhere! please tell me where you got yours all i find is 03-06 years only. i already have a led strip but cars not seeing them at night whats me to make the switch.... thanks for any info
I already wired in a fender eliminator. so i had to cut the stock connectors off. Is it possible to wire this into what i already have spliced together?
were you able to wire them in?
what kind of resistors did you used ?????
Would this work for a 94 cbr600
Where can I buy the resistor?
Should be easier on an 05. Just make sure you dont get a modified 05-06 tail light that fits an 07-08.
My friend has an 05, it's very similar but you wont have any problems with fitment.
Not sure, plenty enough for the exhaust to be running for 1 hour or so in stop go traffic. Doesnt get any hotter than that, especially here in florida.
No one else has complained about melting issues in the forums either. The dealer most likely wants to install their own "mod" on your bike and charge you for it.
I've had this setup for a little longer then this video has been up. roughly 5000 miles or so.
resistors how many watts or ohm?
search google for Clear Alternatives tail light for 07 600rr or go to tripageled website. cannot link directly
this is very noob, but are you just modding the stock tail lights? or are you installing a different tail light. Because if you simply modding the stock, im doin it asap!
tripage doesnt actually make the light, his light is the CA (clear alternatives) light. Just shaved a little more to fit better.
dude worst fit ever like you said! but at the end of it all they do look stock only thing i noticed was the back seat didnt sit as flush did you have this problem?
I am not sure
how much did you pay for tail light???
can i get a link send to me please. need help.
i want buy ! what website?
right back at you
from the united states
just buy a new flasher relay, dont mess with the resistors, they suck.
Installing a new relay is easy, plug n play. I did it in the proton installation.
Bought 03-06 cbr600rr integrated tailligt from ebay doesn't fit my 07 cbr600rr
josh w is it the Kratos ones on amazon? I have an 07 cbr600rr and I was wondering if it would fit on my 07. www.amazon.com/gp/aw/d/B0052O8DCG/ref=ox_sc_act_image_4?ie=UTF8&psc=1&smid=A18132C77AG5IR
can you send me high res pictures please!
no, it doesnt. Even with the heat shield removed.
you can remove it
The tail lights were already integrated and then he removed them to put on another thing I don't know the name of. I wanted to how how you install tall turn signals, not what ever the fuck he put on. Pls halp.
How to make yourself less visible to drivers with their head up their ass... use an integrated LED tail light. Just hope there isn't a car in front of you when someone hits you from behind.
600kawasakininja. There is something wrong man. dunno what but doesent sound right. get that fixed or it will rune or burn out your regulator rectifier. this goes for all you guys putting a lesser wattage aftermarket signals on any bike. especially replacing regular bulbs with smaller ones or LED s!
who ever told you that is grossly misinformed. Everyone I know of running this setup has never had their light melt. Even with the heat shield removed.