Great work on the sign and video. I liked how you described what you were doing. size of board used and font size would've been nice as your video made me want to make a sign for a gift. finding the right board/font sign combo was a tough choice haha. appreciate that you did say what type of font you used. thanks to you I made my 1st sign and it turned out great as the family loved it. thanks again for sharing your knowledge.
Great video. It really has stirred up alot of interest. Would you post the equipment (router, bits, etc,) that you used? Thanks & God Bless! Once again, Great work!
Wow! You are super duper awesome at wood carving. You have a very steady hand. CNC router is nothing in front of your palm routing job. I really liked your videos Do you mind posting the router bits used in this video?
Thanks. Which bits would you recommned to do projects like mashrabiya moroccan screens? They are lovely but do require the removal of all the material and should be able to cut straight angles, not just rounded shapes. I'll appreciate your suggestions.
I'll keep my eyes peeled for the sign if I am ever out that way. I used to go fishing alot out near Standish at the narrows bridge for bullhead and small mouth bass.
@@stevescustomcarving1175 thank you that's very good. I do have a small router and a couple of bits so when I get the chance I do want to do something of that nature and If I come across any problems that I think you might be able to help with then If it is ok I'll ask for advice many thanks and I'll share a picture or two
Enjoyed it very much, beautiful sign! Maybe some closer up shots so we can see when your describing how you carve, how its done. Other than that great job
Hi Keya, I started with a 60 Deg, 90 Deg V bits. I also started with a 'profile' bit, Whiteside SC55. You can use a round over or 45Deg bit for the edging. I still use these bits for most of my signs. I hope this helps. Let me know if you have any additional questions.
what kind of router bit did you use? I also have a DEWALT palm router with a small 4mm diameter router bit. But the result was not as nice. The font was also too difficult.
Amazing how videos you see about sign carving and you see Eric Rhoten's base plate, base plate modification, same equipment used IE Critter sprayer and procedure for making the sign. Tips and tricks. Yet no credit given.
SUPERB. Subbed. Question: Could I use my existing 1/8" shank Dremel bits, with a 1/4-1/8" adapter, to use with my DeWalt DWP 611 palm router? Thanks, in advance.
I have used 1/8" bits in my DWP611. I do not believe they were made for a Dremel. Be careful. You DO NOT want the bit to come out or break while using. That could be dangerous. Good Luck!
Hi, love the video. I'm looking for a belt sander for the first time. What are you using and what are the specs? My 5" orbital, even with 80 grit to remove black, isn't cutting it. Thanks, Greg in Nashville.
@@stevescustomcarving1175 Thank you for the feedback. I opted for a Dewalt disk sander. Holy cow. Used it the first time today and it melted that paint right off :)
1st, great video. At 10:00... can you tell me what you are using at your nonskid mat under the work while sanding? What did you use for your final spray sealer? Nice video
I do my design with PowerPoint. Then I print it and use carbon paper to transfer the image. I have begun to play with printing a reversed image on wax paper but it requires a lot more setup to work properly. Much faster though.
I use 3 different bits on this sign. White side Whiteside Engraving CNC Router Bit, 5/8" Point, 1/4" SH for the artwork and letters Whiteside Router Bits 1500 V-Groove Bit with 90-Degree 1/4-Inch Cutting Diameter and 1/8-Inch Point Length for the cloud around the letters Whiteside Router Bits 1540 V-Groove 60-Degree 1/4-Inch Cutting Diameter and 7/32-Inch Point Length for the inset letters.
I do my layout in PowerPoint. I then reverse everything and print onto freezer paper. This allows me to transfer the design onto the piece. From there, I free hand the carving.
Hi Rey, I started with a 60 Deg for the location letters, 90 Deg V bit for the cloud and cleanout. I also used a 'profile' bit, Whiteside SC55 for the outset letters. You can use a round over or 45Deg bit for the edging. I still use these bits for most of my signs. I hope this helps. Let me know if you have any additional questions.
Do you make these for people or are you just showing us how to make them please comment back I would love to have a sign like this really 2 sides so please comment back thank you very much for this video
That is a good suggestion. I will need to start doing that. Here is a link to the profile bit with a picture. makeawoodsign.com/products/profile-router-bit
Here is the one I use. www.amazon.com/Whiteside-Engraving-CNC-Router-Point/dp/B01LG5XYIW/ref=sr_1_26?dchild=1&keywords=whiteside+router+bits+sign+carving&qid=1629503213&s=hi&sr=1-26
NOTICE PLEASE: Here is a tip if you are just starting out like I am. All these guys make it look so easy, make it look like it is fingertip touch. Truth is HANG ON TO THAT SUCKER FOR DEAR LIFE!!! Or it will fly out of your hands! They do not look like it, but all these guys have a VERY firm grip on the router TRUST me. =) ALSO: When starting the router on the board, it is important to lay it into the wood at an angle, watch him closely. Nobody seems to tell you this and if you try to punch it straight down on the wood it will fly out of your hand also.
Excellent. short and sweet! Thank you.
Steve, this was an excellent video. I'm not sure why I have never seen this before today. Again this was an excellent video!
Awesome video and your expertise in explaining details as you work. Thank you.
Awesome job man. I'm so glad I got one of those bases on your recommendation!
I am so glad you like the base.
Great job and video. Thanks.
Super cool love the details ♥️
Very cool, its a beautiful sign.
Top job, Steve!
Thanks!!!
Excellent video sir. Thanks for sharing.
Awesome video!
This is just amazing, sir! I'm doing kids toys and gonna try your technic to make signs on the shields.
Excellent. I learned a lot here.
Nice job Steve
Well done mate, I like 👍 your style
Great work on the sign and video. I liked how you described what you were doing. size of board used and font size would've been nice as your video made me want to make a sign for a gift. finding the right board/font sign combo was a tough choice haha. appreciate that you did say what type of font you used. thanks to you I made my 1st sign and it turned out great as the family loved it.
thanks again for sharing your knowledge.
Excellent video and demonstration. Very easy to understand and the tips you give us make a big difference. Thanks for sharing your expertise and time.
My pleasure!
Nice job!
Looks great, cant wait to do one of my own :)
Thank you!
Excellent video, thank you very much for sharing
Thanks Travis. I do what I can. Haha.
Nice job, good looking sign, Eric & Dave should be proud of your work.
Thanks Bruce. I definitely owe a lot to those guys.
Beautiful work, you are very steady with the router. Compliments a regards from Palistam
Thank you!
Great video. It really has stirred up alot of interest. Would you post the equipment (router, bits, etc,) that you used? Thanks & God Bless! Once again, Great work!
This is good man! I really like it.
Thanks Man!
Damrong Yutikan, 8 Pier House, 3 Tide Close, Mitcham, Surrey, London CR4 2GN
Good video, great job
Thank you!
Beatiflul job.Amazing
Thank you!
Wow! You are super duper awesome at wood carving. You have a very steady hand. CNC router is nothing in front of your palm routing job. I really liked your videos
Do you mind posting the router bits used in this video?
great job Sir. Im in Ireland and cant seem to find the profile bit you use. would you have a link to where i can get one please?
Man youre good.
Nice job!!
Thank you Mike.
You mentioned using a sanding sanding sealer. Which one do you use, and do you apply it before you start carving out the letters?
I like this video..👍
Can I use a profile bit on a 1/4 trim router ?
Excellent job
Thank you very much!
Hi, great job. What type of paint do you use? I have tried painting and then varnishing and the black paint went bad. Thanks a lot!!
Really nice! Where do you get your artwork and letter stencil?
Thanks. Which bits would you recommned to do projects like mashrabiya moroccan screens? They are lovely but do require the removal of all the material and should be able to cut straight angles, not just rounded shapes. I'll appreciate your suggestions.
I'll keep my eyes peeled for the sign if I am ever out that way. I used to go fishing alot out near Standish at the narrows bridge for bullhead and small mouth bass.
Beautiful ❤️.Which wood you are using
Iv`e been looking for a similar scene for a sign. Where can I find that one?
What is the name of the drill?
Where can one buy?
Like from Belarus !!!👍👍👍🎈
Wow I really like that mate.
You make it look so easy and I think that I could do it as well 👍👍👏👏👏
Thanks Philip. You can definitely learn to do this. All you need is a small router and a couple of bits. Let me know if you have any questions.
@@stevescustomcarving1175 thank you that's very good.
I do have a small router and a couple of bits so when I get the chance I do want to do something of that nature and If I come across any problems that I think you might be able to help with then If it is ok I'll ask for advice many thanks and I'll share a picture or two
What route bits did you use.
what model router are you using and where do you get the two bits you used?
Hi I like your video did you freehand the camper and pine tree before you carved it. And are you still making signs today
Enjoyed it very much, beautiful sign! Maybe some closer up shots so we can see when your describing how you carve, how its done. Other than that great job
Thanks Brian! I really appreciate the feedback.
Oh ihhhh
what font did you use on the Standish NY
Just found this. Its like watching a Dave Rhoten video. Identical patterns, Font, procedures and finishes. I had to double check the channel name.
That is funny. I got started by watching Dave and Eric's videos.
@@stevescustomcarving1175 Me too! Eric and Ryan are doing a fine job keeping the tradition of Dave's work!
Thank you for the video. What bits do you use? I want to try to make a sign but not sure what bits to get or where to get them. Thank you
Hi Keya, I started with a 60 Deg, 90 Deg V bits. I also started with a 'profile' bit, Whiteside SC55. You can use a round over or 45Deg bit for the edging. I still use these bits for most of my signs. I hope this helps. Let me know if you have any additional questions.
Hi Steve, that is so beautiful and you make it look so easy. What is in the spray can at the very end?
Where did you get the motorhome and the trees from to trace?
Nice work there can I find the pictures to carve thanks
Which tool is that desalt you are carving the letters with ?
hello dude, what name this tools machine driller ?
Good job Steve. If you get primer on your shirt you can turn it right side out. :)
Haha. I didn’t realize it was inside out until I was done filming. Oh well. 😂
How much would you charge for a paper print of your camper from this sign. Its the nicest one I've seen.
what kind of router bit did you use? I also have a DEWALT palm router with a small 4mm diameter router bit. But the result was not as nice. The font was also too difficult.
Amazing how videos you see about sign carving and you see Eric Rhoten's base plate, base plate modification, same equipment used IE Critter sprayer and procedure for making the sign. Tips and tricks. Yet no credit given.
SUPERB. Subbed.
Question: Could I use my existing 1/8" shank Dremel bits, with a 1/4-1/8" adapter, to use with my DeWalt DWP 611 palm router?
Thanks, in advance.
I have used 1/8" bits in my DWP611. I do not believe they were made for a Dremel. Be careful. You DO NOT want the bit to come out or break while using. That could be dangerous. Good Luck!
Hi, love the video. I'm looking for a belt sander for the first time. What are you using and what are the specs? My 5" orbital, even with 80 grit to remove black, isn't cutting it. Thanks, Greg in Nashville.
Thanks Greg. Much appreciated. I use a Skill 3x18" belt sander. Nothing special or expensive. Haha!
@@stevescustomcarving1175 Thank you for the feedback. I opted for a Dewalt disk sander. Holy cow. Used it the first time today and it melted that paint right off :)
1st, great video. At 10:00... can you tell me what you are using at your nonskid mat under the work while sanding? What did you use for your final spray sealer? Nice video
Thanks Dee Cee. That is just utensil drawer liner. Nothing fancy. I think I got it at Lowes.
how do you print it on the wood ...and space them properly?
I do my design with PowerPoint. Then I print it and use carbon paper to transfer the image. I have begun to play with printing a reversed image on wax paper but it requires a lot more setup to work properly. Much faster though.
Awesome Steve! Try epoxy next time, it will add more.....
NICE EXPLANATION! PRESS ON.
Steve-what is the router base that you are using?
That is the stock base for the 611. I cut a second hole in it to allow me to see with the dust collector mounted.
@@steveschrecengost6021 no it’s not! It’s a custom from Dave Rhoten from Makewoodsign.com
It’s a custom from Dave Rhoten from Makewoodsign.com
Hi steve.. what kind of bit did you used? Thanks
I use 3 different bits on this sign.
White side Whiteside Engraving CNC Router Bit, 5/8" Point, 1/4" SH for the artwork and letters
Whiteside Router Bits 1500 V-Groove Bit with 90-Degree 1/4-Inch Cutting Diameter and 1/8-Inch Point Length for the cloud around the letters
Whiteside Router Bits 1540 V-Groove 60-Degree 1/4-Inch Cutting Diameter and 7/32-Inch Point Length for the inset letters.
Did you use a template for the drawings or freehand it?
I do my layout in PowerPoint. I then reverse everything and print onto freezer paper. This allows me to transfer the design onto the piece. From there, I free hand the carving.
@@stevescustomcarving1175
Thank you sir. I appreciate the information.
What size bit did you use in the drill press?
Thanks for watching. I use a 2" hole saw for the corners.
I'm interested in trying this. Never used a router! What's a profile bit?
This is a detail bit used in sign carving. I use the Whiteside SC50. I would recommend a small router like the Dewalt DP611.
That came out absolutely gorgeous do you make them for other people please let me know thank you very much comment back thank you for this video
Yes, I do a lot of custom work for others. Thanks for watching!
@@stevescustomcarving1175 What do you charge can you tell me that thank you
Hi what kind of tip did u use for carving
Hi Rey, I started with a 60 Deg for the location letters, 90 Deg V bit for the cloud and cleanout. I also used a 'profile' bit, Whiteside SC55 for the outset letters. You can use a round over or 45Deg bit for the edging. I still use these bits for most of my signs. I hope this helps. Let me know if you have any additional questions.
Do you make these for people or are you just showing us how to make them please comment back I would love to have a sign like this really 2 sides so please comment back thank you very much for this video
Why don’t you show a close up of profile bit?
That is a good suggestion. I will need to start doing that. Here is a link to the profile bit with a picture. makeawoodsign.com/products/profile-router-bit
Awesome 👍 Do u have a link to your profile bit? Tq
Here is the one I use. www.amazon.com/Whiteside-Engraving-CNC-Router-Point/dp/B01LG5XYIW/ref=sr_1_26?dchild=1&keywords=whiteside+router+bits+sign+carving&qid=1629503213&s=hi&sr=1-26
Who needs a CNC well done
What do you charge for a sign like that
This is a 8x24" sign. My costs depend on the size and complexity. For this one the price would be $80 with shipping.
Shirt is apple green
NOTICE PLEASE: Here is a tip if you are just starting out like I am. All these guys make it look so easy, make it look like it is fingertip touch. Truth is HANG ON TO THAT SUCKER FOR DEAR LIFE!!! Or it will fly out of your hands! They do not look like it, but all these guys have a VERY firm grip on the router TRUST me. =) ALSO: When starting the router on the board, it is important to lay it into the wood at an angle, watch him closely. Nobody seems to tell you this and if you try to punch it straight down on the wood it will fly out of your hand also.
Ehm ... is just me or his green T-shirt is upside down ( label behind his neck)? 👀 . But nevertheless amazing video !! Good job .
what router and plate
The router is a Dewalt DWP611 and the base plate is from makeawoodsign website
You could just run the sign through a planer and let it take a 1/16th off and forget all that sanding
I have tried that. The problem is with fine details in the carving. They often chip out.
I did it too. This is what I used woodglut designs for
Hello are you still sign carving ?
Yes I am.
@@stevescustomcarving1175 thanks Steve may I ask hiw do you get your images for your signs there great
@@davidsandoval2846 I use my cell phone. Pretty low tech.
Try to do it with Stodoys plans :)
Shirt is wrong side out. :)
Dang, you beat me to it! lol
His woodworking skills make up for his fashion skills
musics annoying