How to Assemble Door Panels
Вставка
- Опубліковано 15 кві 2013
- Replacement door panels often require reusing the original door panel's metal understructure. Here is Jefferson Bryant from Red Dirt Rodz to show you do assemble this style of reproduction panel on a 1969 Chevy Malibu. Parts supplied by Original Parts Group
- Авто та транспорт
Can you send me a link for window felt install video ? Many thanks,
VERY HELPFUL VIDEO THANKS!
Great Video. I am restoring my door panels on my 68 Camaro. I been holding off trying to think how to do it. I thought I needed to do it in that manner. Glad to see a video that conformed the procedure. Thanks for the tip on the upholstery glue. .
Awesome video, thanks. I'm making one from scratch but have to reuse the metal. Thanks
Good video guys!
Great video, I am about to tackle my 68 Camaro panels this weekend.
What about the fuzzies you pulled off ? Doesn't the new panel require something for the window to rub up against.
Yes, the window felts need to be replaced, but we did that as a separate project.
Very helpful video! I was curious about how the job was done after getting a quote from an upholstery shop.
What's the name of the cement
DAP Products Weldwood Landau Top & Trim HHR Solvent Type Spray Grade Contact Adhesive
Is there anyway that you can do this same thing to the 1973/74 chevy nova abs door panels ?
If you need to restore that type of panel, you might want to check out this article on our website for Street Tech Magazine. streettechmag.com/2015/11/24/busted-how-to-fix-broken-plastic-trim/
What size an where can I purchase the rivets and washers? Also what's the brand of the contact cement? Thanks for the video, it was very informative
The rivets are 1/8"diameter x 1/4" or 3/16" long, depending on your panels. I have found that if you a body hammer and a dolly, you can get even better results. The cement is Weldwood, and can be found online or at any upholstery supply house.
Use a cut off wheel to cut those staples from the back , and the felt will just pull off
You never said anything about how to reinstall the new weather stripping you took off the door skin.
Its best to do that glueing outside, even using the heat gun on vinyl. outside.
so what do you do if you don't have the door panel?
If you mean the top cap, you can buy plastic ones, they are not nice, but it works. Another option ebay, you can find a set there, often as part of an old complete panel that needs restored.
@@jeffersonbryant764 where can you find them? I have searched all over and can't find any
@@marvingreen6644 what vehicle year make and model?
@@jeffersonbryant764 1977 nova
2 door coupe
So is there a logical reason you had the top steel piece backwards to lay out the drilled holes ? The curved part goes away from the upholstered side. Just scratching my head here...
We used the opposing side upper to mark the holes. Probably not the most efficient way of illustrating this process, I can certainly see where that could create some confusion.
Too bad you didn't show how to reinstall the fuzzy/weatherstripping!!
We can look into that and see about posting a video for you. Thanks for the feedback!
The most difficult part of this job is working with the two layers of vinyl over the steel panel top. How did you make that work so it stays where it's supposed to and looks good? You blew right over that. You started to show it...then went right to the second layer. Disappointing...