I HAVE LISTED THE E-BIKE FOR SALE NOW ON EBAY: rover.ebay.com/rover/1/710-53481-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=234036766134&ipn=psmain&icep_vectorid=229508&kwid=902099&mtid=824&kw=lg&toolid=11111
I have the 1000w on my carrera fury, 55v 13ah 30amp, it's amazing, i don't need any faster as it takes forever to stop a bike going over 30mph even with hydraulic discs, not enough mass like a moped and springy comfort 😅 but i like to keep a low profile and the cops don't bother nobody unless you're on a Suron type going 50
Hey! sorry that i write a comment fouryears later, but do you think that the build was worth it? because im looking forward in making one too.Do you think that i should stay in 48v for starter or go higher?
Yes they are hydraulic e-bike brakes that I when I bought the kit they did come with them. They do come with the motor cut out sensor feature, however as I know that this would br ineffective for the purposes of doing wheelies I never plugged the sensor wires into the motor and left them disconnected
I have a custom built E-Bike at home aswel that needs to be assembled. The power is close to yours, it’s a 1000W, 48V powerhouse so I am told. Mine is also in red in a expensive coat of canned paint, (I gave it the good stuff) but she needs a battery pack which I am lacking the pocket money for. It’s a very light and simple bike but when she is done she won’t have any brakes 😂 so I also need to get that in order aswel.
You just ride the brakes or what ? On my aventon level I have a rear brake sensor so motor shuts off when I hit brakes thankfully aventon made it so they unplug right there I go through pads big time once a week
So could I do this with a 20inch 1500watt kit for BMX bike 🚲 and 48v 20ah battery lol 😂sounds crazy but I'm wondering how fast it would go and also if they make back racks for BMX bikes like they do mountain bikes
I just fitted a Violamart 48v 1500w rear hub kit to my 26inch Giant Mountain bike. It has Hayes Hydraulis brakes, but when I try wheeling it 9 times out of 10 I flip it and that is with covering the bake brake. I have not connected the blue reduction wire which limits it to 750w. I find there is a bit of a lag in the throttle and then the power comes on way too quick. You say yours is programmed for efficiency have you limited yours to 750w or are those. wheelies at the full 1500w Nice work on the wheelies, impressive.
Hi, sounds good yeah mine is 1500w I’m using the full power the motor gives me in which being the full 1500w. YES DEFINITELY there is lag with majority of e-bike controllers and at least 25% of the begging throttle doesn’t respond what I recommend is going at a slow or moderate speed first with peddling and then lift the bike up and use a bit more throttle. Do not keep closing and opening the throttle as the controller doesn’t respond well to this and it’s not a motorbike so keep the throttle at one point this should help as this is how I wheelie. Subscribe and stay tuned as I’m going to be making an E-bike wheelie tutorial real soon. Thank you.
sweet ride, i never could do freaking wheelies, and i am not going to try now with all my crap on the bike. i have 3kwh of lipo on there on top of it all
A lot of kits come with a plastic spacers on the hub remove that and it should clear, if not try washers before the drop but be careful not to clamp the cassette
Oh and before you let the bike front tire hit the ground hit the back brake so it doesn't wear your shocks out as much and just feather the back brake while you are doing the wheelie
Yo u gotta b the only guy on utube wheelying a 1500w conversion kit successfully any tips? Like what gear r u in and have u made any changes to your throttle? As my throttle is so touchy it makes it impossible to hold balance, i can wheelie a normal bike no worries but this is a howl other thing.
There is a man who tells you how to change the settings on your screen with these settings you can change your throtle how accurate you want it just type in youtube ebike screen tips i will post soon some banger whielie videos with my 1500w 48v
@@blegend6538 yeah i know who ur talking about augustine bikes channel, i have tuned some settings on my sw900 but its seems all my power is only in the first qtr twist of throttle u can keep twisting it further but it doesn't change where the actual torq/power is. I dont use peddle assist as its just dangerous and i dont use cut off brakes so I can feather the rear brake when wheeling, ill keep practicing, would b sick to see your vids at it show us how its done.
Hi there no I do not use the motor cut off sensor for the braking as this interrupts the action/flow of wheeling as you need the brake and the throttle to work simultaneously.
@@rshproductions2178 It looks like your levers have motor cut off switches. Are they just not plugged in then. I have the same kit I believe and was trying to decide if I should use the levers that came with the kit and your answer above makes me realize that you make a good point that there are times that you may not want the light use of the brakes to interrupt a controlled current flow to the motor. Did you ever try the PAS sensor that mounts near the cranks for pedal assist or are you strictly relying on throttle for motor control? Awesome Wheelies!
@@rshproductions2178 i whas lookin for this comment from you If you use no sensor to cut of the moter is this damage your moter do you still ride with no problems inside your moter?
Hey which mode do you wheelie on, did you make any modifications to get more torque out of your motor? I have a 52v 1000watt ebike doesn’t have enough torque to keep the wheel up
Hi there it goes 30mph without pedalling, with pedalling it goes 35mph. The motor probably could produce more speed, however my one is built with efficiency rather than performance that’s why you don’t hear the motor at all as the controller is inbuilt and everything is programmed you can change settings though via the LCD.
@@rshproductions2178 you convince me into making mine more powerful I only have a 500 watt no 350 more the only it only goes 20 mph I want to go at least 31 like the 1500 watt cool wheelies dude good job
@@rshproductions2178 one question does the LCD allow it to go faster than 31 mph when I pedal mine it's like I don't even get no speed it's like I'm pedaling air maybe I'm doing something wrong but the first question is what I'm interested in if you could answer me that
It went together easily in less than an hour. ua-cam.com/users/postUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Make sure the front fork is forward or the pedals will hit the front tire. Tires are both a little soft so it needs air before I ride it. The rear wheel didn't come with a clamp regular bolts hold it on. The front had the clamp. No scratches out of box. Rims are a little off with a slight wobble. They could have spent more time with the spoke tool fixing the run out. So far out of the box I'm happy with it. I did replace the pedals with a nice aftermarket set. After riding it a bit my A$$ is a bit sore so I ordered another seat. Overall I'm nearly 60 and didn't ride a bike in 30 years. I like my new 29" Schwinn. It will be used for casual rides with my friend.
Hi there yes most likely you will have to as the kit I bought everything was included with it such as the motor, controller which is inbuilt within the motor, LCD, throttle, e-bike brake levers excluding the battery, however you possibly can find e-bike kits on the market that offer battery within the kit just search on eBay as I am sure I’ve seen them on there before.
You can get a 1500 watt conversion kit that's what he has they have front wheel or back wheel on eBay then you just get the battery you can use a thousand watt battery but it has to be 48 volts if the kit is 48 volts
I am using a 48v 20ah battery gives me up to 30 miles of distance of ridding on a single charge when ridden efficiently less throttle and lots of pedalling, however does around 20 - 25 miles of distance of riding on average.
@@rshproductions2178 can u put a link up for the kit and battery please mate im looking to make 1 asap fuckers having my licence from me next week and the suron ebikes that i want are biggggg money 4500 😬😬 just got the carrera vengance and need a kit asap bro
Hi there it is not an off-road built or used bike it’s a road bike hence the smooth tyres, however off-road with off-road fitted tyres you would get the same top speed as on any other terrain type in which being 30mph. I get up to 20-30miles distance of riding on a single charge when ridden efficiently with a balanced amount of throttle and peddling. If ridden like a motorcycle with pure constant high amounts of throttle at all times with little or no peddling then you will not be able to achieve as much mileage and will probably do a distance of 15-20miles of ridding.
The trouble with those external bms wheels is the shit looking rats nest of wiring, the ugly bms somehow attached to the frame and the lack of cable disconnect for removing the wheel for a puncture repair, i have a 27.5" 1500 watt rear (48 volt battery) with built in bms and it has a metal type waterproof cable disconnect, It's way better and the bike looks stunning, I constantly get compliments from both car drivers and pedestrians, mostly WOW that's a nice bike.
Bro you can use bullet connectors instead of that shitty yellow block they give in them kits. i use 4mm bullet connectors so i can remove rear wheel without fucking about.
Why do you leave those stupid straight steering placks it was never meant for street riding. Just throw it out and put normal bent one you will feel much better.
Dirtbike and supermoto handlebars are long the long handle bars give me lots of handling and control they are comfortable. Why are you saying that? Have you tried long handle bars such as mine before especially for wheeling?
@@rshproductions2178 i am talking just for road riding. I am just annoyed that every manufacturer puts these straight planks when nobody uses them other than road riding (and consequently all my bikes have thise and no free way to get comfortable ones) . Straight handlebars are not for roadriding nor dirt tires are yet i see them on every bike - stupidity of mainstream
Congratulations you now have your first motorcycle, no insurance ,no helmet, no registration plate and you put it on you tube for plod to see, (o yes can’t ride it in park ,cycle ,path pavement ) l o l 🤣
nice wheelies, but can u do it on a real bike doing bout 80mph in first shifting to second and third and on up, yea that used to be my crazy azz in my younger days, i will try this once it's built. if you build it they will come
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
I HAVE LISTED THE E-BIKE FOR SALE NOW ON EBAY: rover.ebay.com/rover/1/710-53481-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=234036766134&ipn=psmain&icep_vectorid=229508&kwid=902099&mtid=824&kw=lg&toolid=11111
That red on red looks dope. Those wheelies are sweet too.
If only they had them in 27.5”
Eat them 😂😋
@@datguy3201 yes at mafiabikes
In my opinion these are the BEST, get a good mountain bike and put a kit on it, best FUN for the money EVER
@ it’s a figure of speech dude like “bang for your buck” get out from under your rock 🪨
Yes exactly and you learn a ton while getting into it. I might start my own E- Bike side hustle.
I like it! Congratulations dude
I have the 1000w on my carrera fury, 55v 13ah 30amp, it's amazing, i don't need any faster as it takes forever to stop a bike going over 30mph even with hydraulic discs, not enough mass like a moped and springy comfort 😅 but i like to keep a low profile and the cops don't bother nobody unless you're on a Suron type going 50
Can you wheelie with 1000w hub motor because iam thinking of buying one?
@@flewunt5673 So easily, i can still pull a decent wheelie "100 yards" and I'm over a HALF CENTURY OLD 🧓 😂of course make sure it's a REAR MOTOR
@@ianmangham4570 Ok , 😄 cool, thank you
My 1500w 52v does 40 mph you don't need a su ron too get stopped most of these builds go faster than a stock su ron
@@JuanMartinez-hy6yf Fuzzy wuzzy was a woman!
Good job you got that thing look sweet💯👍👍😁
Cool, im soon to be building a voilamart 1500w 48v with 52v 20ah battery, id love to wheelie it like you do, thats cool AF!!
how is that going, have you built it yet, i am planing on going with the same combo
You're red bike is awesome and you got mad skills 👍
Nice build dude!!
I made one its great fun and good torque from the 1500w motor
Hey! sorry that i write a comment fouryears later, but do you think that the build was worth it? because im looking forward in making one too.Do you think that i should stay in 48v for starter or go higher?
How you have hydraulics brakes with sensor? You buy appart from de kit?
Yes they are hydraulic e-bike brakes that I when I bought the kit they did come with them. They do come with the motor cut out sensor feature, however as I know that this would br ineffective for the purposes of doing wheelies I never plugged the sensor wires into the motor and left them disconnected
How do u stop the motor without the cut off?
That bike is so clean
Sick build
I have a custom built E-Bike at home aswel that needs to be assembled.
The power is close to yours, it’s a 1000W, 48V powerhouse so I am told.
Mine is also in red in a expensive coat of canned paint, (I gave it the good stuff) but she needs a battery pack which I am lacking the pocket money for.
It’s a very light and simple bike but when she is done she won’t have any brakes 😂 so I also need to get that in order aswel.
I was sold to the 1000 watt motor now I'm going 1500 wstts afert watching this video that bike is fast
The motors are typically infinite wattage until it burns up. Its the controller and battery output that makes the difference
@@joseureste8257 smart. Adding to that, you don't want to have any business with such motors rated below 1000watts
Is it a thumb throttle or a full rev
Can u please make a video on how to install the sw900 system
How do u wheelie conversion kit bikes
Awesome, brother.
You just ride the brakes or what ? On my aventon level I have a rear brake sensor so motor shuts off when I hit brakes thankfully aventon made it so they unplug right there I go through pads big time once a week
How did u get around the break switches on the hydraulic breaks ?
Who needs brake switches 😜?
A nice build, are you actually going to ride it on trails etc…
wtf, Brockwell park lol! IM currenty building my first bike and randomly came accross this video. I live in Brixton hahah
nice im putting a 46v 13ah battery andd 46v 1000w motor and 26A controller on my trek marling 6
Well done
I had a kit like this but couldn't ever get the wheel very high. I can wheelie my motorcycle. Wonder what I was doing wrong on the ebike
Are those "tanus tires " ? per chance ? If so how did you do it ? Those are usually fatter
Please let me know how long take for full charge and each charge how many miles goes and also how is speed
So could I do this with a 20inch 1500watt kit for BMX bike 🚲 and 48v 20ah battery lol 😂sounds crazy but I'm wondering how fast it would go and also if they make back racks for BMX bikes like they do mountain bikes
If you're under 180 lbs you could possibly hit 35-40 mph
where did you get the rain mud gaurd for your frame
I just fitted a Violamart 48v 1500w rear hub kit to my 26inch Giant Mountain bike. It has Hayes Hydraulis brakes, but when I try wheeling it 9 times out of 10 I flip it and that is with covering the bake brake. I have not connected the blue reduction wire which limits it to 750w. I find there is a bit of a lag in the throttle and then the power comes on way too quick. You say yours is programmed for efficiency have you limited yours to 750w or are those. wheelies at the full 1500w Nice work on the wheelies, impressive.
Hi, sounds good yeah mine is 1500w I’m using the full power the motor gives me in which being the full 1500w. YES DEFINITELY there is lag with majority of e-bike controllers and at least 25% of the begging throttle doesn’t respond what I recommend is going at a slow or moderate speed first with peddling and then lift the bike up and use a bit more throttle. Do not keep closing and opening the throttle as the controller doesn’t respond well to this and it’s not a motorbike so keep the throttle at one point this should help as this is how I wheelie. Subscribe and stay tuned as I’m going to be making an E-bike wheelie tutorial real soon. Thank you.
@@rshproductions2178 ok thanks I will
Nice bike questions tho hod long does it last
What amp is it battery
sweet ride, i never could do freaking wheelies, and i am not going to try now with all my crap on the bike. i have 3kwh of lipo on there on top of it all
R u using your back brake ???????
how fast did u go
What’s the range lookin like
How did you get around the disc brake clearance issues on the rear wheel? What brake caliper did you use and what size rotor?
If ur discs r rubbing on the motor buy rotor spacers
A lot of kits come with a plastic spacers on the hub remove that and it should clear, if not try washers before the drop but be careful not to clamp the cassette
What are the parts you used for this build
I know for a FACT the the motor he’s using is a VoilaMart 48v 750-1500w motor, you can buy that specific motor off of Amazon for around $260
Oh and before you let the bike front tire hit the ground hit the back brake so it doesn't wear your shocks out as much and just feather the back brake while you are doing the wheelie
Yo u gotta b the only guy on utube wheelying a 1500w conversion kit successfully any tips? Like what gear r u in and have u made any changes to your throttle? As my throttle is so touchy it makes it impossible to hold balance, i can wheelie a normal bike no worries but this is a howl other thing.
There is a man who tells you how to change the settings on your screen with these settings you can change your throtle how accurate you want it just type in youtube ebike screen tips i will post soon some banger whielie videos with my 1500w 48v
@@blegend6538 yeah i know who ur talking about augustine bikes channel, i have tuned some settings on my sw900 but its seems all my power is only in the first qtr twist of throttle u can keep twisting it further but it doesn't change where the actual torq/power is. I dont use peddle assist as its just dangerous and i dont use cut off brakes so I can feather the rear brake when wheeling, ill keep practicing, would b sick to see your vids at it show us how its done.
@@verofpv6152 subscribe bro i will explain everything in the video
What bike frame is that you got
do your brakes use the motor cut off? or no motor cut off?
Hi there no I do not use the motor cut off sensor for the braking as this interrupts the action/flow of wheeling as you need the brake and the throttle to work simultaneously.
@@rshproductions2178 awesome, thank you!
@@rshproductions2178 It looks like your levers have motor cut off switches. Are they just not plugged in then. I have the same kit I believe and was trying to decide if I should use the levers that came with the kit and your answer above makes me realize that you make a good point that there are times that you may not want the light use of the brakes to interrupt a controlled current flow to the motor.
Did you ever try the PAS sensor that mounts near the cranks for pedal assist or are you strictly relying on throttle for motor control?
Awesome Wheelies!
@@rshproductions2178 i whas lookin for this comment from you
If you use no sensor to cut of the moter is this damage your moter do you still ride with no problems inside your moter?
Hey which mode do you wheelie on, did you make any modifications to get more torque out of your motor? I have a 52v 1000watt ebike doesn’t have enough torque to keep the wheel up
Maybe switch your gear to get it up and why did you get a 1000w with a 52😂 52v should be like 1600w
Locks realy cool . How fast is IT ?
23 MPH
Hi there it goes 30mph without pedalling, with pedalling it goes 35mph. The motor probably could produce more speed, however my one is built with efficiency rather than performance that’s why you don’t hear the motor at all as the controller is inbuilt and everything is programmed you can change settings though via the LCD.
@@rshproductions2178 you convince me into making mine more powerful I only have a 500 watt no 350 more the only it only goes 20 mph I want to go at least 31 like the 1500 watt cool wheelies dude good job
@@rshproductions2178 one question does the LCD allow it to go faster than 31 mph when I pedal mine it's like I don't even get no speed it's like I'm pedaling air maybe I'm doing something wrong but the first question is what I'm interested in if you could answer me that
@@sanesaint8725 I love it when youtubers dont reply to there comments hahaha
I love the bike it’s dust the brake cable manned
dope build bro. what kit is that? and could you recommend somewhere i can buy those tyres?
the wheel got voilamart logo. maybe the voilamart kit
what is the top speed?
It went together easily in less than an hour. ua-cam.com/users/postUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Make sure the front fork is forward or the pedals will hit the front tire. Tires are both a little soft so it needs air before I ride it. The rear wheel didn't come with a clamp regular bolts hold it on. The front had the clamp. No scratches out of box. Rims are a little off with a slight wobble. They could have spent more time with the spoke tool fixing the run out. So far out of the box I'm happy with it. I did replace the pedals with a nice aftermarket set. After riding it a bit my A$$ is a bit sore so I ordered another seat. Overall I'm nearly 60 and didn't ride a bike in 30 years. I like my new 29" Schwinn. It will be used for casual rides with my friend.
sheiiiit video
Cool
hey can you send me a link of the kit
Yes I will
www.ebay.co.uk/itm/224126213332
@@rshproductions2178 do you need to buy a battery separately?
Hi there yes most likely you will have to as the kit I bought everything was included with it such as the motor, controller which is inbuilt within the motor, LCD, throttle, e-bike brake levers excluding the battery, however you possibly can find e-bike kits on the market that offer battery within the kit just search on eBay as I am sure I’ve seen them on there before.
Which engine do you have? And what controller do you use?
You can get a 1500 watt conversion kit that's what he has they have front wheel or back wheel on eBay then you just get the battery you can use a thousand watt battery but it has to be 48 volts if the kit is 48 volts
Get a kit that says LCD included that shows your speed and that is on your controls on your handlebars
why isnt anybody talking about the gun shots
what battery are you using mate
I am using a 48v 20ah battery gives me up to 30 miles of distance of ridding on a single charge when ridden efficiently less throttle and lots of pedalling, however does around 20 - 25 miles of distance of riding on average.
@@rshproductions2178 can u put a link up for the kit and battery please mate im looking to make 1 asap fuckers having my licence from me next week and the suron ebikes that i want are biggggg money 4500 😬😬 just got the carrera vengance and need a kit asap bro
Ok I will
www.ebay.co.uk/itm/224126213332 that’s the link to the motor
@@rshproductions2178 do you know what kinda speeds and miles id get with a 1000w motor and 48v 12a battery ?
That's what I'm going to do but not with that kind of see I have a nice soft seat
top speed?
Whats the offroad top speed on that mate ?
What range you get if you don't drive round like a hoodlum ?
Hi there it is not an off-road built or used bike it’s a road bike hence the smooth tyres, however off-road with off-road fitted tyres you would get the same top speed as on any other terrain type in which being 30mph.
I get up to 20-30miles distance of riding on a single charge when ridden efficiently with a balanced amount of throttle and peddling. If ridden like a motorcycle with pure constant high amounts of throttle at all times with little or no peddling then you will not be able to achieve as much mileage and will probably do a distance of 15-20miles of ridding.
how many miles on one charge?
It depends on the battery amps but you usually get about 30 MI
The trouble with those external bms wheels is the shit looking rats nest of wiring, the ugly bms somehow attached to the frame and the lack of cable disconnect for removing the wheel for a puncture repair, i have a 27.5" 1500 watt rear (48 volt battery) with built in bms and it has a metal type waterproof cable disconnect, It's way better and the bike looks stunning, I constantly get compliments from both car drivers and pedestrians, mostly WOW that's a nice bike.
Bro you can use bullet connectors instead of that shitty yellow block they give in them kits. i use 4mm bullet connectors so i can remove rear wheel without fucking about.
2:14 mission passed
I WANT THIS E BIKE KIT
Google it they have conversion kids that fit on bicycles on eBay
🔥
Lol he's probably still going up and down his street trying to pick up chips
You need to try the 62 or the 72v battery its a all new world of power
Why do you leave those stupid straight steering placks it was never meant for street riding. Just throw it out and put normal bent one you will feel much better.
What are you talking about?
@@rshproductions2178 straigt steering wheel is not comfortable try motrocycle steering wheel unless you go jump the hills
Dirtbike and supermoto handlebars are long the long handle bars give me lots of handling and control they are comfortable. Why are you saying that? Have you tried long handle bars such as mine before especially for wheeling?
@@rshproductions2178 i am talking just for road riding. I am just annoyed that every manufacturer puts these straight planks when nobody uses them other than road riding (and consequently all my bikes have thise and no free way to get comfortable ones) . Straight handlebars are not for roadriding nor dirt tires are yet i see them on every bike - stupidity of mainstream
The bike is not from a manufacture it’s custom built by me and not a lot of manufacturers do it.
Smaller than it appeared in the photo
what is the max speed ???? wasted my time
Muito foda, tirou onda
?????
You have a video when you're actually riding it
Rippin lol
Ho2 fast
RED tyres LMAO
😷😅🤡
Congratulations you now have your first motorcycle, no insurance ,no helmet, no registration plate and you put it on you tube for plod to see, (o yes can’t ride it in park ,cycle ,path pavement ) l o l 🤣
Not very impressed
nice wheelies, but can u do it on a real bike doing bout 80mph in first shifting to second and third and on up, yea that used to be my crazy azz in my younger days, i will try this once it's built. if you build it they will come
Nice build dude!!