How thoughtful of the criminals to line up to make shooting them easier. If only the civilians would learn to stay out of the firing range for once. And we did see that Virtua Fighter 4 advert, SEGA. If my ears don't deceive me I think the "die" sound clip from the jetpack troopers is the same they used for Hanged Man in The House of the Dead. But hey, why not recycle parts of your hit games to make some things easier (and cheaper.)
If Virtual Cop gets a movie or TV adaption, it's will be Cyberpunk theme like Robocop, Terminator, Ghost In The Shell, Blade Runner, Altered Carbon, Demolition Man or The Matrix with mix of John Woo movies, Lethal Weapon, Dirty Harry, Bad Boys, Hunter or Miami Vice.
@@arronmunroe Thank you for all the codes you've provided! Now I can only hope that someone can make no gun flash codes for RE Dead Aim and Dino Stalker one day.
@@sirnovice9085 I probably could check them out sometime. So far, I haven't tried Dino Stalker, and I have only played Dead Aim with a regular controller.
I believe the game just runs slower for the Europe version, so I set the emulator to run at 60fps in PAL, which just speeds up the game a little in this case. The no interlace thing was just a code that I came up with. This should be the address I set to to 0, but I would need to check that again to be sure. 201919B8
@@Shawdh33n You really want to use it? Just so it's clear, you can use your regular Windows cursor to aim without having to use the in game crosshair. I only turned on the crosshair because this was 2 player, and I wouldn't have been able to see where I was aiming without it. If you really wanted to use it, you could put this into a .pnach cheat file to turn it on. //crosshair on patch=1,EE,20121C3C,extended,00000000 patch=1,EE,2010C840,extended,00000000 patch=1,EE,2010C950,extended,1000FE8F patch=1,EE,2010C624,extended,0C03FF23 patch=1,EE,2010C628,extended,00000000 patch=1,EE,200FFC8C,extended,82030059 patch=1,EE,200FFC90,extended,24020002 patch=1,EE,200FFC94,extended,86020062 patch=1,EE,200FFC98,extended,A6120030 patch=1,EE,200FFCA0,extended,A6110032 patch=1,EE,200FFCA4,extended,03E00008
When I checked Virtua Cop 3, the cpu requirements seemed pretty high. I can say for sure the game is possible to record, but I don't know at this point just how bad the slowdown would be. It's not something I can do for at least a few months, though. Only Silent Scope 2 on PS2 is multiplayer, but because it uses the iLink cable, it's not possible for me to play it like that. I had considered playing those games at some point in single player mode, but I would need some practice. Finally, Terminator Salvation is not playable on PC yet, but I'm sure that will be an option sooner or later.
Could you help me about using mouse to emulate lightgun on pcsx2? Starting with the plugins I need and how I have to set it up? Last time I tried it was back in 2013 and I utterly failed miserably and ended up using mouse to analogue emulation instead of mouse to lightgun and man mouse to analogue just sucks and is not ideal at all.
You need the nuvee plugin for using the lightgun with the mouse. i.imgur.com/nVBcPzu.png You'll need to set it as a plugin here. hico-srv004.pixhotel.fr/sites/default/files/styles/gamoovernet890px/public/gamoovernet/20141015183124-STF-2014-10-15-183055.jpg Config>USB is where you configure it (not what's highlighted in the picture). www.fantasyanime.com/emuhelp/images/pcsx2-speed-hacks.png For most games, it seems like I need to use port 2 to start the game as player 1 for some reason. You can set it to rawinput for mouse API, but I don't think that matters. i.imgur.com/Znmy118.png On this screen, set the alignment to whichever game you're playing. For this game, I use left click for shoot, right click for reload and middle button for start. You can use the WASD keys for directions in the menu. You may need to temporarily change reload or start to the B button in the menu. After the calibration screen, always make a save state so you can easily get back to the title screen after you close the emulator. You may need the mouse calibration hack box checked as you calibrate the gun, but always make sure it's unchecked during regular gameplay. I don't think I can say anymore for now, but if you run into any problems, let me know and I'll see if I can help you out.
@@arronmunroe Thanks a lot, I will give this a try. Currently playing the model 2 version, played the Dreamcast version too but mouse to lightgun emulation is bad on Demul, so I will try the ps2 port again.
@@arronmunroe Arcade aka SEGA Naomi version of House of Dead 2 auto reloads when you aim the gun out of screen. Pressing right click aims the gun outside of screen and thus HOD 2 arcade version is playable on demul. But for dreamcast games you need to shoot outside of the screen. That measn you have to hold right mouse button and then press left mouse button to reload. This cannot be changed at all. So dc ports of hod2 suffers from this issue. ^ Aside from that, the Dream cast port of Vcop2 also seems to suffer from freezes when I use lightgun and shoot. This doen's't happen when I just use keyboard as controller.
Holding the right mouse button and pressing the left button to reload is also a problem on a few arcade games, such as Lupin the Third and Death Crimson OX. The emulator Flycast, which is in Retroarch, also has Dreamcast support and I think lightgun support, but I haven't tried Virtua Cop 2 with it to see if it works.
The flash actually is normal, although I was able to remove it with a cheat. The crosshair also only shows up normally when you use a standard gamepad, but I also changed that with a cheat. Keep in mind you should still be able to see the regular mouse cursor to see where you're aiming.
@@thatoneguy5383 I do have it, but I'll try to get back to you soon with it. I have to double check, but I'm pretty sure I never got these particular cheats working as a .pnach file so I did it manually through the PCSX2 debugger. I'm pretty sure there is some simple thing I don't understand about how those files work. For a second mouse, it should be as simple as setting both ports to Guncon 2, and the API needs to be set to rawinput. There is a setting where you click to make it detect which mouse is for which port.
"I see my plan is ruined, but I can at least finish YOU!"
"HUH HUH HUH HUH HUH HUH HUH HUH"
*dies*
lol😂
How thoughtful of the criminals to line up to make shooting them easier. If only the civilians would learn to stay out of the firing range for once. And we did see that Virtua Fighter 4 advert, SEGA.
If my ears don't deceive me I think the "die" sound clip from the jetpack troopers is the same they used for Hanged Man in The House of the Dead. But hey, why not recycle parts of your hit games to make some things easier (and cheaper.)
@arronmunroe
in the video title you forgot the word 'PS2' it must be between 2 words "Edition" & "2" please edit it
14:49 saul Goodman?
Noice
Hell yea virtua cop!
昔にゲーセンであったガンシュー
If Virtual Cop gets a movie or TV adaption, it's will be Cyberpunk theme like Robocop, Terminator, Ghost In The Shell, Blade Runner, Altered Carbon, Demolition Man or The Matrix with mix of John Woo movies, Lethal Weapon, Dirty Harry, Bad Boys, Hunter or Miami Vice.
Waah Oh so very Nicely Superbly Duperbly Gameplay for virtua Cop for 2 Players
18:10 - ahh… a new power up called “GAME OVER”… because that’s what happens for the bad guy if the bad guy is shot. Or that’s a bug.
I think that was connected with what I did to get the crosshair showing up while using the lightgun. I didn't know how to fix that.
Can you please share the no gun flash code if you have it? I'm just setting up the few ps2 light gun games I have left. Thanks.
//no flash
patch=1,EE,2010C638,extended,00000000
@@arronmunroe Thank you for all the codes you've provided! Now I can only hope that someone can make no gun flash codes for RE Dead Aim and Dino Stalker one day.
@@sirnovice9085 I probably could check them out sometime. So far, I haven't tried Dino Stalker, and I have only played Dead Aim with a regular controller.
How are you getting 60fps on Europe version ? I couldn't find a patch for it . It also looks de-interlaced here.
I believe the game just runs slower for the Europe version, so I set the emulator to run at 60fps in PAL, which just speeds up the game a little in this case. The no interlace thing was just a code that I came up with. This should be the address I set to to 0, but I would need to check that again to be sure. 201919B8
@@arronmunroe I need that emulator ;-;
@@Shawdh33n It's just PCSX2.
@@arronmunroe How do I set up the crosshair?
@@Shawdh33n You really want to use it? Just so it's clear, you can use your regular Windows cursor to aim without having to use the in game crosshair. I only turned on the crosshair because this was 2 player, and I wouldn't have been able to see where I was aiming without it. If you really wanted to use it, you could put this into a .pnach cheat file to turn it on.
//crosshair on
patch=1,EE,20121C3C,extended,00000000
patch=1,EE,2010C840,extended,00000000
patch=1,EE,2010C950,extended,1000FE8F
patch=1,EE,2010C624,extended,0C03FF23
patch=1,EE,2010C628,extended,00000000
patch=1,EE,200FFC8C,extended,82030059
patch=1,EE,200FFC90,extended,24020002
patch=1,EE,200FFC94,extended,86020062
patch=1,EE,200FFC98,extended,A6120030
patch=1,EE,200FFCA0,extended,A6110032
patch=1,EE,200FFCA4,extended,03E00008
Boss Fights crowd
This version looks pretty dope!
Do you think you guys can try playing Virtua Cop 3 and the Silent Scope games? Maybe also dabble in Terminator Salvation Arcade?
When I checked Virtua Cop 3, the cpu requirements seemed pretty high. I can say for sure the game is possible to record, but I don't know at this point just how bad the slowdown would be. It's not something I can do for at least a few months, though. Only Silent Scope 2 on PS2 is multiplayer, but because it uses the iLink cable, it's not possible for me to play it like that. I had considered playing those games at some point in single player mode, but I would need some practice. Finally, Terminator Salvation is not playable on PC yet, but I'm sure that will be an option sooner or later.
I was able to do Virtua Cop 3, although emulation still isn't great. As for those others, maybe someday.
U can play this titles with mouse?
All PS2 lightgun games can be played using a mouse.
@@arronmunroeokay Thx!
@@arronmunroe Via All PS2 consoles?
@@Nestalgba92023 Actually, that's only for lightgun games played on a PS2 emulator.
Nice shooting, son. What's your name?
Nick
Could you help me about using mouse to emulate lightgun on pcsx2?
Starting with the plugins I need and how I have to set it up? Last time I tried it was back in 2013 and I utterly failed miserably and ended up using mouse to analogue emulation instead of mouse to lightgun and man mouse to analogue just sucks and is not ideal at all.
You need the nuvee plugin for using the lightgun with the mouse. i.imgur.com/nVBcPzu.png
You'll need to set it as a plugin here.
hico-srv004.pixhotel.fr/sites/default/files/styles/gamoovernet890px/public/gamoovernet/20141015183124-STF-2014-10-15-183055.jpg
Config>USB is where you configure it (not what's highlighted in the picture). www.fantasyanime.com/emuhelp/images/pcsx2-speed-hacks.png
For most games, it seems like I need to use port 2 to start the game as player 1 for some reason. You can set it to rawinput for mouse API, but I don't think that matters. i.imgur.com/Znmy118.png
On this screen, set the alignment to whichever game you're playing. For this game, I use left click for shoot, right click for reload and middle button for start. You can use the WASD keys for directions in the menu. You may need to temporarily change reload or start to the B button in the menu. After the calibration screen, always make a save state so you can easily get back to the title screen after you close the emulator. You may need the mouse calibration hack box checked as you calibrate the gun, but always make sure it's unchecked during regular gameplay. I don't think I can say anymore for now, but if you run into any problems, let me know and I'll see if I can help you out.
@@arronmunroe Thanks a lot, I will give this a try.
Currently playing the model 2 version, played the Dreamcast version too but mouse to lightgun emulation is bad on Demul, so I will try the ps2 port again.
I haven't really messed around with the lightgun on Dreamcast games, but I never had a problem with lightgun emulation on arcade games using Demul.
@@arronmunroe Arcade aka SEGA Naomi version of House of Dead 2 auto reloads when you aim the gun out of screen.
Pressing right click aims the gun outside of screen and thus HOD 2 arcade version is playable on demul.
But for dreamcast games you need to shoot outside of the screen. That measn you have to hold right mouse button and then press left mouse button to reload. This cannot be changed at all. So dc ports of hod2 suffers from this issue.
^ Aside from that, the Dream cast port of Vcop2 also seems to suffer from freezes when I use lightgun and shoot. This doen's't happen when I just use keyboard as controller.
Holding the right mouse button and pressing the left button to reload is also a problem on a few arcade games, such as Lupin the Third and Death Crimson OX. The emulator Flycast, which is in Retroarch, also has Dreamcast support and I think lightgun support, but I haven't tried Virtua Cop 2 with it to see if it works.
Nostálgico :,)
Last time in 2020
I play Virtua Cop 2 in PC
And i got About 10 MILLIONS POINTS but...
I didnt record
(Can I just Beat TAS Most Points?)
I am just trying to download the elite version of the game for pc... but seems like there is none
can this game use guncon2
Yes
How u setup the crosshair?
i can´t see the crosshair and i have continuos flashlights on the screen every time i shoot
The flash actually is normal, although I was able to remove it with a cheat. The crosshair also only shows up normally when you use a standard gamepad, but I also changed that with a cheat. Keep in mind you should still be able to see the regular mouse cursor to see where you're aiming.
@@arronmunroe Do you remember the codes you used? I would like to use them since I can't find them at all. Also how do you setup a second mouse?
@@thatoneguy5383 I do have it, but I'll try to get back to you soon with it. I have to double check, but I'm pretty sure I never got these particular cheats working as a .pnach file so I did it manually through the PCSX2 debugger. I'm pretty sure there is some simple thing I don't understand about how those files work. For a second mouse, it should be as simple as setting both ports to Guncon 2, and the API needs to be set to rawinput. There is a setting where you click to make it detect which mouse is for which port.
@arronmunroe oh okay! Thanks!
They have cartoons sounds
James bond sfxs
virtua cop 3 never made for game console
Who even writes comments like these this kinda stuff doesnt feel like it was written by humans
😍😧😢😢
Hey arron
Hey
@@arronmunroe so hows your going on in your quarantine day?
Not too bad.
@@arronmunroe whats your condition?
Like most other people, I haven't been out much lately, but I've been feeling OK.
Woi! Jangan tembak dengan senjata semasa memandu!!