I definitely agree. I love the nitro and the purge but I don’t like how visible it is. Granted it’s not my car so I don’t wanna make anyone mad. Just my opinion.
How about black aluminium purge lines? I think it would look much better than the silver ones? Another Option to hide the purge lines would be to 3D Print the side vents with holes for the purge lines so that way it looks more oem like and you don't need the zip tie as you can also add a mount at the new 3D printed vents.
Thanks for your walkthrough of how you channeled all this system to connect. I think your safe to make some holes into the fiber composite body and retain structural health. I know C5's have been chopped to remove the useless trunk well to provide top access to fuel and suspension systems.
Since you were able to get the line/s behind the rear bumper cover I would route the lines towards the driver side between the rear tube and inner fender liner then down through the rocker panel (they are hollow) all the way to the front fender then you should be able to fish directly into the engine bay.
Bro that's so cool now the Vette really needs the tires and you should install the Ivan tampi carbon ducktail spoiler for even lower drag to get as much speed out of the Z06 love the build
U can hav it go through the front finders so u can lik hav it go do behind the seats move some of the carpet find a hole or make a hole n hav it go through the side skirts n route it through the finders might wanna take dat L n take the finders off but that’s jut an idea for u to go off of if u want to or want shorter lines
Yo hook up the 12v with a “piggy back fuse” and plug that into a fuse in the inside fuse box. Run wires under the door stills, they come off. And get that line zip-tied off of the exhaust!!! 😅
Hey man, when I ran my wiring for my launch controller, I ran the electrical through the grommet in the fire wall that the hood latch line goes through, it isn’t really big enough for the nitrous lines but it would work for the controller!
Nate, I have a modded 06 GT. It goes through the traps about 105mph. My problem is launching with 4.10 gears. I just bought a new set of MT Street Comps. 315/35/17. In your experience what is the optimal launch rpm and shift sequence? - Thanks , Mark
I have a 19 ,,zo6 m7...pretty much all stic...will stay that way...!!!I've had hot rods-etc since the mid 70-s...unless urr a proff. race car driver....no way can a person utilize all these horse powers???
Bro, maybe its just me, but I dont think its worth all of that. I got a Mustang that I want to have a purge coming out the ponys nose, but it would have to be a clean build
Hello, I am a manufacturer of C7 screen modification in China. We have an upgraded C7 Tesla style car screen, which retains the original car system and pays for the original car functions. In addition, we have added an Android system, which has a matching rate of Carplay, navigation, Bluetooth, video and other functions. Are you interested?
What a lazy setup! Tuck all the lines nice and neat? NAHH, just run everything right over the engine and leave it exposed. They even move when you purge. Lol
U can hav it go through the front finders so u can lik hav it go do behind the seats move some of the carpet find a hole or make a hole n hav it go through the side skirts n route it through the finders might wanna take dat L n take the finders off but that’s jut an idea for u to go off of if u want to or want shorter lines
Haha I get my z06 tomorrow and binge watched all your stuff 😂 perfect drop timing
Drive fast but smart brotha stay safe out there
Yo don wsg
Here's an idea, Paint the purge lines black so they don't show as much. What do ya think?
Yes
I definitely agree. I love the nitro and the purge but I don’t like how visible it is. Granted it’s not my car so I don’t wanna make anyone mad. Just my opinion.
Sad this guy can't take the time to react to comments. I'll pass on subbing
@@drewgrows7765he’s a busy dude man
How about black aluminium purge lines? I think it would look much better than the silver ones? Another Option to hide the purge lines would be to 3D Print the side vents with holes for the purge lines so that way it looks more oem like and you don't need the zip tie as you can also add a mount at the new 3D printed vents.
Thanks for your walkthrough of how you channeled all this system to connect.
I think your safe to make some holes into the fiber composite body and retain structural health.
I know C5's have been chopped to remove the useless trunk well to provide top access to fuel and suspension systems.
Go under the carpet. There is a grommet up near the shifter. Drop under the car and up into the engine bay.
Since you were able to get the line/s behind the rear bumper cover I would route the lines towards the driver side between the rear tube and inner fender liner then down through the rocker panel (they are hollow) all the way to the front fender then you should be able to fish directly into the engine bay.
I meant rear tub not tube.
You gotta get 4 bottles back there!
@chaseself5420 more nitrous oxide
9:28 did this man just flip us the birdie😂😂😂
Bro that's so cool now the Vette really needs the tires and you should install the Ivan tampi carbon ducktail spoiler for even lower drag to get as much speed out of the Z06 love the build
Put you a coupler and flex lines at the ends to put the purge tips where you like
U can hav it go through the front finders so u can lik hav it go do behind the seats move some of the carpet find a hole or make a hole n hav it go through the side skirts n route it through the finders might wanna take dat L n take the finders off but that’s jut an idea for u to go off of if u want to or want shorter lines
Very nice and creative! Well done! 🇺🇸
I watch every single video
NEVER lay under a Corvette without using some extra protection like a few jack stands. It's better to be safe than sorry. Just saying
Bro said "if you want to go to the Moon use this one a blue one" got me dead
Wait youre in hb are you getting pulled over every day?
Bro 👌🏻
10 on 10 🐐
Yo bro I just got a new drone let’s get some 4k drone footage
Does Nate still live with Drew Peacock and all those other content creators?
Yo hook up the 12v with a “piggy back fuse” and plug that into a fuse in the inside fuse box. Run wires under the door stills, they come off. And get that line zip-tied off of the exhaust!!! 😅
Hey man, when I ran my wiring for my launch controller, I ran the electrical through the grommet in the fire wall that the hood latch line goes through, it isn’t really big enough for the nitrous lines but it would work for the controller!
I wish someone made a video this good for a 6th gen camaro
Those easy trust me
Do you loose the ability to fit the targa top on the trunk ?
Can I ask what the best tire for a z06 is? Do you still like the r888r? I noticed you’re back on ps4s
No more videos?
Could have routed through the rocker panel
Nate, I have a modded 06 GT. It goes through the traps about 105mph. My problem is launching with 4.10 gears. I just bought a new set of MT Street Comps. 315/35/17. In your experience what is the optimal launch rpm and shift sequence? - Thanks , Mark
You look like faze rug
Still planning to shoot flames?
you still have this car?
Do c7 zo6 sound the same as zl1 camaro
Send them down the trans tunnel I'm a mechanic so I know
i came here to see it moving.
What purpose have these
Bro! What part of Montana are you! I'm from West yellowstone montana
He lives in Cali bro, car is just registered there 🤫
I just watched a tik tok video of the car and please do the turbo also
What model is that
It’s like faze rug but car guy and cooler
I have a 19 ,,zo6 m7...pretty much all stic...will stay that way...!!!I've had hot rods-etc since the mid 70-s...unless urr a proff. race car driver....no way can a person utilize all these horse powers???
All show no go.
Bro, maybe its just me, but I dont think its worth all of that. I got a Mustang that I want to have a purge coming out the ponys nose, but it would have to be a clean build
Hello Everyone!
Yo 👋
You guys are still asking questions to a dude who has not posted in 3 months, lol.
W vid
Hard pass for me ... just not clean enough of an install and the purge lines imo are gawdy.
Yodosan sakurasha 😍😍😍😍😍
Bro never actually posts videos of his cars running anything. All show no go.
Absolutely all show no go plus the worst way to install a nitrous system.
60 comments on an account with 531.000 followers. Bro, stop buying followers. 😂
Anyways, nice cars.
Hello, I am a manufacturer of C7 screen modification in China. We have an upgraded C7 Tesla style car screen, which retains the original car system and pays for the original car functions. In addition, we have added an Android system, which has a matching rate of Carplay, navigation, Bluetooth, video and other functions. Are you interested?
What a lazy setup! Tuck all the lines nice and neat? NAHH, just run everything right over the engine and leave it exposed. They even move when you purge. Lol
Show us how it runs ffs!!!
First
U can hav it go through the front finders so u can lik hav it go do behind the seats move some of the carpet find a hole or make a hole n hav it go through the side skirts n route it through the finders might wanna take dat L n take the finders off but that’s jut an idea for u to go off of if u want to or want shorter lines