Це відео не доступне.
Перепрошуємо.
From Front Wheel Drive to Rear Wheel Drive? How it is Possible?! V8 Swapped Honda Accord
Вставка
- Опубліковано 19 лют 2020
- From Front Wheel Drive to Rear Wheel Drive? How it is Possible?! V8 Swapped Honda Accor.
Today we made some good progress on the v8 swapped honda accord. The rear end is getting ready to be installed and a lot of the old accord floor is cut out. In the next video we will keep on moving and eventually get this thing on the ground as a rwd, v8, badass Honda accord.
#RWDhonda #LsSwapTheWorld #WorldsFirst
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
Underrated content. Spread the word people!
It be so sick to see you and Jimmy O tandem drifting Hondas…
I like that stance, can't wait to see the wide body
He just now did it
I agree
Said it before and I’ll say it again: HYPED for this! Love that you are not afraid of cutting stuff out to make the swap happen! And judging from your previous work you probably won’t even be able to tell that those cuts are not stock when it’s all done. Keep on keeping on!
Keep going forward u got this let the haters hate they r only hating cause they r jealous.
E Parker haven’t seen much hate at all which is really nice! Only thing is people hating that I took a gto and ripped it apart. Valid point. Yolo.
I’ve been watching your stuff for a long time now man I can tell you’re a little discouraged. Don’t be brother you’ve definitely got this and you’ll come out on top! You’ve done some crazy stuff in the past. She’s coming along good! Just look at the subframe rails on the gto and go for something similar based on those
Still loving the style and the attention to detail Adam, I also like the way you are telling others the basics of chopping up metal like you take strength out you have to put it back in, the big mistake in chop shop cars they endanger lives by thinking a weld on it's own will do then the car folds in half on the slab.
Man, every time I get on UA-cam to a new BodeVision video, I get all excited to see what’s next. Keep it up brother!!
Stephen Walker your the man! Thanks !
Was sent here by one of your fans who saw my Celica GT-SS, ls4 Celica build. I watched a bit of a couple of your videos. You have a new subscriber.
Watching you in this video say "I'm not really sure how I'm going to do it but I know i can do it". Maybe this way... maybe that way. That's how you gotta do it. 👍cut a little... check it ...cut more weld etc.
I'm very excited to see it finished, man, for real, you should study engeniering... greetings from Puerto Rico!
I wouldn't be surprised if he already has.
BORICUA....PAPI ARECIBO PR
I wanna do paint and bodywork cause of bode
cut out the floor of the gto will save a lot of fabrication time
Keep pushing, gonna be sick
Literally hooked on this build now. Keep up the good work homie
Nice job bro...keep on the build
This build is fully done at this point. Check out the full build playlist
I was thinking about doing something like this with my Buick Lucerne but I didn’t think it really be possible. But I was wrong. Your a baddass dude
Coming together kick ass
man , i love Betty so much. such a good looking late 80's car. i hated them as a kid but man , they grew on me so much
Good video Mate keep up the hard work
U cold 💯👌🏾keep going great work
Make a centerline mark it will make it easier to have the rear end track better
I'm gonna v8 swap my legend, it's pretty much the same kettle of fish so this series is very useful for seeing where the challenges will be
I wish u could release more videos more frequently, but I understand the endeavor u took on with the project and this ain't no paint job! Lol! Keep on rockin and Rollin man!
I think chopping the roof 3 inches would be cool but lots of work.
Bode, this is your checkpoint. Be sure to hydrate and adjust your posture!
What a sweet build. Can’t wait till it’s finished
You are so talented!!!
Keep on keeping on, this build is going to be epic! I cannot wait to see a slowmo of you drifting this beast!
You said stiffen the chassis up... I'm thinking full cage tied to both sub frames and the strut towers. Just a thought. Bodevision build siiiiccckkk.
Progress is key my friend Can’t wait to see the final product especially that white body though
Fox body steel flares 👌🏾👌🏾
Chipping away at it little by little. You're making some good progress. Keep up the killer work!
I am gonna call you Vision FrankenBody! :D Loving the progress!!
It's coming along nicely. Another great video 👍👍🇨🇱
Tread is backwards.😉 I really like what you are doing with the ol' honda. Good shit!
Love this type of videos. Bb5-bb9Prelude rear seats might work.
One of the cleanest cuts I have seen on all these youtube builts...
Looks more like surgery than back yard hacking to me ! 😎👌
Looking good man.
Sir that offset is more than Perfect 🤩.
Greetings from 🇵🇰
I think im paraphrasing a bit, but nothing worth doing is without challenges. You've got this.
Bode, your work is truly inspirational. I have thoroughly enjoyed every video you have released on this epic build! Your ability to keep a cool head and problem solve your way through each challenge is amazing. I have a 1993 Honda Del Sol in desperate need of a makeover, and you may have just lit a spark... Wishing you all of the best in this epic endeavor! Can’t wait for your next video and the next update on this beast! Great job, man!
Man this would be my dream car if I could have one
Come on B real from Cypress Hill !! This is a cool project but I've been waiting for you to get it done
that background music is fire. 2 fast 2 furious
You need an intern... lol. Those back tires looked huge on Betty White. Can't wait to see her sitting on all 4 tires.
Awesome. I gotta project like this in mind. 👍🍺
No sure how old you are but when that car was new (and the shit) that was the style with the poke on the wheels. Straight up Easy E gangster shit.
Making it wide body will be sick!
Some rear fenders from a Mitsubishi Starion would seem to flow nicely with the accords rear body lines! Either way dude this build is crazy. Awesome work dude!
Frfr
Loving the progress man! I think you should make your own 'one off' valve covers that say BodeVision!
Dude its going to be a beautiful monster when you're done!
Oh man I would love to give you guys a wild engine design I came up with and know it will work
😌 I know you can do it bode I have faith in you bro 👍🏼 it's alot of hacking but at the end soon as you patch everything up its gonna be stiffer then factory lining everything is the hard part #bodesquad #projectbettywhite
The driftcord build 😃
I think the covers would be a cool touch if you ground off the GTO and changed it to Honda
Awesome build series. Keep it up!
Looking great..can't wait till the paint haha
Looking good. Reminds me of a song a long time ago, Fat bottom Girls...😂
Robert Evans lol yeah they make the rockin world go round.
👍 for the music
Dude even if they send you to mars and have to figure your way back home, I'm not one bit worried. You'll figure that out and more
you're motivating the hell out of me man. I've gotten back to work on my project car since watching your videos so thank you for that. I've been building a 79 mini cooper with a b16a2 in it. Got the motor in, now i'm just plugging away at wiring
Marc Jackson go watch the mighty car mods mini build if you want more... they did a similar swap!
Matt L thank you, I’ve watched the series but no one has covered in depth the wiring of the vehicle
Marc Jackson no problem. Yeah wiring can be a bitch not gonna lie. You might be able to talk to companies like wiring specialties or ecu master or something for some more help/guidance. Good luck!
respect man this is alot of work without a lift!
Engine hoist through the rear hatch to hold up the subframe
Thinking on it while watching, make sure if you lift the front of the subframe it doesn’t put a bad angle for the drive shaft and rear differential u-joint or you could be having to be constantly replacing them! Not sure if you’ve thought about that yet just thought I’d give you input from the outside in
Slowly but surely it's going to be a great daily driver 👍
The easiest way to convert a FWD car to RWD when someone doesn't just have a kit for it is to do precisely what you're doing: find a car with approximately the same rear track width that is already RWD and steal its guts, then shove them under your car, cutting out any metal in the way, fabricating new suspension mounts where necessary, and then closing up and holes you may have made with fresh sheet metal.
7:12
Last video: I want to keep the stock look.
This video: I’m gonna put over-flares on it.
He mentioned keeping the body lines. Leaving that much poke would be dumb. Dont worry hes good at body work it wont just be some ebay screw on overfenders...
ScottStorm a scoop would be easy for a good body guy too... your point is lost on me.
You should definitely put the Honda engine cover and just tell people "yea she's stock"
As soon as I saw the wheel fitment I had one though. BOXFLARES!!!!
You’d be in my top 8 for sure.
I cant wait to see more this project is so cool
With your body skills how about building fiber glass/metal over fenders. Would be cool seeing that process in progress.
Thats the game plan for when we get there, long ways away! lol
Super like 😀👍
he made v8 killa into v12 killa
Hi Adam, Have a look at Throtl, anf Jimmy Oakes youTube Channels. They are also doing rear wheel drive Hondas. You Might get some inspiration from what they are doing. Jimmy Oakes has a buddy who is a certified frame Technician He knows what he is doing. Mickey Andrade is a Mechanic with years of experience doing engine swaps. I like what you are doing with Betty White a whole lot more, although there are people getting over a thousand horsepower out of K Swaps using Ebay 3582R turbos (really cheap) with rods and pistons, and built heads. Look at PFI Speed to see how. I think a LS swap with dry sump set up is amazing for a reliable drift car. Look at what Taylor ray did this his Miata. I really Love the paint job you did on his car. Not so into the Style he wanted in his hard top but Loved the Sprinkley Paint nonetheless. You are one talented dude. Keep uthje great work. You might find going with a dry sump, like Taylor did will solve a lot of your hood clearance problems. I personally used dry sumps in a four of my builds. You never have oil starvation problems and you can run external oil lines to make sure oil gets to places in the block that may be difficult otherwise, particularly in big blocks and rotary engines. Peace
Yooooo, so stoked for a widebody ls Accord
gonna do a swap on my 89 ford probe gt, the goal is to make the fastest of all time non stock of its kind
I want to see a Rw swapped Mazda 3 06’ that’d be sick
good stuff adam, if you can get a hold of a pallet jack/trolley or hydraulic lift table you could do the rear end by yourself, secondhand you should be able to find them cheap
Would of been hella cool if u put the motor in the back like a NSX. But still this is a epic project and ur doing a outstanding job.
Going to be mid engine swapping my civic when I get back from deployment, going to need to collect some much needed tools first but that’s definitely the plan. Who’s going to guess a 2000 4 door civic has a 300+whp civic in the rear? No one that’s the point lol
Some vox fender flaires would fit perfect
LETS GO BODE
Will you have to c notch the rear frame rails for axle clearance the build is awesome love the wheel choice
looks like a lot of fun. I always wanted to build a car like this.
You Could Make a Jig for the Rear Subframe and then make your own Subframe from Tubing to shed weight.
You should keep that brown/maroon interior
Started watching you when u painted Taylor's car(s). Now im sub'd to watch this project! 🤘🇺🇸🤘
For the back seat with the trans tunnel, something like the rear seat from a 4th gen Camaro would be perfect, single seat back with little bucket seat bottoms
I bet an S13 rear subframe would sit in there nicer ;)
I like the fat rear end it looks super bad ass.
You know this project is starting to remind me of Binky. Except this one will be done WAY WAY quicker.
Keep pushing Sir!!!!!
god damn , them wheels look gooooood on that bad bitch. wide as fuck. gonna look sooo good with a wide body. cant wait to see this getting together more
I like that u arent afraid to tackle the irs but honestly a solid axle would be way easier, less cutting and an easy 4 link rear with coilovers. Still love the vids thou
I inherited a Pontiac grand am from my mom but if put a pro charged 548 Hemi in it it'd be a bad badass grand am
great progress, 6k views already! picking up steam
So i have a pontiac gt prix 01 trying to ls and rwd convert it ...... its a dream waiting to come true lol
Hi mate, that’s going to be one seriously bad ass machine.
My thoughts about the over fenders looking at how far the wheels stick out is that the car would look super cool with a set of flared panels similar to the old Audi UR Quattro.
I like your steady methodical process when figuring things out, it’s always better to take your time when doing such a major conversion.
Bro you got me scratching my arm for the next video...what cha doing?!?!
lol the rear end is a bigger project than what I was thinking, its going to be a little time for me to make some good progress
BodeVision hey man as long as you making progress right! Love your work bro keep it up!
Looking great