Insane Body Swap: El Camino Front End on Honda CR-V & V8 Honda Accord is GONE | BodeVision
Вставка
- Опубліковано 10 вер 2024
- In this exciting episode of BodeVision, we make significant progress on our one-of-a-kind El Camino and Honda CR-V body swap project! We start by finalizing the e-brake cable, fabricating a custom handle to work with the extended floor. Then, we bid farewell to the V8 swapped Honda Accord as it heads off to the winner. Finally, we tackle the challenging task of mounting the El Camino front end onto the Honda CR-V engine bay. This involves a lot of custom fabrication, including building a custom tube structure to support the front end. Join us for another action-packed build update!
📺 Subscribe to BodeVision: www.youtube.co...
👍 Like this video if you're excited about our unique body swap projects!
💬 Comment below with any questions or suggestions for future videos!
Stay connected:
Instagram: @BodeVision
Facebook: @BodeVision
#BodeVision #CarBuild #BodySwap #ElCamino #HondaCRV #V8Swap #CustomFabrication #CarProject
Yes keep A/C. Yes turbo.
I'm so stoked to see this finished! I'm both a Honda lover and a Chevy lover. So this combo has me excited!!
Waited patiently for this one to drop
Love how you tied in the engine bay panels you created to secure that are for your fenders and front end too
I hope this channel continues to grow and rapidly at that. You’re amazing! You deserve all the subscribers and then some
Being from Alabama I know how hot it is down here, keep the A.C you'll be glad you did if you drive and drag or just cruise to shows.
Im from Florida right around thr corner from bode actually. Keep the a,c!!!
Yes, Drag and Drive!!
I'm in Ky and a/c is sin, never use it.
@@ItsDaJax here in southern Alabama we have high humidity that stacks on that heat and I've come close to dying in it twice so if the a.c works I'm using it.
@@M.Boatwright I live in Kentucky, I'm familiar. Summers average about 90-95° without the heat index.
Monte Carlo SS bumper would look awesome on there
I love what his did with the chrome front bumper tho
Great decision on keeping that ac in player! Rad stuff
As a long time Honda fan, I have been glued to your channel for this build.
Cool you went over the give away car. Hopefully the new owner enjoys it.
Coming right along ! A/C is nice if you can keep it.
The "Riceamino" is lookin good my cracka, keep up the good work!!!
Definitely impressive how when there's a major obstacle you just power through it no prob and find a solution. Looks amazing. Those panels are super cool too!
ditch the stock hood hinge and go for a hood strut set up, clear up a ton of space, love the build
KEEP A/C !!!!!!!
If you have to extend the drive shaft, you should get a Freelander drive shaft with a viscous coupler and pin the rear diff while you're at it. Especially if you plan on boosting it.
Dude never disappoints on this channel
Glad to see the update. I like this build. Doing well.
"We finally beat Medicare" 😂😅
Wonder who he's voting for lol
LOL!!!
That's funny.
I’m crying
Definitely needs a turbo setup. Cool swap
nice creative innovation,never wouldve thought of a crv meets a camino but its brilliant.....and im mainly a traditional american muscle car kind of guy who does love jdm,euro,italian cars as well
Would have kept cruise for sure
As an uncle with an ‘81 El Camino, I am sad to say you have effectively surpassed my coolness.
Fabricator you are sir. Great work.
El Hondamino !!!! Fire 🔥
It's Florida leave the a/c . But it's your build do what u like . Just a suggestion.
Looking good Adam you are making good progress and that engine bay is going to look mint👌👍
Keep up the awesome work brother! Can't wait to see how this continues to come along.
Keep the A/C unless you need to take it out for what ever reason. Believe me you’ll be using it
I love da crv Wheels on that el Camino lol
This Is My First Comment.
This Thing Is So Bad Ass!
I'm Currently Getting My 69 C10 Ready To Do A Mid Mounted Turbo K24a2... 😬
FILM IT, we wanna see!
@@StaredownGames well that's what this account is for. 😅 It is going to be bad ass! Front Mid Engine Turbo'd K24a2 Cantilever Suspension 69 C10
@@KSwapTheWorld69 I'm there for it!
Kansas is a big state, but I hope I see it running around sometime.
Yes been waiting…. Thank you bro loving it.
Where's the dohc vtec swap that's on the click bait photo? 😂 I'm guessing next video! Can't wait!!!!!
Looking good! It will be awesome!
@Motionauto needs to take notes and start doing something similar to this guy. I miss the dedication and Trevor‘s videos.
Fiberglass (or carbonfiber) hood & ditch the hood springs.
just paint on the rust, so it matches.
Killin this Build!
I'm sure that you squared up the front end with the hood before you welded all of that in, Right🤔😅
Looks Great!
Very cool project! Investors it. Nice work!
Niceeeeeeee work Man keep grinding keep goin Sky is th limit God Bless 🙏🏽🙏🏽🙏🏽
The engine bay is gonna have folks like 🤯 in the end.
Very nice progress, Adam! And good luck to the winner, too! Have a great week. Dutch regards Nico.
Yep hondamio. lookin good bode.
CR-Vamino is looking real good. Going to look killer when you are done. PLEASE put a real exhaust system on it and not a 'trash can' muffler like you see on so many Hondas.
be sick if you had some cool honda rims 3parted so you could run big wheels with honda rims.
That section you built looks like it will rub into the front corner of your front tires under a good bump the part that's beadrolled
Coming along awsome
It's coming together nicely. Great job
Awesome Video.. Just wished your videos were longer...
New here found you on Facebook. Looks like allot of content I'm interested in.
"She bangs" - Ricky Martin
Looking good 👍👍
Love it! Excellent work on the filler pieces! Dimpled and bead rolled is truly artwork!
Cool stuff!! Enjoyed watching ✌️ 😎
The "Hold my beer" build of 2024. Keep grinding brother.
You are obviously already planning to give this away because a Floridian talking about removing the AC is NUTS.
nice work
My uncle has a '36 nash with an LS fwiw 😂
You need to get a race with Tom’s refurb and his Honda powerd mustang don’t no if you have heard of him he’s cool
The swapmino
My uncle would've done a MUCH better job........... than me, on congratulating you on your progress. 😛 Keep it up bro! 🔥
El CR-Vino
All thst room under the hood.... screw the K..... i say go J! Still room for turbo(s) or supercharger.
Keep grinding 💪🏼
What are you planning for the fact the dashboard sits so much closer to the front, and looks as if the steering wheel does too which in turn the seats gotta be closer to No ? I felt like the inside while you was sitting was huge in overall length. What’s the plans
Is the driver side front tire unusually close to the new inner structure or just the camera angle? Looking forward to the next upload.
Dang man the car is coming along freaking great love it I don't believe the OG Betty white is gone hope she has a good journey with the new owner 👍 #bodesqaud #projectcrmino
Leave the A/C
Love the way you extended the e brake.
Great stuff G!! Love the reinforcement in place. Exquisite work bro. 🔥
My Uncle says Dimple Dies are just Speed Holes
I'd have combined both radiator supports, like; -\__/-, kinda. Also a/c is for the weak.
So when are boosted boiz juicing up that engine??
I don't see the windshield wipers on there?
Definitely leave the ac. The ultimate is a fast/quick car that also has ac.
Adam I think you do nice work , one thing I learned the hard way. when you have to fill your welding bottle ask your suppler what it would cost for the next size bottle up I know have all big bottles and they last a lot longer and if it was 70$ to fill the small bottle its like 90 $ to fill the big bottles( thats just and example )
I love the way it's coming out so far
My uncle is starting to like it and I love the metal work, beating medicare feals great 👍
Really dropped the ball not having a “Hawk Tuah” intro
😭
Hawk tuah burned hot and I feel it’s old news. That was on the agenda for last week, but I missed an upload
Looks like the rear wheel have WAY too much camber.
The rear is as low as the coilovers will set and i need to get a camber kit to pull camber. Once I get wheels I’ll worry about final fitment
What do you do with the tilted rear wheels?
Space ship cuz. They’ll be fixed
@@BodeVision Is it like rear control arms? I'm not familiar. will be watching.
Destroyed that f'n medicare 🤣 appreciate ya bud
I personally wouldn’t Biden the A/C… you live in Florida or are you having a senior moment and forgot 😂😂😂
🔥🔥🔥🔥🔥
Hello my friend I would like you to paint my car. How can I get in contact with you?
Constructive criticism; get someone to help with your algorithm, perhaps try starting another project, which would allow you to create more content. For as old as this channel is you should have way way more views. I’ll check in a couple of months and we’ll see how far along this build is.🤙🏽 hopefully you still have the construction gig available to you 🤙🏽
Love your vision and workmanship on the front end.
Did you test fit the bonnet before welding it all together?
Yes. I know it’s correct since the grille established the width
Beat medicare🤣🤣🤣 I see what ya did there
🎉🎉baddassery yo.
Yea buddy
Dont make it a race car.... keep the A/C you live in FL
👍👍🇺🇲🇺🇲👍👍❤️🤍💙
I just realized - maintenance is going to be goofy, given you'll need complete sets of both metric and SAE tools.
If you work on stuff, why wouldn’t you already have both anyway? Lots of equipment and vehicles come with both metric and SAE from the factory.
Beat Medicaid 😂
El Hondo
WE FINALLY BEAT MEDICARE!
...
😂
I have to ask. So why did you give the Honda away? Maybe you already gave that answer and I just missed it?
Need to put some 24" inch and make it a "donk". That would piss some people off :)
Paint it honda red like boosted boiz Kyle civic