How to Replace Front Wheel Bearing and Hub Assembly 2009-2020 Dodge Journey

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ib/1ASHF00453
This video shows you how to install a wheel hub and bearing on your 2009-2020 Dodge Journey. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2009 Dodge Journey
2010 Dodge Journey
2011 Dodge Journey
2012 Dodge Journey
2013 Dodge Journey
2014 Dodge Journey
2015 Dodge Journey
2016 Dodge Journey
2017 Dodge Journey
2018 Dodge Journey
2019 Dodge Journey
2020 Dodge Journey
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• 13mm Socket 1aau.to/oc/1AXAA00015
• 15mm Socket 1aau.to/oc/1AXAA00015
• 19mm Socket 1aau.to/oc/1AXAA00043
• 21mm Socket 1aau.to/oc/1AXAA00043
• 32mm Socket 1aau.to/oa/1AAST00003
• Brake Caliper Hanger 1aau.to/ob/1AXAA00084
• 1/2 Inch Air Impact Gun 1aau.to/oc/1AXAA00252
• Socket Driver
• Torque Wrench 1aau.to/oa/1AXAA00044
• Copper Anti-Seize
• Gloves 1aau.to/ob/1AXSS00048
• Safety Glasses 1aau.to/ob/1AXAA00343
• Center Punch 1aau.to/oa/1AXAA00055
• Hammer 1aau.to/oa/1AXAA00091
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@cliffallen1626]

Clear instructions, with the torque specs. The torque spec for the axle nut I’ve been seeing is 181 ft/lbs. Thanks for the video!

[@solarfinder]

Terrific content and the clear explanation was very helpful. I was a bit surprised how rusted the parts were, and how much I really wish I had a pneumatic set. :) Thanks again!

[@blades.]

Never seen cooper anti seize in a spray can. Might be a game changer for me

[@danielnewman4876]

super professional, well explained, fantastic tutorial , i am confident now i can do it , thank you so very much , God bless you

[@lambbenally]

Best content on UA-cam

[@brandoncraig2321]

Good work and I was so happy to see the brakes get replaced

[@j.d.9381]

DO NOT collapse the caliper with a vice grip. You can crack the cup. Use a the old brake pad with the correct tool.

[@briangammon6155]

Great video extremely well done and explained no one noticed the brand new Caliper through the wheel when reinstalling. You didn’t explain how to bleed the new Caliper 😂😂😂

[@Dubblesteel]

Thank you for your video, it helped me alot.

[@moparcuda1]

Axle nut is 118 lbs foot,,not 181 like you said

[@ValFolarin]

1. Why do we pump up the break pedal until it is firm?
2. For the rear wheel bearing replacement, we had to disassemble the ABS wire. Why was there no ABS wire in this case? Is ABS only applied to the wheels receiving power?

[@hasanenahmed2000]

nice job . Do we need to re program the ABS sensors after replacing the wheel bearings?

[@Relevantminded]

Is that a normal 32mm socket you used to remove that style of axle nut?

[@GorillaDev417]

Have a 16’ Journey SXT that makes a “spinning up” or “winding up” noise when I drive it. The noise isn’t responsive to the engine (doesn’t get louder when I rev or push accelerator) or responsive to the transmission (stays constant even if I manually shift). It does seem to get louder as the car moves faster and stops when car stops. No rough ride and car feels good, just the sound? Does this sound like a wheel bearing?

[@stevendegner9916]

Will these work for a 2016 dodge journey sxt awd 6 cylinder

[@user-eo5gc7dx6r]

Thanks!

[@latenite3931]

What attachment did you use to clean that surface?

[@leannbaxton8047]

Front is 118 ft lbs
Rear is 181 ft lbs

[@geo8841]

I have 2017 4 cyl journey same process?

[@dimakulikoff5154]

Привет на додж нитро также меняется передний ступичный подшипник?

[@c.p.5741]

How long does this take for two wheels?

[@garymerriett9882]

I did this to my dodge and now I get a vibration at 30mph

[@c.p.5741]

How long does 1 wheel take?

[@Peezy2xPM]

What kind of impact wrench was that

[@CIAplant]

180ft lbs is more like hd territory