F10 BMW 5 series M5 headlight lens replacement (step by step)
Вставка
- Опубліковано 1 бер 2019
- Here’s a video on how to replace the lens cover on a BMW F10 headlight. I hope you like this video. Please let me know if there is anything else I can make a video about. I work on headlights for a living, so ill be happy to make more vids. Follow me on Instagram @headlightheartsurgeon
Thanks a ton
Link to buy lenses
www.ebay.com/itm/For-BMW-F10-...
Link for the silicone
www.ebay.com/itm/Sikaflex-P2G...
Link for the cutter and blade
www.harborfreight.com/oscilla...
www.harborfreight.com/multi-t... - Авто та транспорт
this video is definitely legit. he's a real person who didn't search for a headlight lens diy tutorial before making his own headlight lens tutorial video..
I thought getting the headlight assembly out would be the hardest thing..... Now I see how to this and I've decided I'm paying someone to do it..... Damn you BMW.... U got me again
Lmaoo I had this exact same thought 😂😂😂
My recommendation for getting the permaseal out is to use a sharp 1/4" chisel. You can get a cheap package of 4 different sized chisels from Harbor Freight for like $8. Heat the tip of the chisel with a torch or over a gas stove for about 15-20 seconds and then start peeling up the permaseal from the bottom of the channel and then the sides. Continue reheating the chisel as needed. If you see smoke while peeling out the permaseal, your chisel is a little too hot. If it's a little too hot, it shouldn't hurt the plastic, but keep the chisel moving and wiggle back and forth if needed as you apply pressure and you won't harm the plastic at all.
Great video thank you !
Great Video.
Thanks a lot.
Nice job like new!
Wow! What a pain in the ass!!!
Nice job man.
Michael White Lol it ain’t easy that’s for sure. Thanks man.
@@pavmik1 can you do a set for an E60?? Let me know
@@mglcorrea00 same here. Did you end up having your headlights refurbished?
This is actually the safest and most non-destructive method of removing the lenses.
nice work, thanks for sharing !
Thank you!
Nice choice of music
Replacing the whole thing for that little chip? I was thinking about doing that for one that had fading though.
Very good Very nice very great work 👍
Thank you
Amazing jop man ! Just perfect!
Why dont you do it as business? We will support you and buy from you
Great job
Thanks!
are you able to replace the grey/silver lining on the inside? if so do you know the part name?
Great video dude! I have lens that needs to be replace can we talk about you replacing mine?
Hey, thanks for this video, I am looking to change mine as it cracked and this should be really helpful! Apart from this, Also, just like the lens, do you know anyone that sells the black plastic housing? I've tried looking online and couldnt find any.
Yuvraj Singh Hey no problem! Hope I covered everything you need to know in order to do it without any issues. Sadly I do not know if they sell the back housings:/ I’d look on eBay for one with a really busted lens but with a good housing. Maybe you can pick it up for cheap. But make sure if you have the xenon lights, you buy only xenon because the halogen one will most likely not work. Let me know if there’s anything else I could help with. Thanks for watching:)
Mai Bombay me Kurla CST road par BMW mrs Audi ki head light Bina dameg kare open karta hu magar khubsurat achchi fiting ke liye 1day rakhna hota hai ...Mai sirf BMW Audi mrs important car ki head light polish with open kar ke polish karta hu 🌹🌹
Actually, you can use heating gun and detach lense without cutting. then you can polish old one and restore for spare part.
I’m a try your way
you tip
I actually just did a lens replacement for my 2014 f10. Heat gun did not work at all. Oven did. The permaseal took me 3 hours to clean up. It did not melt
@@migmike007 Permaseal will need liquid(alchole kind) to make it soft. But oven and heat gun will give same function to heat up the seal.
merciii 👌👌👍
Hello would you be able to put a link for the best quality lens for the M5 F10
hello,,looks easy how you do that,,but I not so sure do the same thing if you can help me,,firstmhowmany space is beetwen white eyebrow and lens? I have some dirt on eyebrow and one fly inside headlight,,is possible clean eyebrow and take out flay throught turn holes?? Thanks
Hey man great job i learned a lot. Tried it myself and it looks like it didnt seal correctly, it got wet inside again. Cost me a tms module replacement. Now im in the process of taking it off, cleaning the old shitty silicone, then gonna apply your recommended one.
My question is, how do i test it if it is sealed good from water, no leaking and messing up the modules and stuff???
Thanks so much!!!
sam alhajari Hey!! Thanks a lot:) I actually have a video on how to test for leaks on my channel. I’m sure it will do a lot better than I could explain through message. I don’t have many vids so you shouldn’t have a hard time finding it. Best of luck!
You can do a smoke test once sealed via the vent
Hi, i Want to change my headlight lends for my bmw. How much do you charge for this job? Thanks
Hello you taking any side jobs i need a set done for a 750li
Golf job👍
Good job👍
All, inner part for lens (not the lens) broken on mine, any idea on part number for this ? thanks in advance
Hello,
please where can I buy a new light cover? Thank you very much
GOPRO FIRMA hey! Link is in the description
Where can I buy headlight lens for 2018 Acura RLX?? I need to replace mine. Thank you
Thanks for the vid but what kind of silicone did you used?
Carl Charbonneau Hey no problem! I used windshield silicone. I bought it from a local guy that replaces the glass on the cars. But I found the exact same one on eBay. I’ll attach the link. If you need any other help I’ll be happy to assist. Also make sure you heat it up really well because it’s really hard to squeeze out.
www.ebay.com/itm/Sikaflex-P2G-Windshield-Urethane-Adhesive-Primerless-Automotive-Glue-Sealant/111457693369?epid=21002624576&hash=item19f3656eb9:g:-lAAAOSwhilZZmcL:sc:USPSPriority!29316!US!-1
@@pavmik1 it's much easier with buthyl than silicone. It's always plastic and it's easy to remove lens again if You want to change something in this headlight.
@@mariodee9518 Yea i use that too but for headlights that originally come with it. On this headlight it doesn't stick to whatever is left of the old silicone.
@@pavmik1 podaj namiar na FB
That Sealant is for Glass, how well it works with plastic?
Hi, not sure if you are still doing this for others but I have the exact same headlight and in need of a replacement lens. In NY. Please let me know. If you are not, I do have a question, why does the lens have to be cut, then heated and removed. If using a heat gun a section at a time, can the lens be pulled out without cutting?
yes it can and way easier and safer.
Mayb e whilst in the oven is it useful to cover the lights themselves with foil to repel any heat?
It works good just like that
I bought the car already with broken leans, you can put hand inside
Can I change?
I need to replace the hallo ring lights and my high beams headlights in my 2011 528i BMW. How much will it cost me
Hi where are you located??
Pretty familiar with electronics and headlight disassembly. Any good places to get parts for these?
i have this exact headlight i just had get replaced with a new one cause the main lense got cracked. didnt know i could replace the lense.. im looking to sell the old one. everything works perfectly fine still all connectors and stuff. it doesnt have the xenon bulbs but the main bulb is still in there. i have pics if u or anyone is interested. literally the only thing that happened was the main lense cracked.
also have the gasket o rings brand new pack with it
@@txddjames yo where you located. need the silver bottom lining part
Hi! Thanks so much for this video, I'm fixing my boyfriend's lens soon and was wondering what sort of bit you used to remove the bezel? Is it a torx t30?
Frankensquatch awesome! Glad I could help. Yea it’s either t30 or t25 if I’m not mistaken. What helps is all the screws are the same. Inside the light and out. So you won’t mix anything up.
@@pavmik1 you are awesome, I appreciate your insanely fast response. Your videos are so helpful!!
Frankensquatch haha thanks. Do my best to help:) lmk if you need anything else
Great video, however instead of cutting the lens, you can use a heat gun to melt the glue and take off the lens
@Ciro Torres It doesn't work on F1x headlights. Glue is much harder in those.
@@aleksisaarela7637 it does work, search on youtube
Heatgun bad idea lens melts its a real pita, glue is mega strong
That’s what I was thinking!
Heat gun is bad but oven is ok?@@powertech6816
Excellent work. Do you perform this on any other make and model vehicle?
MrCaribe65 Thanks! if they have replacement lenses then yes.
The adhesive on these newer ones is an absolute nightmare I found a drill works quite well😂
What’s the name of it
How did you drill it? Pls explain
Just noticed cracks on my gti mk6 headlights... looks like i will be doing some cutting soon.. I just wonder if the replacement lenses can handle the Sun and rain without turning into shit in 6 months
ElNrtNBoy --- awesome man good luck. I think they should last several years at least. If not you can re clear them. I have a vid on that. That will add a thicker layer of clear coat and last years.
Im following your process for my BMW headlights. I was able to remove the lens cover and now working to remove the old sealant.
In relation to the staples you removed. Did you put them back in after you removed them or you left them out?
A few of mine just broke off, so not sure I need them or not.
Hey, I just left them out. The silicone dries stiff
Thanks, this helps. Another question, you used silicone instead of Butyl tape (like others use). What was your reasoning for that. I bought butyle tape, but after watching your video I'm leaning towards the silicone. Any thoughts or insights is greatly appreciated.
Absolutely! I prefer the silicone because it sticks to pretty much anything. The butyl doesn't stick well to the old silicone that you cut out. @@qa054c
@@pavmik1 okay cool, so basically the butyle will eventually cause rework later on. I'll work to purchase the silicone.
Oi manda o nome dessa máquina que senhor está cortando
Do you know know to replace the light on top of light
Can something like this be done with the tail/rear light in order to fix the led (module)?
Kristjan J I haven’t done any taillights yet:/ If I’m not mistaken, taillight lenses are glued to the housing. I think it would be hard taking it off without cracking the lens.
Hello I was wondering what kind of temperature?Is it celsius or fahrenheit ?
Basil Al widnawi Fahrenheit
the perfect way to remove the lens is put that headlight to big oven and let it heat so the black glue will melt so you can remove it easily without breaking the old lens. i know it because im one of the employees who’s making headlights of different types of car
im experiencing moisture getting inside my headlights (f10, 2015, 535) could this be the problem?
Pepe Fabos could be there’s a crack somewhere. I have a video on how to check where it’s leaking from. That might help:)
Will a heat gun work instead of using an oven? And also do you have to remove all the lights and the wiring before using the heat?
Sohail Dar haven’t tried but I’m sure it’s possible. You don’t have to but it will be better if you do.
Any difference between the pre lci and lci f10 headlights?
c_Pho Nahh they are both the same. LCI is actually a little more easier because it’s more plain inside. The lenses are the same for both.
Lenses are the same, but not the blinkers. LED headlights are not the same tho are the xenons tho
Can some one please let me know is the inner side of the headlight will work or it’s just for the show in day light light. Only outer side of the bulb is working in bmw 1 series m sport 118d 2019 model
If both sides don’t work I’m pretty sure it’s just for show. There are several bmw lights that have a projector but it doesn’t shine
Hej maybe you can help me woth BMW E91 lci Xenon for Open
hello how long to do it all? thank you
nike mouk 4 hours plus minus
I looked for you on IG . Your name doesn’t even pop up . I’m in NJ I can come to you . How much do you charge ? I already have the lens
What kind of silicone you suggest
Butyle tape black stuff sticky comes in a roll
Where i can buy that plasti trim from minute 13.37 mine it’s craked and I can’t finding that thx
I don’t know where to get those myself. Usually I just fix it and paint it or if it’s bad I’ll get it from another light.
Would you be open to do 2 headlights BMW F 10 for customer pay. How would I get in touch with you?
hello sir ! I'm can buy 1 set ! but can you send to VietNam ?
Man I just bought 2013 528i x drive so can I get a Lens replacement or do I have buy the whole assembly the car didn’t have a lens at all ? The dealer said I had to buy the whole assembly they don’t make lenses separate
Lagreg James hey you can buy the lenses separately. It’s. Lot of work but it’s definitely a lot cheaper. Doesn’t even surprise me that dealer said that. You said your car was missing both lenses?
HeadlightHeartSurgeon it just missing the passenger side yeah there telling me 2000 dollars to replace it auto zone has one for 450 The Lights work perfectly find
Lagreg James auto zone had a replacement for these? Lol
HeadlightHeartSurgeon yeah the hella
Do NOT us a cutter . Tou can do it with a heat gun
If the lens is garbage then why not, it makes the process a lot easier when you can pull against the lens. The heat process and jamming drivers in-between the seal will cause way too much flex / distortion in the lip, it will never seal up the same again when compared to how this guy did it, it left the lip perfectly straight
Hello, I have a BMW 5 F10, last week after I washed it the led lights failed , any clues about what could be. The back round cover was loose. high beam (Xenon) works ok and curve light turns on but after a few seconds it turn off. Thanks.
Claus Scholz Hey! Thanks for the response. It could be a number of things. If all of them work and then shut off. I’m tempted to say it’s the TMS module (the black motherboard looking thing). I had the same problem but mine wouldn’t come on at all. That module controls all your LEDs. But I’d hate for you to change it and it goes bad again if it is still wet inside. What I would do if I were you is take off all the modules and caps off of the headlight that got wet inside. Get a hair dryer (not a heat gun because you’ll melt the light). Let the dryer blow hot air in the light for about 20-30 minutes so everything dries out. Your light will get hot but it won’t melt don’t worry. And separately let your modules dry in the sun for about 30 min. Just in case there is still some wet spots on them. Make sure everything is dry because just a little bit of water can cost you a whole lot more money. Then take off the TMS module on your good headlight and put it in the headlight that got wet. (Compare their part numbers to make sure it’s the same).Also put all the Modules back on so you can plug it to the car to test it. If that fixes your problem just buy a TMS module for the side that went bad. Make sure you buy one that has the exact same part number and make sure it’s OEM. You can buy it on eBay for about $200. Which one of your LEDs do not work? The turn signal and rings?
@@pavmik1 Hey, thanks for the answer, both LEDs don't work; the turn signal and the rings, I don't know if the white stripe at the top also carries a LED, it won't work either. The curve light (H7 bulb) turns on and then shut off. The one with the Xenon D1S bulb works properly.
@@clausscholz7053 yea the white strip has 3 small LEDs on the corner. Hmm thats very interesting. I dont see why the halogen bulb would come on and then off. They usually work no matter what. But first thing first i would dry out the headlight and all the components. If you change the TMS module from the other side and it still doesnt work, try swapping all the bulbs and the LED modules (turn signal, rings) from your other headlight. I know the turn signal wont fit in because its opposite side but as long as you get to plug it up. Sorry there is only so much i can help over messages. Let me know how it works out.
@@pavmik1 Hello, Thanks for the answer. Sadly I don't have the proper space to remove and do the things you are suggesting. The TMS module controls only the LEDs? if so can you give a link like eBay or amazon where to buy. I'am from Chile and the BMWs Dealers here charge waaaay over the actual price. For example they wanted to charge me 370 USD for one D1S bulb plus installation. I bought it for 150USD and installed myself.
Claus Scholz oh my.. do you have an eBay account? You could have bought a d1s bulb for under $20 USD brand new. It’s not the one that comes originally but still the same result. Can you send me the part number that’s on that TMS module? It should be 7 or 11 digits. You can’t miss it. I’ll find one for you on eBay. Yes the TMS module controls the LED’s.
Im trying to find someone in Ireland to do this one for me, literally seems like noone in here is able to do it, it's been a while since I'm looking for someone and still couldn't find anyone😪
Dang I’m sorry. Wish I could help you out.
Is this same process for non M 5 series 2011? I have a 2011 535i and I’m having trouble, after cutting the lens off, the internals didn’t come off
Yes it is. Yours looks identical?
@@pavmik1 very similar, few differences. Okay I was having trouble getting the “bezel” to come out with old plastic, but just got it off! Now just need to trim/peel the old adhesive then run to store to grab erathane and put new cover on. So far so good. Should I oven bake again before stripping out old adhesive? I do have cutter tool for use. Thanks In advance
@@khayyam947 you don’t necessarily have to, especially since you have a tool but you can try it out maybe it will make it a little easier. I just try to avoid putting a light in the oven as much as I can. In case I forget about it and I come to a melted pile of plastic lol
@@pavmik1 thanks for all your replies man. I’m 90% done stripping old adhesive off. New cover sits almost flush on assembly 😎 cheers man and thank you for the video and help
any body in miami do this job?
good video and interesting but do not like the idea of putting the light in the oven. it must effect the components in the light, may stop working after a short time.
Steven Clarke never had a single issue with that. I’ve even washed headlights with water and soap before. As long as you dry it out completely they have always worked perfectly.
@@pavmik1 The light looks as good as new, saving money is what its all about.
Steven Clarke Always. I don’t remember what these cost at the dealer just the bare headlight without modules but if I’m not mistaken it’s over a grand. Ridiculous.
I can’t find you on instagram… I also don’t have instagram. Is there any other way to contact you. Please
On 04:00 what happens if you plug the cable in but on different side?
haven't tried but I assume it wont work
@@pavmik1 thank you for reply
Why dont use just heat gun? I always use heatgun to open headlights
Deividas Globys because I have an oven and it’s more convenient for me to use it. And the end result is cleaner. Plus these lights are hard to open since they don’t have soft glue.
HeadlightHeartSurgeon My friend got f10 2011 with same lights he wants that i open them and change lens,so is any chance to open just with heat gun and some screw driver to push it?
Deividas Globys don’t think so but you can try.
Mate I crashed my headlight how can i find you to repair my one
Nima Nasseri hey, are you in the United States?
HeadlightHeartSurgeon no bro,in from uk london.i wish be there
😂
HeadlightHeartSurgeon are you on the east coast?
Hey. Is there difference between lci and prelci? Maybe i can contact you somehow? I want to ask you few questions :))
Ro Co Not really. Lenses will fit both. Yea you can reach me at 8643594635. I don’t have an Instagram anymore.
@@pavmik1 i am not from usa, maybe you have viber, whatsapp or something else :)
Ro Co I do have what’s app
Man this way of change the lenses is fucking pain in the ass,my car is a n55 ain’t that’s easy like this guy said !!!
If my had the small chip of he’s, I wont do shit, now Houston I have a problem 🤧😂😃🍻 F. I need to relax before I do broke this shit let me drink my beer !!!
ok,,now I see the turn holes are closed,,unfortunately
Don’t guys try to attempt his method of cutting the lance cover and than bake the whole headlight ! BIG NO NO NO
Just use heat gun and go around it , it’s less time and no mess .
Dont think it would work, the silicone is just glued too strong it was so hard to get it off with all the tools and grip you have (after cutting the lens)
I used heat gun and worked fine. Never touched oven as I have no idea how to use oven 🤣. Hardest part is to clean it after taking lense out.
I imagine the previous owner drilled holes to drain the water out of them
Hi I bought a new one at the dealer for an x2 and it won’t turn on
A headlight? You probably need to program it to your vehicle
@@pavmik1 thnx
Hello there, I would gladly pay you to do this for me, I have a set of these exact headlights that I'd like the lenses replaced on. How can I contact you besides ig? I only have UA-cam, tictok, and email
Hey where can you buy a lense
Hey, I get them on eBay.
@@pavmik1 thanks!
I don't know if you're still seeing These comments but I need your help Replacing lens on a 2013 F10. Some one hit and ran while parked.
Natasha N just happened to see at a perfect time. What can I help you with?
@@pavmik1 how wow I wasn't expecting u to answer but here goes, first thank you so much for responding. Someone hit my car while parked and I was told the whole thing needs to be replaced nothing is wrong with it but the broken cover. I do not have the monies to pay for a headlight. So are u still doing this type of work if so where are u located?
Natasha N yes I still do this. I and located in South Carolina. If you want to message me on Instagram you are more than welcome to. I’ll probably reply faster there. My username is headlightheartsirgeon. Thanks
@@pavmik1 I'm not a social media person my friends laugh at me all the time. I don't mind the time you respond to me. I wish you were closer I could drive to you, I'm in Boston Massachusetts.
Natasha N Not a problem. I think you need new friends if they laugh at you for that. I totally respect it. You can ship it to me. If you don’t mind the wait.
Why did you cut it, you had to heat it, it would be completely removed
So cutting the lens is the only solution. Damn. It's risky. Need to have my f10's lens changed but now i think i should probably leave it
Haris Sajid Hey, no cutting isn’t always the best option. Only if the lens is cracked then yes. What’s wrong with your lenses?
@@pavmik1 hi! My lens are fine. They just have too many scratches now. So I want to replace it with new lenses
Haris Sajid check my latest video. You won’t need to cut them. Way easier
Brand new is $1000+ my friend
There has got to be an easier way to do this. 🤔
Yes there is. Watch M.Ovidiu two videos on this subject, on UA-cam. He's a pro,
But you could first put to the oven the remove everything together no cutting etc...
Christian Andolini Maybe it’s possible. But this is the best way that works for me. That way the housing looks neat after you are done. If you try to pry the lens out you will most likely have a chewed up housing. It’s even super hard to do it when I cut the lens. I can only imagine how bad it would be trying to pull it all out in one piece.
Yeah ain’t that simple these are permasealed
How much you charge for this?
James Curtis $350
😂 😂 😂 He Saud 350
How long does this take if I ship the item to you .
Where are you from? Can you do my light? lol
Be Ready Handball South Carolina. Sure
So you can’t just bake these lights
why dont you put in into oven for 10 min then you dont have to do any cutting
because it has hard silicone that doesn't get soft when you heat it.
I just did this for a customer last night. The permaseal was harder than I thought it would be but not impossible to pry open. Also what makes this harder to pry open is the fact that the housing is thick. But lots of heat is needed to get it done. 250 oven at least
Hey Man i have a moist in the headlight and the dealer asked me to replace the whole headlight ,i'm like what $3500 to do that ,can you help?i sent you insta message
Cutting? Are you serious?
Use butter with a sprinkle of salt and olive oil before putting in the oven.
😭😭😭😭😅😂👌
Why didn’t you just put it in the oven from the start
In my opinion, having done this before, it's better to cut the lens off first so you can pull it out cleanly with pliers and hands after heating. This avoids damage to the housing caused by prying. One extra step ends up being less of a hassle and ensures the housing plastic remains pristine.
What’s your contact info I want this done to my car
What is the name of your business
Muy bueno
Nah son Really said yeah ima just cut right through the lens to remove it and still ended up having to put it in the oven to remove the rest of the lense 😭😭😭 (not to mention it’s a bmw headlight 💀)
Are you interested in working on mine for money?
Nino Fajardo I mean if you would like me too then heck yea!
HeadlightHeartSurgeon How can I contact you ?
Nino Fajardo sorry for late reply you can message on Instagram. My name is headlightheartsurgeon
HeadlightHeartSurgeon I can’t find you , I need mines to be work on , 2008 bmw 535i
Just buy a new headlight, instead of doing this hanibal lecture work and possibly costing you more in the long run. Water leaks etc can short or burn modules in your car, which can cost thousands. Shop around you can find gently used newer one. This aint worth it to save a few bux.
Just buy a new one
Lol do you even understand how much these cost? For $50 I can fix this one to look like new. Why pay $700 for one that will still look bad anyways.
Are you f**king serious 😅🤣🤣🤣🤣🤣🤣🤣🤣
You get a heat gun and remove the glue.
DO NOT DO THIS TO YOUR CAR
you clearly have no idea about life.