Thanks for support my friend. I'm gratefull for constructive criticism, and have no hard feelings for all the other hate comments comming from useless tits hidden behind anonymity of internet that can barely afford keyboard that they type in.
Why is everyone hating on this video?? Obviously it’s not going to perform better for under twenty dollars. Keep doing your stuff man, I found a few useful cosmetic products in this video that were very helpful!
Well mostly cause half of these aren't really car mods and they show m badge stuff of non m badge cars and you should know that gets the crowd wild when they see a fake m badge
Coming from an AMG guy, this is a great video! It may not all be mods to the car, but these little touches here and there can go a long way. Especially the little details on the tire valves, or the illuminating reverse light which helps to get a better view at night. If you have an M car, u deserve to do anything with it, whether it being pushing it like how it’s supposed to be driven or adding M logos every angle to the car. You work hard for it, it’s your car, so do whatever u want to it. These little bits personally for me are pretty cool!
Wow I was worried what I’d find on this video. Pleasantly surprised! Great picks for tasteful mods, and great video quality that actually shows the products. Thank you! 👍🏻
I purchased a used 528i with aluminum valve caps and it corroded to the valve. I ended up replacing the air valves on all the wheels and reattaching the TPMS sensors. Pain in the butt job. Use plastic caps only.
I love these suggestions, but DON'T BUY the aluminum tire valve caps! I live in Chicago, so maybe it was the snow and salt, but mine rusted to the valve stem and had to be cut off! In less than a year.
Metal valve caps will cost you the price of new valves for each one you fit. They heat and cool, eventually welding themselves onto the thread, and they will NOT come off.
I don’t get it...??? I have exactly the same BMW (520d F10) and I have had the same metal valve caps on it for almost 5 years and they come off just as easy as the first day I put them on! So whoever told you they “weld” themselves to the value is talking crap IMO.
Well if you do you will need the correct LED bulbs for the reversing lights. The ones shown are not. Compare the fittings of the 2 types of bulb shown.
When people read "Perform Better" for $20 and expect to get HP/TQ increases are the same kind of people that expect to get 35hp from a cone air filter xD
Guys be so careful with valve caps , they get rust in time and can make a big problem to remove them later . Great video man , thanks for sharing this with us ;)
Hi mech adventures, just wanted to know how’s the catch can holding up in the winter when water condensation freezes inside the catch can, would it block the air flow? I live in Alberta too! Thanks
Really liked the video. Would definitely like to see other stuff in different prices. If if I could make one suggestion please consider the audio when making these videos and perhaps even and professional-grade camera as I believe it'll really help your channel and the quality thereof. Again thanks! Have a great day
Disregarding oil catch can this video is more like top 10 things not to do to your BMW. In my country most of these mods are what only people of russian ethnicity would do to their cars. Dont really get it. Keep your car clean, polished, waxed and well maintained and just enjoy it. Dont add any cheap crap to it. Spend that money in a detailing shop.
Fair enough, if you don't like it don't put any of those on your car. But let decide others what they want to put on their cars if they like it or not. Its their cars, they can put pink lips all arount and there is nothing you can do about it. I'm fascinated how everybody has tendency to tell others what to do.
I like BMWs just becase it had tons off stuff aftermarket you can change.With out it i would probably be bored with my 2007 E93 long time ago but its here and still love it ,changed lot off stuff that keeps it fresh looking
I bought the valve caps online from amazon for my X3, i think they are aluminium but the internal thread is not long enough to cover the existing valve thread which leaves a few mm's exposed, so threw them in the bin in disgust. Just something to be aware of!
I was trying to figure out why nothing wants to ship to my US address all the Amazon links are in Canada just FYI Also great mods thanks for putting it together! Rock on!
I have an update I just switched to Amazon US and was able to buy the upgrades I've received em and installed em my Bmw looks sweet Thank you for your video!
The door light you taking about is that the one I can insert any M logo slide in it or is it fixed slide only ? Looking for the light I can change the logo anytime
Nice video I'm definitely going to look into the Car Compact Baffled Oil Catch Can. I have a BMW 428i gran coupe 2016 so u recommend the one in your description?
Orange reflectors are required in all of Canada and US. In Europe, not required. I been dicing it myself by disabling the orange side marker lights with Carly to emulate a true European car
never use the wheel caps as they infuse with the metal on the valve and are hard to open. it happed to me and I had to cut the valves and had to replace them to inflate the tyres.
I don’t get it...??? I have exactly the same BMW (520d F10) and I have had the same metal valve caps on it for almost 5 years and they come off just as easy as the first day I put them on! So I don’t know how yours “welded” themselves onto the valve??🤷🏻♂️
On a grey or black on black car the orange reflectors take away from the look of the car and it actually makes a difference visually with the gray or blacked out reflectors
Those were nice suggestions. I'm curious about 2 items. 1st...the backup light...what do you mean to get the one rated so no error on dashboard? 2nd...oil debris trap...do you have a video on how to install it?.......Please advise......thanks!
My quote from description ("$20 limit and prices can slightly vary due to currency exchange rate, date of posting the video and updated products in listings. I'm updating links regularly") I'have updated the link for you. I belive if you search enough you will find one with different logos too
Remove black center cap from the old one and slide new one over the old one, new one will come with instructions but main idea is not to remove or dissasemble the old one.
MeNameTallis for my f30, the red button came with clay. You put the clay on the old button, let it connect, then pull towards you fast and hard. Aline the new one, and pop it back into place.
www.ebay.ca/itm/2pcs-Car-LED-Door-Logo-Projector-Ghost-Shadow-Light-for-BMW-E60-M5-E90-F10-X5-X3/372560149907?var=641336558409&hash=item56be50bd93:m:mGYzz6Zw3HCVsw5vreLbQ8Q&vxp=mtr or generally look for "f10 door light M" in search engines
I would appreciate it if you gave me the key word for the product or sending a link.I have installed the reverse lights and it’s irritating every time I start the car.
I like these mods man Great job don't listen to the haters brother.
Thanks for support my friend. I'm gratefull for constructive criticism, and have no hard feelings for all the other hate comments comming from useless tits hidden behind anonymity of internet that can barely afford keyboard that they type in.
@@MechAdventures have to admit I loved your comment towards the keyboard warriors.
M logo + 10HP
Damn straight lol
100 horsepower extra
When did the keychain became a car mod?
Never if you dont consider key as part of your car just like wheels
M Stefan you need car keys for a car don’t you smart ass
Legit one item in this video is an actual modification.
thats the best one gives you +20 hp
Lmaoooo
Why is everyone hating on this video?? Obviously it’s not going to perform better for under twenty dollars. Keep doing your stuff man, I found a few useful cosmetic products in this video that were very helpful!
SportsDomination ii
Will if you switch off eco-mode...
Well mostly cause half of these aren't really car mods and they show m badge stuff of non m badge cars and you should know that gets the crowd wild when they see a fake m badge
The red start/stop button actually increases life expectancy by a couple years
Good video man. People in the comments clearly don’t know what mods mean. They think a mod is something major all of the time
Less than $20 per month for AAA ultimate is one of the best BMW mods.
Agreed brother
Indeed
What’s that
@@Ratbatalie insurance😹
Coming from an AMG guy, this is a great video! It may not all be mods to the car, but these little touches here and there can go a long way. Especially the little details on the tire valves, or the illuminating reverse light which helps to get a better view at night. If you have an M car, u deserve to do anything with it, whether it being pushing it like how it’s supposed to be driven or adding M logos every angle to the car. You work hard for it, it’s your car, so do whatever u want to it. These little bits personally for me are pretty cool!
"don't dump it somewhere" bahaha I was just laughing at that and then you corrected youself haha.
I like these, getting some for my dad’s birthday, thanks a lot!
great vid 💯
Nice 80’s porn music lmao
😂😂
Wow I was worried what I’d find on this video. Pleasantly surprised! Great picks for tasteful mods, and great video quality that actually shows the products. Thank you! 👍🏻
Great vid. Eid Mubarak
Going to order from the links you provided excellent video my man.
Awesome thank you!
I purchased a used 528i with aluminum valve caps and it corroded to the valve. I ended up replacing the air valves on all the wheels and reattaching the TPMS sensors. Pain in the butt job. Use plastic caps only.
Just lubricate threads, don't fit them dry.
@@tony5006 Why bother? when you can just put on regular plastic caps and not worry about them. How many people will remember to lubricate valve caps?
@@jerseyneil1 possibly the kind of people who are bothered to improve how their car looks.
I enjoyed the video bro thank you, getting a bmw soon so this was information for me
I love these suggestions, but DON'T BUY the aluminum tire valve caps! I live in Chicago, so maybe it was the snow and salt, but mine rusted to the valve stem and had to be cut off! In less than a year.
I live in poland - mine too :D
Great video man
Good stuff mate. You have some great items here. You got me motivated.
Title is a little misleading. All of these make it "look" better as opposed to "look and perform" better.
Still a good video.
Love. It ❤well done ✅
Metal valve caps will cost you the price of new valves for each one you fit. They heat and cool, eventually welding themselves onto the thread, and they will NOT come off.
Wow I was just about to buy them. Do you have a suggestion for better option
To stop them welding use copper grease
I don’t get it...??? I have exactly the same BMW (520d F10) and I have had the same metal valve caps on it for almost 5 years and they come off just as easy as the first day I put them on! So whoever told you they “weld” themselves to the value is talking crap IMO.
This guy: M badges
James May: "Standard!!"
wow man cool video from cape town south africa
I've done the door lights and love them
Your car is gorgeous!! Loved the video! Nice job:)
Have you got links to the reverse lights, red start button and the oil catch can? Also an installation video for the catch can
Great video man, I'm going to end up doing the majority of these mods to my e60. Appreciate it!
Well if you do you will need the correct LED bulbs for the reversing lights. The ones shown are not. Compare the fittings of the 2 types of bulb shown.
When people read "Perform Better" for $20 and expect to get HP/TQ increases are the same kind of people that expect to get 35hp from a cone air filter xD
Lol yeah, cones don't do shit. Only performance ones can get like 5hp if you're lucky but it's negligible. Stock intakes are just fineeee
Guys be so careful with valve caps , they get rust in time and can make a big problem to remove them later .
Great video man , thanks for sharing this with us ;)
about if you use antiseize
Valve caps have a 99.4 % chance to get stolen inside first 7 days. xD
you need to buy at least three sets
Good little upgrades these that don't cost lots of money. thanks for the video
Well made video, practical, and focuses on the products not the video maker.
the voice over😂
Love the video bro very informative and useful 💯👌🏾👌🏾👌🏾👌🏾
Cool vid man
A key chain is neither making my car look better or make it perform better. That's like including a M Sport jacket...
How useful is your car without the key and without jacket ? 😉
@@MechAdventures i drive mostly nacked and use a screw driver instead of a key
@@ebenezerwheezer7036 good choice 👌
Bree Koch LOL I think he meant naked😂😂😂🤦🏽♂️🤦🏽♂️🤦🏽♂️
The reflectors will help my car look cleaner with white instead of orange. Thanks!
Can you post a video on how to install the start button and the multi media button
MM button slides onto old one
This is going on my bimmer playlist
Hi mech adventures, just wanted to know how’s the catch can holding up in the winter when water condensation freezes inside the catch can, would it block the air flow? I live in Alberta too! Thanks
Hi, its more gunk rather than water, it does not freeze nor have chance to freeze as engine compartment gets hot pretty quick.
What company makes the red start button you are showing? The link merely takes me to amazon - I want to order the same one as in this video. Thanks!
ebay or ali will do
Hi ! Can you please tell me the part number for the MMi button with M logo ? And also the part number for the start stop button.
its aftermarket product with no PN. just type MMI knob for BMW in ebay or aliex
Really liked the video. Would definitely like to see other stuff in different prices. If if I could make one suggestion please consider the audio when making these videos and perhaps even and professional-grade camera as I believe it'll really help your channel and the quality thereof. Again thanks! Have a great day
Great video bro! Thank you for doing it! Any more videos?
Yes i do, lots of material, less time for editing, but more to come.
Those reverse lights make a huge difference 👍👍👍👍
“Dump it somewhere”
…
“Don’t dump it somewhere” 💀
🤐
Disregarding oil catch can this video is more like top 10 things not to do to your BMW. In my country most of these mods are what only people of russian ethnicity would do to their cars. Dont really get it. Keep your car clean, polished, waxed and well maintained and just enjoy it. Dont add any cheap crap to it. Spend that money in a detailing shop.
Fair enough, if you don't like it don't put any of those on your car. But let decide others what they want to put on their cars if they like it or not. Its their cars, they can put pink lips all arount and there is nothing you can do about it. I'm fascinated how everybody has tendency to tell others what to do.
Haha! That's where your wrong! I bought my BMW from my kind weird Russian friend!
Why are talking no one cares about your opinion
I like BMWs just becase it had tons off stuff aftermarket you can change.With out it i would probably be bored with my 2007 E93 long time ago but its here and still love it ,changed lot off stuff that keeps it fresh looking
That key chain can be used to tie boats to the harbour, its effing massive.
To stop your tyre valves from welding use Copper Grease
Where can I buy the catch can. ? Great vid btw.... good work !
Ebay Amazon, video on how to install comming next week
Thanks a lot . And the m logo lights are awesome . Nice car !
thank you for your video
I don't know why, but non of these gadgets I found prettier than bmw originals. Nice rims on M packet and that's it.
I bought the valve caps online from amazon for my X3, i think they are aluminium but the internal thread is not long enough to cover the existing valve thread which leaves a few mm's exposed, so threw them in the bin in disgust. Just something to be aware of!
I was trying to figure out why nothing wants to ship to my US address all the Amazon links are in Canada just FYI Also great mods thanks for putting it together! Rock on!
I have an update I just switched to Amazon US and was able to buy the upgrades I've received em and installed em my Bmw looks sweet Thank you for your video!
Any install videos for these products?
Pcv catch can soon
That’s the 750i? Bad ass car!😃 Flagship of BMW...
Thats F10 5 series, very similar to 7 series
M D nothing like a 7-series... it’s a 5-series (F10), next is a 6-series, then after that is the 7-series!
Price of the car 50k$, price of the microphone 6$ LOL
LMAO
And just like the cheap mic is noticeable, so are $20 "mods"
Lmao 🤣 dump it somewhere ahha. Good vid bro. Thank you.
3:18 We got These in the m4, but with real leather from Bmw M. They are way better than the normal Floormatts.
A new meaning to the phrase “inside voice” 🤣🤣. 👌
😂😂😂
This is perfect for people that have no idea what to do with monesy
😄
Good stuff man 👌
Thank you!
The door light you taking about is that the one I can insert any M logo slide in it or is it fixed slide only ? Looking for the light I can change the logo anytime
Nice video I'm definitely going to look into the Car Compact Baffled Oil Catch Can.
I have a BMW 428i gran coupe 2016 so u recommend the one in your description?
Yes i do recommend to every direct injection engine.
Did you buy or install your? I have an f33 4.28i coupé 2014. I like this oil catcher.
@@premium2554 I installed mine
@@MechAdventures can you share any video about it? How can we install it?
@@premium2554 I agree as well since I have a F36 428i gran coupe 2016 I only had it for a month.
Do you have a video on how to install the Oil Catch Can? Has it really helped at all/much?
comming soon
Yes, I wonder as well thank you
Orange reflectors are required in all of Canada and US. In Europe, not required. I been dicing it myself by disabling the orange side marker lights with Carly to emulate a true European car
Great video thanks
I’m a simple man. I see ///M Logo, I click the video.
These "mods"
Are how i spot broke bm owners.
Car leaks oil, warning lights on, but every bit of ebay tat.
Keep it up.
Royce Julian focus on yourself man quit trying to spot out other people’s shit🤣
never use the wheel caps as they infuse with the metal on the valve and are hard to open. it happed to me and I had to cut the valves and had to replace them to inflate the tyres.
Sheeesh I have some in the shopping cart right now. Good thing I say this
@@tamzbee6104 don't use them. Use the plastic ones. Even mechanics at ATS could not open the valve cap.
I don’t get it...??? I have exactly the same BMW (520d F10) and I have had the same metal valve caps on it for almost 5 years and they come off just as easy as the first day I put them on! So I don’t know how yours “welded” themselves onto the valve??🤷🏻♂️
Can you show us how you installed some of this stuff?
new video uploaded Sir
great accessories, definitely going to get them. nice video 👍🏽
good video
Honestly, why the heck would you put those reflectors on 😕
Because why not ?
On a grey or black on black car the orange reflectors take away from the look of the car and it actually makes a difference visually with the gray or blacked out reflectors
Great contents and I love your videos and guess what I just subscribed you , thank you
Those were nice suggestions. I'm curious about 2 items. 1st...the backup light...what do you mean to get the one rated so no error on dashboard? 2nd...oil debris trap...do you have a video on how to install it?.......Please advise......thanks!
will do separate video on Oil Catch Can Installation.
You need to buy can-bus (error free) LEDs as the resistance is slightly different on standard bulbs and will throw up an error on your dash
nice mods man!
hey do u you know what i can do if i wanna have quad exhaust tips with out removing the muffler or straight piping?
You need to cut out current tips and replace them with new double ones, and adjust difuser
@@MechAdventures thanks so i can just buy double exhaust tips and wield it on, Thanks! imm try it today
@@t-dontcap1896 Yes exactly
Excellent video... Thanks buddy
How do you install the oil catcher?
Video coming shortly
MechAdventures Thank you. Also you link for the light bulbs only go to the Canadian site. How can i find the exact same ones elsewhere?
@@TotalFreshness search Boodled 921 LED on Amazon.com
@@TotalFreshness type Boodley 921 led on Amazon.com
Hi great video but could you also attach the links for Europian market as well, most of the links cater to US/Canadian clients.
Title also said perform better, does that mean the keychain added 15hp ? 😂😂 nice video anyways.
So basically turn your bmw into a M series for cheap got it....I’m in lmfao
Mike Delacroche bet pull up
It is an Msport and has plenty of M logos from the factory.
Good vid👌
Where can i find the logo light ? The one on your link is no longer valid, please
amazon or ebay, just type "bmw door light"
The Idrive button its 45 dollar Not 8$!?
And when u removed how did u got light to it? And on pictures doesent show the m logo like on yours
My quote from description ("$20 limit and prices can slightly vary due to currency exchange rate, date of posting the video and updated products in listings. I'm updating links regularly")
I'have updated the link for you.
I belive if you search enough you will find one with different logos too
MechAdventures My Bad then But thanks for These tips I will buy one off the Idrive Knob Only makes little bad that its not aluminium its Plastic..
@@bmwsincekid its plastic, but thanks to how its sitting on old one it still feels sturdy.
@@MechAdventures "date of posting the video" bro your price for the mats is $70.20 not $20. Why would they reduce the price by 250%.
@@adamellis1995 watch video again and pay attention. Link shows full set for $70 now because they probably did update it.
be careful with the valve caps they corode ion the valve thread use copper slip.
How did you install the push start button?
Remove black center cap from the old one and slide new one over the old one, new one will come with instructions but main idea is not to remove or dissasemble the old one.
MeNameTallis for my f30, the red button came with clay. You put the clay on the old button, let it connect, then pull towards you fast and hard. Aline the new one, and pop it back into place.
Nice vide!
Can somebody link me to the door light at 1:58 please? Can’t find it anywhere online.
www.ebay.ca/itm/2pcs-Car-LED-Door-Logo-Projector-Ghost-Shadow-Light-for-BMW-E60-M5-E90-F10-X5-X3/372560149907?var=641336558409&hash=item56be50bd93:m:mGYzz6Zw3HCVsw5vreLbQ8Q&vxp=mtr
or generally look for "f10 door light M" in search engines
MechAdventures Hey man thank you for replying, but the one you linked was a different light. I can’t find that vintage looking bmw logo door light
Do you have the Ebay link to the Door Projector Light you showed at the 1:58 mark in the video?
It’s in the description
Great video! Thanks for the suggestions.
at 1:57 i cant find that emblem or light anywhere, do you have a link for that?
They are on amazon. Called courtesy lights
Key Fob/ no , too bulky and unnecessary - the others seem good especially that nice red start button.
That reverse bulb vs led doesn't match each other Mate. Connector I different.
You need to get LED with same connector as your original bulb
Not a hater but reverse lights are not meant to help you see. It’s so other people know you are reversing....js
Bullshit!!! Driver needs to see behind car when backing up. Also makes back-up camera work better.
I like this but how the hell would a 2 gram valve cap change anything balancewise???
Hey I’m a 16 year old and my mom gave me her X5, loved the video, how do I find the second projection lights on eBay?
Hello where can I find this error free bulbs/load register? Thanks!
Ebay, amazon, auto parts stores
I would appreciate it if you gave me the key word for the product or sending a link.I have installed the reverse lights and it’s irritating every time I start the car.