How to replace the softtop on a 1992 Mazda Miata | STRAIGHT TO THE POINT

Поділитися
Вставка
  • Опубліковано 14 жов 2024

КОМЕНТАРІ • 89

  • @kylooiskorean
    @kylooiskorean 7 місяців тому +19

    Gotta hand it to you man this is probably one of the only soft top install vid that actually shows you how to do the job.

  • @Beaniespedigree
    @Beaniespedigree 11 місяців тому +12

    Excellent "how to" video without some guy wasting my time telling his life story. Thank you!!

  • @gustavomedina4299
    @gustavomedina4299 3 роки тому +58

    Watched it at least 10 different times, the only competent soft top video I could find, thanks a bunch for the video.

  • @agkracing140
    @agkracing140 Рік тому +16

    Thanks so much guys! My daughter and I just completed a new top install. We watched your video first and then followed the video step by step. We can't tell you how incredibly helpful you guys were. Thanks again!!

  • @noahchiasson7809
    @noahchiasson7809 Рік тому +4

    Your video just saved me. I’m installing a robbins top on my 92 and the instructions are super vague and leave a lot out. Thank you so much!

  • @creativeexperience6388
    @creativeexperience6388 5 днів тому

    Definitely the best video I’ve seen yet! Still a little intimidated

  • @jayjmedina
    @jayjmedina Рік тому +7

    I’ve now used this video 3 times to install my soft top and help 2 friends change theirs, AMAZING VIDEO THANK YOU!!!

  • @bakerXderek
    @bakerXderek 3 роки тому +27

    Best video on this I found, thanks !

  • @MrMatthewcropley
    @MrMatthewcropley 8 місяців тому +1

    best video I seen of a replacement yet, thanks!!

  • @ianjohnston8057
    @ianjohnston8057 2 роки тому +7

    Trying to tackle this tomorrow. Thanks for showing every step. No bs, gotta love it.

    • @QuincyStick
      @QuincyStick 7 місяців тому +1

      How'd your install go?

  • @soccerman0021981
    @soccerman0021981 2 роки тому +3

    Best vid on UA-cam that I've found, just ordered a new soft top and will be using this as a guide for sure. Thanks fellas.

  • @t0ny21
    @t0ny21 2 роки тому +5

    This video is dope. Really was a life saver. Made installing the top smooth. Thanks for making this

  • @RalphColmar
    @RalphColmar 2 роки тому +2

    Thanks 4 years on this video really shone a bright light to day, just got to put the interior back together in the morning (y)

  • @BatmanIII
    @BatmanIII 2 роки тому +1

    Thanks for this video. I just completed ours today. Couldnt have done it without you two

  • @yammo323
    @yammo323 2 роки тому +4

    Thanks, this was super useful and to the point. Benchmark for how all instructional videos should be done!

  • @katelynpineda9752
    @katelynpineda9752 11 місяців тому

    bro thank you, this video was so much easier to follow

  • @Thatdavemarsh
    @Thatdavemarsh 3 роки тому +3

    Great video. Shows all the steps nicely. Thanks.

  • @eclecticcollected8570
    @eclecticcollected8570 5 місяців тому

    6 hours later
    ....
    Done! 😅
    Thank you for the tutorial 😁👌

    • @WesMatt
      @WesMatt 4 місяці тому

      4 hours for the tension cable 😅

  • @donealable
    @donealable 2 роки тому +1

    This was solid. Thank you. I'm going to try it. The only step you skipped is the one that everyone seems to fear.. attaching the rear section.

  • @AMajorOddity
    @AMajorOddity Рік тому

    Brilliant video, followed every step, and it worked like a dream, thanks!

  • @PTSOPHOTO
    @PTSOPHOTO 2 роки тому +1

    Great video! I now know what to watch when I'm changing the top sometime this summer!

  • @mascorod
    @mascorod 3 роки тому +1

    Really nice video guys! I’m from amsterdam and i think i’m gonna do it myself now i have seen this!

  • @georgiazoschke3097
    @georgiazoschke3097 2 роки тому +1

    thanks for the great instructions on swapping soft tops. took a long time but the end result is perfect.

  • @forrestrobin2712
    @forrestrobin2712 4 місяці тому

    Thanks guys. Judging by the comments I got lucky and didn’t watch a load of other useless videos before getting to this one. All I need now is to find the time to get this done…

  • @sandyparas6960
    @sandyparas6960 3 роки тому +3

    what brand top did u use? website name? thanks for a great DIY miata top replacement video!

  • @nagyattila9304
    @nagyattila9304 3 роки тому +3

    Thanks for the video! Great help!

  • @creativeexperience6388
    @creativeexperience6388 5 днів тому

    Wish I knew exactly what bolt you used instead of the rivets

  • @snipesy
    @snipesy Рік тому

    Awesome tutorial!
    how many factory rivets did you need to replace with bolts?

  • @jasona8964
    @jasona8964 Рік тому +1

    Thanks for sharing! I wish there was some more detail at 15:41 sliding the 2 sections into the frame rail.

  • @kyleworksoncars
    @kyleworksoncars Рік тому

    im gonna make a video doing mine but just time laps and tell people to watch yours if they need a play by play cuz this is good

  • @kalebmeier6817
    @kalebmeier6817 5 місяців тому

    So how do you put the rain rail rubber thing in with the brackets? I put the rubber rail on the bottom of my soft top and put the rivets in and everything. I put the metal in but the washers won’t go on. Am I missing something?

  • @mikegggg222
    @mikegggg222 4 місяці тому +1

    90 is next top still good,but I prefer ,glass,best

  • @pedro6248
    @pedro6248 4 місяці тому

    great video!

  • @justaskhow
    @justaskhow 2 роки тому +1

    Please tell me which softop manufacturer yu used. The Robbins are very expensive.

  • @stephanegenest6793
    @stephanegenest6793 5 місяців тому

    What brand is this top ! Will it last 5 years.

  • @ashrockstar5556
    @ashrockstar5556 Рік тому

    Video has been super helpful throughout my whole setup but when it comes to re attaching the rain rail with the soft top is where I’m super confused because you don’t show it

  • @WiSeNhEiMeR-1369
    @WiSeNhEiMeR-1369 Рік тому

    THANKS
    COOP
    1993 "NA" MIATA Automatic Transmission
    ...

  • @chriskross2859
    @chriskross2859 Рік тому +3

    Tip for those struggling with the tensioner cable after putting the new fabric on. Unbend a metal clothes hanger and feed it through from the spring side. Then tie dental floss to the tensioner cable and to the clothes hanger and pull the dental floss as you push the cable through.

  • @waynewilliams8288
    @waynewilliams8288 2 роки тому

    Good video with step by step

  • @landotrujillo6573
    @landotrujillo6573 Рік тому

    is there any problem if you don’t feed the tension cable through the new top?

  • @trevisbooker8675
    @trevisbooker8675 2 роки тому

    Excellent video thank you

  • @francoissaad6576
    @francoissaad6576 Рік тому

    What was the size bolts he used for the soft top to replace the Rivits?

  • @j8ycie
    @j8ycie 2 роки тому +2

    Not all heroes wear capes

  • @imwatchingyounow
    @imwatchingyounow 2 роки тому

    I'm getting ready to put a Robbins top on. Does anyone know who the manufacture of this top is or if it's similar to the Robbins top.

  • @johnnycee5179
    @johnnycee5179 Рік тому

    Making it a 2 man job helps, on my 3rd top, have to do it all myself.

  • @MrChickenspit
    @MrChickenspit 3 роки тому +2

    what soft top did you buy?

  • @gamingchunkii1076
    @gamingchunkii1076 2 роки тому +1

    My rain rail has Rivets to the soft top. Does it need them? Can I just drill them off?

    • @mickeydiaz438
      @mickeydiaz438 2 роки тому

      Needs it or u will have leaking top u can still drill rivets off just make sure to rivet it back on 😃

  • @bartmeuris8826
    @bartmeuris8826 2 роки тому

    Super job thanks

  • @andrewkazemian8384
    @andrewkazemian8384 3 роки тому +2

    What did you do about all the rivets you removed?

  • @Shane20231
    @Shane20231 2 роки тому

    How do you line up the soft top with the rain rail?

  • @Thatdavemarsh
    @Thatdavemarsh 3 роки тому +8

    Got to think I’m going to pull the seats when I do it.

    • @RalphColmar
      @RalphColmar 2 роки тому +1

      I pulled my passenger seat, left in the UK, to make access a bit easier, oddly despite being left handed the drivers side seat was not a big issue.

  • @travisallen2093
    @travisallen2093 3 роки тому

    How does it look with the top down ? Does the retracted top lie flat ? Those fitted glass tops don't work, do they ?

  • @Maxkhmyz
    @Maxkhmyz Рік тому

    Thanks bro

  • @robbiecurtis8628
    @robbiecurtis8628 2 роки тому

    which soft top is this

  • @jackiekanngiesser7315
    @jackiekanngiesser7315 3 роки тому +2

    How long does this all take ?

    • @Dice_weiss
      @Dice_weiss  3 роки тому +4

      I think it took a realistic 2 hours to do it all

    • @jackiekanngiesser7315
      @jackiekanngiesser7315 3 роки тому +2

      @@Dice_weiss Thanks so much !! I've a 1999 MX5 , my brother is hopefully replacing my top tomorrow 🤞🤞

    • @Dice_weiss
      @Dice_weiss  3 роки тому +2

      @@jackiekanngiesser7315 hope it goes well!

  • @jonathanparkhurst1080
    @jonathanparkhurst1080 2 роки тому

    Did you ever reinstall the rain rail

    • @Dice_weiss
      @Dice_weiss  2 роки тому

      Yeah, we did but I don’t think I got it on video. he either put it back on the same way it was attached before. I think it was originally riveted on

  • @alonzojohnson7563
    @alonzojohnson7563 2 роки тому

    Good 👍 Content

  • @su3095
    @su3095 2 роки тому

    The damn top wont close in the front... Any suggestion?

    • @Dice_weiss
      @Dice_weiss  2 роки тому +1

      leather will stretch over time but until then have someone help you close it and adjust the latches to make it easier to close

  • @1TheGamingLynx
    @1TheGamingLynx Рік тому

    Life savers

  • @fixingproblems3183
    @fixingproblems3183 3 роки тому +2

    Rain rail is attached to soft top with rivets. You will have leaks.

    • @Kendkend
      @Kendkend 3 роки тому +4

      no. the factory only uses rivets to make it easier to install. It has been installed by many with no rivets without any issues, as long as you make sure the rain rain is below the belt molding lip and if stud seals were required they were used correctly along with correct sequence of bolts torqued down

  • @georgkohlhas8131
    @georgkohlhas8131 11 місяців тому

    This can all be done with the top on the car, you don't need to kneel on the floor. Plus you save a lot of unscrewing.

    • @louisperrino8391
      @louisperrino8391 7 місяців тому

      Any video ?

    • @georgkohlhas8131
      @georgkohlhas8131 7 місяців тому

      @@louisperrino8391 ua-cam.com/video/Gp7PZnR34OY/v-deo.htmlsi=tvuKh9v12dKDHhFB

  • @dha588
    @dha588 2 місяці тому

    Can I pay you guys to do it lol

  • @donaldwhitlock171
    @donaldwhitlock171 3 роки тому +8

    Took me and pops…7…fucking…hours.

  • @skyhawk7935
    @skyhawk7935 2 місяці тому

    It's not necessary to remove the seat belt bolt.

  • @imsethtwo
    @imsethtwo Рік тому

    the shitty top that I got had no holes pre drilled/cut and this job is making me want to KMS

  • @marhistica2280
    @marhistica2280 3 місяці тому

    ❤😂

  • @alonzojohnson7563
    @alonzojohnson7563 2 роки тому

    Tarp needed

  • @thewitchertales
    @thewitchertales 2 роки тому

    Saw the 500 tools showns and not needed i. The slightest and clicked off the video.

    • @MastaSquidge
      @MastaSquidge Рік тому

      If you already know what tools are needed or not why the fuck did you come here in the first place? You're already the expert.