How to Replace Front Left CV Axle Assembly 2006-2009 Mercedes-Benz E350

Buy Now!
New CV Axle Assembly from 1AAuto.com trq.video/ia-1...
This video shows you how to install a new front left cv axle assembly from TRQ on your 2006-2009 Mercedes-Benz E350. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This repair was done on a 2008 Mercedes-Benz E350 4Matic 3.5L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2006 Mercedes-Benz E350
2007 Mercedes-Benz E350
2008 Mercedes-Benz E350
2009 Mercedes-Benz E350
Tools you will need:
• Pry Bar trq.video/o3f-...
• 21mm wrench
• 22mm Wrench
• 17mm Socket trq.video/obPj...
• 21mm Socket
• 27mm socket trq.video/oah-...
• 8mm Socket trq.video/obsT...
• E10 Socket
• Ratchet trq.video/obSX...
• Socket Extensions trq.video/obPj...
• Torque Wrench trq.video/oaWe...
• Gloves trq.video/oaDt...
• Safety Glasses
• Floor Jack trq.video/oakp...
• Hammer
• Jack Stands trq.video/o8v-...
• Pole Jack
• Punch
• Rubber Mallet
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Mercedes Benz E350 3rd Generation 2006-2009: • Mercedes Benz E350 3rd...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@edgbostonnorth7167]

Thanks for the repair info, specs and sockets info.

[@CourtneyTilkins]

Is this set up similar to a 2007 C280?

[@rizzotto139]

Why not disconnect the upper control arm and sway bar link ?

[@modhua4497]

Great job! Where is your auto shop located at?

[@david-koehler]

Well done!

[@david-koehler]

Very helpful!

[@darrylirwin1399]

Shouldn’t be over stretching your torque wrench like that.

[@MrPhlypc]

Won’t work right if you buy it LOL at least not on a c300 need original