VOX Tonelab LE Tube Replacement and Adjustment Tutorial
Вставка
- Опубліковано 5 вер 2024
- For any questions you can contact me:
eugen.scobioala@gmail.com / eugen.scobioala
Download the Manual HERE:
www.manualslib...
Music: "Breaking Away The Ground" by Valery Stepanov
All Rights Reserved to Valery Stepanov
Hey thanks a bunch - that really helped a lot! Tube trimming in progress. Can't wait to hear the difference between 12AX and 12AY. Greetings from Germany, T.
I just mine in from Japan yesterday. What lights up the display, (bulbs,led's,fiber opt's) and is there any adjustments? Tried using it outside & couldn't see a dang thing! Happy so far though.
great, please you make an demo sound ambients.
What is the trim pot to the right of the tube voltage trim pot?
Hello! This pot is to setup Expression/volume pedal
Hola, muy interesante tu video, en una tonelab SE el ajuste es igual?
Hi! Probably it is! You have a screw on the back panel between Return and R outputs. Use the same steps as I show on LE.
@@eugenscobioala Thanks for the answer. Just one more question, once these steps are done, should I turn off tone lab or should I go to some function?
I just open mine to put the spur in place of the switch 1 cause it had issues and when i put it all together the lamp and the screen where only powered and the screen had only the backlight.
Any help with this?
Dear friend greetings from Brazil. First of all thanks for the videos. Could you help me with a question? I have a VoxTonelab if after a hard reset the amplifier simulations stopped working. Could it be the valve?
Hi Rodrigo! Thank you! No, it's not caused by valve for sure. Does the Amps knob works when you change the amp models? Or it's dead?
Hi, i've got the same issue, the amp know works perfect, but when the amp simulation it's on i can't hear anything@@eugenscobioala
My LE keeps saying it's too hot even when the bias pot is turned all the way down. Why? Thank you.
Hey man, can u help with a thing on my tonelab ? The modulation driver sometimes (like a few in a day) turns on randomly. Do u have any idea whats the cause ?
What is the sign the tube is going bad? Decreased signal output? I ask as mine, while playing, the volume/signal output faded out. It's still there but very low and poor quality. It did this previously but then would begin operating normally.
Hello! I'm not sure for your case, but the decrease of output signal is one of the signs your tube is not ok.
@@eugenscobioala Thank you.
So I recently acquired one of these, everything cuts on and the face display, buttons, and knobs all function. However, no sound at all unless it's bypassed or on the tuner function. Any thoughts?
while there is the volume knob on the back side where you plug in your guitar, there are volume settings that can be accessed with the knobs in the middle of the board.
Have you tried doing a factory reset with the pedal board? Look up the buttons to push for a factory reset. If that doesn't fix it then it could be the tube.
I tried to reset the pedalboard, I'm thinking it could be the tube. No sound at all, yet everything else seems to work.
@@ColorSkyMusic If it was jostled or dropped the tube may have come loose in the socket. Or it could just be the tube is bad as you say. I have one and it is noisy and the 1st switch for effect 1 is bad. Gonna have to crack it open soon.
Hey men, thanks for the video
I wanna ask you where can i get a new tube ?
Hi! Thank you! I bought mine from eBay
How many screws are you removing to get the motherboard off? I’m having a hard time getting at the tube
Me too. It's a real headache 😂
@@eugenscobioala let me know if you figure it out. I’m thinking about just putting it back together at this point
Dude, do you know where to get the service manual ?
I need my switches changed so badly on my LE. Who can I send it to to have it fixed? HELP ME
its weak side are its flympsy buttons. I change the damaged buttons every four-six months. It's not so difficult. If you're good enough in soldering, just buy some buttons in internet and install them by hand.
What happens if you leave the voltage high or low
A Scottish motorcycle mechanic once said so wisely: "There's only one way to find out ..." ;-)
Jest aside: I just started with the non-adjusted tube and no error message. Starting with the trim program showed a slightly low voltage (as I "sized down" to 12AY7). Just tweak around I suggest! (And report the results).
Hi, which valve is the original one, and which valve can I replace?
Hi, you may use all 12ax7 brands. I put the 12ax7 from ElectroHarmonics in mine.
Valery Stepanov = Valeriy Stepanov?
Yes.