BUDGET HOLLEY EFI DIGITAL DASH! CHEAP AND EASY TO INSTALL! E36 Turbo LS Swap Ep: 38
Вставка
- Опубліковано 21 сер 2024
- #holley #terminatorx #holleyterminatorx
In this episode I show how easy it is to get a cheap digital dash for your Holley Terminator X system. Check the links below to build your own!
CHECK OUT OUR GREAT SELECTION OF PARTS AND MERCHANDISE!
www.lowboostfi...
LINK TO THE HOLLEY DATA CABLE
amzn.to/3kog3HW
HERE IS A LINK TO A CHEAP WINDOWS TABLET (new)
amzn.to/2YBvSTY
CHECK OUT THE LOW BOOST FILMS STORE!
www.amazon.com...
GET YOUR LOW BOOST MERCH HERE!
www.amazon.com...
LINK TO THE E36 BRAKE UPGRADE
• THE CHEAPEST BIG BRAKE...
CLICK HERE TO SEE THE FULL SWAP
www . • E36 LS Turbo Swap
-My Equipment-
Gimbal-Ziyhun Crane 2
amzn.to/2HgHrY1
Camera- Canon Rebel7ti
amzn.to/2Kp3Cwr
72 inch Tripod
amzn.to/35MM5Xo
Mic- Rode Video Mic Go
amzn.to/3lNfJkC
3 Suction Cup Mount
amzn.to/35KXfvJ
Music- FREAK THAT, by Fayzed - • Hard Trap, Guitar Chil...
Intro by / copyrightfreemusiccfm - Авто та транспорт
Thanks bud. I'm building a 49 Chevy and the 5-in gauges are expensive and this is the exact idea I was thinking. Now that I've seen it done, I plan on popping a tablet in the spot of my gauges due to being on a tight budget.
Perfect!
Great video! Thanks for sharing this!
Thanks! I’m glad you liked it
Thank you, this is a car less expensive option for me. Currently LS swapping an e46 drifter
Oh nice! It’s holding up well 2 years later too
Thanks for the great info!!
You’re welcome!
Those holley screens are too expensive for something so small, like 1200+ for a 6inch screen that’s insanse
Yeah, this was a great alternative
Ya and you can build Them youself for under 500 buks mey much less. is they only thing holding me back from opgrade my polo derby from 83. I could build one. But i what aem stuff because of the 22 channel sensor modul. And its nothing. You can do mere with this then a screen can show 🙈
There are other options now... 10" digital dashes for $500
Great video and cool modification on the E36. LS is alway the answer ;)
Couple of questions: So you are able to tune - just like you would with the Holley screen - on the android? Or does the android simply act as a gauge cluster. Also - any way to bluetooth this to get rid of the wires?
It functions just like a laptop, but it would be hard to make adjustments on a small screen
Cool science.
Yea I lucked out here!
Thank you
No problem!
Is there a speedometer option on there?
There isn’t, but I think you could wire in a gps speedo I think for an input.
Did you ever get it to connect to a charger and connect to the Terminator at the same time?
I didn’t, my tablet gave out on me recently and I switched to a Tinkered Engineering display. But it definitely can be done.
1st like
Nice!
I have a question i have the same set up is there a way to check missfires or check engine health on this terminator?
Not that I’m aware of
Do you have to manually turn on your tablet each time you start your car?
Yes, but it’s not that hard, but I don’t always use it since I have my normal gauges
@@LowBoostFilms how hard was it to keep the stock gauges?
@@daytongriffin5103 easy, outside of the rpm gauge that gets wired through the Holley, everything works other than the mpg gauge. I disabled the coolant one it’s so inaccurate
I want to display this on an android radio in my is300 is this possible?
I don’t think so. You need windows
I AM PUTTING A SURFACE 3 IN WITH THE TERMINATOR X. I ALSO WANT TO USE THIS AS MY MEDIA CENTER, CAN I?
I don’t think so.
Can you run the set up wizard and run the tablet instead of the small 3.5” touch screen. I’m looking to order a terminator x without the small screen and just run a tablet. Is this possible?
Idk, I think everyone comes with the screen. It is very easy to set up on the little screen. After that you will need a laptop to do tuning.
It's fairly easy to set up via a tablet/laptop instead of the 3.5 inch..just ended up going through the process today. You don't really go through a set up wizard like you wouod with the 3.5 inch but instead you can upload a base tune similar to your setup and change a couple options like injectors and map sensor etc.
The amazon link is expired. What brand tablet was it you're using?
Any windows tablet will work. This is another one but a 10 inch. amzn.to/3L6Kdw6
How were you able to retain the stock gauges?
Most stayed the same outside the rpm which I tapped into from the ecu. Coolant did work but it was way off so i unplugged it
@@LowBoostFilms Do you by chance have a video of how you did this?
I have an e46 im trying to do the same thing, well sorta, got an LY6 but same concept. Good idea using the windows tablet, had the same idea using hp tuners with my surface pro.
I wonder if I can use the iPad instead of windows window that shits going to slow down in another year you’re better off just paying $700 in getting the best you can get
Terminator X software doesn’t work on Mac OS sadly.
Can you use the tablet for this and have a speedometer gauge on the screen as well and it work?
I haven’t tried to get the speedometer to work on they Holley so I don’t know if you can. I don’t need to because my stock one works.
@@LowBoostFilms ok thanks, i will probably try it, as i dont want to drop a grand on a pro dash honestly, running a t56 with a x max so i think if i put a speedo output in it may work. Love the car btw
You could also wire the speedo output on the t56 to the original dash, if you can’t wire it to the x max. My speedo signal comes from my differential on my bmw, so it works just as it originally did.
@@LowBoostFilms i would but its a 64 nova, so limited on space and no electric dash
Need the link to the cable that goes to the Intimidator to your 10 inch screen
amzn.to/3kog3HW
How do you keep the stock dash wipers and turn signals to work
They all work through the chassis harness, which I didn’t touch with the swap.
This car is so fn cool 😎
Thanks! I love it
How do you go about retaining the factory dash gauges ?
Outside of the rpm gauge. All the others were unaffected. The coolant I disabled because it’s not accurate for LS in a BMW
@@LowBoostFilmswhat are the factory gauges hooked too and getting their readings from?
@@bnkrdbones4391most not he factory gauges don’t need the ecu so they work untouched. Just needed a wire for the tach from the Holley.
Where's the link for the harnesses for the Intimidators
amzn.to/3kog3HW That’s the link to the data cable, you’ll just have to get a cheap USB to micro USB adapter
do you have a link for your micro split cable?
Here is a link to a different one. My wires have gotten a little lost So I wouldn’t recommend the exact one I have. amzn.to/3ltSz4n
Does this work for Sniper as well?
Yes it will
Do you have a updated site for the tablet
This one should work. It’s new though amzn.to/3I8VKIy
1969 LS RESTORE
Awesome!
Does terminator x work with iPhone?
It does not :/
Anyone check out Tinker Electronics screen? It's another alternative that you might like and want before you pay $$$ for Holley screen
I’ll check them out!
@@LowBoostFilms I saw you got the Tinker Electronics screen. Was that because of me? lol
@@ford9050 kind of! I looked it up and thought it was cool. Then when I had to update my tablet to Term X V2 I couldn’t get it to work anymore no matter what I did. So instead of getting a new tablet I got Tinker’s!
@@LowBoostFilms Yea those screens are so cool. I have another 10" waiting on order. Can't keep those in stock
@@ford9050 yea, I’m glad they’re making them!
This is nothing new, People have been doing it since the original Dominator came out and every ecu since.
Of course, but I got a lot of people ask how to do this so I figured I’d make a video