Такова у них условия работы, ужасающая картина , мы от такого рабочего цеха сразу же убежали! Дай Бог им здоровья , счастья и удачи ! (это в Пакистане или же в Индии наверное )
Молодцы ребята! Без защиты, без техники безопасности, без маски, без хорошего инструмента... прицеп весит больше трактора наверное, учитывая сколько металла в нем. Прицеп без тормозов, нет смазки на пары трения, никаких гарантий... В перемотке как миньоны😅
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
Они в конце просто приварили ось к раме? типа 3000 использованных электродов недостаточно, болты отстой, вари дальше. Судя по толщине и количеству металла штука эта не сено возить будет, при всем уважении, но дорог у них нет, этож ось отвалится за поворотом!
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
Owner was like "OK guys, this week we are supposed to build a tractor trailer. Tools are here and in the warehouse you have some 6 tones of steel." Workers: "Yes."
@@AKAtheA Yes, good point. The whole trailer was made out of literall scrap but may not be that bad thing since, as far as I know, most of metal available (per price) in Pakisatn, Bangladesh, Sri Lanka... comes from ship breakers that cut old ships and sell the metal. Since shipbuilding is quite regulated (it should be, I hope), steel quality should be relatively good (most of ships are built out of EN S355/ DIN St52-3 steel). The real issue is that, since they do not have metal available in standard dimensions (here in Europe steel beams in all forms are available in 6m (approx. 20 feet) or 12m (approx. 40 feet) they make beams for chasis by welding smaller pieces together to get to the desired length. Beam welding is not a bad thing (if done properly) but they definitely have way to many welds on main chasis and each weld zone is potentional crack zone. There are few design flaws / weak spots too. Connection between main chasis and axis is very weak for a trailer of this size, hinges connecting the lower and upper chasis are very weak too, lift mechanism is very crappy, movable parts with steel to steel contact under high load - it will wear in no time since there are also no lubrication/grease nipples.
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
As long as it runs well on the roads and the company feeds families, well done 👏 but for ISO 9001 we'll see later please. it's a pleasure to see you at work, it's a change from those mega factory shows on the documentary channels.
@@jemandjemand2362it's obviously standard Pakistan has so many companies working professionally in different sectors these are just street service providers across highways & heavy traffic roads to provide cheap work in immediate solution...
@@jemandjemand2362how come you jumped into this conclusion. They know ISO 9000,as well as, KAIZEN. The problem is those who have adopted these standards usually never allow these youtubers into their premises.
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb jbjj
fanstastique ces ouvriers bravo et quelle qualité du travail bravo combien de familles vont se nourir de cette construction plus que nos robots j'espére qui eux font vivoter le boys et qui offre au gros plein de fric tout le bénéfice
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
I give you guys credit. You made that with a limited amount of tools and equipment. I would like to see you have better face shields for welding to protect your eyes from the arc flash. It also would have been better to add some brakes to the trailer for better stopping under a load, rather than relying on the truck towing it.
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb jbjj
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
very impressed with their skill with what little they have, only thing not impressed with is the lack of grease fittings on the hinge points and pins...and not packing wheel bearings and lack of a grease cap for the hub allowing grit and dirt to enter the bearings.
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
Если эта телега по жизни будет стоять, а не ездить, то смысл в ней есть. А на ходу конечно разваливаться начнет. По виду тележка тонн на десять- пятнадцать.
@@georgyvahrushev3908 у них электродов и ржавого металла дофига, будут регулярно чинить тележку. И все будут заняты. У всех будет немного хлеба для детей. Так и будут жить веками...
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
Fully automated production line! In Pakistan the meaning is, that as soon as one of these poor guys were injured or killed on the job, the next one immediately jumps in.
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
Geito simples de fabricar mais muito bem caprichado muitas fábricas do meu pais tem todos os equipamentos modernos mais não consegui fazer algo igual a eles kkkk
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
Now that everyone has a mobile phone, it might be an idea for people who make these videos to go on UA-cam to see what safety is. This can be safety glasses, hearing protection, gloves, safety on tools and not least safety shoes. UA-cam also has videos where people can learn how to tie shoes, then sandals can be replaced.
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb jbjj
Your workers will lose their vision and contract skin cancer if you do not provide them with eye and skin protection. I watched several workers suffer burns to their hands during the video! Get them welding gloves and aprons. I know they are expensiive, but you will have to train new workers when they go blind, are seriously burned, or die from skin cancer. It will cost you more to train new workers and slow your production than the cost of some personal protection equipment. Protecting your workers' health is cheaper than retraining workers to replace the dead or injured ones.
It is not certain, the human is not taken into account in these countries, it is just a consumable that is replaced when it no longer works. It costs less to replace it than to equip it with protective equipment. and as for the training of new workers, seeing the quality of the work done, it's not super quality, but rather very basic, you just have to see the rust provided during construction, unthinkable in our factories or workshops.
@@harentroisthat's a sad reality in so many areas of the world. I watch alot of videos like this. You speak the truth about the lack of concern for human health and safety. It's crazy how many workers are barefoot or wearing sandals.
@@harentrois I agree with all except I wonder if your assesment that it costs less to replace a worker than to provide rudementary PPE is correct. In this setting It seems to me that it would cost more in lost production time to replace and train a worker than to provide him with a proper welding helment, welding gloves and leather apron and mandate long sleeved shirts. I understand work boots, or steel toed shoes and breathing apparatus are not happening. Those welders and helpers are blind men walking. One of them was staring into the arc as he was running the bead. The helpers were actually holding the work piece bare handed as it was being welded. Insane!
@@harentroisyou people have passed a very difficult time to reach present day status. Usually Western people hide their ugly faces. I saw old videos of their factories, people working in coal mines, chimney cleaning boys etc. Pathetic.
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb jbjj
What do you do here? What. What do you do here? WHAT? WHAT DO YOU DO HERE? I DO ALL THE GRINDING. Why does that man keep walking into the walls? Ohh, he’s our welder.
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb jbjj
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
Ah takes me out to my back yard while welding …..The old thongs haha smell of burnt flesh and jumping all over the place ..got to take your hat of to these fellas …they work with what they have ..from outback Western Australia 👍👍
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
I think that. 1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask. 2. They should use stronger solder, type 7018, 9018, 11018. 3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side. 4. For very serious jobs like these, it is necessary to apply the welding vertically upwards. 5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖.... 6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius) 7. There is no need to bend the electrodes. 8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles. 9. The entire piece should have some kind of tempering so that it does not bend so easily. 10. You can create a template or pattern to make the bevels with oxycut jjj
Все конечно хорошо но тежелая телега зазоры на заднем борту ,да и балка так неварется как минимум наискосок стык ,ещё бы им полуавтомат вообще было огонь а так уважение вашему труду
Босиком, без рукавиц, одна маска на сто человек! Вот это я понимаю!
Такова у них условия работы, ужасающая картина , мы от такого рабочего цеха сразу же убежали! Дай Бог им здоровья , счастья и удачи !
(это в Пакистане или же в Индии наверное )
Bugger you keyboard snow flakes,just think of what this team of gents could do with a little H@S and the correct tooling.
Cool
техника безопасности на высоте, не слышали, а где она , нету а на хрен она нужна , итак сойдет.
@@huseynrzayev9952Пакистан
Молодцы ребята!
Без защиты, без техники безопасности, без маски, без хорошего инструмента... прицеп весит больше трактора наверное, учитывая сколько металла в нем. Прицеп без тормозов, нет смазки на пары трения, никаких гарантий...
В перемотке как миньоны😅
Сварщик в простых очках ваще бессмертный что ль 😊
... может и бессмертный но в розыске ! 🧐🤪
Сварщик даже не смотрит что он там варит тыкает куда попало,😁😁,просто какой то пипец .
А почему сварщик в кроссовках а не в шлепках? Непорядок...
@@ЛизаХ-ф2л😂😂😂
@@Maks.88AS да ладно, а вы я так понимаю просто гуру сварки,мы тоже не лаптем щи хлебаем.Они как лепили горбатого так и продолжают.
Great Respect to these hard working men they done a great job making that trailer.
всё чётко и качество, аккуратно без люфта как немце ,молодцы так держать👍👍👍
Так они могут собрать ка 52 верталет
🤣🤣🤣🤣@@АннаШубина-н1й
Вот значит с кого "Миньонов" мультяшных срисовали! Рукастые мужики 👍
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
Сварщик, сварщик - парень настоящий! Сварщик, сварщик - электродов ящик! (с)
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
Those guys did an amazing job.
Respect, my friends.
They can make furniture out of a pile of shit.
бахрома на бортах и какие то висюльки сзади это в пакистанских ПДД где то есть требования по установке?
I really would like to know the age some of these welders are before they become blind? They are great workers but deserve some decent protection!
Eyrt8e37eutrwu
Seems that eye and foot protection is overrated at least in Pakistan.
Calling them welders is a stertch.
If there that stupid .so be it
)
Ассалаума-алейкум из Каракалпакстан ❤
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
Respect sir,,👍👍 love the way you People Are doing it
I like their safety, welding glasses and foot Wear really good
😂😂😂
Safety 1st👍
Ребята, берегите глаза, работайте в масках и защитных очках!!!! 🙏🙏🙏
бабы еще нарожают. они там как тараканы размножаются
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
शानदार ट्रेक्टर ट्रॉली ,बेहतरीन डिजाइन very good
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
@@RobertoParra-k8y idiot spammer
Форма на заводе у них классная! Специальная, сварочная , халат - вон какой длинный... шлепанцы сварочные!
Admiratif de ces hommes et de leur travails dans des conditions moyenageuse dans la bonnes humeurs bravos
Они в конце просто приварили ось к раме? типа 3000 использованных электродов недостаточно, болты отстой, вари дальше. Судя по толщине и количеству металла штука эта не сено возить будет, при всем уважении, но дорог у них нет, этож ось отвалится за поворотом!
трактор медленно возит.. наверное только поэтому.
троллейбус рассчитан только на одну поездку.😉
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
Not only did they build a chassis by welding three different pieces, but welded the trailer axle on it too.
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
Pakistanis are serious metalwork guys ....
After watching the whole thing...I would have liked to see it painted & functioning!! JS
Owner was like "OK guys, this week we are supposed to build a tractor trailer. Tools are here and in the warehouse you have some 6 tones of steel."
Workers: "Yes."
*6 tons of steel scrap :D
@@AKAtheA Yes, good point. The whole trailer was made out of literall scrap but may not be that bad thing since, as far as I know, most of metal available (per price) in Pakisatn, Bangladesh, Sri Lanka... comes from ship breakers that cut old ships and sell the metal. Since shipbuilding is quite regulated (it should be, I hope), steel quality should be relatively good (most of ships are built out of EN S355/ DIN St52-3 steel). The real issue is that, since they do not have metal available in standard dimensions (here in Europe steel beams in all forms are available in 6m (approx. 20 feet) or 12m (approx. 40 feet) they make beams for chasis by welding smaller pieces together to get to the desired length. Beam welding is not a bad thing (if done properly) but they definitely have way to many welds on main chasis and each weld zone is potentional crack zone. There are few design flaws / weak spots too. Connection between main chasis and axis is very weak for a trailer of this size, hinges connecting the lower and upper chasis are very weak too, lift mechanism is very crappy, movable parts with steel to steel contact under high load - it will wear in no time since there are also no lubrication/grease nipples.
Туда только электродов тонна ушла
Эти люди могут все в жазни!!! ❤
Варить без сварочной маски! А вы попробуйте!
@@ИванМихаилов-у2ж я и говорю! Эти люди могут все! В молодости бывало варил без маски, теперь глаза болят...
А ещё излучение от сварки рак кожи вызывает, как и при ядерном загаре!
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
They'll overload it like they do everthing else !
It will be good for 30 ton that trailer..😆😆😆
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
Металева «тасьма» на цьому напівпричіпі це окремий вид мистецтва 😂😂 вага цього чуда певно 10 тон порожнім
Да, без тесьмы не пройдет техосмотр
As long as it runs well on the roads and the company feeds families, well done 👏 but for ISO 9001 we'll see later please. it's a pleasure to see you at work, it's a change from those mega factory shows on the documentary channels.
Il. Concetto. E'. Giusto.... gran. Esperienza.....💪✋👍👀🇮🇹🇮🇹🇮🇹
they dont even know what ISO 9001 means
l ıake you comment- bravo ! Thank you!!
@@jemandjemand2362it's obviously standard Pakistan has so many companies working professionally in different sectors these are just street service providers across highways & heavy traffic roads to provide cheap work in immediate solution...
@@jemandjemand2362how come you jumped into this conclusion. They know ISO 9000,as well as, KAIZEN. The problem is those who have adopted these standards usually never allow these youtubers into their premises.
Даже смотреть на это больно...
Сделайте что-нибудь еще.
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
Very good brother
Good work and good team.👍👍
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
У сварщика в черном халате самая профессиональная сварочная маска , а так у них кто держак взял тот и сварщик !
Вероятно у него и халат из негорючки, в отличии от других
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb jbjj
❤puros chambeando res , bendiciones todos ❤
fanstastique ces ouvriers bravo et quelle qualité du travail bravo combien de familles vont se nourir de cette construction plus que nos robots j'espére qui eux font vivoter le boys et qui offre au gros plein de fric tout le bénéfice
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
Sad about no safty but I love how they recycle. I always seem to come
Home with more metal then I take to scrap yard for projects.
Солнцезащитные очки вместо сварочной маски?
Nice || safety first 😊
Mashallah, ما شاء الله
Saludos al broder y al Chuchin! Echándole ganas como 100pre.
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
Vous êtes des génies de la construction métallique 💪🚚🙏🏽
\\
Union workers like the highest quality product with osha approved methods.
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
Быстро качественно ,,,,менеджеров нет
Muchas Felicidades Joven Por Su Canal.
Saludos Cordiales Desde Mazatlán, Sinaloa, México.
Remolques JJV NORTHSTAR
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
кто , среди этих уважаемых Господ , начальник ОТК ??
Ниче сё, ни одной заклёпки а только сварка 😮
Excellent well done I congrats 😂😂😂😂😂😂😂😂😂
I agree with com.en.s 132 I was17 don.ing work like that back 78 I'm 61 now and still working .work and sandos your life
I give you guys credit.
You made that with a limited amount of tools and equipment.
I would like to see you have better face shields for welding to protect your eyes from the arc flash.
It also would have been better to add some brakes to the trailer for better stopping under a load, rather than relying on the truck towing it.
CRAFTSMAN AT ITS BEST, wish them luck and maybe some PPE wouldn’t hurt
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
Kid welding with prescription glasses looking straight at the arc must not like his eyesight...
Nise😊
You know it's a quality build when the frame rails are scabbed to length
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
There is a looong way to precise machining... the one where straight lines, right angles and any predefined tolerance are important.
and they're not going that way, as what they make seem to be 'good enough' for it's customers and price class
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb jbjj
luar biasa dan terbaik saudara, salam dari indonesia 🇮🇩🇮🇳
Pakistan itu bukan india
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
Фиксики )))))
very impressed with their skill with what little they have, only thing not impressed with is the lack of grease fittings on the hinge points and pins...and not packing wheel bearings and lack of a grease cap for the hub allowing grit and dirt to enter the bearings.
OH Dear.
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
Тонн пятьдесят, надо полагать, в эту телегу точно навалят.
Если эта телега по жизни будет стоять, а не ездить, то смысл в ней есть.
А на ходу конечно разваливаться начнет. По виду тележка тонн на десять- пятнадцать.
@@georgyvahrushev3908 у них электродов и ржавого металла дофига, будут регулярно чинить тележку. И все будут заняты. У всех будет немного хлеба для детей. Так и будут жить веками...
11:14 Вы не правильно делаете, надо перед работой снять защитный кожух с болгарки!
100%
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
잘 보고 갑니다...^^
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
Fully automated production line!
In Pakistan the meaning is, that as soon as one of these poor guys were injured or killed on the job, the next one immediately jumps in.
Share with us your way of automated production........ Preferably on your channel.
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
@@RobertoParra-k8y That will probably happen in the next millennium.
Priority is inventing chairs, tables, workbenches and, of course, toilet bowls.
подвеска,? не, не нужна, все равно мы больше 50 тонн не грузим, чтобы по серпантину с двумя прицепами разминаться удобно было.
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
Geito simples de fabricar mais muito bem caprichado muitas fábricas do meu pais tem todos os equipamentos modernos mais não consegui fazer algo igual a eles kkkk
В какой стране ты живёшь?
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
Now that everyone has a mobile phone, it might be an idea for people who make these videos to go on UA-cam to see what safety is. This can be safety glasses, hearing protection, gloves, safety on tools and not least safety shoes. UA-cam also has videos where people can learn how to tie shoes, then sandals can be replaced.
Szerszámokbòl pont hogy a békebeli a jò! Nem pedig a dizájnos nagyáruházas vacak!
Подвеска,нет,не слышал 😢
а что это такое...
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
Esses caras vão dominar o mundo
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
اول مرة اشاهد عمال من الهند يعملون بالموسيقى ولا يرقصون 😂😂😂😂😂😂
یہ لوگ پاکستانی مزدور ہیں۔
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb jbjj
Your workers will lose their vision and contract skin cancer if you do not provide them with eye and skin protection. I watched several workers suffer burns to their hands during the video! Get them welding gloves and aprons. I know they are expensiive, but you will have to train new workers when they go blind, are seriously burned, or die from skin cancer. It will cost you more to train new workers and slow your production than the cost of some personal protection equipment. Protecting your workers' health is cheaper than retraining workers to replace the dead or injured ones.
It is not certain, the human is not taken into account in these countries, it is just a consumable that is replaced when it no longer works. It costs less to replace it than to equip it with protective equipment. and as for the training of new workers, seeing the quality of the work done, it's not super quality, but rather very basic, you just have to see the rust provided during construction, unthinkable in our factories or workshops.
@@harentroisthat's a sad reality in so many areas of the world. I watch alot of videos like this. You speak the truth about the lack of concern for human health and safety. It's crazy how many workers are barefoot or wearing sandals.
@@harentrois I agree with all except I wonder if your assesment that it costs less to replace a worker than to provide rudementary PPE is correct. In this setting It seems to me that it would cost more in lost production time to replace and train a worker than to provide him with a proper welding helment, welding gloves and leather apron and mandate long sleeved shirts. I understand work boots, or steel toed shoes and breathing apparatus are not happening. Those welders and helpers are blind men walking. One of them was staring into the arc as he was running the bead. The helpers were actually holding the work piece bare handed as it was being welded. Insane!
@@sunny71169 No wonder they have to curse their god minimum 10 times a day.
@@harentroisyou people have passed a very difficult time to reach present day status.
Usually Western people hide their ugly faces. I saw old videos of their factories, people working in coal mines, chimney cleaning boys etc. Pathetic.
It amazes me that this is speeded up but the workers look normal.
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
Подвеска? Какая еще подвеска?
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
Fair play, made that with crude tools.
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
Wir sollten alle etwas Geld spenden und den Arbeitern ein Hallenkran spendieren
Амазинг😅 просто нет слов, авсë уйня главное бахрамушки😂
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb jbjj
What do you do here? What. What do you do here? WHAT? WHAT DO YOU DO HERE? I DO ALL THE GRINDING.
Why does that man keep walking into the walls? Ohh, he’s our welder.
Got to watch these videos with my toes curled up lol
One fellow had shoes on!!
lo sullo son maquina seguro 📸📸📸📷
All the steel looks like ship super structure those people srap them make sense recycling
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb jbjj
Мост приварили??)))) 😊
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
I’m speechless. They all have apple I phones yet are producing a death trap.
I think the tail gate is the wrong side in. Wouldn't the smooth side go inside the box.
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
Ah takes me out to my back yard while welding …..The old thongs haha smell of burnt flesh and jumping all over the place ..got to take your hat of to these fellas …they work with what they have ..from outback Western Australia 👍👍
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
Прицеп без тормозов,но з красотой.
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
Good 👍
很厉害，用简陋的工具就制作出产品
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼✨👊🏼🕶show!!!..Parabéns A EQUIPE!!..
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
عماله شغاله بجهد في أعمال خطيرة بدون دسوس وأكثرهم بدون حماية لحام
27:30 Sidhu Moosewala Panjab ❤
Parabéns..um trabalho muito bem feito
Ни я йп
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
Respekt für die Arbeit
Eine Mischung aus 12. und 19. Jahrhundert.
Die meisten Arbeiter krepieren schon nach kurzer Zeit oder landen als blinde Bettler in der Gosse.
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj hhjb
En estos trabajos no se puede ir en chanclas es una temeridad
Правильно, пусть босиком ходят
Подвеска вообще дикая!!!где рессоры?все что наварили отлетит при первой нагрузке и поездке по кочкам!😂
На 6.46 мастер йода нервно курит за углом
the man in grey it's the 1st in india with semi DPI
Сколько тонн эта телега может возить,
نظارات حماية من اللحام جداً جدا جدا خطير
Kid with the glasses is going to go blind real quick
I think that.
1. They should use better personal protective equipment: gloves, boots, welding helmet, leather apron and mask.
2. They should use stronger solder, type 7018, 9018, 11018.
3. They must make bevels for welding and leave space between the pieces (1/8) so that the pieces stick or adhere correctly. And even more so when it can only be welded on one side.
4. For very serious jobs like these, it is necessary to apply the welding vertically upwards.
5. For jobs as serious as these, it is necessary to apply the welding beads alternately: at one, at six 🕕, at nine 🕘, at three 🕒... At two 🕑, at seven 🕖....
6. For jobs like these it is necessary to preheat the area where you are going to solder a little (60 degrees Celsius)
7. There is no need to bend the electrodes.
8. For jobs as delicate as these, it is better to apply the solder in letter (C) movements or in circles.
9. The entire piece should have some kind of tempering so that it does not bend so easily.
10. You can create a template or pattern to make the bevels with oxycut jjj
Tuti kényszerìtve vannak!
Все конечно хорошо но тежелая телега зазоры на заднем борту ,да и балка так неварется как минимум наискосок стык ,ещё бы им полуавтомат вообще было огонь а так уважение вашему труду
Если им полуавтомат дать так они из и в Россию поставлять начнут 😂
Когда-то это видимо был забор у кого-то.
Телегу надо проваривать пол дня. Шоб не развалилась. 😅
@@Анеботакоеже Это тебе не Автоваз , болты не забивают кувалдой ...
@@Bosjak63 какой алковаз?
Пакистан основная мировая разборка морских судов. Оттуда скорее всего б.у. металл
Good👍💯💯💯💯💯💯💯💯💯
Супер 👍🔥