taught a old dog a new trick , remove the screw on throttle and tape the bar . good show ! got those cable tightihg plyeirs , i recomend them they're easier and cheap on amazon.
I actually just bought this exact identical bike! Harbor Blue paint! Along with a BBR stage4 66cc motor........ It's gonna be sweet! Thanks for the video!
I watched a video the other day that stated that, The chains don't actually stretch, But that the sprocket will ware down over time. And thinking about it I have never had to change out a chain on a regular bike, Unless the sprocket damaged it in some form. So I think the chain stretching thing might just be right. And they don't stretch. Just something to think about. I liked the video though, Very insightful and easy to follow along with. Nice work and nicer bike.
Man I really appreciate this video. It really shows in glaring detail how cheesy this is. I mean just look at the welds on the tank. And that 4 bolt mounting for the engine is really poor. And I like how you point out how fragile the controls on the handle bar are. There's NO WAY I'm buying THAT!!!
I Bought 2 of them screaming demon v2 bicycle and both had a hole in the gas tank they wouldn't exchange for a new one one hadn't ever had gas in it yet just gave me a little money back on both had to use tank sealer to fix both now they've had my front forks because the adjustment knob wasn't working properly on one they've already had them for 2 weeks giveing me every excuse except replacing them they said they don't have spare parts I told them just pull one out of a new box and send it still waiting hopefully yours doesn't have a pin hole in the tank on the second one it took about two to three weeks before it started leaking from a weld but nice video like the bike's don't like there way of honoring the warranty
@@MotoredLife the first one was on the weld where the lower tube meets the gas tank the second one on the right side where the tank is welded to the tube for the forks I noticed it because the paint started discoloring if you do find one have no fear drain it wash it out with dawn dish soap about 3 times once with acetone let dry won't take long then red coat about half a can rock gently coating the surface drain excess let dry for 24 hour and repeat the red coat sealer and you are good to go
I just got this bike and I have way more pieces than what you're showing goes with the fork does anybody know what all these extra pieces are I've got nine total not including the bolt in the top piece
Was just Putting this Bike together with the Zeda 80. The Muffler is in the Way of the Pedals an eighth of an inch. Would You Possibly know Why? I Put the Two Rubber parts between the engine and frame.
why is my motor bike not working it turns on and the throttle doesnt work only while clutch is engaged then i can rev it up, the first problem was that the carb wasnt tight so i put a hose clamp on it, its still not working, and it sounds like its gonna break, the whole thing rattles, ive watched everyvideo therre is out there
i started 68cc motorbikes, now im building motorcycles, but i still love building motorbikes now and then 😎👍
Very informative video and I especially like your upbeat style with no manufacturer bashing.
taught a old dog a new trick , remove the screw on throttle and tape the bar . good show ! got those cable tightihg plyeirs , i recomend them they're easier and cheap on amazon.
I actually just bought this exact identical bike! Harbor Blue paint! Along with a BBR stage4 66cc motor........ It's gonna be sweet! Thanks for the video!
They just stocked the new Zeda Dawn V2 btw :) looks so nice and a bit stronger build all around.
Yeah I love the felts
Nice up to date “How To”!! Hyped on it!!
I watched a video the other day that stated that, The chains don't actually stretch, But that the sprocket will ware down over time. And thinking about it I have never had to change out a chain on a regular bike, Unless the sprocket damaged it in some form. So I think the chain stretching thing might just be right. And they don't stretch. Just something to think about. I liked the video though, Very insightful and easy to follow along with. Nice work and nicer bike.
Man I really appreciate this video. It really shows in glaring detail how cheesy this is. I mean just look at the welds on the tank. And that 4 bolt mounting for the engine is really poor. And I like how you point out how fragile the controls on the handle bar are. There's NO WAY I'm buying THAT!!!
Thanks for watching!
I Bought 2 of them screaming demon v2 bicycle and both had a hole in the gas tank they wouldn't exchange for a new one one hadn't ever had gas in it yet just gave me a little money back on both had to use tank sealer to fix both now they've had my front forks because the adjustment knob wasn't working properly on one they've already had them for 2 weeks giveing me every excuse except replacing them they said they don't have spare parts I told them just pull one out of a new box and send it still waiting hopefully yours doesn't have a pin hole in the tank on the second one it took about two to three weeks before it started leaking from a weld but nice video like the bike's don't like there way of honoring the warranty
Oh no i'm sorry to hear that!
Where should we look for the holes at?
@@MotoredLife mine showed up on the welds
@@mikemiller3303 any particular side?
@@MotoredLife the first one was on the weld where the lower tube meets the gas tank the second one on the right side where the tank is welded to the tube for the forks I noticed it because the paint started discoloring if you do find one have no fear drain it wash it out with dawn dish soap about 3 times once with acetone let dry won't take long then red coat about half a can rock gently coating the surface drain excess let dry for 24 hour and repeat the red coat sealer and you are good to go
@@mikemiller3303 gotcha thanks!
Cool man you know all the little tricks to get these together. Great video! Thanks.
Hey no problem always here to help!
Make sure you share with your friends it helped them and the channel. Thanks again 👊👍
Awesome Alex !!!!
Have you ever tried to put a kickstart on any of your builds?
Hi , i just bought a bike berry kit 26 inch bbr 80cc ,came with no info on how to install the forks can you help
I like how you put the engine chain on the engine sprocket without taking the cover off, 21:28
I feel so stupid, i always take the cover off
I have every piece you have but your number 5 piece, I have one that is much deeper. Would you know where it goes or what it is?
so.. how to switch out the rear gear or something to make it go max 12-15mph?
I just got this bike and I have way more pieces than what you're showing goes with the fork does anybody know what all these extra pieces are I've got nine total not including the bolt in the top piece
Vende essas roda no brasil
what a bike op
Hellz ya nice bro
rims are good
Yo bro where u been, when u doing the video of the phantom 85cc build and ride ???? Or just a ride review
The one I had broke! Also I got hit by a car been out for awhile lol
Was just Putting this Bike together with the Zeda 80. The Muffler is in the Way of the Pedals an eighth of an inch. Would You Possibly know Why? I Put the Two Rubber parts between the engine and frame.
Dont use the rubber things!
@@MotoredLife Thanks! Will Do. Now it Seem the sprocket on the Motor Doesn't line up With the rear
Hey Alex
How much I need threewhel
The only frame I wouldn't use unless you cut that motor mount off.
why is my motor bike not working it turns on and the throttle doesnt work only while clutch is engaged then i can rev it up, the first problem was that the carb wasnt tight so i put a hose clamp on it, its still not working, and it sounds like its gonna break, the whole thing rattles, ive watched everyvideo therre is out there
@@crustysniffers try turning up your idle screw once you confirm the carb is tight and sealed
@@MotoredLife Thank you, it worked. appreciate it.
That's ur life on the road check ur front tire
What's up with all the reload are we missing something
I was just trying that though too
Technical difficulties! Mainly the first one was the wrong video in the second immediately got hit for a copyright claim
@@MotoredLife oh okay great video by the way .
@@darrinfry2251 thanks bud! I made this to share with all of the beginners.
@@MotoredLife looks like a nice “stock kit” ⚙️🚲⚙️