Just came across one of these on my ignition I only have a orange with yellow chaser wire, and a full orange wire and the black and white wire that you cut there which orange wire should I cut
Hey wisco! So i buy a new ignition switch for my mutilated 98, it’s supposed to have a 100ohm resistor built in. My black and white is disconnecting from the switch currently(cut) when i turn key on the gauges light up and bike turns over (fuel pump and some other stuff is disconnected) getting no spark. So i splice black and white wire to black and white wire and it pops the ignition fuse. I am not sure how to go about this. From what I read on forums they are saying ecu is fried or rectifier.
I have an 06 gsxr 1000 having a problem with no spark. first it would run fine then just die, let sit for a while and would start back up. it would be fine for a few days then just die again. that went on for a month or so, then it started happening more often. now it has no spark at all. driving myself crazy trying to figure it out. if you could give me some ideas i would very much appreciate it.
@@pmagana8244 im sure its something simple. Dont know much about new bikes but there all pretty easy. Just do your tests and take it one thing at a time.
@@ATCAdventureland thanks bro it was my generator fuck i took the whole bike apart but finally running the wire was cut inside the cover. Ur videos helped out thanks
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Just came across one of these on my ignition I only have a orange with yellow chaser wire, and a full orange wire and the black and white wire that you cut there which orange wire should I cut
What kind of bike was this
Hey wisco! So i buy a new ignition switch for my mutilated 98, it’s supposed to have a 100ohm resistor built in. My black and white is disconnecting from the switch currently(cut) when i turn key on the gauges light up and bike turns over (fuel pump and some other stuff is disconnected) getting no spark. So i splice black and white wire to black and white wire and it pops the ignition fuse. I am not sure how to go about this. From what I read on forums they are saying ecu is fried or rectifier.
on a ebay ignition what two wires do i need to put the resistor on on a ebay ignition
I have an 06 gsxr 1000 having a problem with no spark. first it would
run fine then just die, let sit for a while and would start back up. it would be fine for a few days then just die again. that went on for a month or so, then it started happening more often. now it has no spark at all. driving myself crazy trying to figure it out. if you could give me some ideas i would very much appreciate it.
I would check for corroded/melted electrical plugs. Dont know much about the newer gsxrs.
Hey bro can u help me out with my 03 gsxr 600 not starting just cranks
@@pmagana8244 im sure its something simple. Dont know much about new bikes but there all pretty easy. Just do your tests and take it one thing at a time.
@@ATCAdventureland thanks bro it was my generator fuck i took the whole bike apart but finally running the wire was cut inside the cover. Ur videos helped out thanks
Have u solved this problem ? I have the exact same
Hi i have all key lost gsx 2006 .can you help me about it?
Will a 110ohm resistor work
Can you do the fuel line and gas tank video
@@sevaslee4865 sold that bike ages ago.
@@ATCAdventureland thankz tho
On my bike the black wite wire has.ooo1 volts
Does this have to be done to ignition side or can it be done to harness side
Doesnt matter. I did the ignition side so i didnt have to chop up my bike harness.
I need help mind not spraying