How to Change Spark Plugs in Mercedes-Benz C300 W205 W206 and E300 W213
Вставка
- Опубліковано 3 лип 2024
- How to Change Spark Plugs in Mercedes-Benz C300 W205 W206 and E300 W213
Mercedes-Benz How-To videos: • Mercedes-Benz How-To v...
OEM spark plugs: NGK SILZKFR8E7S : amzn.to/3wQ6yGZ
Spark Plug Socket: amzn.to/3llXA24
Socket Extension Bar: bit.ly/3jFRlWz
Deals & my Gears on Amazon: www.amazon.com/shop/hummansunson
Disclosure: As an Amazon Associate I earn from qualifying purchases
How to Change Spark Plugs in Mercedes-Benz C300 W205 W206 and E300 W213
In this video I show step by step process to replace spark plugs in Mercedes-Benz C300 W205 and E300 W213
- Let engine to cool down before removing engine cover
- Remove two bolts with T27 torx bit
- Pull out Spark Plug Connector and Ignition Coil pack
- Blow out any dirt and dust from the spark-plug hole using compressed air
- Using 14mm socket and socket extension remove Spark Plug
- Use both hands to keep socket and extension along spark plug direction - do not tilt
- Install new spark plug OEM spark plugs: NGK SILZKFR8E7S
- Spark plugs from the dealer are pre-gapped but you can check to make sure it is to specs for your vehicle (for my C300 0.8 mm/0.032 in)
- Finish tightening to your vehicle torq. Spec I'm tightening to 18 ft-lbs for my C300
- Apply Dielectric Grease to sealing lip of spark plug connector
- Reconnect connector and coil to spark plug and Reinstall 2 bolts. Finish tightening bolts to 10 Nm
- Repeat the same steps for 2nd and 3rd spark plugs. Before changing last spark plug I suggest to remove the following bolts to have more room to work with
- Reinstall distribution module three bolts and Reattach wires
- Reinstall engine cover
0:00 Introduction
0:06 Let engine to cool down before removing engine cover
0:18 Remove two ignition coil bolts with T27 torx bit
0:57 Pull out spark plug connector and ignition coil
1:18 Blow out any dirt and dust from the spark-plug hole using compressed air
1:28 Using 14mm socket and socket extension remove spark plug
1:45 Use both hands to keep socket and extension along spark plug direction - do not tilt
2:50 Install new spark plug
3:10 Finish tightening to 18 ft-lbs
3:34 Apply Dielectric Grease to sealing lip of spark plug connector
3:57 Reconnect connector and coil to spark plug
4:23 Reinstall two coil bolts
4:56 Finish tightening bolts to 10 Nm
6:13 Detach wires to have more space to work with
9:00 Finish tightening bolts to 10Nm
9:10 Reinstall three bolts
9:25 Finish tightening to 10Nm
9:29 Reattach wires
9:41 Reinstall engine cover
Disclaimer: This video is for entertainment purpose only! NewRoad assumes No liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Please consult your qualified auto technician - Авто та транспорт
Mercedes-Benz How-To videos: ua-cam.com/play/PLLoEAO8f1zNwqR2KEyXCjGCkuOrxGGNfL.html
I used a vacuum before removing the spark plugs, it helps to clean all the sand and debris.
Edit:
I just finished replacing the plugs and I believe compressed air or a combination of both is the best option.
This is a great video. Very well done 👍🏽! Thank you so much 😊
Glad it was helpful!
Really well done video, thank you!
Made it look easy. I don't have the tools like you so I will take it to a mechanic
Yes, it is easy - but you are right, you need tools to do this job
Good VDO, nice works
Excellent video, thank you
Great work. Thank you.
Thanks for watching!
Thank you for this. Super easy.
Glad it was helpful!
Fantastic video.
Thank you very much!
Epic 🎉 thank you 🙏
Are the cylinder numbers front of engine to back 1-4
How do I change the coil pack on a c300 4 matic 9:52
The stealership wanted $1,100 to do this job. 😂
No thanks! I just bought the plugs and did it myself. Kept $1,000 in my pocket.
Thank you for the vid!
Awesome, glad it was helpful
thanks for the video - I have a 2017 C350e PHEV - do I need to disconnect the 12V battery before doing this job?
Yes, you might want to disconnect - but you will loose setting, seat, radio, etc...
Great video!
Same process for w213 E220 d?
Changing sparkplugs on your diesel could be a little more difficult
Please make a video about installing bov spacer on w205. I love the sound but i doubt it’s safe or not for the engine durability
I am not a big fan of that sneezing sound 😂
Hello ! Have hade a Weistec VTA valve for 2.5 years no issues
Wow really thanks
I have a question
Do i have to use obd2 scanner before or after install spark plug??
Or just install that and finish??(no other operation?)
I want that your channel forever
Just install, no need to reset anything
No, just replace it, you don't need to reset anything
My 2017 c300 coupe comes gap at .028
Old sparks look rusty, is there some way to safely clean those deep sockets before introducing new sparks?
You can blow air and vacuum before removing old spark plug to make sure dust and particles are removed
Hi , could you please show me how can i check power steering fluid in W205?🙏🙏🙏 thanks
It has Electric Power Steering - no fluid required
@@NewRoad thanks man 🙏🙏🙏
Same as checking the turn blinker fluid... 😉
I was looking for info on the C300. It would have been beneficial if this DIY video actually had something to do with the C300. Sure, spark plugs are replaced in a similar manner however, the process is bit different for a 3.5L. Also, there is no warning about using air tools to do this type of maintenance. Joe DIY sees air tools being used and might just assume that it is okay to use air tools to perform the whole procedure. It is definitely not a good idea to use air tools on ignition components.
What year is your C300?
Is this the same process for a 2014 e350?
Should be the same
Do you need anti seize on threads? Will it help when taking them out?
It doesn't hurt - but you don't really need it for new plugs/models
What torque settings for the bolts?
should be in the video
please how do you know the plugs you are buying are original ?
I checked specs and when I removed old ones I checked and it matches NGK SILZKFR8E7S: amzn.to/3wQ6yGZ
Have about 37k 3.5 year old e300 still oe plugs on it .. is it worth doing this at this age and miles? Vs waiting for 50k+ miles? 5+ years age?
Here is the video that may help you to decide: ua-cam.com/video/vHhqcs2SJKQ/v-deo.html
How important is the torque if u dont have any at home?
for these non moving parts. I dont think the torque is very important. hand tie those bolt but dont apply too much force. It might break the plastic parts.
Do we need to worry about them facing injectors?
German engineering - we just follow their design and maintenance
Can you please upload w205 engine belt replacement
Will do as soon as I create vid.
Felt any difference after installed ?
Not really, since I keep up with all maintenance
If you change very old ones you will notice the car idles smooth and doesnt drops rpms under load like AC while in drive at red lights, also gets a bit better fuel mileage.
how do you take the coil off so smooth? I see others having hard times and even breaking them
If yo maintain it all the time - should be easy to remove. A proper direction and little wiggle - but NOT excessive to prevent braking
Reason why you didn't use anti seize on the plugs.
If I recall correctly - those plugs didn't need anti seize [manufacturer did not recommended]
What do dielectric grease
it sealing out moisture and preventing corrosion