I have the same kit on my x3 and they are real nice, but jus keep sn eye out on the jam nuts they tend to back off on the hub side, i go over mines every 3-4 rides🤘🏻🤘🏻
@@GoTimeUTV also due the shock therapy toe link support since u are their jus for a lil extra in the hub side, plus also small lil tip, remove the lower bolt on the trailing arm and the stabilizer link to make it easier working on the raduis rods
Luckily I did do the TLS kit 🙌 and I probably need to figure out an easier way to install the radius rod plate that was the hardest part. Also thanks a lot for that type of feedback it really does help 👍
They must have made changes to the radius rods. I had the zrp plate and it wouldn't work the LM arms i put on a while back. The machining on back of plate caused interference with middle arm...so i ordered LMs plate and go to go.
Great vid man! I wanna do the Lmutv arms too! Keep up the channel brah🤙🏽
Arizona Shop local!!!
Thanks man I really do recommend it as a must do upgrade. Thanks for watching 👏
@@GoTimeUTV you have 72" or 64"
I have the 72in
I have the same kit on my x3 and they are real nice, but jus keep sn eye out on the jam nuts they tend to back off on the hub side, i go over mines every 3-4 rides🤘🏻🤘🏻
Hell yeah man. It's crazy how it makes the can am look 100x better. Thanks a lot for the tip. I will for sure keep an eye out on the jam nut
@@GoTimeUTV also due the shock therapy toe link support since u are their jus for a lil extra in the hub side, plus also small lil tip, remove the lower bolt on the trailing arm and the stabilizer link to make it easier working on the raduis rods
Luckily I did do the TLS kit 🙌 and I probably need to figure out an easier way to install the radius rod plate that was the hardest part. Also thanks a lot for that type of feedback it really does help 👍
They must have made changes to the radius rods. I had the zrp plate and it wouldn't work the LM arms i put on a while back. The machining on back of plate caused interference with middle arm...so i ordered LMs plate and go to go.
Really, they bolted up fine but I haven't tested them so I will have to keep an eye out on that
What are the torque specs for the six lug nuts
For the 6bolts on the radius plate it's 77
Just ordered mines..
Nice 👍. It's an upgrade that a lot off ppl ask me about
how are these holding up for you? I have had a set for 1,000 miles and all 12 rod ends are absolutely trashed.
Really mine are still looking good I'm also around the 1k miles with them. I do check them often I think I had to tighten them once