amazing stuck injector removing in
Вставка
- Опубліковано 20 бер 2024
- stuck injector removal,stuck injector,injector removal,how to remove stuck injector,injector,diesel injector removal,diesel injector,stuck diesel injector,injector puller,how to remove a diesel injector,injector remove tool,injector removal tool,stuck diesel injector removal,seized injector removal,crdi injector remove puller,injector opel 1.7 cdti,fuel injector testing,seized injector,injector cleaning,fuel injector,six cylinder diesel engine piston fitting,pistton fitting,piston,how to install piston rings,six cylinder diesel truck engine ka head ma piston ke fitting,diesel engine piston fitting,six sylinder diesel engine,six cylinder diesel engine,diesel engine,6 cylinder diesel engine,six sylinder diesel truck engine ka head ma piston ke fitting,valve adjustment,rebuilding engine,cylinder sleeve installation,engine,engine restoration,how to rebuild an engine,engine rebuild
- Авто та транспорт
Sprinters injectors are either really stuck or come loose while driving. Never in between.
100% agreed.
Or Ford 5.4 spark plugs 😭
As benz tech i can only agree 😂
gotta love that 2000psi fuel rail system lol its so high pressure once they leak they hydraulically cut through the head where the crush gasket sits never to function as intended again. best worst engine they've ever made..
Esattamente
Pulling it out under an angle doesn't work better 💀
Was thinking the same thing. Good way to snap the end of the injector off and then you are really having a good day.
😂😂😂😂
So what you’re saying is he doesn’t need to be standing on top of that car like a giraffe 🦒 😂
@@calebkeohan8 sort off 😂😂😂😂
It's a rough day when you gotta pull start the minivan. 😅
Господа, если это форсунка спринтера - прогрейте двигатель, и вытягивание на горячую в ЛЁГКУЮ.
I can see this ending badly for his jawline
Тот самый момент когда хозяин сервиса экономит на спец инструменте
Чтоб это не было это
Нужно 50тисяч км заменит шайбы под форсунки!☝🏼
это не шайба держит. алюминиевые стенки прикипают к форсунке. Попадания влаги, коррозия, может адгезия, может электролиз.
@@MrFugison разность материалов
@@maestroandrey8908 с современными электрическими форсунками эта проблема стала очень заметна. На форсунки подаются импульсы от 70 до 100 вольт, поэтому мне кажется при попадании влаги возможно и электролиз немного происходит. Головка сидит на массе, а от утечек в том числе магнитных уйти не возможно.
На кайроне такая хрень с 4й фарсункой, ее лучше смазать графитовой смазкой.
Старые немецкие дизеля были намного надёжнее.......
Это спринтер 2001-2005, у меня такой 2,2 cdi прошёл 1,2млн и я его продал, и новый владелец ещё проедет столько же если на масле экономить не будет и турбину с насоса и обслуживать, куда надёжнее?
Feed it some break clean and turn the motor over a few times. It'll pop out.😂
Injector Not to be seen again 😂😂
Mach das mal bei einem Auto welches 20 Jahre alt ist und noch die ersten Injektoren hat! Am besten noch mit 300.000km
@@kevinscherzinger2726 Vw t5 2.0tdi lässt grüßen 😂😂
@@kevinscherzinger2726chyba 1300000km🤣🤣🤣
@@djrigga Injector? I barely know her!
Мы так один раз головку выбили. Вместо форсунки 😂
Соосность соблюдать нужно когда выбиваешь..
This is why I am no longer a mechanic. Jobs like this are never appreciated.❤❤❤
Me too
you dont do your job for attention lol you do what ur passion is
@@greenespirit4973👌🏽💙
@@greenespirit4973that’s what I’ve been saying for years. Just because you were a mechanic before doesn’t mean you should of been one. Appreciate your profession, not what others think or tell you what to do. Also appreciate the work you done yourself! Not have Jim bob give you the worst advice about how you can do things better
Appreciated like they don't pay enough for this
На самом деле мерседес надо просто открутить крепёж и ездить пока не выплюнуло само...
Lmao
@@Thumper2Kewl shljamBur?!....
А если уже не работает двигатель ?
@@jonkhachyan1217зачем тогда форсунки так выбивать?
Лучше нагрели и охладили с водой несколько раза...
@@jonkhachyan1217 тогда конечно Печалька...
Почаще нужно показывать всем кто хочет купить современный дизель.
With a motor mount and a screw and an impact gun, it can be removed very easily and without damaging the piece.
If you crank the motor sometimes the pressure will pop them out.
Slide hammer, very useful, hard to find, even harder to find fittings for them, which is frustrating
How to break a engineblock
Last I checked the injectors fit into the head and not the block
Каждые 70 тысяч снимал и менял шайбы ,болты и смазку, все было ок.
А это жадность или халатность
А еще ани не знают что такое нагреть и раскоксовка😂
@@Tdwt-ig3xtв данном случае не помогает
Acetylene torch does wonders after you soak a blanket wet and lay in around the motor so you don’t blow yourself up but works everyone.
That right there upped the Labor Charge to double.
Poor sprinter needs a cylinder head now.
The Jerkovsky Method in action 😂
Мы на таком спринтере месяц ездили с открученой форсункой чтоб она наконец вылезла. Сервисники не могли ничем выдрать
At first glance I wondered why Freddie Mercury was dancing on top of that vehicle, not gonna lie.
iveco dayli engines lock the nozzles exactly like this, we suffer a lot from this here in Brazil
Я больше 10 лет езжу на мерседесах, и ни разу в моём опыте,не встречал такое, что форсунка не выходит
Пацаны как я вас понимаю! Но есть классный Съёмник для форсунок!
Коли форсунка прикіпає вони непомагають вони ламаються 😂
это жопа
Lucky it was the front injector
Первые две ладно. А остальные как вынимать?😂
Those are notoriously difficult on the sprinter.
This video has Eco-Diesel energy
The copper sealing washers should be replaced every 30000 miles and this will never happen is what I tell all the sprinter owners
Got to love the T1Ns
Start them out, compression is your best friend
Appreciate your working conditions
I did this in the Volvo boat rocking in the water in July in Florida ✌️ effing injectors
Как это знакомо!😅
Makes you love carburettas more...
дизель это экономно говорят те кто его не ремонтировал, пусть это будет сюрпризом продажей почки у них их 2 пока еще
this is why I work on my own vehicle. maybe this person is from Florida
There's a hydraulic special tool for pulling the injectors
After lunch they will realize its left hand thread
Приваривал стальное кольцо от 406го. колена и долбили обратным прессом, которым кузовщики газелевские рамы рихтовали, плюс ведро вэдешки и хрен. Разбил клапаную крышку зубилом и снял голову. Голова, под замену.
What about the back ones. I would build a puller rests on the valve cover rail.
Jajajajaja con el efecto de la transición pensé que había arrancado el motor y salía disparado jajajajaja que susto
Just simple turn the engine over and let compression do its job
Definitely need to be straight not binding it up on the block
Szacun dla lacznika zamontowanego między kierownica a pedałami.Zamiast sprintera to homonto i ogień , chodząca kupa szofer
Бурак теперь и в автосервисе работает?
The reality is he forgot to remove bolt and holding clamp.lol
nie lepiej odkręcić i jeździć obserwować? na pewno bezpieczna metoda
Съёмник для форсуночных и перед этим залить обезжиривателем на ночь
Эту тему мы проходили, я заливал фери с ВД или с любой другой пшиколкой фери прекрасно разъедает смолу
Именно поэтому я не занимаюсь ремонтом дизелей)
The curse of the Mercedes injector 😂
А как четвёртый цилиндр????
Third video today of injector removal 😂. UA-cam is telling me I may have an injector problem
Stuck? That injector is welded in lol
Очень удобно!😅😂🎉
Что не смеётесь? Не смешно? Это Мерседес!
Next job. Head replacement.
That angle is off 😂😂😂
Theres no way that the hole is good anymore.
I definitely see that being broken soon, comsidering your slamming it upwards at an angle. Im not saying theres an easier way persay, but dang that hurt to watch lol
Put anti seize on the threads next time, that's temperature compatible
There's no threads ;)
@Jeroen74 didn't know that, well I guess your fucked
Че за Литовский Экала Бэкала?
How you gonna do the ones in the back?
А открутить забыл😂😂😂😂
Wind that nut down on the slide hammer, losing a bit of energy there.
хорошо ! а как остальные которые которые в глубине там не размахнёшся
What is gonna be really hard if you pull straight up when you want to come out in angle
Счастливая форсунка😬
Bruh why doe the front of the vehicle look like my vehicle :/ but it's not the same vehicle
Typical mercedes injectors lol
HELOU REBJATA . UUUUU KAKAV MOTOR . ALI IPAK GOLF 2 DIZEL 1600 CM 40KW. ZAKON ILI SAVRŠENSTVO MEHANIKE .
I gotta watch these shorts with the volume off , every other short has this song , getting real annoying
Did he try asking nicely
Ну да)) из за угла лучше тянуть))
It helps to take the bolts out first
Дизель СИЛА!
Трек на фоне не очень, тут больше бенибенаси подойдет
Гидравлика рулит, вырывает любую намного проще.
Или обломает, и все, привет дорогостоящий ремонт.
Снимаем все крепления, заливаем химию на ночь, утром заводим, 20км проехать и достаём форсунки легко и непринуждённо.
Dickes Brett drüber legen und dann Motor Starten mit etwas Glück schießt es den Injektor raus , bei mir hat es so zumindest geklappt
Ja existe ferramentas pneumática pra isso...
This Mercedes diesel injectors always give probs and they are kak expensive
That's what you get with that common rail shite it fucks up the injectors in no time!!
I got mine to loosen after i undone the retainers a couple threads and took it for a drive......
Down there for dancing
Прикепают наглухо на себе испытал.
Just pull the car out of the injector, not tge injector out of the car
Гидро и электро молот есть для этого, или перфоратор в помощь
Страшный сон дизелиста . удар слабоват
Эти форсунки много встречается и есть такая!
Daqui a pouco arranca o motor 😂😂😂😂😂
Что это за дикари?😢😢😢
Wrong tool for the job
The tools not long enough 😂
What are you guy’s doing this is dark ages stuff there are tools out there for removing injections 😂😂😂
You are not pulling straight...
Ford ranger 3.2 Power Strokes manda abraço kkk
Atatch the engine hoist to it. Worked for me till i sent a puller through th4 cieling