Crazy how these guys rebuild stuff, no fancy clean workshop with expensive tools. Just a dirty Yard, old tools and alot of Mechanicl skills. I love these Vids
You could eat your dinner off my bench and floor. . . . sooooo careful with con rods crank etc. . . They throw stuff all over . . use chisels to take covers off etc . . . Amazing they don't leak everywhere . . . let alone RUN ha ha ha ha ha ha Hat's off the these boys for their work.
Greetings to you from Morocco. Thank you all. This space brings back memories and nostalgia when I was 17 in Morocco. Work in Morocco is similar to that in Pakistan. There was a teacher in our garage named Hassan. He was like a godfather. We call him only when we are in trouble. As for tools, we make keys. We are always broke and need clothes and safety shoes. The workshop seemed like hell to me, but there was a lot of information and professionalism. This is a job that requires tough and patient people to learn professionalism and requires a strong memory. That is why I am proud of him, I am honored and proud of him, and in one of the heavenly holy books it is said: (And We sent down iron, in it is great strength and benefits for people.) The Holy Quran Surah Al-Hadid (25)
These guys are an inspiration to me. I needed work done on my truck and usually would have someone do it for me. After watching several of these videos I got up off my entitled butt and got dirty and sweaty. two thumbs up to these hard working craftsman.
Always interesting and nice to see these creative mechanics. Question "how long do all those repairs last?" The engineblock looked like shit when they opened it for the maintenance.
I was interested in the firing timings. I didn't really get to see how he did the timing. With the kind of smoke it was producing, i feel it wasn't timed well. If the engine isn't timed well, it will run rich or lean, and eventually, it will seize. Another thing is that torque value, especially at fastening the crankshaft, is very important during the operation of the engine. If one bearing is tighter than the other, it will not be well lubricated well, and therefore, there is a high chance of engine knocking.
@@umarshahzad3087 When you just put an engine like that together all the oil you use on the parts during assembly will get into the combustion chamber and then smoke for about half an hour until it is burnt off. Very normal.
I agree with who’s lot of the professionals say this guys might not fallow the rules or the book instruction but a least they aren’t scared about a big projects not to long ago I brought my 6.9 idi to a several different mechanics shops here in town for a head gasket and no one wanted to take the job a lot of them even say on their website that there isn’t a job to big for them but they where scare of a 6.9 idi I end up doing it myself I’ll never try to hire anyone for my car repairs never again
"Or watch the things you gave your life to, broken, And stoop and build ’em up with worn-out tools... If you can force your heart and nerve and sinew To serve your turn long after they are gone, And so hold on when there is nothing in you Except the Will which says to them: ‘Hold on!’ :" From "If" Rudyard Kipling...:)
Before you break an engine you wash all the dirt off and place the engine were is a cement floor,sand ,dirt pebbles could damage components if tools are place in the floor especially when putting it together,they should have people keeping the place and tools clean, other than that they are hard working men
No they understand it on a much higher level than you . They know what parts can and can’t get damaged and they also clean everything perfectly before it’s put back on
You can always tell who's the boss by how clean they are and when all they do is stand around and just watch , yet somehow they get all the credit as if they did the hard work.
They doing what thet can with what they have ..if the out come of the repair is a positive outcome ok ..i enjoy watching folks who want to work to get the desired.. outcome thanks for the video
Para trabalhar nessas condições, só sendo homens jovens, porque só eles aguenta esse ambiente totalmente desprovidos de qualquer conforto para execução do trabalho pesado.Parabens a esses homens pelo de equipe.
These guys blow me away. Does not look like too many tea breaks. The only part that I don’t understand, torque settings, how they remember how to put it all together again, tolerances of engine parts. You would think for that extra step, would certainly warrant more care? That aside, these guys are absolutely amazing, and bearing in mind how much would their pay packet be? Probably peanuts. You guys are fantastic😮
everyone can say anything but they work very hard and a lot of effort,we can do our way but they do with their way,anyway enjine can run like usually...
These guys always seem to have a ''observer'' present, one guy who just stands there and watches what everybody else is doing, I think he is there for quality control.
I was a prime power production technician (52E) in the Army until retirement and then worked as a field service technician for Detroit Diesel/Allison. From working on Mega/Super yachts, very large land based and marinized generators and main propulsion marine Diesel engines, I have never seen anything as dangerous as this. This entire operation is insane and since every repair I ever did was in the field…nothing like this. I want to see the videos of the guys with their feet smashed to pulp and fingers cut-off. The heavy equipment they are repairing has hydraulics but, they don’t? Damn, at least demand a hydraulic crane or electric lifts. Their backs have got to be screaming when they get home and start to rest. 😳☹️
You want to watch the vid where they are stripping and rebuilding a CAT final drive , all of them wearing sandles , I'm 71 and still wear safety boots in my workshop , but I also know that if you drop something on your foot it always manages to miss the toe cap haha .
@@IVAN-bs5bq I have seen some seriously crazy $hit in videos like this. I wonder if their heads would pop at the sight of a decent pair of steel-toed work boots? If the countries even allow safety gear? 🥴
The epitome of a well cared for and maintained engine, obviously really well serviced! Sorry I Don't mean to be harsh but I can't stand to see things like that, regardless of how much I actually enjoy the video!
Very nice job ,but please be carfule use some tools to make laouding more safe and check slings and the hocks , be carful from Back pain and disc, God with you all .
A simple tear down and cleaning. A dirt lot, no power tools, wearing slippers and sandals! Never saw anyone check tolerances with a micrometer. Looked like new rings. We're heads machined? A tripod and chain fall?! At least they used a torque wrench. New bearings?
ماشا اللہ ھمارے انپڑ بچے اتنے زیادہ ماجرا ھیں کے اتنے بڑے بڑے انجن ریبلڈ کر لیت ھیں ھمارے ملک میں ٹالنۓ کی کمی نھیں ھے بس موقعے ملنے چاھیے تمام کاریگروں کو سلام اللہ آپ کے علم میں اور ذہانت میں دن دوگنی اور رات چارگنی ترقی عطا کرے
Crazy how these guys rebuild stuff, no fancy clean workshop with expensive tools. Just a dirty Yard, old tools and alot of Mechanicl skills. I love these Vids
Thanks for the view
You could eat your dinner off my bench and floor. . . . sooooo careful with con rods crank etc. . . They throw stuff all over . . use chisels to take covers off etc . . . Amazing they don't leak everywhere . . . let alone RUN ha ha ha ha ha ha
Hat's off the these boys for their work.
so amazing these people are... good job guys...
so amazing these people are.. good job guys....
They just make it work. It's amazing
I salute to these PAKISTANIS champions for there impressive hard work
Thanks
They are gays tho
@@namelesschild1113 if you mention word gay or israel next thing built will be going through your dirty brain
@@namelesschild1113 ....that's a nasty and unnecessary comment.....go sort your life out.
Greetings to you from Morocco. Thank you all.
This space brings back memories and nostalgia when I was 17 in Morocco.
Work in Morocco is similar to that in Pakistan.
There was a teacher in our garage named Hassan. He was like a godfather.
We call him only when we are in trouble. As for tools, we make keys.
We are always broke and need clothes and safety shoes.
The workshop seemed like hell to me, but there was a lot of information and professionalism.
This is a job that requires tough and patient people to learn professionalism and requires a strong memory.
That is why I am proud of him, I am honored and proud of him, and in one of the heavenly holy books it is said:
(And We sent down iron, in it is great strength and benefits for people.)
The Holy Quran
Surah Al-Hadid (25)
Amazing what they can do with the bare essentials and basic hand tools amazing ! Amazing if they had new tools ! Great video !
Yes they do
ماشاءاللہ جس قوم میں اتنے محنت کش ہوں تو وہ قوم کسی دوسرے ملک کی کس طرح مقروض ہو سکتی ہے سمجھ سے بہار ہے
because the debt was conceived to enslave them
Whats really amazing remembering how to put all of the parts back together
Lo más sorprendente es ver ese inmenso motor encender nuevamente con tanta fuerza...
Excellent video ! 👍
Thanks for the visit
@@mechanicalworld485 You're welcome !
5:20 Bamboo poles to joist the engine up.....And wearing running shoes on the job. Pretty valiant in my opinion!
steel poles.
i think they are retired oil rig drill pipes
Техника безопасности на высшем уровне!!!)))) Но мужики всеравно молодцы!!!!!
These guys are an inspiration to me. I needed work done on my truck and usually would have someone do it for me.
After watching several of these videos I got up off my entitled butt and got dirty and sweaty. two thumbs up to these hard working craftsman.
Always interesting and nice to see these creative mechanics. Question "how long do all those repairs last?" The engineblock looked like shit when they opened it for the maintenance.
Excelente trabalho!
Parabéns para toda a equipe!
Magní👏👏👏👏
Thank you for your response | Stay Connect us 🥂
Great job guys. Greetings from Brazil
Impresionante su trabajo son.unos especialistas para trabajar felicidades muchos y su cultura adeser impresionante saludos desde Zac mexico
Thanks (love Mexico 🇲🇽)
I was interested in the firing timings. I didn't really get to see how he did the timing. With the kind of smoke it was producing, i feel it wasn't timed well. If the engine isn't timed well, it will run rich or lean, and eventually, it will seize. Another thing is that torque value, especially at fastening the crankshaft, is very important during the operation of the engine. If one bearing is tighter than the other, it will not be well lubricated well, and therefore, there is a high chance of engine knocking.
Reason to smoke was that they tested engine without turbo, it's a turbo engine, what do you think?
Невникай
@@umarshahzad3087 When you just put an engine like that together all the oil you use on the parts during assembly will get into the combustion chamber and then smoke for about half an hour until it is burnt off. Very normal.
@@umarshahzad3087 it is diesel, so there will be smoke, but his concerns are valid all things considered
Let it knock , its a diesel!😂
It’s amazing work these guys do with the limited resources, simple tools and hard work.
They got that thing purring like a kitten!
Served my time on cats many years ago remember as a young lad stripping a D8 turbo problems good stuff
if the world turns to madmax these men will be gods
اقسم بالله العظيم افضل الشعوب هم الشعب الباكستان ❤❤❤❤❤❤❤❤
Shukarya 🫀
Sebaik baik agama adalah agama Islam
Did you get your Diesel particulate filters? 🤣👍
great cooperation in building the engine 👍👍
I agree with who’s lot of the professionals say this guys might not fallow the rules or the book instruction but a least they aren’t scared about a big projects not to long ago I brought my 6.9 idi to a several different mechanics shops here in town for a head gasket and no one wanted to take the job a lot of them even say on their website that there isn’t a job to big for them but they where scare of a 6.9 idi I end up doing it myself I’ll never try to hire anyone for my car repairs never again
It's really amazing how these guys work. Most of the tools I see are hand made , really amazing. If these guys came here they could make millions.
Wooly hard hat's and flip flop safety boots, all mod cons😂, health and safety would be doing back flips in the UK.
49:17 shout out to the guy taking all the smokes.😁
"Or watch the things you gave your life to, broken,
And stoop and build ’em up with worn-out tools...
If you can force your heart and nerve and sinew
To serve your turn long after they are gone,
And so hold on when there is nothing in you
Except the Will which says to them: ‘Hold on!’
:" From "If" Rudyard Kipling...:)
Mecánicos preestoricos, todo bien adelante con amor,❤🎉😅😮
All the oil and solvents on the ground appears to be a great weed killer...🤔
Pakistanis at there best even though with less resources
What Abt all the bolts n nuts? aren't they goin to mix?
Ahh your union workers hard at it.
You think with the technology they do have you think they would come up with a better way of moving that motor around
What time does the snap-on truck come by?
Before you break an engine you wash all the dirt off and place the engine were is a cement floor,sand ,dirt pebbles could damage components if tools are place in the floor especially when putting it together,they should have people keeping the place and tools clean, other than that they are hard working men
No they understand it on a much higher level than you . They know what parts can and can’t get damaged and they also clean everything perfectly before it’s put back on
Ye engine meri bike me laga va hai bht axha engine hai
You can always tell who's the boss by how clean they are and when all they do is stand around and just watch , yet somehow they get all the credit as if they did the hard work.
Excellent work 👍🌹❤️
Thank you! Cheers!
They doing what thet can with what they have ..if the out come of the repair is a positive outcome ok ..i enjoy watching folks who want to work to get the desired.. outcome thanks for the video
You are so welcome!Stay connected with us 🥂
No OSHA violations here 😮
Great craftsmanship.
None at all. EH&S is also not an issue.
Love their Tenacity! 👍
did you guys manage to start the engine? (at the end it did not start)
The world’s most efficiency and
very good price ,huge engines maintenance and
restoration base!
😂👏👏👏👏👏
تهانينا للشباب المبدعين إنه عمل رائع عندما كنت صغيرا عملت بهذه المهنة
Thanks brother
..вы сейчас инвалид?.
Para trabalhar nessas condições, só sendo homens jovens, porque só eles aguenta esse ambiente totalmente desprovidos de qualquer conforto para execução do trabalho pesado.Parabens a esses homens pelo de equipe.
pretty cool how the do things there. I guess it works. wonder how long that will last tho.
Imagine how a case of rubber work gloves, a hot tank, and some air tools would probably triple their efficiency.
Can I donate some rubber gloves ?!
These guys blow me away. Does not look like too many tea breaks. The only part that I don’t understand, torque settings, how they remember how to put it all together again, tolerances of engine parts. You would think for that extra step, would certainly warrant more care? That aside, these guys are absolutely amazing, and bearing in mind how much would their pay packet be? Probably peanuts. You guys are fantastic😮
team work, what a team you guys are! Great job.
this is teamwork, great achievements
Thank you
Really Golden Hands
Thanks 👍
I really admire your restoration talent, how can you remember all the small details?
Pay attention at 12:57 the right side guy almost lost a finger with crankshaft drop.
Good working videos.
Thanks for watching & Follow Me For More Informative Videos
everyone can say anything but they work very hard and a lot of effort,we can do our way but they do with their way,anyway enjine can run like usually...
Thanks for watching🥂& subscribe for More informative videos
Seems like a high enough quality job that they did
👍
Great teamwork I'll say that.
Thanks
Best to use dish soap on those liner o ring
Grease will cause the o rings to swell
Excellent work
Great tip!
Thats one hell of a puzzle to put back together.
I believe they used the video we are now watching but played it in reverse in order to remount all the pieces of the engine together.😄😄😄
These guys always seem to have a ''observer'' present, one guy who just stands there and watches what everybody else is doing, I think he is there for quality control.
👍
boss
Kibitzer.
Hahaha… quality control. Best joke of the day 🤣
Did you see the NAPA delivery truck?
The only unboxing of new items that I saw was piston rings. Not even a new camshaft. But those guys do work well as a team.
And yet it works. Makes you wonder
Donde poderlos ubicarlos en que cuidad viven ellos
wonderful job!!!
Thank you so much 😀
I was a prime power production technician (52E) in the Army until retirement and then worked as a field service technician for Detroit Diesel/Allison. From working on Mega/Super yachts, very large land based and marinized generators and main propulsion marine Diesel engines, I have never seen anything as dangerous as this. This entire operation is insane and since every repair I ever did was in the field…nothing like this. I want to see the videos of the guys with their feet smashed to pulp and fingers cut-off. The heavy equipment they are repairing has hydraulics but, they don’t? Damn, at least demand a hydraulic crane or electric lifts. Their backs have got to be screaming when they get home and start to rest. 😳☹️
You want to watch the vid where they are stripping and rebuilding a CAT final drive , all of them wearing sandles , I'm 71 and still wear safety boots in my workshop , but I also know that if you drop something on your foot it always manages to miss the toe cap haha .
@@IVAN-bs5bq I have seen some seriously crazy $hit in videos like this. I wonder if their heads would pop at the sight of a decent pair of steel-toed work boots? If the countries even allow safety gear? 🥴
And NO workers comp either I'm sure. Work or don't get paid. Injury? That's on you..
the boss keeps his hands clean, good for him
Thank you so much & Subscribe for more informative videos 🥂
Aaaaaahhhhh the smell of Diesel Exhaust in the morning? Good for the lungs and clears the sinuses!!🇨🇦😄
Oh yes!
like it the mechanic💪💪💪💯💯💯
Pakistan contry bleessed for Lord!!!
❤️
Вот это молодцы мужики! Браво!
Thank you 👍
Takes a lot of time but the wages are low ,very low .but it gives work to a lot of people in different ages.
This blows my mind🫡🔥🔥🔥🔥🔥
The epitome of a well cared for and maintained engine, obviously really well serviced! Sorry I Don't mean to be harsh but I can't stand to see things like that, regardless of how much I actually enjoy the video!
Thanks 👍
Some personal protective gear to protect the skin from oil and solvents would seem advisable. Nitrile gloves, safety boots and glasses would help.
Amazing doing this on a dirt floor ? I the United States no one would touch this job !
Very nice job ,but please be carfule use some tools to make laouding more safe and check slings and the hocks , be carful from Back pain and disc, God with you all .
Thanks for the tips!
Very impressive
No oil on the crankshaft !
Can we all get together and send them some Snap-On tools?
Are you gonna tell me there is one guy who can put that all back together???
A simple tear down and cleaning. A dirt lot, no power tools, wearing slippers and sandals! Never saw anyone check tolerances with a micrometer. Looked like new rings. We're heads machined? A tripod and chain fall?! At least they used a torque wrench. New bearings?
Great point!
Not a lot of worker protection and security.Wonder how many are wounded or dead around the work shops in Pakistan every year .
ماشا اللہ ھمارے انپڑ بچے اتنے زیادہ ماجرا ھیں کے اتنے بڑے بڑے انجن ریبلڈ کر لیت ھیں ھمارے ملک میں ٹالنۓ کی کمی نھیں ھے بس موقعے ملنے چاھیے تمام کاریگروں کو سلام اللہ آپ کے علم میں اور ذہانت میں دن دوگنی اور رات چارگنی ترقی عطا کرے
Ameen 👍
Are gaskets not used in big engines?
These are sure hard workers, but it kills me to watch them rolling this engine, and its parts and components, around on the ground.
Wow really amazing work,
You are a very proportional mechanic I am very proud of you,
Thank you for sharing your experience,,,,
Thank you very much!
I like their safety shoes.
Respect is what you give them, not insults.
Just remember, this country has developed nuclear weaponry...
anybody know where exactly this is from? please and thanks !
Пакистан
Wonder how many crushed toes?
HARD WORK FOR SURE.. AND THE SALLARY OF THOSE PEOPLE?
Mis respectos a estaz personal aca en canada 🇨🇦 seria super ganando mucho dinero deverian de venir aca alberta Calgary canada 🇨🇦
i better know, how much efforts spent during shoot this video by creator. wishing you good luck boss
The more important people, stay clean, and watch. St.Paul,Minnesota.
Thank you for your response🥂
Baboo, where did you put the bolts to the manifold???😂
Каждый раз охреневаю! Так собрать не каждый может.
senhores Paquistaneses o trabalho de voces sao admiravel abraços. de BRAZIL .
HAZMAT in the making!
Mind blowing 🤯
You are so welcome!Stay connected with us 🥂