I like the Kiwami 4 that you using, do you think the Kobalt 27 gallons with 4.5 CFM compressor can handle this gun? If not! what is the most quality gun under $300 that you recommend for my compressor. Thank you.
Even tho the kiwami uses less air than most guns it will still require more air than your compressor will continually put out. It will work but will fluctuate badley. The gun I would recommend is the r500 it only requires 3.5 cfm's to operate and it performs relly well and is around 60.00 here's a video I did on the gun and links to the gun in the description. Appreciate the support! ua-cam.com/video/VvdcmxJRtsM/v-deo.html
@@GarageNoise Thank you so much on the recommendation, I just cancel the order of Kiwami 4 from Japan, it’s a nice quality gun, made in Japan, but not for me, I though I can combine 2 of 27 gallons compressor for $600, and extra 25 gallons old tank only that totals of 79 gallons storage that can handle the Kiwami 4 , to get away buying a big 80 gallons compressor for $1,200 that too noise to disturb my neighbor , I am going get the one that you recommend to try it out. Your clear coat look awesome , wish I will get the same, have a safe and happy holiday . Trung Le 🇱🇷🎉💥😀
Superb Professional job. Great. I needed your help dear. I am getting 8 panels of my honda civic painted due to an accident. Roof, front hood, trunk lid, one door panel, two quarter panels, amd two pillars. I got the job fone at a workshop in my locality, but the colour match was not perfect amd they are planning to repaint it. My car's colour is Platinum white pearl NH 883 P. Its a 2 yrs old car but almost in new condition as i hardly drove it for 3k miles. I need your help about the following please... 1. How much quantity of paint ( base, pearl and clear coat) would be needed for the 8 panels i mentioned. Pl guide me about the exact quantity of each component i.e. base, pearl and clear. 2. How many coats of each component needs to be done for that perfect finish and durability 3. I noticed that the pearl effect is not at par with company finish after the job done by the workshop. Could you please guide me as to how many coats are needed to be done and what quantity needs to be applied for each individial panels. Your help and advise would be greatly appreciated. I am anxious about the job. 🙁
Hi there. I’m looking at painting my motorcycle. I have a 44 gallon compressor and was wondering what spray gun you would recommend for base and clear coat. I will be painting it in my garage. Thank you and your videos are awesome btw!
Your compressor probably produces about 13 cfm's . That's a little low for a paint gun although it will work for small projects like a motorcycle or a couple panel on a car. You could probably use the Iwata kiwami 4 which is a fantastic gun and a bargain. If you concerned about having enough air the r500 is a budget gun that sprays great and only requires 3.5 cfm's to operate efficiently. I do have video's on these guns. Hope this helps appreciate the support !
Enjoying your channel. Trying to learn from all of your videos. I recently purchased the budget friendly gun you spoke about that amazon sells and that Eastwood sells rebranded in their brand. I get you said they’re great for small compressors but I’m sure my 60 gallon 5hp ingersol Rand compressor is plenty cfm for it? But my overall question is I’m debating on painting my 68 cougar myself, which would be my first car I paint myself in my garage. I’m planning on painting it a tri-coat pearl white, kinda like in this video. Do you think this paint choice/job is something that is do-able for someone painting their first car in their garage? Thanks
When you say you have the volume set to "3 turns out from closed," do you mean 3 complete (365°) turns, or just 3 half turns on the knob (basically 1.5 complete 365° turns)?
Three full turns from closed. That's not set in stone. I would start there , the important thing is you want a good med to wet coat on base and a good wet coat when applying clear. Appreciate the question and support!
Hi Chris hope you ok mate iam going to paint my bumper and bonnet or hood 😀 as you say in the us 🇺🇸 😉 I won't have to blend it will I chris the bonnet the clear coat pleaing some body said 320 grit and the primer it then base coat on and clear coat paint
@@GarageNoise Thank you for your videos, you explain very correctly and clearly, for me personally this is very valuable information. Hello from Ukraine, I wish you peace and goodness! )
@@GarageNoise Thank you for the huge support, my childhood dream is to get to the USA, if it comes true then I will definitely shake your hand)). May the Lord God protect us all.
Nice videos. I am wondering because you dont use a paintbooth and you spray customers cars, dont you have lots of dirt in it? Do you spray the floors with water before spraying? Can you show us the fans your using? Greetz from The Netherlands!
Neatherlands cool! I do as much as I can to reduce trash in paint. I have a video with the step I take. I don't het alot of trash in the paint only slightly more than sprayiny in a booth. I do wet the floor down.
The clearcoat stage is so satisfying. Another great video. Greetings from the UK
I know right, for me too! Appreciate the support!
Great tips! We use all your guns and systems!
Our Aircrafts are all GIANT SCALE RC's for films and movies! Thankyou! Subscribed...
I absolutely love your content, you make everything simplified, and of course you do top notch work 🤘keep it up and I’ll keep enjoying and learning
Thank's so much, Appreciate the comment and support Rico!
I like the Kiwami 4 that you using, do you think the Kobalt 27 gallons with 4.5 CFM compressor can handle this gun? If not! what is the most quality gun under $300 that you recommend for my compressor. Thank you.
Even tho the kiwami uses less air than most guns it will still require more air than your compressor will continually put out. It will work but will fluctuate badley. The gun I would recommend is the r500 it only requires 3.5 cfm's to operate and it performs relly well and is around 60.00 here's a video I did on the gun and links to the gun in the description. Appreciate the support!
ua-cam.com/video/VvdcmxJRtsM/v-deo.html
@@GarageNoise Thank you so much on the recommendation, I just cancel the order of Kiwami 4 from Japan, it’s a nice quality gun, made in Japan, but not for me, I though I can combine 2 of 27 gallons compressor for $600, and extra 25 gallons old tank only that totals of 79 gallons storage that can handle the Kiwami 4 , to get away buying a big 80 gallons compressor for $1,200 that too noise to disturb my neighbor , I am going get the one that you recommend to try it out.
Your clear coat look awesome , wish I will get the same, have a safe and happy holiday .
Trung Le 🇱🇷🎉💥😀
You know how to blend and spray clear. Tri-coat spot job looks good.
Thank's brother!
I have just discovered your channel. Interisting advise and content ! Keep it up !
Thank's! Welcome to to community! Appreciate the comment and support.
Superb Professional job. Great. I needed your help dear.
I am getting 8 panels of my honda civic painted due to an accident. Roof, front hood, trunk lid, one door panel, two quarter panels, amd two pillars. I got the job fone at a workshop in my locality, but the colour match was not perfect amd they are planning to repaint it. My car's colour is Platinum white pearl NH 883 P. Its a 2 yrs old car but almost in new condition as i hardly drove it for 3k miles.
I need your help about the following please...
1. How much quantity of paint ( base, pearl and clear coat) would be needed for the 8 panels i mentioned. Pl guide me about the exact quantity of each component i.e. base, pearl and clear.
2. How many coats of each component needs to be done for that perfect finish and durability
3. I noticed that the pearl effect is not at par with company finish after the job done by the workshop. Could you please guide me as to how many coats are needed to be done and what quantity needs to be applied for each individial panels.
Your help and advise would be greatly appreciated. I am anxious about the job. 🙁
Would you say the iwata gun could be used for sealer, base, pearl, and clear? Looking for a good all around gun that can do it all.
For sure , it's is really a great all around gun. It's a steal for the price.
Hi there. I’m looking at painting my motorcycle. I have a 44 gallon compressor and was wondering what spray gun you would recommend for base and clear coat. I will be painting it in my garage.
Thank you and your videos are awesome btw!
Your compressor probably produces about 13 cfm's . That's a little low for a paint gun although it will work for small projects like a motorcycle or a couple panel on a car. You could probably use the Iwata kiwami 4 which is a fantastic gun and a bargain. If you concerned about having enough air the r500 is a budget gun that sprays great and only requires 3.5 cfm's to operate efficiently. I do have video's on these guns. Hope this helps appreciate the support !
👍👍as always great video sir
Thank's Nelson! Appreciate the comment and support!
Looks great
Thank's brother! Appreciate the comment and support!
Enjoying your channel. Trying to learn from all of your videos. I recently purchased the budget friendly gun you spoke about that amazon sells and that Eastwood sells rebranded in their brand. I get you said they’re great for small compressors but I’m sure my 60 gallon 5hp ingersol Rand compressor is plenty cfm for it? But my overall question is I’m debating on painting my 68 cougar myself, which would be my first car I paint myself in my garage. I’m planning on painting it a tri-coat pearl white, kinda like in this video. Do you think this paint choice/job is something that is do-able for someone painting their first car in their garage? Thanks
I think so it's just basically an extra step.
When you say you have the volume set to "3 turns out from closed," do you mean 3 complete (365°) turns, or just 3 half turns on the knob (basically 1.5 complete 365° turns)?
Three full turns from closed. That's not set in stone. I would start there , the important thing is you want a good med to wet coat on base and a good wet coat when applying clear. Appreciate the question and support!
Hey Chris I'm interested in that spray iq system. Did you say it's only compatible with PPS 1.0?
No, it comes with a cup, you can use whatever adapter you need for your system.
Nice work 👍. Kerala
Thank you, appreciate the support!
Hi Chris hope you ok mate iam going to paint my bumper and bonnet or hood 😀 as you say in the us 🇺🇸 😉 I won't have to blend it will I chris the bonnet the clear coat pleaing some body said 320 grit and the primer it then base coat on and clear coat paint
Sand smooth with 320 primer it, sand with 320 or 600 then paint and clear.hope this helps
What is the Perl metallic layer paint? Can we see close up, is it like Acura tax Perl white?
Like your video! Nice job, wait next film.)) Have a nice day to all .
Appreciate the comment and support!
@@GarageNoise Thank you for your videos, you explain very correctly and clearly, for me personally this is very valuable information.
Hello from Ukraine, I wish you peace and goodness! )
@@LoftmetalLutsk Be safe over there , your country is in our thoughts and prayers.
@@GarageNoise Thank you for the huge support, my childhood dream is to get to the USA, if it comes true then I will definitely shake your hand)). May the Lord God protect us all.
Great video Chris,, do you ever use an airbrush for doing small bits like stone chips
I have found it not to be as effective as I'd like. So I stick to a touch up pen.
Nice videos.
I am wondering because you dont use a paintbooth and you spray customers cars, dont you have lots of dirt in it? Do you spray the floors with water before spraying?
Can you show us the fans your using? Greetz from The Netherlands!
Neatherlands cool! I do as much as I can to reduce trash in paint. I have a video with the step I take. I don't het alot of trash in the paint only slightly more than sprayiny in a booth. I do wet the floor down.
Great video
Where I can buy spray gun the one you use?
amzn.to/44HVJ9t here you go!
Nice job
Thank's brother!
Can I paint Pearl out in the open
Yes , it's just and extra step
Im looking from shillong,meghalaya,india