Asus Tuf RTX 3060 Ti - Does Hynix X005 impact Crypto Mining and Gaming? Here Is A Solution.
Вставка
- Опубліковано 26 сер 2024
- Watch our latest video on two Asus Tuf RTX 3060 Ti GPU's with SK Hynix X005 being replaced with Samsung memory for stable gaming and Crypto mining.
Previously utilized in a mining rig, the user reported a 'not detected' issue. Upon investigation, we discovered that the cards having SK Hynix X005 memory, known for a manufacturing defect.
This detailed repair video meticulously captures the process of replacing the problematic SK Hynix X005 memory with reliable Samsung memory, providing a comprehensive solution to the detection and other memory related problems. Watch as we conduct MATS and other stress tests to ensure the successful revival of both cards.
Join us in this in-depth exploration of GPU troubleshooting and repair. Subscribe, like, and share to stay informed on the latest in graphics card maintenance and witness the precision of hardware restoration.
Support me on Patreon: patreon.com/GraphicsCardRepairs
You Can Book Your Repair At : graphicscardre...
🔴 Don't miss our latest repair videos! Subscribe for more: / @graphicscardrepairs-t...
🔴 Support My Other Channel
/ @pixel_playground
👁️🗨️ Must-Watch Videos:
GPU Reballing: • Master The Art of GPU ...
Memory Chip Reballing: • Master The Art of Memo...
How to Repair Broken Memory Pads: • The Hidden Art of Grap...
🔧 Other Related Graphics Card Repair Videos:
RTX 4090 Repair (Error Code 43): • PNY XLR8 RTX 4090 Repa...
RTX 3070 Repair (No Display): • MSI Ventus RTX 3070 GP...
RTX 3070 Repair (Not Detected): • MSI Ventus RTX 3070 No...
RTX 3060 Ti Repair (Not Detected): • Gigabyte RTX 3060 Ti N...
🌐 Connect with Us:
Website: graphicscardre...
Email: support@graphicscardrepairs.com
Facebook: www.facebook.c...
Instagram: / graphicscardrepairs
🔥 Tags: #gpurepair #SKhynixX005 #rtx3060ti #gpusolutions
Atmospheric Morning Corporate by LesFM | lesfm.net/
Music promoted by www.chosic.com...
Creative Commons CC BY 3.0
creativecommon...
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
![THE ULTIMATE RTX 3060 Ti SHOWDOWN!!! [ASUS, Gigabyte & MSI TESTED!]](/img/n.gif)
Thanks for this video...
Your welcome 😁
Great job. You make it look so easy. Music volume was excellent.
Thank you
Skhynix make some absolute trash memory. So much so that I actually shake or get depressed when I take a cooler off a graphics card and see this memory new or old stock.
In my experience there memory will always fail after time especially if mining on a card. Most gamers won't notice due to just gaming but if you do any type of rendering or mining you already know what I'm on about 😂.
My new 7900xtx is already down from 2700mhz to 2650mhz and all I have done is light gaming. Manufacturers know this and buy there memory because it's cheap you will always get most cards especially 1st 2nd revision cards with this cheap crap product.
All my mining cards are fine now that I have rma'ed and received Samsung memory on the replacement not even one card has skipped a beat after two years of mining. Now that is ridiculously impressive.
Sample size 43 cards!!!
Please also share the temp for while removing and re balling 😢
Temps for preheaters is at 118c and hot air is at 420c with 60% airflow for lead free solder. And for leaded solder the preheater is the same but the hot air is at 350c with 60% airflow.
@@GraphicsCardRepairs-tk7ql thank you sir
Hey I also have Asus Tuf 3060ti Gddr6 oc v2!! I've purchased this in oct 2022! And i checked this in gpu z that it has hynix but is this issue happens only with old version of 3060ti??
Like I've v2 of tuf oc??
It happens to all 3060Ti with SK Hynix with the code "X005". On 3060Ti's all SK Hynix memory modules come with X005. If your card is using SK Hynix then it is using X005. As long as it is working fine the card will work. There will come a day when the errors will crop up and then all 8 memories will have to be replaced with Micron or Samsung. This is not a brand specific issue but with all brands using this memory module
What’s the temperature for top and bottom heat? How much air speed and approximately how long to heat the chip before you can take it off the board?
For the preheat on the mat the temp is at 118°C and hot air is at 420°C at 60% air flow on my atten hot air station while removing and installing unleaded solder. When installing leaded solder the preheat temp on the mat is the same at 118°C and the hot air is at 360°C with 60% air flow. There is no time as to how long you have to heat the board. I tap it gently with my tweezers to check if the solder has melted and if the chip is moving. Once it's moving upon tapping I remove it.
@@GraphicsCardRepairs-tk7ql Thank you. Do you use the same temp for core removing and installing as well?
No I use a different machine for core removal. Watch this video. I have the machine displayed here.
ua-cam.com/video/wQrQjsJTpLM/v-deo.html
what type of flux you use , and solder balls and how much heat you apply from hot air and pre heat bed for chips , thank you
Solder balls are leaded. I use mechanic AD 559 flux. When installing I use preheater at 115 and hot air at 350c while installing. And 420c for lead free chip removal with air at 60%. I have shown this in this video ua-cam.com/video/NUcRiPjry40/v-deo.html
@@GraphicsCardRepairs-tk7ql thank youuuuu ,for detailed explain
Is there is any possibility of upgrading rtx 3060 ti 8gb vram to 16 vgam changing memory chips to 2 gb of 8 instead of 1 gb of 8
No it is not possible as this card there was no BIOS designed for 16gb modules. Even if we install 2gb modules it will give errors on all memory. BIOS is required for 16gb modules.
I have a Pallit 3060 ti with hynix memmory, my RMA was denied. I am expiriencing green artefacts, the pc start but randomly shuts off, and sometimes when restart it makes beeping sounds and shuts off again. Is it the 005 memory or the core? is there a way know, with these symptoms?
It's the X005 memory. The symptoms are the ones common on Hynix X005.
Hi Frazier! Quick question: did you have to tinker with the straps in order to go from Hynix to Samsung or was it not necessary with these cards?
Yes I changed the straps on both cards from Hynix to samsung. It's there in the video as well.
@@GraphicsCardRepairs-tk7ql I must have missed it. I do youtube while doing other things 😄
i heard that when a GPU has Hynix or Micron memory its necessary that all VRAM chips need to be replaced. Is it still like this or was it in the older cards only ?
For Micron it was the 2018 batch. That mainly came in the RTX 20 series cards. That issue was solved by Micron in the 2019 batches of chips manufactured. SK Hynix it's the X005 that is known to have this problem. Hynix has other batches which do not have this problem.
@@GraphicsCardRepairs-tk7ql i had a 1060 6gb with Hynix and when i ran MATS it showed 2 chips with write errors but the other chips also had 20 or so errors does that mean they all went bad or its the faulty ones that make the other ones seem problematic ?
I would recommend to replace the 2 faulty ones and then run the test again. If the others are still showing faulty possibilities are the issue is with the core. GTX 1060 uses GDDR5. There was no known issue with Hynix with GDDR5.
@@GraphicsCardRepairs-tk7qlwow man thanks for the good and easy to understand answers and solutions you give me. Im glad i found your channel. Keep up the good work 💪