RTX 3060Ti Memory Swap to Samsung and Not Detected Fix
Вставка
- Опубліковано 26 сер 2024
- In this video, we tackle the repair of a Palit RTX 3060 Ti, which was reported as "Not Detected." Initially, we found a shorted AND gate that needed replacement. After fixing that, we discovered a more significant issue: the GPU was equipped with the notorious Hynix X005 memory, known for its defects. To resolve the problem entirely, we replaced all the faulty Hynix memory with reliable Samsung modules.
Watch as we guide you step-by-step through:
Diagnosing the detection issue and identifying the shorted AND gate.
Replacing the defective AND gate and inspecting the GPU further.
Discovering the defective Hynix X005 memory and performing a complete memory swap to Samsung.
Testing the GPU to ensure it functions perfectly post-repair.
Don't miss out on this comprehensive repair guide highlighting common and unique challenges with GPU memory issues.
🔧 Key Topics Covered:
Troubleshooting GPU detection issues.
Identifying and replacing faulty AND gates.
The process of swapping defective Hynix X005 memory with Samsung memory.
If you find this video helpful, Like, Share, and Subscribe to our channel "Graphics Card Repairs" for more in-depth repair videos and tutorials. Leave a comment if you have any questions or feedback!
Please support me on Patreon: patreon.com/GraphicsCardRepairs
You Can Book Your Repair At: graphicscardre...
🔴 Don't miss our latest repair videos! Subscribe for more: / @graphicscardrepairs-t...
🔴 Support My Other Channel
/ @pixel_playground
👁️🗨️ Must-Watch Videos:
GPU Reballing: • Master The Art of GPU ...
Memory Chip Reballing: • Master The Art of Memo...
How to Repair Broken Memory Pads: • The Hidden Art of Grap...
🔧 Other Related Graphics Card Repair Videos:
RTX 4090 Repair (Error Code 43): • PNY XLR8 RTX 4090 Repa...
RTX 3070 Repair (No Display): • MSI Ventus RTX 3070 GP...
RTX 3070 Repair (Not Detected): • MSI Ventus RTX 3070 No...
RTX 3060 Ti Repair (Not Detected): • Gigabyte RTX 3060 Ti N...
🌐 Connect with Us:
Website: graphicscardre...
Email: support@graphicscardrepairs.com
🔥 Tags: #palitrtx3060Ti #gpurepair #gpusolutions
Attribution: Sound Effect from Pixabay
Great job, can't wait for the memory upgrade videos. Thanks for the videos
I will release a video once I fix the issues 😁
It looks like so easy... Nice job!
Thank you 😁
Nice work sir :)
Thank you 😁
good job brother
Thank you 😁
Awesome awesome brother huge fan of your work🎉
Thank you so much 😀
Nice job buddy
Thank you 😁
Thanks or this great vid, always learning and thanks for having the join option, just joined now
Thank you 😁. It means a lot to me
Nice job, Frazer!
Thank you brother 😁
Is it possible to swap memory on the 3060 Ti with bigger chips? ie go from 8GB total to 12GB total RAM on the GPU...
I am working on an upgrade like this on an RTX 3060Ti. Currently, there are some hiccups that I am trying to resolve. I will release a video once I fix it. 😁
Waiting for your video bro@@GraphicsCardRepairs-tk7ql
I want to 100% send you my 3060ti for a upgrade, but this shipping UGH!!! Lol
Another great job!
Thank you! 😁
Why is Unigine Heaven corrupted at the end showing the benchmarks? Is it the capture and it was ok on screen or something else?
You mean 3d like effect thing? Yes I have to change settings to default.
The SK hynix H56G32CS4DX005 VRAM is best replaced with which Samsung VRAM: K4Z80325BC-HC16, K4Z80325BC-HC14, or K4Z80325BC-HC12?
You can either replace it with a K4Z80325BC-HC16 or with a K4Z80325BC-HC14. Don't use the HC12 one. It's slow. HC16 would be like an upgrade having scope for over clocking by 500Mhz to 1000Mhz in MSI after burner depending on the VRM phases for memory. On smaller cards with just 2 phases with HC16 can be over clocked by 500Mhz with no issues and with cards with 3 or more phases for memory can be over clocked up to 800Mhz to 1000Mhz without any issues. I will be releasing a video on this soon. The 3060Ti memory upgrade.
@@GraphicsCardRepairs-tk7ql I can't wait to see that video. So, is HC16 better, and will it run normally without overclocking?
I have a graphics card with SK Hynix X005 and it has a problem where the VGA frequently shuts down unpredictably. Whether I use it for gaming or leave it idle, the VGA shuts down suddenly while the PC continues running. Usually, I switch the HDMI cable to the IGPU and the PC runs normally.
There are no signs of overheating or artifacts, FurMark and 3DMark tests show no issues unless the VGA shuts down suddenly.
There seems to be something unique: if my PC is not used for a while, around 1 to 3 days, when I turn it on, the VGA can run for more than 3 hours. However, once it shuts down suddenly and is turned on again, the VGA only lasts until the Windows login screen.
I have tried DDU with no change, and using a different VGA works fine with no issues.
Could this be a sign of a problem with the VRAM on the SK Hynix X005?
Yes this is a typical X005 issue. Swapping to Samsung should solve the issue. HC16 is basically 16Gbps memory it is faster compared to HC14 which is 14Gbps memory speed. By default since the BIOS recognises only with strap only in the 14Gbps setup the default speed will be 14Gbps but it has more room to overclock. Unlike the HC14 which will peak with a 500Mhz overclock HC16 can go beyond. On a 4 phase memory VRM it can go up to 2000Mhz overclock on MSI afterburner. Now that is some real speed boost. However on a 2 phase I have noticed artifacts after 1000Mhz. Still this is a good hike in speed. Hope this helps. Even if there are only 2 phases for memory, the MOSFET/DRMOS can be upgraded to a higher Amps rating . Like most 3060Ti come with 50A MOSFETs or DRMOS these can be upgraded to something like 80A to get some added power.
@@GraphicsCardRepairs-tk7ql Thank you for the detailed explanation. I hope it will resolve the issue I'm experiencing. I look forward to the video on the upgrade. Thanks a lot.
Awesome 👏
Thank you 😁
what wrong with the hynix memory's?, why not replace only the bad one? or it does gives pass on mats/mods test like the the early microns on 2000 series cards?
Its a similar case like early micron. The X005 memory of Hynix is defective. it passes in mats but gives error code 43 and crashes in windows.😁
@@GraphicsCardRepairs-tk7ql ohhh I see, good to know, thank you.
ciao sono italiano prova con il traduttore , volevo sapere se io ho una 4060ti 16 gb gddr6 e volessi portarla a 16 ma gddr6x ,posso farlo? come faccio a farla funzionare?
I pin dati di GDDR6 e GDDR6x non si trovano nella stessa posizione. Quindi se GDDR6X è installato sullo slot GDDR6 non funzionerà e potrebbe causare danni al core. 😁
Ho capito unica soluzione è mettere gddr6 più veloci
nice job fixed
Thank you 😁
Super bro
Thank you 😁