Never knew you did some of these mods. I guess I'm gonna have to look into trying some on the B2301. Thanks for the recommendations. I think I'll check them out, though I've heard of some of them before. Of course this goes without saying but yet again another great video that was well worth watching, Jon. Thanks for putting out content. We'll always be here to watch it. Take care, and God bless.
Thank you for the kind words Jackson! I bet you're getting all sorts of work done with that new B2301. Hope you are enjoying it! Take care and God bless.
Just a suggestion, but I switched the Wheel Spinner from the right side of the steering wheel to the left side. Allows using left hand to drive and right to work loader joystick which proved to be much more convenient. One of the best accessories I've ever added to any of the 3 different Kubotas I've owned over the years. Just beyond convenient!!
Because of the condition of this tractor I traded it in with 400 hours on it for just $2000 less than what I paid for it. The condition really helps resale value. I like my stuff looking good. Keep on tractoring!
I got a 2018 LS XG3025. I've completely abused it for 2 years now. I've done hardcore stuff with it that no one should ever do with a tractor its size and it has not given me any issues whatsoever. This tractor is a beast. It outperforms my dad's Kubota L3600.
Those LS tractors are really nice machines! I've been impressed from what I've seen other you tubers doing with them. There are a lot of good tractor brands on the market right now. Keep on tractoring!
Steve Rob is the coolest guy from Muskrat Dam. Love his vids along with Paul and Kathy. Recently hooked up with Steve Morgan. His video are getting better and better. Really enjoy your video's too. From a Minnesotan 40 years removed.
I love Steve Rob's energy that he brings to every video he does. The outhouse build is hilarious to me and the fact that most videos he does involve him enjoying a beer. Steve Morgan's videos I like because they usually involve his tractor and he does a nice job with his commentary. God bless.
Thanks for the shout out Jon! You sure keep the BX looking nice! I've got a video scheduled to post tomorrow and I mention you and your sweet dump trailer. Keep up the great work!
Thanks for noticing my shiny tractor. I took a page out of Paul's book and shined it up all nice and pretty before I did the video. LOL. Looking forward to seeing your next video. I enjoyed your garbage can hitch vid. I figure that exactly what I'll get when I get that 5-10 acre parcel some day with a long driveway. God bless
Jon Ritter I know you love your neighborhood you live in but I think you would have a blast out on some property to really play in! In the end, there is always pros and cons to both, gotta make yourself happy wherever you are!
WD40 works great as a degreaser, don't spray it directly on as you don't want it getting inside the fitting. Rather spray some on a rag and wipe excess grease away. I also use wipe WD40 on all plastic parts such as the side panels, dash area and lever housings. Give it a try and keep on tractoring! God bless.
I'm getting a new BX23S this coming week and I can't wait to get it! LED's are going to be my first mod, but many others will surely follow. Thanks for the great ideas!
Congrats on getting a new machine! You’re going to love it! LEDs will really make a difference for you. Glad I was able to give you some ideas. Have fun! God bless
You got itvright talking about Paul Short. He has actually made a video or 2 for me to help me out. The basic soldering video was made exclusivly for me. They took time out of their already extremely busy because of his business and helped another youtuber out. I realize he cant do that any more, so I cherish those times. I have gotten quite a few mods from Paul and Kathy ovef the years. Best $$ I ever spent. I have a few of them in my latest video, but have added more since then. I bought a brand new bx1880 back in April. They even allowed me to call her, yeah her, "Mini Killer". Killer and Lil Killer needed a lil Sister. They are truly 2 of the most AWESOME people around and I hope one day to meet them in person. Conversations on phone and sending messages and emails are 1 thing, but a 1 on 1 in real life, OH MAN! Thay would be so freakin AWESOME.
I remember Paul's soldering videos, I bought all the soldering tools he suggested and I try to follow the steps he showed in his videos. I sure appreciated him taking the time to show us all how to do things better. His modifications always looked factory made and that's what I liked most about his work. Fantastic fabricator and great people. Keep on tractoring!
I have been over and over this video, I subbed also. I have a few of your mods, but my bx2380 has a whopping 1 hour on the clock. But, the mirrors, wheel spacers, top cover, some small stuff I have in the garage, awaiting the owner(me) to start. Great video, thanks for sharing. Oh, the added bar on the fel to help it keep up it life.
Really love your videos. Thinking about making a channel and shooting some videos myself with my BX25D and my new K-008-3 Mini Excavator I just bought. I have a Go-Pro Hero 4 that I will use for the videos. Just been hesitant to start filming anything. Keep on tractoring.
I use a Gopro as well and I've been really happy with the quality. The nice thing is that you can edit and only show folks the good stuff and cut out all the screw ups. You'll get better with each one. Would love to see some more Kubota videos so get going! Looking forward to it. Keep on tractoring and God bless.
Good video,I follow most of those channels. I have a JD X-530 mower I use on about five acres.tricked out well for me. I love it.but someday I hope to get a compact tractor. I really use my wheel spinner ,was twelve dollars at my JD dealer. I find their prices competitive with everyone else.and their service is second to none. Have a great day!
Thanks for watching, take some time to check out the Kubota BX when you decide to upgrade to a compact tractor. Those wheel spinners make mowing much better. Keep on tractoring. God bless
Good vid Jon as always. I don't comment much but rest assured I'm watching. I also follow all of the guys and gals u mentioned. Keep on tractoting and be safe. One u didn't mention thats well worth checking out is David Dobbs. He is currently experiencing some health problems so all u folks keeps him in ur prayers. He would surely appreciate it. I'm done now!!!
Thank you and you're right, the only reason I forgot Dave is because he hasn't done a video lately and it was an oversight. I watch Daveknowshow but yes I'm worried about his health. I hope his cancer treatment works. Keeping him in my prayers. God bless
Hi John. Just bought an L3901. Haven’t even got it yet but was looking for mirrors. Stumbled upon your mirror idea and just ordered some! Thanks! I’ll be mag mounting mine but thanks for the idea!
Hi Jay, the L3901 is a great tractor. I think magnet mounted mirrors are even a better idea. Use neodymium or rare earth magnets for extra holding strength. Enjoy the new machine. God bless
Hope to make the list next year. LOL I watched Neil, Paul, and yourself before we pulled the trigger on our Kubota. I am interested in the rear wheel spacer. These tractors may be small but they still can tip easily. Anything that would help is welcome.
Wheel spacers are almost necessary with the cab unit. I know I paid too much for mine as there are other cheaper alternatives. I strongly suggest joint the “Kubota BXer Network” and/or the “Kubota Tractors & Equipment” groups on Facebook. They each have a ton of resourceful members that you can ask questions and get answers within minutes.
Great mods and channel! One of the first mods I did to my 2370 was to cut 3inched off of the loader control stick. In my opinion it stuck out entirely to far and didn't look good, I think it looks much better now!
3 inches is quite a bit to cut off the FEL control. Hope you're liking that mod as I would imagine ergonomics would take priority to appearance. Thanks for the comment, keep on tractoring and God bless.
Hey Kioti Curt, youtube needs some more Kioti tractor videos and you're just the guy to do it. I would love to help you promote your channel if you wanted it to grow. Thanks for watching and God bless.
Jon Ritter Yes Jon we had hope to have other videos up by now ! But I have been sick and now my older brother that was in the Navy from nc. Is in ICU and they say he will not make it I have been asking Kathy how to set up a youcaring page to help pay bills and for a up coming funeral ! I have other videos on our other channel just skidsteer and truck stuff ! We still wound to try to get some Kioti videos up but stuff is not working out that way ! Curt
Sounds like things are pretty tough right now. Hope your brother isn't in any pain. So sorry to hear about that. Will definitely be praying for you and your family. Take care my friend.
I'd of put the LED strobes on the top of the ROPS facing both front & rear. My BX-2380 turn signals came mounted on the top section of the ROPS. IMHO strobes need to be as conspicuous as possible for the benefit of the occasional, somewhat blind car drivers who can't drive in the snow when you're plowing or blowing snow.
Can you please link the Paul Short video for the edge molding? I’ve been looking for days and can’t find it. Or do you have more info? What molding did you use? Thank you!
His remember his video doesn't go into detail about the edge molding and I couldn't find it either. However, I bought edge molding for my new tractor that isn't the same stuff I had on my BX25 but is basically similar. I found it on amazon. It's called edge molding or door molding. it's fairly inexpensive about $15. Get yourself 20' of it and that should me enough. Keep on tractoring and God bless.
Great video. You haven`t had a problem with the tie rod boots yet? Tore the boot on my B series pushing brush on the first day of ownership. I used duck tape to repair it because Kubota showed you could only get it with the tie rod assembly. Paul short showed a mod using a new urethane boot .I ordered some from him for the "B" in hopes it would work on it . They work but are a little tight and they are tough compared to the original.Hope this helps if any one needs a great tie rod boot.
The biggest reason I got it was for the receiver hitch option which also meant I could use a cargo rack for my sprayer or quickly add ballast instead of hooking up another three point implement. I also like the way mine is constructed vs some of the others. Any hitch with a receiver is the way to go in my opinion. Best of luck. Thanks for watching. God bless.
New BX1880 owner, & i enjoy the information but would be wonderful to see some actual links to the products to make it easier to find tings like the switches etc. Thanks Mike
It's November 2020 and my 2020 BX 1880 has 4 hours on it. Have you made more Mods to yours since you made this comment. I have 1 1/4 rear wheel spacers all new lights wheel weights a Kubota cutting edge and R2 manufactured edge tamers so far. I do not cut grass at all with mine and bought it simply for plowing my gravel drive and bucket chores around my 2 acre property here in Michigan
@@kagnewmp12 Things I have done since I purchased the tractor Kubota Deluxe Wheel Spinner - 77700-01540 - a MUST have. Durafit Seat Covers, KU09 Savanna Kubota Seat Covers for tractor B2320,B2620,B2920,B3200,B7410,B7510,B7610,B7800,BX1850,BX2350,BX24,BX25,M5640,M7040 Great Day TT400 Tractor Tool-Tray Original Quick Fist Clamp for mounting tools & equipment 1" - 2-1/4" diameter (Pack of 2) holds weed whacker & or other tools 3 point carry all king cutter box & built the box (fun project & very useful)(www.farmandfleet.com/products/343879-king-kutter-carry-all.html) Piranha tool bar from bx expanded (bxpanded.com/BX1800) Receiver for the Carry All Badlands 2500 Winch from Harbor Freight & bracket for the receiver, along with modifying the wiring so it can be attached or detached quickly. Boltonhooks.com hooks for bucket Replacement lights for tractor LED50W white 896 881 www.amazon.com/gp/product/B00NJ9MZH0/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 Work lights Rigid #202213 for ROPS bar so I can see while plowing or using the bucket in the dark 0010141008 Kubota BX1800 Rear 1.5 In Spacers $180.00 Bro-Tek Filled the rear tires with with Rim Guard for extra weight & stability I think that is about it. have just over 100 hours on it at present.
@@mikematyasic9329 Well I can see you take pride in your machine. I'm still a work in progress as I just hit a big 7 hours on my tractor. I will be adding those same spacers and haven't decided on filling my tires with Rim Guard yet as I have chains and wheel weights plus my drive is almost level. I have no plans to use it for mowing as I use a new zero turn to cut my 2 acres. Thanks
None of the mods I shown in this video would void your warranty. The only issue would be compromising the ROPS with the four holes I drilled for the lights. Many many mod ideas out there. Have fun!! God bless
Hey Jon, I want to get those exact wheel spacers, I bought another and they don't have the center hub, plus I can't get a 13/16 socket in the holes, please let me know where to get the ones you have. Thx Kevin in Cincinnati
I removed a 20' x 40' in ground liner pool, wall sections, steps and the liner with a BX22. Then moved everything out to the front of the house for pickup by the scrap man in 12 hrs. Can't beat a BX TLB.
That sounds like a big job for a little BX, but I bet you had fun getting it done. No more swimming for you, tractor time is more fun anyway. Keep on tractoring!
When you did your light bar mods did you drill into the ROPS? If not, how did you mount the lights? I have the lights but have been hesitant to drill into the ROPS and I haven't found a set of U bolts that fit properly. Great video as always.
I did drill into my ROPS and used a stainless sheet metal screw with a lock washer. If I were to do it again I might do it a little differently with a square u-bolt. Keep looking around for those 3 inch square u-bolts. I used them for my toolbox. The lights are a great accessory. Keep on tractoring and God bless.
I've been considering putting a light bar on my JD1025r. Have you got a link of the light bar you did purchase? There are so many that simply look cheap, then some that look just as cheap but cost a ton more. Thanks!!
Like I've said in a previous comment you really just gotta read the reviews people leave on those light bars. I bought mine on e-bay and yes there are a ton of options and most of them are great lights. Best of luck! God bless
Pretty certain this is the one I have. www.ebay.com/itm/14inch-72W-Led-Work-Light-Bar-Combo-Boat-Jeep-Driving-Lamp-Off-road-4WD-Epistar-/282266832339?hash=item41b86a0dd3:g:ycMAAOSw7GRZCrKh&vxp=mtr
Thank you for the reply. We will give that one a shot!! Getting ready to push some snow. With a high of about 60 degrees in August, kind of getting me in that mood!!! Make it a great day!!
Hi Mike, my snowblower is actually just 50 inches wide and the spacers aren't really an issue with it. It must be pretty close. I've never noticed. Thanks for watching, God bless.
Lookup edge molding on e-bay and I'm sure you'll find something similar. It's really a cheap and easy mod. I bet your loving that new BX23S. Wish I had one. Thanks for watching, keep on tractoring and God bless.
I think u could've trimmed about 10 minutes off this video. I like some of ur mods... I'll certainly be doing some of those on my BX. Don't take it personal it's just some constructive criticism.
it is a 14 inch light bar and it came from e-bay. I can't remember the site but e-bay has a ton of different options. Read the reviews and make your best choice. I might upgrade to an even larger light bar not because I need to but because I can and more light the better, right. Thanks for watching and God bless.
I figured that particular mod was going to spark some interest. I think I'm going to have to do a follow up video just to answer it as it's a little difficult to explain. I wish I would have documented that auxiliary fuse box mod. Thanks for watching and stay tuned for the answer. God bless.
thats why love kubotas they let ya put add ons on them wich is nice wich deeres dont have room on theres and deere dealer doesnt like modications on the tractor wich the deere dealers here doesnt like customers put mods on the deere wich kubota dealer is great ful wich why my kubota dealer gives customers more money towards of the trade ins wich is nice
Hi Greg, I actually drilled into my ROPS. If I were to do it again I'd u-bolt a piece of angle iron to the ROPS and attach the lights to it. Best of luck. Thanks for watching and God bless.
It’s a 23 go Diesel engine. Extremely fuel efficient. A base BX23S which what I have now is about 18k. They are great machines if your thinking about getting one. Keep on tractoring!
I shined it up all nice and pretty just for this video so thanks for noticing. The tomatoes are doing ok. I think they'll be in better shape if we get some more rain. I've been watering them but city water doesn't work as well as natural rain does. Thanks for the comment. God bless.
I'm not 100% sure but I think I found it on eBay for less than $20. It's a great way to go if you plan to add multiple accessories. Keep on tractoring!
I did but I’d suggest using U bolts or hose clamps to a piece of angle iron or something similar or even JB weld. No need to drill unnecessary holes into the ROPS. Keep on tractoring!
dont give it a thought Jon, I know how it is making these videos there is no way you could remember everyone. believe me I know that much for sure. I'm doing ok but its been a bumpy hot summer. I like that light bar and I may look into changing mine to one like yours. take care and enjoy the rest of your summer brother. Love and respect!
No doubt about it! Hate seeing people making videos of mods he came up with and they don't even bother to give him credit. Thanks for watching! God bless
Keep up the good videos, you as well as Paul & Kathy have inspired me to start making some more content for my channel! It's a little rocky but please feel free to watch, comment, like or subscribe! Thanks again!
Be careful, Paul has a tendency to talk you into buying all sorts of stuff. :-) Tractors, trailers accessories... more accessories... and tools! It's awesome though. Thanks for watching and I'll try and watch you as well. God bless.
LOL, I have already found that my bank account needs to grow in order to try and keep up with all the Mods and tools Paul has shown! My wishlist just keeps growing and growing! I think the first thing I plan on doing is buying a house with a barn on a couple maybe 5 acres before I go too far with Modding the BX. Just incase I upgrade to the BX25 or BX23. Thanks again and Keep on Tractoring! God Bless!
you should install a dimmer for when your on the edge of the road so you dont blind on coming cars. This is actually a huge problem. Everyone is trying to find the brightest lights they can for their equipment and i understand the need to see but people need to think about others.
You bring up a good point. I’ve always tried to be considerate to others and turn my bright lights off when cars are around. It would be nice if there was a automatic dimmer that only engaged when it senses headlights. My road is t very busy so it’s not a huge concern.
Jon :: you were saying you wish your mirrors were higher, why not take a piece of 1/4"aluminum flat bar or flat steel bar and cut it to the length you want your marriage to be in height.
That's something to think about, but I don't think it would look as nice. I'm trying to think of a system that would come around from the ROPS that would look somewhat decent. Might be a distant future mod. Thanks for watching and God bless.
Nope, been there done that with the fuse box. Wired mine to the relay as well. Good mods. Check my channel out if you haven't done so already. Did a bunch of mods myself. Art
Yeah, haven't had time to make vids. I always have some type of project going though. Maybe one of these days I can whip out the camera and make a video.
thats what my buddy at kubota sells the wheel spinner for $10 to $12.00 wich not bad wich the deere is $30.00 to $40.00 wich rediculas for a small wheel spinner
yeah thats why everyones going to my buddys kubota and case dealer wich alot of them leaving deeres now acully because dealer at john deere isnt good to them wich isnt good
You know if you were smart you'd undercoat that tractor then it don't rust doesn't have to be fancy just undercoated that way when it's wet and dirty and mucky you don't have to worry about the snow rusting it and it'll last forever
Never knew you did some of these mods. I guess I'm gonna have to look into trying some on the B2301. Thanks for the recommendations. I think I'll check them out, though I've heard of some of them before. Of course this goes without saying but yet again another great video that was well worth watching, Jon. Thanks for putting out content. We'll always be here to watch it. Take care, and God bless.
Thank you for the kind words Jackson! I bet you're getting all sorts of work done with that new B2301. Hope you are enjoying it! Take care and God bless.
Just a suggestion, but I switched the Wheel Spinner from the right side of the steering wheel to the left side. Allows using left hand to drive and right to work loader joystick which proved to be much more convenient. One of the best accessories I've ever added to any of the 3 different Kubotas I've owned over the years. Just beyond convenient!!
I just found what I can get my landscaper for ×-mas gifts.
Thank you man, great channell!!
I have never seen a tractor with tire shine. But, gotta respect the fact that you take pride in what you own.
Because of the condition of this tractor I traded it in with 400 hours on it for just $2000 less than what I paid for it. The condition really helps resale value. I like my stuff looking good.
Keep on tractoring!
I got a 2018 LS XG3025. I've completely abused it for 2 years now. I've done hardcore stuff with it that no one should ever do with a tractor its size and it has not given me any issues whatsoever. This tractor is a beast.
It outperforms my dad's Kubota L3600.
Those LS tractors are really nice machines! I've been impressed from what I've seen other you tubers doing with them. There are a lot of good tractor brands on the market right now.
Keep on tractoring!
The wheel spinner better known as the suicide knob... but that's for us tractor guys of way back when to know
thanks! nice mods! hoping to do the electrical changes to mine soon!
Steve Rob is the coolest guy from Muskrat Dam. Love his vids along with Paul and Kathy. Recently hooked up with Steve Morgan. His video are getting better and better. Really enjoy your video's too. From a Minnesotan 40 years removed.
I love Steve Rob's energy that he brings to every video he does. The outhouse build is hilarious to me and the fact that most videos he does involve him enjoying a beer. Steve Morgan's videos I like because they usually involve his tractor and he does a nice job with his commentary. God bless.
It's Mike Morgan. Sorry about that Mike.
Thanks for the shout out Jon! You sure keep the BX looking nice! I've got a video scheduled to post tomorrow and I mention you and your sweet dump trailer. Keep up the great work!
Thanks for noticing my shiny tractor. I took a page out of Paul's book and shined it up all nice and pretty before I did the video. LOL. Looking forward to seeing your next video. I enjoyed your garbage can hitch vid. I figure that exactly what I'll get when I get that 5-10 acre parcel some day with a long driveway. God bless
Jon Ritter I know you love your neighborhood you live in but I think you would have a blast out on some property to really play in! In the end, there is always pros and cons to both, gotta make yourself happy wherever you are!
Jon Ritter wish I could keep my kubota that clean. Do you use degreaser around main grease areas? My kubota used to be orange now black lol.
WD40 works great as a degreaser, don't spray it directly on as you don't want it getting inside the fitting. Rather spray some on a rag and wipe excess grease away. I also use wipe WD40 on all plastic parts such as the side panels, dash area and lever housings. Give it a try and keep on tractoring! God bless.
I'm getting a new BX23S this coming week and I can't wait to get it! LED's are going to be my first mod, but many others will surely follow. Thanks for the great ideas!
Congrats on getting a new machine! You’re going to love it! LEDs will really make a difference for you. Glad I was able to give you some ideas. Have fun!
God bless
Nice video and thanks for the shout out!
Thank you, keep putting good content out there. :-)
its great to watch all the kubota and case and stihl fans thumbs up for all the kubota fans out there cheers
You got itvright talking about Paul Short. He has actually made a video or 2 for me to help me out. The basic soldering video was made exclusivly for me. They took time out of their already extremely busy because of his business and helped another youtuber out. I realize he cant do that any more, so I cherish those times. I have gotten quite a few mods from Paul and Kathy ovef the years. Best $$ I ever spent. I have a few of them in my latest video, but have added more since then. I bought a brand new bx1880 back in April. They even allowed me to call her, yeah her, "Mini Killer". Killer and Lil Killer needed a lil Sister. They are truly 2 of the most AWESOME people around and I hope one day to meet them in person. Conversations on phone and sending messages and emails are 1 thing, but a 1 on 1 in real life, OH MAN! Thay would be so freakin AWESOME.
I remember Paul's soldering videos, I bought all the soldering tools he suggested and I try to follow the steps he showed in his videos. I sure appreciated him taking the time to show us all how to do things better. His modifications always looked factory made and that's what I liked most about his work. Fantastic fabricator and great people.
Keep on tractoring!
I have been over and over this video, I subbed also. I have a few of your mods, but my bx2380 has a whopping 1 hour on the clock. But, the mirrors, wheel spacers, top cover, some small stuff I have in the garage, awaiting the owner(me) to start. Great video, thanks for sharing. Oh, the added bar on the fel to help it keep up it life.
Glad you found this video useful! You can never have enough lights! 😁 Enjoy that new machine!
Keep on tractoring
Really love your videos. Thinking about making a channel and shooting some videos myself with my BX25D and my new K-008-3 Mini Excavator I just bought. I have a Go-Pro Hero 4 that I will use for the videos. Just been hesitant to start filming anything. Keep on tractoring.
I use a Gopro as well and I've been really happy with the quality. The nice thing is that you can edit and only show folks the good stuff and cut out all the screw ups. You'll get better with each one. Would love to see some more Kubota videos so get going! Looking forward to it. Keep on tractoring and God bless.
I just bought the bx 1880 an I love it an I will be putting the edging on my kubota
You should def color in the NO STEP in Kubota orange. Go on, you know you want to 😁
Good video,I follow most of those channels. I have a JD X-530 mower I use on about five acres.tricked out well for me. I love it.but someday I hope to get a compact tractor. I really use my wheel spinner ,was twelve dollars at my JD dealer. I find their prices competitive with everyone else.and their service is second to none. Have a great day!
Thanks for watching, take some time to check out the Kubota BX when you decide to upgrade to a compact tractor. Those wheel spinners make mowing much better. Keep on tractoring. God bless
Cool video nice mods on your Kubota BX25 I love Kubota I want to get a L2501. Keep on keeping on
Thanks! That L2501 is a nice machine. What will you be using it for mainly?
I love the edging mod!, Good for riding mowers, z turns..
Great video again Jon, Your tractor looks great and well presented, Keep up the good work
Thanks Neil, I enjoy making the videos and hope to keep finding the time to do so. God bless.
great video great shout out i too watch most of them
Thank you, and yes we have a strong Kubota/UA-cam community. God bless
Good vid Jon as always. I don't comment much but rest assured I'm watching. I also follow all of the guys and gals u mentioned. Keep on tractoting and be safe. One u didn't mention thats well worth checking out is David Dobbs. He is currently experiencing some health problems so all u folks keeps him in ur prayers. He would surely appreciate it. I'm done now!!!
Thank you and you're right, the only reason I forgot Dave is because he hasn't done a video lately and it was an oversight. I watch Daveknowshow but yes I'm worried about his health. I hope his cancer treatment works. Keeping him in my prayers. God bless
Hey bud have you added wheel spacers I can see aluminum on the wheel center?
Yes, I have two inch wheel spacers in the back and they really make a nice difference for stability.
Keep on tractoring!
Hi John.
Just bought an L3901. Haven’t even got it yet but was looking for mirrors. Stumbled upon your mirror idea and just ordered some! Thanks!
I’ll be mag mounting mine but thanks for the idea!
Hi Jay, the L3901 is a great tractor. I think magnet mounted mirrors are even a better idea. Use neodymium or rare earth magnets for extra holding strength.
Enjoy the new machine.
God bless
Cool mods and thanks for the shout out
Hope to make the list next year. LOL I watched Neil, Paul, and yourself before we pulled the trigger on our Kubota. I am interested in the rear wheel spacer. These tractors may be small but they still can tip easily. Anything that would help is welcome.
Wheel spacers are almost necessary with the cab unit. I know I paid too much for mine as there are other cheaper alternatives. I strongly suggest joint the “Kubota BXer Network” and/or the “Kubota Tractors & Equipment” groups on Facebook. They each have a ton of resourceful members that you can ask questions and get answers within minutes.
Thank you for your video. I picked up a BX2360 from a guy and I want to use these mods on my Kate.
Great mods and channel! One of the first mods I did to my 2370 was to cut 3inched off of the loader control stick. In my opinion it stuck out entirely to far and didn't look good, I think it looks much better now!
3 inches is quite a bit to cut off the FEL control. Hope you're liking that mod as I would imagine ergonomics would take priority to appearance. Thanks for the comment, keep on tractoring and God bless.
Nice video
Nice and clean BX Jon. Front FEL hooks is my next mod.
I've been thinking about that same mod myself. Kens bolt on hooks or Ai2 bucket hooks. Or I might just make my own.
Never heard of Ai2 - thanks for the lead. I'll have to try the WD40 for degreasing.
Where did you buy the edge moulding?
Great tee shirt!! I may just have to get myself one. 👍
Tractor is looking good Jon & all good channels take care god bless ! Kioti Curt :-)
Hey Kioti Curt, youtube needs some more Kioti tractor videos and you're just the guy to do it. I would love to help you promote your channel if you wanted it to grow. Thanks for watching and God bless.
Jon Ritter Yes Jon we had hope to have other videos up by now ! But I have been sick and now my older brother that was in the Navy from nc. Is in ICU and they say he will not make it I have been asking Kathy how to set up a youcaring page to help pay bills and for a up coming funeral ! I have other videos on our other channel just skidsteer and truck stuff ! We still wound to try to get some Kioti videos up but stuff is not working out that way ! Curt
Sounds like things are pretty tough right now. Hope your brother isn't in any pain. So sorry to hear about that. Will definitely be praying for you and your family. Take care my friend.
Thank you Jon !
Jon i dont know if you seen the video i put up for the fundraiser ? if you could would you share it if you can it will help out a lot ! thanks Curt
Do you have a list where I can buy all these parts and your videos on how to put this stuff together
I do not have links for this video. Is there anything in particular you’re thinking about?
Keep on tractoring!
What size or version of fender edging did you use?
That's a great question it was a while ago I did this mod. I'll see if I can find you a link.
amzn.to/3ZTxDGN
Keep on tractoring!
Hey Jon. What type of edge moulding did you use? I've tried a few different types and haven't been happy.
Used to put em on cars, called them "suicide knobs"
I'd of put the LED strobes on the top of the ROPS facing both front & rear. My BX-2380 turn signals came mounted on the top section of the ROPS. IMHO strobes need to be as conspicuous as possible for the benefit of the occasional, somewhat blind car drivers who can't drive in the snow when you're plowing or blowing snow.
Can you please link the Paul Short video for the edge molding? I’ve been looking for days and can’t find it. Or do you have more info? What molding did you use?
Thank you!
His remember his video doesn't go into detail about the edge molding and I couldn't find it either. However, I bought edge molding for my new tractor that isn't the same stuff I had on my BX25 but is basically similar. I found it on amazon. It's called edge molding or door molding. it's fairly inexpensive about $15. Get yourself 20' of it and that should me enough.
Keep on tractoring and God bless.
What are the exact measurements of your U Bolts for the “tool box”??
Thanks.
Great video. You haven`t had a problem with the tie rod boots yet? Tore the boot on my B series pushing brush on the first day of ownership. I used duck tape to repair it because Kubota showed you could only get it with the tie rod assembly. Paul short showed a mod using a new urethane boot .I ordered some from him for the "B" in hopes it would work on it . They work but are a little tight and they are tough compared to the original.Hope this helps if any one needs a great tie rod boot.
I am looking to get a 3 point hitch receiver soon. Any pros or cons for the style you have now vs the old style you used to use?
The biggest reason I got it was for the receiver hitch option which also meant I could use a cargo rack for my sprayer or quickly add ballast instead of hooking up another three point implement. I also like the way mine is constructed vs some of the others. Any hitch with a receiver is the way to go in my opinion. Best of luck. Thanks for watching. God bless.
Jon Ritter thanks for the info and another great video!
New BX1880 owner, & i enjoy the information but would be wonderful to see some actual links to the products to make it easier to find tings like the switches etc. Thanks Mike
It's November 2020 and my 2020 BX 1880 has 4 hours on it. Have you made more Mods to yours since you made this comment. I have 1 1/4 rear wheel spacers all new lights wheel weights a Kubota cutting edge and R2 manufactured edge tamers so far. I do not cut grass at all with mine and bought it simply for plowing my gravel drive and bucket chores around my 2 acre property here in Michigan
@@kagnewmp12 Things I have done since I purchased the tractor
Kubota Deluxe Wheel Spinner - 77700-01540 - a MUST have.
Durafit Seat Covers, KU09 Savanna Kubota Seat Covers for tractor B2320,B2620,B2920,B3200,B7410,B7510,B7610,B7800,BX1850,BX2350,BX24,BX25,M5640,M7040
Great Day TT400 Tractor Tool-Tray
Original Quick Fist Clamp for mounting tools & equipment 1" - 2-1/4" diameter (Pack of 2) holds weed whacker
& or other tools
3 point carry all king cutter box & built the box (fun project & very useful)(www.farmandfleet.com/products/343879-king-kutter-carry-all.html)
Piranha tool bar from bx expanded (bxpanded.com/BX1800)
Receiver for the Carry All
Badlands 2500 Winch from Harbor Freight & bracket for the receiver, along with modifying the wiring so it can be attached or detached quickly.
Boltonhooks.com hooks for bucket
Replacement lights for tractor LED50W white 896 881
www.amazon.com/gp/product/B00NJ9MZH0/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Work lights Rigid #202213
for ROPS bar so I can see while plowing or using the bucket in the dark
0010141008 Kubota BX1800 Rear 1.5 In Spacers $180.00 Bro-Tek
Filled the rear tires with with Rim Guard for extra weight & stability
I think that is about it. have just over 100 hours on it at present.
@@mikematyasic9329 Well I can see you take pride in your machine. I'm still a work in progress as I just hit a big 7 hours on my tractor. I will be adding those same spacers and haven't decided on filling my tires with Rim Guard yet as I have chains and wheel weights plus my drive is almost level. I have no plans to use it for mowing as I use a new zero turn to cut my 2 acres. Thanks
@@mikematyasic9329 Those LED lights you have a link to. Will they fit the BX 1880
@@kagnewmp12 yes. I have a BX 1880 as I mentioned in the opening line :) Have fun in your Kubota journey.
Does any of the mods void the warranty on a new tractor? Just bought a BX2380. Love to do some mods, but don't want to mess with the warranty.
None of the mods I shown in this video would void your warranty. The only issue would be compromising the ROPS with the four holes I drilled for the lights. Many many mod ideas out there. Have fun!!
God bless
nice looking machine. i have a 2007 BX 2350..... it only has 399 hours on it.
Hey Jon, I want to get those exact wheel spacers, I bought another and they don't have the center hub, plus I can't get a 13/16 socket in the holes, please let me know where to get the ones you have. Thx Kevin in Cincinnati
Watched your video on accesories,were did you buy your edge molding that you applied to rear fenders etc.
Thanks in advance,
Roger
I either got it on Amazon or E-bay. I buy pretty much everything online these days. It's an easy inexpensive mod. Have fun and God bless.
I removed a 20' x 40' in ground liner pool, wall sections, steps and the liner with a BX22. Then moved everything out to the front of the house for pickup by the scrap man in 12 hrs. Can't beat a BX TLB.
That sounds like a big job for a little BX, but I bet you had fun getting it done. No more swimming for you, tractor time is more fun anyway.
Keep on tractoring!
@@ritterjon If you have your email posted somewhere I can send you a few pics....
When you did your light bar mods did you drill into the ROPS? If not, how did you mount the lights? I have the lights but have been hesitant to drill into the ROPS and I haven't found a set of U bolts that fit properly. Great video as always.
I did drill into my ROPS and used a stainless sheet metal screw with a lock washer. If I were to do it again I might do it a little differently with a square u-bolt. Keep looking around for those 3 inch square u-bolts. I used them for my toolbox. The lights are a great accessory. Keep on tractoring and God bless.
I've been considering putting a light bar on my JD1025r. Have you got a link of the light bar you did purchase? There are so many that simply look cheap, then some that look just as cheap but cost a ton more. Thanks!!
Like I've said in a previous comment you really just gotta read the reviews people leave on those light bars. I bought mine on e-bay and yes there are a ton of options and most of them are great lights. Best of luck! God bless
Pretty certain this is the one I have. www.ebay.com/itm/14inch-72W-Led-Work-Light-Bar-Combo-Boat-Jeep-Driving-Lamp-Off-road-4WD-Epistar-/282266832339?hash=item41b86a0dd3:g:ycMAAOSw7GRZCrKh&vxp=mtr
Thank you for the reply. We will give that one a shot!! Getting ready to push some snow. With a high of about 60 degrees in August, kind of getting me in that mood!!! Make it a great day!!
With the 2in spacers. Do your tracks stay within the width of your 54in snowblower enough?
Hi Mike, my snowblower is actually just 50 inches wide and the spacers aren't really an issue with it. It must be pretty close. I've never noticed. Thanks for watching, God bless.
Great video Jon , were did you get the black finish edging from , looks great , need some for my BX23S.
Keep em coming
Lookup edge molding on e-bay and I'm sure you'll find something similar. It's really a cheap and easy mod. I bet your loving that new BX23S. Wish I had one. Thanks for watching, keep on tractoring and God bless.
I think u could've trimmed about 10 minutes off this video. I like some of ur mods... I'll certainly be doing some of those on my BX. Don't take it personal it's just some constructive criticism.
Great video Jon. Can you tell me the size of the light bar on the rops, and where did you get it.
it is a 14 inch light bar and it came from e-bay. I can't remember the site but e-bay has a ton of different options. Read the reviews and make your best choice. I might upgrade to an even larger light bar not because I need to but because I can and more light the better, right. Thanks for watching and God bless.
Jon, where did you find a connection point to get power when key is on?
I figured that particular mod was going to spark some interest. I think I'm going to have to do a follow up video just to answer it as it's a little difficult to explain. I wish I would have documented that auxiliary fuse box mod. Thanks for watching and stay tuned for the answer. God bless.
thats why love kubotas they let ya put add ons on them wich is nice wich deeres dont have room on theres and deere dealer doesnt like modications on the tractor wich the deere dealers here doesnt like customers put mods on the deere wich kubota dealer is great ful wich why my kubota dealer gives customers more money towards of the trade ins wich is nice
Great video Jon.. where did you purchased the head-light bulbs?
just like most thing I got them off on e-bay or amazon. I know they were only about $20 for the pair. Thanks for watching! God bless.
John, Great video! How did you mount the light bar on the ROPS?
Hi Greg, I actually drilled into my ROPS. If I were to do it again I'd u-bolt a piece of angle iron to the ROPS and attach the lights to it. Best of luck. Thanks for watching and God bless.
Hey buddy is your tractor diesel or gas and what is the price on that if you can say I think it's awesome.
It’s a 23 go Diesel engine. Extremely fuel efficient. A base BX23S which what I have now is about 18k. They are great machines if your thinking about getting one.
Keep on tractoring!
Check out gp outdoors. He is in canada, has a kubota b2601. Awesome guy.
Oh Jon, you got that tractor some clean! How are the transplanted tomatoes doing?
I shined it up all nice and pretty just for this video so thanks for noticing. The tomatoes are doing ok. I think they'll be in better shape if we get some more rain. I've been watering them but city water doesn't work as well as natural rain does. Thanks for the comment. God bless.
Please consider putting Toolbox should be on the outside of ROPS in my opinion to protect the body of the seated person in case of an accident.
Where did you purchase the auxiliary fuse panel? I didn't see it listed on the bxpanded.com website. Good video!
I'm not 100% sure but I think I found it on eBay for less than $20. It's a great way to go if you plan to add multiple accessories.
Keep on tractoring!
Great job , did you drill threw the rops bar?
I did but I’d suggest using U bolts or hose clamps to a piece of angle iron or something similar or even JB weld. No need to drill unnecessary holes into the ROPS.
Keep on tractoring!
very cool.
I owe you an apology for forgetting to mention you. I'll make it up to you soon. Hope all is going well. Take care Dave. God bless.
dont give it a thought Jon, I know how it is making these videos there is no way you could remember everyone. believe me I know that much for sure. I'm doing ok but its been a bumpy hot summer. I like that light bar and I may look into changing mine to one like yours. take care and enjoy the rest of your summer brother. Love and respect!
Hey, there was some dirt on it!
WHAT!! WHERE?? :-)
Paul Short is the King of Mods!
No doubt about it! Hate seeing people making videos of mods he came up with and they don't even bother to give him credit. Thanks for watching! God bless
just a small item you should do on the front of the cutting weld reo in the front saves your deck from damage eric australia
Not a bad idea. No cutting deck doesn't take too much abuse though. I use my flail mower for heavy brush.
Keep on tractoring!
Keep up the good videos, you as well as Paul & Kathy have inspired me to start making some more content for my channel! It's a little rocky but please feel free to watch, comment, like or subscribe! Thanks again!
Be careful, Paul has a tendency to talk you into buying all sorts of stuff. :-) Tractors, trailers accessories... more accessories... and tools! It's awesome though. Thanks for watching and I'll try and watch you as well. God bless.
LOL, I have already found that my bank account needs to grow in order to try and keep up with all the Mods and tools Paul has shown! My wishlist just keeps growing and growing! I think the first thing I plan on doing is buying a house with a barn on a couple maybe 5 acres before I go too far with Modding the BX. Just incase I upgrade to the BX25 or BX23. Thanks again and Keep on Tractoring! God Bless!
I hope you’ve placed your order with Paul for the Light guards he’s made !
you should install a dimmer for when your on the edge of the road so you dont blind on coming cars. This is actually a huge problem. Everyone is trying to find the brightest lights they can for their equipment and i understand the need to see but people need to think about others.
You bring up a good point. I’ve always tried to be considerate to others and turn my bright lights off when cars are around. It would be nice if there was a automatic dimmer that only engaged when it senses headlights. My road is t very busy so it’s not a huge concern.
If you want the ultimate mod to Increase your comfort. Check out a Rhinohide Easy Off/On
Jon :: you were saying you wish your mirrors were higher, why not take a piece of 1/4"aluminum flat bar or flat steel bar and cut it to the length you want your marriage to be in height.
That's something to think about, but I don't think it would look as nice. I'm trying to think of a system that would come around from the ROPS that would look somewhat decent. Might be a distant future mod. Thanks for watching and God bless.
Please do a video of you hauling your tractor with your truck and trailer
Another good one to watch is dlh farms
Nope, been there done that with the fuse box. Wired mine to the relay as well. Good mods. Check my channel out if you haven't done so already. Did a bunch of mods myself. Art
AH yes, I am subscribed to your channel but I haven't seen anything recent from you in awhile. Keep on tractoing and God bless.
Yeah, haven't had time to make vids. I always have some type of project going though. Maybe one of these days I can whip out the camera and make a video.
Where is the fire extinguisher? Just curious.
Living dangerously I guess.
thats what my buddy at kubota sells the wheel spinner for $10 to $12.00 wich not bad wich the deere is $30.00 to $40.00 wich rediculas for a small wheel spinner
Just reason number 5432 not to buy a Deere. Accessories and replacement parts are astronomical. Thanks for watching. God bless.
yeah thats why everyones going to my buddys kubota and case dealer wich alot of them leaving deeres now acully because dealer at john deere isnt good to them wich isnt good
a good one to look at is andrew cabarata only a young man but is a very good try him
I cant get that name for the mirrors can you spell it out for me I got there on amazon.
Tijuana taxi or taco cart !!
Pssssssssss......
Suicide knob is what the "Spinner" is called.... years ago folks used to put them on cars and trucks as well...
Drilling holes in ROPS or Loader Frame can reduce the strength, no matter how small. U bolts highly recommended.
Wow do you actually use it
Mark Mayack Nope, spend most my time just looking at it. 👀
You know if you were smart you'd undercoat that tractor then it don't rust doesn't have to be fancy just undercoated that way when it's wet and dirty and mucky you don't have to worry about the snow rusting it and it'll last forever
remember the cutting deck is the weakest part on the mower the metal is to thin on all mowers