I got sick of sliding my mower deck in and out too. Now I only use my loader to install and remove it. Drive up to your mower deck until the front tires touch it then point the bucket down in almost full dump position and lift the front up until the tires will clear the deck. Roll it back, lower back down and install as normal. To remove, unhook all linkages, lift front end with loader, roll deck forward and resume the rest of your day.
@@PeeksPeakHobbyHomestead I saw someone else on UA-cam do it and have done it that way since. I can’t find that video now or I’d give them credit. Give it a shot and post up your own video on it.
I have the BX25. My front tires went bad so when I replaced them, I had them foam filled. I have never had another problem with the tires going flat. Put lights on on the tall ROPS. Works great!
Mid-Mount PTO shaft: Add/Remove when "cold" as possible and I have found to just "push it on there" BEFORE I "pull the collar back". Once it's "on there" and "started", can pull the collar back and click it on much easier.
I agree with all your complaints about the BX 1880. I cut my roll bar down. Yes i understand that it will be addressed on the day I sell it. I added 2 off road lights on the front and the back and at my feet. I cut grass after sundown because it’s cooler temperature. But that pesky mower deck. Boy oh boy. I drive the front wheels on 4” blocks and lift the back wheels to ease the pain of hooking up that drive shaft. Enjoying your videos. I live in Newfoundland 🇨🇦
Just ran across your video and I'd lie to share some of the things I've done with mine. First I bought it in late 2016. It's a 25D. I'll address each issue as I see it. Never had an issue with cutting front tires. I have had an issue with them coming off the rim because I failed to diligently keep an eye on the pressure. They are such low profile I never realize they were low until they are rolling off the rim. I've ruined 2 tires so far but hopefully have learned my lesson by now. I agree with the mid deck. it is a pain in the ass however much I've read about the drive on, they are a hit and miss too. My solution was to replace my small zero turn mower with a 60" commercial grade zero turn. They are way better and faster at mowing. I sold my mid deck which solved that problem. As far as the backhoe, I've dug up a few trenches and at least 40 tree stumps. I love it. I made a roll around carriage for it so when I unload it, I can roll it in the corner out of the way. Also makes it easy to hook back up when you can move it around easily. To address the rops height, after running into a few things, I bought one of those skinny fiberglass mast they sell for bicycles with the little flag on top. I mounted it on the floor right against the left loader bracket and cut it 1" taller than the rops. It is now in front of me and it will hit/scrape anything not tall enough for the rops. It has saved me several times. I dont switch between the 3pt and backhoe as much as you so I really dont have much issue with the 3 pt. As a matter of fact I made a bracket for the 3 pt which as a 250lb weight, 2 holders for a shovel and rake, a good size tool box mounted on the top, and a power inverter mounted on the tool box. These days that pretty much is on 75% of the time. I dont think I've ever used mine at night so I can't comment on the lighting. Lastly since I dont have a mid mower I installed one of those skid plates from BXPanded. A very nice piece. Easy to take on and off if you still want to use the mid mower. To bad I can upload a few pictures. Might give you a better idea. Like you said, despite all the little drawbacks, it is a work horse and I'll go before it does.
I have a bx 2230 and my two best mods - made a skid plate for underneath and added 2" wheel extenders on rear wheels. Have hilly land and a lot of under brush. Great improvements.
@@PeeksPeakHobbyHomestead *First, THANK YOU for this great video! We finally had enough of the nonsense, and moved in to an extremely rural home (as in 2 months ago). We **_definitely_** made the right decision, but the learning curve is much higher than I expected - the tractor has ben the most difficult. Our place came with a 1994 AGCO-Allis, which I have been able to figure out is closest to the Kubota series of garden tractors, so I'm looking at every video I can find to learn what I can. If the thing hadn't come with the extreme low use (less than 900 hours), and in such amazing condition (except for the seat, it looks nearly new), I would likely have sold it and shopped for a more modern machine, but saving all of that money is really important right now (between the purchase and the move of several hundred miles), so I've decided that learning about this machine and keeping it is a better plan than buying a newer (or actually new) model and dumping more of that scarce cash; your video was a **_really_** good overview of this device, and I am **_genuinely_** grateful for you posting it!* *If you take "requests", I'm looking for a good operating tutorial, as the transmission is making me crazy in short order :-/ I've got more than a million miles as a car driver, but the experience is so **_completely_** different on a tractor, that I am a little scared of it every time I turn it on. We bought a place with a little over an acre of very hilly back yard, so driving over it on a machine I'm uncomfortable with can be a draining experience - your overview helped a LOT more than you probably think, so I am grateful for the great video! I'm subbed, and will start working my way through your "catalog" today!*
Use lynch pins in the anti scalp wheel shafts then you can turn them easier. Also lift the tractor with the bucket and outriggers just a bit and the MMM slips right out or in. And it makes it easier to hook up the mid PTO because you have more room. I don't have trouble with the MMM and I'm a month shy of 70 yrs old. I also use a 2 X4 to push it out so I don't have to get out of my wheelchair.
Yup, deck removal and install is a pain. I do turn the casters because I'm 70 with Arthritis. I also have to remove a back tire to connect the shaft. I only do it twice a year so I can live with it. And I'm glad I have it.
To remember to lower the Rops, I have a roll of ‘bird tape’ shiny red/silver streamer to tie in trees to scare birds away. I cut long streamers and tape the ends on inside of my garage door, when I open the garage door the tape hangs down and blows in the wind, giving me a warning to stop and let the Rops down. When garage door is down, the streamers are not in the way. Works great and only $2.00.
Right on! I use mine for everything! Hope all is well in your area of East KY! We are a couple hours from the flooding, but lots of folks are having a tough time! 👊
@@PeeksPeakHobbyHomestead we are good in my area, I’m 40 min from the heaviest flooding. It’s crazy at how fast it came lots of folks lost everything. Thanks for checking buddy! I enjoy seeing a fellow Kentuckian put out great content!
I'm right there with you. I got the Bxpanded tool box that mounts on the right side of the ROPS facing forward and it's been a great addition for some small tools, tape measure, gloves, safety glasses, Sun screen etc. Man, #8... you are right on point. I absolutely love my 23S. Approaching the 50 hrs mark and she's been doing great on my 1 acre property.
I almost went with the ROPS mount for the toolbox, but I’ve got a couple of really tight trails I barely fit through. I decided against it…. Thanks for watching!
Until recently I owned two BXs (long story), I now own a BX and ZD1211 ZTR. Mods were rear wheel spacers, weights or filled rear tires, Bro-Tec belly pans, swapped OEM stabilizers for adjustable slides, tail light and hazard light protectors from Paul Short, modified rear wheel lock pad from Paul Short and rear hitch. The JD1025R I bought thinking it was the bees knees now lives at one of our sons house.
Mid mount mower installation issue: I use a tow strap to install and remove the deck. The hooks on my strap do not have safety latches. The inner diameter of the hook closely matches the od of the metal rod of the scalping wheels. Once everything is disconnected, I put the hooks on, step into the loop (facing the tractor) and lay it across my lower back/hips. I then walk/push backwards dragging it out and use my hands to direct where I’m applying the pull while working the deck around the wheels. To reinstall it I pull the tractor beside the deck and throw the hooks under the tractor and drag it back through from the side of the tractor opposite the deck. I do this on gravel and it still works. You of course still have to make the final adjustments on your knees or bent over but at least most of the dragging can be done standing upright. I hope this helps. Thanks for the video.
That is a pretty good solution. I’ve since learned how to reach over the deck with the FEL and raise the front tires up in the air so I can roll the deck straight back. This has become my new method of installation. Takes a little practice. Overall it works well.
2020 BX23S owner. I am not using mine with the same hours as you, but. . . I have the ride over mover deck, and the only thing easy is in the name. If you dont have it on flat, level, concrete you will have problems. Most of the time i need a second person to hold it from getting pushed forward when i try to drive over it. I have also found out it is mostly a finishing deck, so not great for field cutting. So i have overheating issues that extend the amount of time it takes to cut the grass. Popped a wheelie once bringing it back and forgetting the bar was up. Moving the seat to use the back hoe is a pain. The tractor is a beast though. Grading, fertilizing, snow removal, and a bunch of stuff i havent done yet, but will in the future, super happy with it.
I love my BX23S but I am with you on all of your complaints. The belly skid plate to protect the fan and light bars on the ROPS and other mods that many BX owners do to their tractors should be standard equipment in my opinion. In addition to those, my front end loader is SUPER sensitive when lowering it while it is loaded. There may be a way to fix that but I haven't done it yet. Great video!
I have a BX24D. I am 76, and yes, pulling the deck out each year is a pain, but I still manage it. Not going to pay for a "roll over" model! I love my BX, and it does great mowing, I have hilly ground, and locking the 4 wheel it will climb a mountain! Good video, but some of your complaints were things of your own doing. I removed the top of my ROPS, might be dumb, but I got tired of running into tree branches. Don't need to carry a bunch of tools, only have 6 acres to care for. Be careful of where you drive, and don't wreck your tires, or fan. I have had my BX since 2005. Now for the complaints. I have a major problem with sputtering and stalling, even though I have drained and flushed the fuel tank, replaced both fuel filters, fuel pump, and solenoid . 950 hours, and I think the next step will be to replace the injectors. Don't have any more answers. Fuel is clean, run it in my wife's GR2100 diesel, and she has no problems. Only other complaint is a lack of qualified Kubota mechanics available here in the mid west.
Yeah, this honestly isn’t a real complaint video anyway. Just a way to get people’s attention and share some of the “issues” I’ve had. Hoping it helps people know what to look out for. Thanks for watching and commenting!
@@PeeksPeakHobbyHomestead I Have the BX 25D and I had the same problem as you have or had. I guess I took my BX apart 4 to 5 times before I found the problem. There was a rubber gasket inside the fuel tank which in time it worked loose and started blocking the Fuels outlet hole. I Hope you have found your problem by now. The only thing I don't like about my BX 25D Is in order to change the fuel filter under the tractor the mowing deck Has to be removed.
Headlight issue is an easy fix. I put a full width LED lightbar on my ROP`s. I added a LED work light to the rear. All these things are easy things to add to your BX23s.
Great video. Thanks for taking the time. I love my BX23-s as well. I have the drive over deck and I don't think it is any easier. My biggest complaint would be how difficult it is to swing the seat around to use the hoe. The seat barely clears the rops and if you are clearing a bunch of brush stumps really adds time to the job. On smaller digs I don't even swing it around but reach over the back of the seat.
Note: I found the source of my difficulty this past weekend. I have owned this tractor for nearly 3 years and just discovered the seat reclines. I raised the backrest up straight and now the seat swivels around much easier. Operator error I guess.
@@blacklab1059 yeah, i usually fold mine flat... if you didnt know that, you might not know there is a lever in the front that allows the WHOLE seat to lift up and fold forward.... This is a lifesaver if it has to sit out overnight or gets rained on, as the seat will stay dry.
@Tim M I discovered that at the same time!!! I can see where that would come in handy. Problem is, I don't know what I don't know. You think I would be better. I was raised on a farm. It is probably because the machine is so new. After all, I have only put 170 hours on it. 😉
What you do to make it easier is put your tractor up in the air with your bucket then you have plenty of room to work to get that deck off and out. Just thought you’d like to do.
Spot on with all of these, but my #1 is the center of gravity as it sits from the factory. I have had it in too many uncomfortable situations and one where it almost rolled. I have since added spacers which has helped tremendously.
What I did with a toolbox I use a ammo box drill, two holes in the sides of it got me a U-boat clamp and I clipped it to my bar and for the headlight problem I would’ve Amazon bought a LED bar light and placed it at the top on the inside of the bar works great. You could light up the world and it wasn’t very much money that I placed it on and off switch right beside my cupholder just thought you’d like to know
I am with you on Quick Hitch and mower PTO being a pain. And my first question was why dont they at least give us somewhere to put a toolbox? I am trying to figure out how to attach one to the ROPS. I replaced those key rings too with better pins. I would add that its a pain having to raise the mower fully before you can adjust the height limit on it. I went for the full tractor tires for best traction and as long as you dont turn aggressively with the power on full, they dont damage any grass. And I too would buy another in a heart beat..
I agree changing the 3 point hitch to the backhoe is a real PITA. I actually practiced it one day taking it on and off for a few hours and learned how do to it much quicker and easier but still whenever I have to change it I really dread it.
I have the drive over mower deck and it is a pain to remove and install. It used little folding ramps which are very frustrating. You also have to remove the deck to grease the pto shaft and idler pully and it is still a pain.
For better lighting I added large LED floods to the outside of the side post of the ROPS. They are mounted on pivots so I can point them forward for loader or mower work; can point them to the back for backhoe work.
I have a BX1500, early early model and have similar complaints. But I have to say, it never fails to start and always gets the job done, over 1100 hours later.
Loved your video. No long drawn out BS. This is about my '08 BX2350 bought new. I do not have a mower or backhoe, do not need them. Agree with the headlight issue. Poor design, and mine came with no toolbox! Bummer. BIG BIG GRIPE, my hr/tach meter died right after warranty ran out. Replacement cost, $600. Still haven't replaced it. But I really have to agree with your # 10. Man I've gotten a lot of work done with that little thing. Money well spent ! Thanks for the great video. I have subscribed! Thanks. bbs bota, Spokane Wa.
I think you hit on everything I dislike as well. That mmm deck!!!! That driveshaft!!!!! And I am 63 with back problems, it DONT get any easier. I will have to check my fan, I don’t think I have a problem, but I have to look. Ours is a 2016 with 1089 hrs. I have done every 100 hr service myself with Kubota parts. Only ever had 1 real issue, the tach went out at 72 hrs. Replaced under warranty. I’ve replaced 2 front tires, didn’t cut them, but the sidewall bulged , my fault ran over firewood. Replaced Steering knuckle seals also. GREAT TRACTOR!!!!! Thanks for the video. Am going to look into the toolbox problem!!!
Agree with 1. tires. I am fighting a leak on my front right tire now. 3. the 3 Point components are fiddly. 6. Headlights are rough. 8. The backhoe on mine has been a life saver for me! Great vid Lucas! Have a great week!
If your tire is aired down, does the bead retract off the rim? I believe the issue with the front tires leaking air at the bead, the rims are not manufactured to the right dimension to hold the tire bead on the rim.
That's what happen to mine keep going flat. I even took to tire shop 2 or 3 times. This last time side wall ripped a 1/2 inch hole in bad side wall. I found a shop foam filled dropped off on Friday and picked up Monday. Don't know why keep leaking around bead.
Lucas: yes there are some issues with the BX23S. I have solved a few that I dislike but generally I am happy with it. I have had it since March this year and have clocked almost 90 hours. I settled the light issue with LEDS on the ROP front and back. The storage is in an ammo box on the ROP, like every one else. The front tires are not designed for really rough terrain. My local HE tire shop have told me that. They recommend a better sidewall tire, which they can order for me. And YES I should have bought this tractor a few years ago. Take care and stay safe. PS: are the ladies running around in the crops yet?
I need to get on a lighting upgrade! I’ve meant to for a while. I’m an early riser so I don’t keep late hours much so I wouldn’t use them a lot, but it would be nice. I actually refer to you and the chickens in the video that will be out Saturday morning. 😂 I couldn’t bring myself to do it. Lol.
Talk about a workhorse, I had a BX 2200 for 23 years without a hiccup and with very little maintenance. I traded it in for BX 2680 because of the front end loader easy on easy off feature.
I have about 1400 hours on my BX2660 and know your pain on the mower.... my other pain is the hood/side shields. I put 110 hours on the loader in the winter darkness the first year I had it (couldn't afford a snow blower yet) and agree about the headlights.
I have a 2005, same as you I bought the floor model in 2006. It's got 500+ hours so far with no major complaints about the functions. The 3pt hitch? I have a backhoe and never take it off, so that's not a problem. the backhoe footwells are also a good place to put tools. The ROPS? Mine might be a little lower because I can get into my garage with a less than 8 foot door. The lights I agree. I usually have the bucket up above the lights so I can see, but then it's right in my line of sight. One complaint I have is they loaded the tires with a sodium solution at the dealer. Within 7-8 years BOTH rear rims rotted out from the inside. Luckily the fronts have both gone flat at times and that solution leaked out long ago. You might get lucky because i hear they don't use that anymore. Right now it won't start and I think I have a safety switch problem. Which is what brought me here.
Thanks for the comment. First place I always check when it won’t crank is the HST pedal. Make sure it is “home”. Then PTO. Good luck. I hope it is something simple!
@@PeeksPeakHobbyHomestead HST pedal? Forward/reverse pedal? I wasn't thinking I had one there. I was thinking it was the switch on the high/low/neutral lever. I have had to jiggle that lever to get it to start before. Started fine yesterday, but today I get nothing. Even jiggling it around the neutral position. That's what brought me to your video. I was looking for a video that showed where it is.
Dude you got 400 hours of seat time. You know your Tractor. I do this for a living. I’m about to get my 4th Tractor. That’s how I ended up on your site. We need everyone’s feedback to keep all of us running. All legitimate complaints. All that would bug me too. I bought a 33 hp Tractor, wanted more muscle so I got a Deere 50 hp and found it way too big for my clients. Then purchased a 40 HP Tractor. It’s very nice but I’m thinking about another one. Maybe TLB on a medium Frame. Thanks for the good information.
i BOUGHT MINE IN MARCH OF '20. iT IS A '10 MODEL. Got a lot more hrs on mine. Like 1200 and today i am changing the Trans fluid for 3rd time. I dont have a lift but i run it up on a plank on my drive held up by 4 cement blocks and then I can get under it with ease. My drive has a slop to it. Where they put the filter is just nuts. It is hard to get at. Next is the seat. All it will do is turn around. There is no adjustment to it anywhere. I'm just 5'6" tall with a 29" inseam. The seat is set for someone well over my height. Like someone over 6' with at least a 35" inseam. This means that they built this thing so that less then 29% of pop will be comfortable riding it. I have to sit well forward on the seat to reach the paddles. This makes it very tiring to run. Then there is the drive saft for the front wheels. It is open to the air and will bet stuff tangled up around it. I did this the first month I had it. It did in the front seal on that drive shaft. I had to get a new one and put it on. Big hassle. It should be in a protective shield so this will not happen. Then there are the 2 pins that hold the backhoe on. They are very hard to get ot work. I have to beat on them to get them to work. Then there is putting it back on. Takes forever to get it lined up so u can do this. Last is that little filter screen u have to take out of the back. Real hard to get out. They need to put a pull something on it so that it will come out with ease. Dont have the lawn mower b/c I collect grass and compost it for garden. I looked into buy one but they wanted 1/4 of what i paid for Tracker and I cant even move such a thing around at 76. I have a Husqvarna 42' to mow my 3 ac lawn. Even they dont make a good bagger for it. I had to get an aftermarket one what was built a lot strong after just 2 seasons. So u see even top names blow it a lot when they try to make things as cheap as they can I would be will to pay a lot more for something well made rather then the shit they make today. Btw I am a Hay farmer with beef on the side. Make most of my money selling hay to an organic dairy farm in S CA. I own 6 other trackers. All build before 1990. I bought the little BX b/c I need its backhoe. Ya I do a lot of work with the little one but I would really like it if they would come out with a new seat that will move forwards and back. I live where water, to much not to little) is problem. Got the Bx to dig drains on new land. Old land has them already Paid someone to dig them. Got tired of paying out more then the Bx cost every yr to do this. have saved over 40G's already with it.
I have a Bx2200 that I bought used with my home. I love that little tractor. I put the ag tires on it because the turf ones it came with kept getting me stuck. As far as tool boxes go I mounted a cheap metal Harbor Freight one on the left side of the tractor where the ROPS goes. I removed my ROPS because it was an issue. One was when I first got the tractor I did a wheelie and slammed back down when my ROPS caught a large branch. I am surprised nothing broke. All in all it packs a lot of power in that little package and it would take something really nice for me to trade it away.
JAKE: Would strongly suggest putting the ROPS back on - I hit a branch yesterday too, but the time rolled over it was comforting to know I was covered. Perhaps cut it down a foot and reattach.
Removing your Rops is probably the biggest risk you can take, you can’t cut it down as it is engineered to specification for your machine. If you hit a tree branch you can hardly blame the machine, that’s operator error. I don’t need to tell you what the consequences are if you roll the machine and Rops uninstalled. Add no seat belt and you probably won’t get to read this comment, ever.
@@bigdaddydoggy4842 Really the biggest risk? LOL. Well 10 years later no problems with the rops bar unbolted on the floor of the garage. I guess I should install rops on my antique tractors too so the arm chair safety officers can feel better?
Hey there, great video. My absolute biggest pet peeve with mine is forgetting the brake on. O constantly forget to take off the brake and wish there was something to let me know the brake is on. Cheers.
I’ve heard other folks complain about that. I might suggest to make sure your parking brake is properly adjusted. Mine even when set on the first click will pull the motor down if I try to take off with the brake on. Maybe that will help you out. Thanks for watching and commenting!
Ha! As you are going through the list each one of your issues are the same as on a 2006 BX24. Looks like they did take the time to listen to owners for the last 15 years lol. There is a decent BXpanded options for an ammo case mount, that attached to the ROPs bar. The HST fan on the BX24 is not as simple to change, the engine needs to slide forward (Not a big issue) In my case the plastic got brittle, so even with a guard It was pretty much falling apart.
I’ve got about for about 2 weeks and 18hrs on my massy 1723eb…..I love it,my only gripe is the rear fenders and plastic and the keys didn’t have anything on them to indicate what they are for….but 23,300 for the tractor backhoe with thumb,front loader and 60 inch drive over deck….free shipping to anywhere in the USA from Bruno’s….the iseki 1.1 liter is just crazy good on fuel because it’s setup to run at 2600 rpm for your 540pto speed…it’s sounds like a legit tractor….it came with the three point arms tucked in with the backhoe installed and you can actually mow with it…though it looks funny mowing with the front loader and back hoe…I cannot believe how strong the unit is…loading a 40yard roll off dumpster and breaking down a burned out camper on a property for a family member….it’s unbelievable the straight up utility of these little subcompact tractors
Sounds like a great deal and a sweet machine! I didn’t have a Massey Dealer very close to me so I did t get a quote on one of those. I’ve heard good things though!
@@PeeksPeakHobbyHomestead yeah not to many around here either…but if something major comes up I have a trailer and a truck about an 1-1/2 and I should be able to get it done…but I’m realistically going to be able to repair it myself
i have the 54" deck on a bx2350 and i find it to be a real pain to install and remove. it was probably easier to install and remove the danco C3 60" belly mower from my 1948 farmall cub i used to run. the good news is, that the BX deck seems to be well made (not that my old farmall deck wasnt well made, it was 60+ years old when i sold it, and the deck wasnt bad).
We sell Kubota tractors where I work and have seen a few busted fans, but mostly when running without a deck. All it takes is one stick and it's broke!
I hate the placement of the battery on my BX2660. You can easily short it to the tractor when trying to pull it out far enough to remove the negative cable. Had a almost dead battery blow up because of that. The battery compartment needs more room and needs a good plastic insulator on the top side.
If you think that BX23s is hard to swap the mower deck on/off, you haven`t tried it on a John Deere 420. With the JD420 & 430, you have to jack the front of the tractor up real high to get the deck out from under it. And the JD deck is alot heavier than a BX deck. We still use the JD420 for mowing to this day, so the deck stays on it. Our BX23s is a far easier tractor to take the deck on/off/on. Use your frontend loader. Pick tractor up, roll deck under.
Hated my deck so much, I sold it and bought a zero turn. Rear wheel extensions are a must. Can't stop leaks on front axial. To be honest, can't wait till the day I replace this BX tinker toy with a real tractor!
I expected, "It's not a Massey" eight times in a row. LOL! Great video! I know you love it, but it is good to voice the things that are frustrating and let the engineers "improve" some designs. I think the BX is still up there with a 1025R in sales and positive reviews. I don't think anyone else sells nearly as many sub compacts.
Great video! I own the 2020 BX23S and I agree with you on all points Installed led light bars on front and rear of ROPS to deal with the light issue Like your tip for dealing with the mowing deck. Specs from Kubota say it weighs about 250 and it’s a beast to deal with on your own. Hookup is a real pain but something that helps a little with the mid pto collar is you can pull that latch back and it will actually lock in the open position so you can get a little feedback once you slide the shaft back on properly-that click back into place helps. Im going to modify a 2 wheel dolly or appliance dolly to become my deck dolly for when i get it slid out from under the machine so you can move it around easier Mounted a toolbox on the ROPS using the 2 bolt holes on either side of the ROPS
Great video and you nailed it! The only issue I haven't had so far is the belly mower issue because I don't have the mower. I also agree its a great little tractor and should have bought one sooner!
I have drive over deck on B but never have driven over it or plan too. To me the weight looks like bad idea driving over pulley guards. Congrats on 2K subs
Great video! I’ve had my BX2380 for a little over a year and have about 80 hours on it. My only real complaint is why did they make the brake pedal so tall?
My dad has a lx2610 backhoe stabilizers and the arm itself sags it looses pressure in the cylinder otherwise it is the best. No issues with tires no nothing like that. He has a 60" snowblower it works flawlessly.
Every owner has a love/hate relationship with their brand of tractor; it's just a fact of life. I have a Mahindra XL28 mid-compact and the damn seat is tilted slightly forward when locked, which constantly forces me to push back into the seat. Also doesn't have a cup holder, which is just bizarre. It does come with an exstenda-hoe, but they call it reverse! Agree that nothing gets done on property w/o a tractor. Neighbors who buy property w/o owning a tractor are called pest, but I help them anyway. Good video.
We used to get flats all the time. Added a bag of tireject divided between the four tires and we have not had a flat. I'm constantly running over blackberries and locust, no issues. Haven't even had to add air since ~2019. I'm not a tireject evangelist, use whatever you use, but if you don't have a favorite I have had success with tireject and these tires.
BKT Skid Power HD 18x8.5-10 skid steer tires. The gardenmaster R4s are severely underrated for loader work. The 8 ply BKTs are literally twice as thick as the gardenmasters which results in twice the load rating. You'll likely need a specialty tire shop to mount them as the small rim and thick tire isn't something a typical tire machine can handle. I got mine on sale for around $80 each.
@@timm1065 I had a tire that wouldn't hold pressure at the bead. Same shop that mounted the tire remounted it with bead adhesive and it's been fine ever since. Lower the tire pressure while mowing for a softer ride?
we had tried that. just seem the skid steer tire had a different bead profile and it didnt want to seal on the wheel. That and the 10ply side wall made it not want to really conform unless it was at Godly high PSI, and the ride was TERRIBLE at 40psi.... Just went back to factory tires and filled with slime until something else pops up for fronts.
I love my kubota bx 23s. I use the hell out of the back hoe, especially with the root ripper attachment. My only complaint is the loader lift capacity.
Lower deck problem . Simply sell the lower belly deck and by a scag zero turn, you will not regret it. Other than that the BX24 is a reliable tractor, mine is a 2006 and only have had to replace a waste gate valve, Deka battery and a few front tires due to my own fault.
Agree with the front tires, no tool box, and most of all difficulty of removing the mower deck. That on its own is a big pain. Now add to that the mower deck raises and lowers with the 3pt hitch. Unless there is something I don’t know, leaving the mower deck on when you use a box blade over some really deep ruts and tough ground doesn’t seem doable. It will tear it up. So time to sing the hernia song again. Now, the worst part is that the first fuel filter is waaay under the tractor and not possible to change with the deck in place. Like another commenter said, This is a terrible location. Just horrible. Before I learned that I have to use fuel stabilizer religiously in my humid area, I had to pull the mower deck twice just to change it. Water in the fuel blocks the filter off instantly. I recently saw a third party company makes a fuel filter relocation kit. Haven’t tried it yet, but will the next time I have to change it. All in all, though, the BX23S is one of the best purchases I have made.
I am at 460 hours and actually have only changed my fuel filter once because the first time was such a pain. However, I have new ones and am about to tackle it again. You may see a video of me complaining! Lol
You can use the cutting adjustment knob to keep the deck from lowering. You just have to adjust it to "top" when it is all the way up. It will keep the deck tucked up to the tractor. When ready to mow again just reset to your normal setting.
When I had my BX2380 I could have made the same video, excellent group of gripes. Now with the LX it's actually lower than the BX even with the big tire option. Im not sure what they were thinking with that ROPS. Stay well! Mark from the Cay. 🌴👍🍻
1. Thanks for the video. 2. you can get a long metal rod with a handle on it like we did moving 6 stack of milk crates pull out and out to other side to put in. 3. maybe runs fog lights for head lights. on your garage hand pink construction as a reminder. 3. A so u do NOT HIT your garage door 👀👀👀👀 4. maybe they can make a small 6 inch by 12 inch or the side of the hood or like the plastic box that go under your bed they come in different colors. have magnets to on in place with motel clipsssss. did you have a maintenance clip board in your garage for oil and other things to do. when I build my house going to put a blueprint in the house of all the things I do so when I sell the next person know I put electric in the front yard for gate and the cool things.....
I’ve got a 2023 model.. got 20 hrs on it. My biggest issue is you can’t drive forward when I’m using the backhoe. It’s a pain to get off turn the seat and move up 4’. Any idea of where to disable the safety switch??
I got sick of the sidewall on our tires. We got the 2660 Kabota 2010 and the sidewall on the tractor are always getting messed up or is just mess up the yards or just makes it muddy. The tires are always tearing up our properties. I don’t know I feel like Kabota can make better tires or maybe that I don’t know of but I think they can make better tires on the Kabota. that’s one thing I do not.like and the ties are very expensive when you do have to pay for new ones or they just get slick and the tractor just starts sliding especially if it’s snowing
Tool box or tool tube hung on underside of the top of the ROL If 85-95% of the use is mowing, would the deck be an issue? Would like to get one with the loader.
First, I also hate the tiny front tires, but I never cut the sidewall, my problem is that when you really fill the loader, the tires can dig into dirt then create a slow leak because of dirt went between tire and rim, I don't use the mower, in fact I sold it, but you could change the split rings with pins plus you could also lift your front end with the bucket, makes it easier, as for the toolbox, I installed it on the ROPS, I agree the 3 points is a pain, but I do it twice a year, to put on and remove the snowblower, all the TLB have very high ROPS, imagine all the times you would forget they were lower and hit your head...lolll, and all tractors even pickups with a bucket or a blade have the same issue, I installed led bars on the ROPS for the front and also for the rear, as for the undercarriage all tractors are made a bit weak there, they should improve, what really bugs me is the front capacity, I would like to have an option of bigger cylinders, to lift more, I understand they would be slower, but that is one trade off I would be ok to live with!
ROPS answer.... use the KISS technique (keep it simple stupid) .... just like the string that hands down for the quick release for your garage door, you simply need to hang a pool noodle (Styrofoam) horizontally from 2 pieces of string about 48 inches apart attached to the 2nd from bottom garage panel to create a warning sign to recheck your ROPS are folded down. I have the same issue only on the way in, obviously. As soon as I get out, I put them up and they stay up all day. But I forget coming back into the garage. Just make the string long enough so you can see it, but not too long that it will be an issue for your car. The pool noodle should be safe so you won't get close lined as you pull in. You just move it up over your head or go slow and let it move itself up and over your head. Use an orange noodle if you can find one.... lol. As far as the Mower deck, I'm still working on fabricating a pair of auto movers that probably will make moving it easier.
Great idea as a reminder - maybe just take it on the bottom of the door (inside & out). DollarTree had noodles on an outside rack couple weeks ago. *clotheslined
Bout the only one I agree with is the last one you said. I also wish I had git mine earlier. I have had mine, for 5 years. Had zero problems out of it, and I ask alot from it. I feel guilty complaining about the little thing, but goid video 😊
Great video. 100% on point....with everything! How are those R14's holding up for you? I have blown out the wall on 2x now on the factory style tire; I must be turning too tight to the left, especially with the bucket loaded. :(
I hate the quick disconnect of the bucket Hydraulic lines. It cracks and leaks. Have had to have mine replaced 3 times in 2 years so far and I have a 2019 BX18. Other then that love the tractor.
Lots of folks have that issue. I had mine replaced and it hasn’t leaked any more. I’m very meticulous now about turning the machine off and relieving the pressure before disconnect/reconnect. I hope it holds up because when it works right, I love it.
On the Kubota 3350 what causes the main hydraulic ram housing to explode,,,, twice ... Right after being changed, the new one exploded in the Same place ?? Comments appreciated 👍...
Its a MOWER. Unless you need a micro tractor, it's a mower. I have owned my BX for 23 years and its the best engine in the business, and the frame is tough. The mower deck is ok, nothing special. With the Limited slip diff engaged; it will climb a brick wall coated with algae. A GREAT MOWER that can do some other things, but it's a mower.
I needed a micro tractor. I've got both a BX23S and a M100GX. 4 out of 5 jobs on my 20 acres are done by the BX. I can get it into places that I just can't or don't want to get the big tractor. The 4in1 bucket was an exponential boost to its versatility.
Before you buy the R14 tires please check out Good Works Tractor's video on the Kubota BX tractor and the 60" belly mower. He found having the R14 tires with the 60" deck you can't turn as tight as you want because the tires catch the deck so you have to back off the steering to keep the tire clear. John Deere's auto-connect mower deck is by far the best on the market.
I appreciate the heads up. I’m not sure what brand of tire Good Works was referring to, but I put a set of Goodyear R14s on mine with a 60” deck and have no issues turn full lock either direction. 🤷🏼♂️. Probably a difference in brands or something.
I would love to change out the split rings on the mower and the 3 point. Where can one find linch pins small enough and strong enough to do the job? The smallest I have been able to find are 1/4". My wife's gator wagon has smaller pins than 1/4" and they do not fit. Thanks!!!
They have 3/16” on Amazon. I went to tractor supply and bought several small sizes to figure out which ones I needed. I can’t remember the size but they had them in stock.
Forgot that damn fuel filter under the tractor. I relocated it first time I changed it. Switch the deck wheels to pins makes it a little easier then those circle things. I also lift the tractor with the loader so the deck can slide under the front wheels. Helps a little.
Great analysis, thank you. I have a John deere Z930M and looking to buy a ZeroTurn EV with a 54 In Deck. What is your take on the best Brand and Technology in the market. Your assistance is greatly appreciated indeed. Ivan
There are no better solution than buying a dedicated backhoe. Doing and undoing the Backhoe will wear you out. My problem is that it doesn't have enough power to tille. I need 30HP for tilling. The B01 is too high off the ground for my hilly property. I need a low to the ground 30-35 hp tractor with a mower. Can you think of one?
That’s interesting, must be soil types. I run a 5ft tiller with my BX and it does fine. I couldn’t recommend a tractor for you, I honestly don’t have a lot of experience with tractors. Just the BX.
So right on with number 8!! I tell people all the time “this thing is so handy, if I could get it in my bathroom, I’d wipe my ass with it”! Love the BX!!
Just rig up a small whinch on floor to pull deck out from under tractor. Probably get everything at harbor freight for under $100 or a come along. Anchor a chain or bracket to concrete to attach the whinch
That’s a good idea. I actually have now learned how to position the mower so that I can lift the front wheels of the tractor with the bucket and just roll it right under. Works great!
I mow a couple acres. I needed the BX to maintain the other 36 acres, but using it as a lawn mower was part of my justification for pulling the trigger. There might be more cost effective ways, but in the end I just really wanted one.
I wish the headlights were also very bright even the flashers when we are on properties some of the roads are very very busy and sometimes we need our flashers on. Sometimes the flashers are on hours and hours and they’re not also very bright some people don’t see us until they get up on us and yes, that top bar we’ve almost flipped a tractor with it trying to get in low areas. I wish they made that like all you had to do was like make it easier to push it down or something I just feel like the headlight thing, though they could be very brighter or they could be LEDsto make people know you’re there or sometimes when our tractor sit on the side of the road there’s a lot of people that almost hit it or just get extremely close to it cause they don’t see it I don’t know
I got sick of sliding my mower deck in and out too. Now I only use my loader to install and remove it. Drive up to your mower deck until the front tires touch it then point the bucket down in almost full dump position and lift the front up until the tires will clear the deck. Roll it back, lower back down and install as normal. To remove, unhook all linkages, lift front end with loader, roll deck forward and resume the rest of your day.
This is the greatest thing I’ve read all day! So simple! I can’t believe I never thought of this.
Thanks for watching and comment by the way. I got distracted by excitement.
@@PeeksPeakHobbyHomestead I saw someone else on UA-cam do it and have done it that way since. I can’t find that video now or I’d give them credit. Give it a shot and post up your own video on it.
I think I will. 👊
I will try that the next time I need to remove it, thanks a lot.
I have the BX25. My front tires went bad so when I replaced them, I had them foam filled. I have never had another problem with the tires going flat.
Put lights on on the tall ROPS. Works great!
Mid-Mount PTO shaft: Add/Remove when "cold" as possible and I have found to just "push it on there" BEFORE I "pull the collar back". Once it's "on there" and "started", can pull the collar back and click it on much easier.
You forgot to add the woefully small radiator that constantly overheats when a bit of grass gets in the there or it is a moderately hot day
I keep the screen cleaned off regularly while mowing and bush hogging, but I’ve never had a problem with mine overheating.
I agree with all your complaints about the BX 1880. I cut my roll bar down. Yes i understand that it will be addressed on the day I sell it. I added 2 off road lights on the front and the back and at my feet. I cut grass after sundown because it’s cooler temperature. But that pesky mower deck. Boy oh boy. I drive the front wheels on 4” blocks and lift the back wheels to ease the pain of hooking up that drive shaft. Enjoying your videos. I live in Newfoundland 🇨🇦
Just ran across your video and I'd lie to share some of the things I've done with mine. First I bought it in late 2016. It's a 25D. I'll address each issue as I see it. Never had an issue with cutting front tires. I have had an issue with them coming off the rim because I failed to diligently keep an eye on the pressure. They are such low profile I never realize they were low until they are rolling off the rim. I've ruined 2 tires so far but hopefully have learned my lesson by now. I agree with the mid deck. it is a pain in the ass however much I've read about the drive on, they are a hit and miss too. My solution was to replace my small zero turn mower with a 60" commercial grade zero turn. They are way better and faster at mowing. I sold my mid deck which solved that problem. As far as the backhoe, I've dug up a few trenches and at least 40 tree stumps. I love it. I made a roll around carriage for it so when I unload it, I can roll it in the corner out of the way. Also makes it easy to hook back up when you can move it around easily. To address the rops height, after running into a few things, I bought one of those skinny fiberglass mast they sell for bicycles with the little flag on top. I mounted it on the floor right against the left loader bracket and cut it 1" taller than the rops. It is now in front of me and it will hit/scrape anything not tall enough for the rops. It has saved me several times. I dont switch between the 3pt and backhoe as much as you so I really dont have much issue with the 3 pt. As a matter of fact I made a bracket for the 3 pt which as a 250lb weight, 2 holders for a shovel and rake, a good size tool box mounted on the top, and a power inverter mounted on the tool box. These days that pretty much is on 75% of the time. I dont think I've ever used mine at night so I can't comment on the lighting. Lastly since I dont have a mid mower I installed one of those skid plates from BXPanded. A very nice piece. Easy to take on and off if you still want to use the mid mower. To bad I can upload a few pictures. Might give you a better idea. Like you said, despite all the little drawbacks, it is a work horse and I'll go before it does.
I have a bx 2230 and my two best mods - made a skid plate for underneath and added 2" wheel extenders on rear wheels. Have hilly land and a lot of under brush. Great improvements.
I’ve been thinking about getting spacers myself. I am on a lot of hills. I figure it couldn’t hurt.
@@PeeksPeakHobbyHomestead
*First, THANK YOU for this great video! We finally had enough of the nonsense, and moved in to an extremely rural home (as in 2 months ago). We **_definitely_** made the right decision, but the learning curve is much higher than I expected - the tractor has ben the most difficult. Our place came with a 1994 AGCO-Allis, which I have been able to figure out is closest to the Kubota series of garden tractors, so I'm looking at every video I can find to learn what I can. If the thing hadn't come with the extreme low use (less than 900 hours), and in such amazing condition (except for the seat, it looks nearly new), I would likely have sold it and shopped for a more modern machine, but saving all of that money is really important right now (between the purchase and the move of several hundred miles), so I've decided that learning about this machine and keeping it is a better plan than buying a newer (or actually new) model and dumping more of that scarce cash; your video was a **_really_** good overview of this device, and I am **_genuinely_** grateful for you posting it!*
*If you take "requests", I'm looking for a good operating tutorial, as the transmission is making me crazy in short order :-/ I've got more than a million miles as a car driver, but the experience is so **_completely_** different on a tractor, that I am a little scared of it every time I turn it on. We bought a place with a little over an acre of very hilly back yard, so driving over it on a machine I'm uncomfortable with can be a draining experience - your overview helped a LOT more than you probably think, so I am grateful for the great video! I'm subbed, and will start working my way through your "catalog" today!*
Use lynch pins in the anti scalp wheel shafts then you can turn them easier. Also lift the tractor with the bucket and outriggers just a bit and the MMM slips right out or in. And it makes it easier to hook up the mid PTO because you have more room. I don't have trouble with the MMM and I'm a month shy of 70 yrs old. I also use a 2 X4 to push it out so I don't have to get out of my wheelchair.
That is a good idea! I will have to try out those tips. Thanks for commenting!
Yup, deck removal and install is a pain. I do turn the casters because I'm 70 with Arthritis. I also have to remove a back tire to connect the shaft. I only do it twice a year so I can live with it. And I'm glad I have it.
To remember to lower the Rops, I have a roll of ‘bird tape’ shiny red/silver streamer to tie in trees to scare birds away. I cut long streamers and tape the ends on inside of my garage door, when I open the garage door the tape hangs down and blows in the wind, giving me a warning to stop and let the Rops down. When garage door is down, the streamers are not in the way. Works great and only $2.00.
Good idea
I’m always impressed by what the BX is capable of they are made to work. You are spot on with #8!
Right on! I use mine for everything! Hope all is well in your area of East KY! We are a couple hours from the flooding, but lots of folks are having a tough time! 👊
@@PeeksPeakHobbyHomestead we are good in my area, I’m 40 min from the heaviest flooding. It’s crazy at how fast it came lots of folks lost everything. Thanks for checking buddy! I enjoy seeing a fellow Kentuckian put out great content!
Easiest way to put the mower deck on is to raise your tractor up high in the air with the bucket and the backhoe out riggers
I'm right there with you. I got the Bxpanded tool box that mounts on the right side of the ROPS facing forward and it's been a great addition for some small tools, tape measure, gloves, safety glasses, Sun screen etc. Man, #8... you are right on point. I absolutely love my 23S. Approaching the 50 hrs mark and she's been doing great on my 1 acre property.
I almost went with the ROPS mount for the toolbox, but I’ve got a couple of really tight trails I barely fit through. I decided against it…. Thanks for watching!
That's awesome to see, I was wondering if I was being really dumb considering getting one of these for my 1 acre property.
Picked up an 855 jd for my 3 point needs taller bigger tire wider front bucket don't have to take the backhoe off the bx
Until recently I owned two BXs (long story), I now own a BX and ZD1211 ZTR. Mods were rear wheel spacers, weights or filled rear tires, Bro-Tec belly pans, swapped OEM stabilizers for adjustable slides, tail light and hazard light protectors from Paul Short, modified rear wheel lock pad from Paul Short and rear hitch. The JD1025R I bought thinking it was the bees knees now lives at one of our sons house.
Mid mount mower installation issue: I use a tow strap to install and remove the deck. The hooks on my strap do not have safety latches. The inner diameter of the hook closely matches the od of the metal rod of the scalping wheels. Once everything is disconnected, I put the hooks on, step into the loop (facing the tractor) and lay it across my lower back/hips. I then walk/push backwards dragging it out and use my hands to direct where I’m applying the pull while working the deck around the wheels. To reinstall it I pull the tractor beside the deck and throw the hooks under the tractor and drag it back through from the side of the tractor opposite the deck. I do this on gravel and it still works. You of course still have to make the final adjustments on your knees or bent over but at least most of the dragging can be done standing upright. I hope this helps. Thanks for the video.
That is a pretty good solution. I’ve since learned how to reach over the deck with the FEL and raise the front tires up in the air so I can roll the deck straight back. This has become my new method of installation. Takes a little practice. Overall it works well.
2020 BX23S owner. I am not using mine with the same hours as you, but. . . I have the ride over mover deck, and the only thing easy is in the name. If you dont have it on flat, level, concrete you will have problems. Most of the time i need a second person to hold it from getting pushed forward when i try to drive over it. I have also found out it is mostly a finishing deck, so not great for field cutting. So i have overheating issues that extend the amount of time it takes to cut the grass.
Popped a wheelie once bringing it back and forgetting the bar was up.
Moving the seat to use the back hoe is a pain.
The tractor is a beast though. Grading, fertilizing, snow removal, and a bunch of stuff i havent done yet, but will in the future, super happy with it.
I love my BX23S but I am with you on all of your complaints. The belly skid plate to protect the fan and light bars on the ROPS and other mods that many BX owners do to their tractors should be standard equipment in my opinion. In addition to those, my front end loader is SUPER sensitive when lowering it while it is loaded. There may be a way to fix that but I haven't done it yet. Great video!
Yes the loader is very sensitive. It is tough to lower anything slow and in control…
I have a BX24D. I am 76, and yes, pulling the deck out each year is a pain, but I still manage it. Not going to pay for a "roll over" model! I love my BX, and it does great mowing, I have hilly ground, and locking the 4 wheel it will climb a mountain! Good video, but some of your complaints were things of your own doing. I removed the top of my ROPS, might be dumb, but I got tired of running into tree branches. Don't need to carry a bunch of tools, only have 6 acres to care for. Be careful of where you drive, and don't wreck your tires, or fan. I have had my BX since 2005.
Now for the complaints. I have a major problem with sputtering and stalling, even though I have drained and flushed the fuel tank, replaced both fuel filters, fuel pump, and solenoid
. 950 hours, and I think the next step will be to replace the injectors. Don't have any more answers. Fuel is clean, run it in my wife's GR2100 diesel, and she has no problems.
Only other complaint is a lack of qualified Kubota mechanics available here in the mid west.
Yeah, this honestly isn’t a real complaint video anyway. Just a way to get people’s attention and share some of the “issues” I’ve had. Hoping it helps people know what to look out for. Thanks for watching and commenting!
@@PeeksPeakHobbyHomestead I Have the BX 25D and I had the same problem as you have or had. I guess I took my BX apart 4 to 5 times before I found the problem. There was a rubber gasket inside the fuel tank which in time it worked loose and started blocking the Fuels outlet hole. I Hope you have found your problem by now. The only thing I don't like about my BX 25D Is in order to change the fuel filter under the tractor the mowing deck Has to be removed.
Headlight issue is an easy fix. I put a full width LED lightbar on my ROP`s. I added a LED work light to the rear. All these things are easy things to add to your BX23s.
Absolutely agree.
Great video. Thanks for taking the time. I love my BX23-s as well. I have the drive over deck and I don't think it is any easier. My biggest complaint would be how difficult it is to swing the seat around to use the hoe. The seat barely clears the rops and if you are clearing a bunch of brush stumps really adds time to the job. On smaller digs I don't even swing it around but reach over the back of the seat.
Thanks for watching and commenting!
Same!!! its dug into the plastic on the lever panel and cut a huge hole in mine....
Note: I found the source of my difficulty this past weekend. I have owned this tractor for nearly 3 years and just discovered the seat reclines. I raised the backrest up straight and now the seat swivels around much easier. Operator error I guess.
@@blacklab1059 yeah, i usually fold mine flat... if you didnt know that, you might not know there is a lever in the front that allows the WHOLE seat to lift up and fold forward.... This is a lifesaver if it has to sit out overnight or gets rained on, as the seat will stay dry.
@Tim M I discovered that at the same time!!! I can see where that would come in handy. Problem is, I don't know what I don't know. You think I would be better. I was raised on a farm. It is probably because the machine is so new. After all, I have only put 170 hours on it. 😉
Over 270 hours 1 year old mid PTO is the only thing i hate doing and the tip for the pins just made my life a whole lot better TYVM.
Thanks for watching!
What you do to make it easier is put your tractor up in the air with your bucket then you have plenty of room to work to get that deck off and out. Just thought you’d like to do.
Great video that should help a lot of tractor owners out there. #8 is the truth! 👍
Really trying to have some fun with it. Overall, you just can’t beat them!
Spot on with all of these, but my #1 is the center of gravity as it sits from the factory. I have had it in too many uncomfortable situations and one where it almost rolled. I have since added spacers which has helped tremendously.
What I did with a toolbox I use a ammo box drill, two holes in the sides of it got me a U-boat clamp and I clipped it to my bar and for the headlight problem I would’ve Amazon bought a LED bar light and placed it at the top on the inside of the bar works great. You could light up the world and it wasn’t very much money that I placed it on and off switch right beside my cupholder just thought you’d like to know
I am with you on Quick Hitch and mower PTO being a pain. And my first question was why dont they at least give us somewhere to put a toolbox? I am trying to figure out how to attach one to the ROPS. I replaced those key rings too with better pins. I would add that its a pain having to raise the mower fully before you can adjust the height limit on it. I went for the full tractor tires for best traction and as long as you dont turn aggressively with the power on full, they dont damage any grass. And I too would buy another in a heart beat..
I agree changing the 3 point hitch to the backhoe is a real PITA. I actually practiced it one day taking it on and off for a few hours and learned how do to it much quicker and easier but still whenever I have to change it I really dread it.
Removing the 3pt and installing the backhoe is a 5 minute job (at least on the BX25D). It takes longer adjusting the 3pt to an implement.
100% agree with you about the headlights. Horrible position. I use a headlamp when working at night and driving the tractor.
I have the drive over mower deck and it is a pain to remove and install. It used little folding ramps which are very frustrating. You also have to remove the deck to grease the pto shaft and idler pully and it is still a pain.
For better lighting I added large LED floods to the outside of the side post of the ROPS. They are mounted on pivots so I can point them forward for loader or mower work; can point them to the back for backhoe work.
Most of these things are workable. I think I'm still going with the Kubota!
Thanks for the honest review! I think you sold me on Kabota. Was looking at the LS but I think Kabota will be a better machine.
I have a BX1500, early early model and have similar complaints. But I have to say, it never fails to start and always gets the job done, over 1100 hours later.
My Dad had a little B series years ago that was such a tough little tractor. That’s a big part of why I went with Kubota.
Loved your video. No long drawn out BS. This is about my '08 BX2350 bought new. I do not have a mower or backhoe, do not need them. Agree with the headlight issue. Poor design, and mine came with no toolbox! Bummer. BIG BIG GRIPE, my hr/tach meter died right after warranty ran out. Replacement cost, $600. Still haven't replaced it. But I really have to agree with your # 10. Man I've gotten a lot of work done with that little thing. Money well spent ! Thanks for the great video. I have subscribed! Thanks. bbs bota, Spokane Wa.
Thanks for watching and commenting! $600 tach/hr meter…that’s rough!
I think you hit on everything I dislike as well. That mmm deck!!!! That driveshaft!!!!! And I am 63 with back problems, it DONT get any easier. I will have to check my fan, I don’t think I have a problem, but I have to look. Ours is a 2016 with 1089 hrs. I have done every 100 hr service myself with Kubota parts. Only ever had 1 real issue, the tach went out at 72 hrs. Replaced under warranty. I’ve replaced 2 front tires, didn’t cut them, but the sidewall bulged , my fault ran over firewood. Replaced Steering knuckle seals also. GREAT TRACTOR!!!!! Thanks for the video. Am going to look into the toolbox problem!!!
You can’t beat ‘em! I appreciate you watching! 👍
Forgot to mention, I’m on the original battery, no trickle charger it is garage kept, and going strong.
Agree with
1. tires. I am fighting a leak on my front right tire now.
3. the 3 Point components are fiddly.
6. Headlights are rough.
8. The backhoe on mine has been a life saver for me!
Great vid Lucas! Have a great week!
Thanks, Derk! You have a great week too!
If your tire is aired down, does the bead retract off the rim? I believe the issue with the front tires leaking air at the bead, the rims are not manufactured to the right dimension to hold the tire bead on the rim.
@@ThisOldMan-ya472 I haven’t actually had this problem, but when I changed mine I used bead sealer on them so I think that probably helped.
That's what happen to mine keep going flat. I even took to tire shop 2 or 3 times. This last time side wall ripped a 1/2 inch hole in bad side wall. I found a shop foam filled dropped off on Friday and picked up Monday. Don't know why keep leaking around bead.
i put slime in my front tires, even brand new they were leaking around the rim... was the only thing i could do to get it to seal up....
Lucas: yes there are some issues with the BX23S. I have solved a few that I dislike but generally I am happy with it. I have had it since March this year and have clocked almost 90 hours. I settled the light issue with LEDS on the ROP front and back. The storage is in an ammo box on the ROP, like every one else. The front tires are not designed for really rough terrain. My local HE tire shop have told me that. They recommend a better sidewall tire, which they can order for me. And YES I should have bought this tractor a few years ago. Take care and stay safe. PS: are the ladies running around in the crops yet?
I need to get on a lighting upgrade! I’ve meant to for a while. I’m an early riser so I don’t keep late hours much so I wouldn’t use them a lot, but it would be nice.
I actually refer to you and the chickens in the video that will be out Saturday morning. 😂 I couldn’t bring myself to do it. Lol.
Talk about a workhorse, I had a BX 2200 for 23 years without a hiccup and with very little maintenance. I traded it in for BX 2680 because of the front end loader easy on easy off feature.
I have about 1400 hours on my BX2660 and know your pain on the mower.... my other pain is the hood/side shields.
I put 110 hours on the loader in the winter darkness the first year I had it (couldn't afford a snow blower yet) and agree about the headlights.
I have a 2005, same as you I bought the floor model in 2006. It's got 500+ hours so far with no major complaints about the functions. The 3pt hitch? I have a backhoe and never take it off, so that's not a problem. the backhoe footwells are also a good place to put tools. The ROPS? Mine might be a little lower because I can get into my garage with a less than 8 foot door. The lights I agree. I usually have the bucket up above the lights so I can see, but then it's right in my line of sight. One complaint I have is they loaded the tires with a sodium solution at the dealer. Within 7-8 years BOTH rear rims rotted out from the inside. Luckily the fronts have both gone flat at times and that solution leaked out long ago. You might get lucky because i hear they don't use that anymore.
Right now it won't start and I think I have a safety switch problem. Which is what brought me here.
Thanks for the comment. First place I always check when it won’t crank is the HST pedal. Make sure it is “home”. Then PTO. Good luck. I hope it is something simple!
@@PeeksPeakHobbyHomestead HST pedal? Forward/reverse pedal? I wasn't thinking I had one there. I was thinking it was the switch on the high/low/neutral lever. I have had to jiggle that lever to get it to start before. Started fine yesterday, but today I get nothing. Even jiggling it around the neutral position. That's what brought me to your video. I was looking for a video that showed where it is.
@@americantaxpayer4551 I have a video coming out in a couple weeks on the Fwd/Reverse pedal. Mine has one there. I figure yours does too…
Dude you got 400 hours of seat time. You know your Tractor. I do this for a living. I’m about to get my 4th Tractor. That’s how I ended up on your site. We need everyone’s feedback to keep all of us running. All legitimate complaints. All that would bug me too. I bought a 33 hp Tractor, wanted more muscle so I got a Deere 50 hp and found it way too big for my clients. Then purchased a 40 HP Tractor. It’s very nice but I’m thinking about another one. Maybe TLB on a medium Frame. Thanks for the good information.
I appreciate the comment! Thanks for watching. 👍
Thx for the video
I just bought a 2022 Bx 2380 with a LA 344s loader and I need help and resources!
You are now one!
Thx
H
From the Great White North
Welcome to the channel! I have a Kubota BX playlist where I try to keep the BX content. We do all kinds of stuff here. Glad you found us! 👍
agree with the mower deck being a pain to remove and put back on
also the head lights are at the exact wrong place.
i BOUGHT MINE IN MARCH OF '20. iT IS A '10 MODEL. Got a lot more hrs on mine. Like 1200 and today i am changing the Trans fluid for 3rd time. I dont have a lift but i run it up on a plank on my drive held up by 4 cement blocks and then I can get under it with ease. My drive has a slop to it. Where they put the filter is just nuts. It is hard to get at.
Next is the seat. All it will do is turn around. There is no adjustment to it anywhere. I'm just 5'6" tall with a 29" inseam. The seat is set for someone well over my height. Like someone over 6' with at least a 35" inseam. This means that they built this thing so that less then 29% of pop will be comfortable riding it. I have to sit well forward on the seat to reach the paddles. This makes it very tiring to run.
Then there is the drive saft for the front wheels. It is open to the air and will bet stuff tangled up around it. I did this the first month I had it. It did in the front seal on that drive shaft. I had to get a new one and put it on. Big hassle. It should be in a protective shield so this will not happen.
Then there are the 2 pins that hold the backhoe on. They are very hard to get ot work. I have to beat on them to get them to work. Then there is putting it back on. Takes forever to get it lined up so u can do this.
Last is that little filter screen u have to take out of the back. Real hard to get out. They need to put a pull something on it so that it will come out with ease.
Dont have the lawn mower b/c I collect grass and compost it for garden. I looked into buy one but they wanted 1/4 of what i paid for Tracker and I cant even move such a thing around at 76. I have a Husqvarna 42' to mow my 3 ac lawn. Even they dont make a good bagger for it. I had to get an aftermarket one what was built a lot strong after just 2 seasons. So u see even top names blow it a lot when they try to make things as cheap as they can I would be will to pay a lot more for something well made rather then the shit they make today.
Btw I am a Hay farmer with beef on the side. Make most of my money selling hay to an organic dairy farm in S CA. I own 6 other trackers. All build before 1990. I bought the little BX b/c I need its backhoe. Ya I do a lot of work with the little one but I would really like it if they would come out with a new seat that will move forwards and back.
I live where water, to much not to little) is problem. Got the Bx to dig drains on new land. Old land has them already Paid someone to dig them. Got tired of paying out more then the Bx cost every yr to do this. have saved over 40G's already with it.
I have a Bx2200 that I bought used with my home. I love that little tractor. I put the ag tires on it because the turf ones it came with kept getting me stuck. As far as tool boxes go I mounted a cheap metal Harbor Freight one on the left side of the tractor where the ROPS goes. I removed my ROPS because it was an issue. One was when I first got the tractor I did a wheelie and slammed back down when my ROPS caught a large branch. I am surprised nothing broke. All in all it packs a lot of power in that little package and it would take something really nice for me to trade it away.
Awesome, glad to hear your getting great service out of yours too!
JAKE: Would strongly suggest putting the ROPS back on - I hit a branch yesterday too, but the time rolled over it was comforting to know I was covered. Perhaps cut it down a foot and reattach.
@@terrib6028As respectfully as I can put this, no.
Removing your Rops is probably the biggest risk you can take, you can’t cut it down as it is engineered to specification for your machine.
If you hit a tree branch you can hardly blame the machine, that’s operator error. I don’t need to tell you what the consequences are if you roll the machine and Rops uninstalled. Add no seat belt and you probably won’t get to read this comment, ever.
@@bigdaddydoggy4842 Really the biggest risk? LOL. Well 10 years later no problems with the rops bar unbolted on the floor of the garage. I guess I should install rops on my antique tractors too so the arm chair safety officers can feel better?
I baught my bx1880 with the Curtis deluxe cab in march of 2019, I’ve got 915 hours on it so far and love it!
Oooo, a cab! Nice! Man, I thought I used mine a lot! You are getting the good out of yours for sure!
Hey there, great video. My absolute biggest pet peeve with mine is forgetting the brake on. O constantly forget to take off the brake and wish there was something to let me know the brake is on. Cheers.
I’ve heard other folks complain about that. I might suggest to make sure your parking brake is properly adjusted. Mine even when set on the first click will pull the motor down if I try to take off with the brake on. Maybe that will help you out. Thanks for watching and commenting!
@@PeeksPeakHobbyHomestead make sense. Thx I’ll try that . I hardly notice mines on.
Adjustment is simple and I have a video on how to do it if you need a reference. Best of luck!
you need to set it harder, I've ran around with it on, then adjusted it and I make sure it's set hard when I use it so I don't wear it out
Ha! As you are going through the list each one of your issues are the same as on a 2006 BX24. Looks like they did take the time to listen to owners for the last 15 years lol.
There is a decent BXpanded options for an ammo case mount, that attached to the ROPs bar.
The HST fan on the BX24 is not as simple to change, the engine needs to slide forward (Not a big issue) In my case the plastic got brittle, so even with a guard It was pretty much falling apart.
Thanks for the comment! 👊
I’ve got about for about 2 weeks and 18hrs on my massy 1723eb…..I love it,my only gripe is the rear fenders and plastic and the keys didn’t have anything on them to indicate what they are for….but 23,300 for the tractor backhoe with thumb,front loader and 60 inch drive over deck….free shipping to anywhere in the USA from Bruno’s….the iseki 1.1 liter is just crazy good on fuel because it’s setup to run at 2600 rpm for your 540pto speed…it’s sounds like a legit tractor….it came with the three point arms tucked in with the backhoe installed and you can actually mow with it…though it looks funny mowing with the front loader and back hoe…I cannot believe how strong the unit is…loading a 40yard roll off dumpster and breaking down a burned out camper on a property for a family member….it’s unbelievable the straight up utility of these little subcompact tractors
Sounds like a great deal and a sweet machine! I didn’t have a Massey Dealer very close to me so I did t get a quote on one of those. I’ve heard good things though!
@@PeeksPeakHobbyHomestead yeah not to many around here either…but if something major comes up I have a trailer and a truck about an 1-1/2 and I should be able to get it done…but I’m realistically going to be able to repair it myself
Shopped Orange and Green...bought a Red 1725m..great bang for your buck. MM pto is a pain to attach..I'm old😂
I ordered the skid plate for my BX.
I haven’t even gotten the tractor yet.
It hopefully comes tomorrow
I am getting ready to join the club. I think I am going to get the pull behind finish mower for the reasons you discussed. Thanks
You will love the machine! It is one of my favorite purchases! Best of luck!
Get a 54" zero turn instead...you won't regret it
i have the 54" deck on a bx2350 and i find it to be a real pain to install and remove. it was probably easier to install and remove the danco C3 60" belly mower from my 1948 farmall cub i used to run. the good news is, that the BX deck seems to be well made (not that my old farmall deck wasnt well made, it was 60+ years old when i sold it, and the deck wasnt bad).
We sell Kubota tractors where I work and have seen a few busted fans, but mostly when running without a deck. All it takes is one stick and it's broke!
I hate the placement of the battery on my BX2660. You can easily short it to the tractor when trying to pull it out far enough to remove the negative cable. Had a almost dead battery blow up because of that. The battery compartment needs more room and needs a good plastic insulator on the top side.
If you think that BX23s is hard to swap the mower deck on/off, you haven`t tried it on a John Deere 420.
With the JD420 & 430, you have to jack the front of the tractor up real high to get the deck out from under it. And the JD deck is alot heavier than a BX deck.
We still use the JD420 for mowing to this day, so the deck stays on it. Our BX23s is a far easier tractor to take the deck on/off/on. Use your frontend loader. Pick tractor up, roll deck under.
I’ll bet your glad you don’t have to take that one on and off every week.
good review. i am going to get a lightly used bx23s this spring. can't wait.
You’ll love it!
Hated my deck so much, I sold it and bought a zero turn. Rear wheel extensions are a must. Can't stop leaks on front axial. To be honest, can't wait till the day I replace this BX tinker toy with a real tractor!
I love mine too. I just bought my first new front tire because of a sidewall cut.
I expected, "It's not a Massey" eight times in a row. LOL! Great video! I know you love it, but it is good to voice the things that are frustrating and let the engineers "improve" some designs. I think the BX is still up there with a 1025R in sales and positive reviews. I don't think anyone else sells nearly as many sub compacts.
They are hard to beat. My neighbor has the 1025R and they are nice machines too. Thanks for watching, Logan!
Great video! I own the 2020 BX23S and I agree with you on all points
Installed led light bars on front and rear of ROPS to deal with the light issue
Like your tip for dealing with the mowing deck. Specs from Kubota say it weighs about 250 and it’s a beast to deal with on your own. Hookup is a real pain but something that helps a little with the mid pto collar is you can pull that latch back and it will actually lock in the open position so you can get a little feedback once you slide the shaft back on properly-that click back into place helps. Im going to modify a 2 wheel dolly or appliance dolly to become my deck dolly for when i get it slid out from under the machine so you can move it around easier
Mounted a toolbox on the ROPS using the 2 bolt holes on either side of the ROPS
Thanks for watching! I was not aware that the PTO collar locks back. That’s a great tip. Thank you!
Great video and you nailed it! The only issue I haven't had so far is the belly mower issue because I don't have the mower. I also agree its a great little tractor and should have bought one sooner!
Thanks for watching!
It’s a loader backhoe combination. The fact that you can fit 3pl and the mower deck just adds to the versatility.
Absolutely!
I have drive over deck on B but never have driven over it or plan too. To me the weight looks like bad idea driving over pulley guards.
Congrats on 2K subs
Hey thanks! I appreciate the support!
Great video! I’ve had my BX2380 for a little over a year and have about 80 hours on it. My only real complaint is why did they make the brake pedal so tall?
Lol. It is pretty tall!
Cut it down lower and reweld the foot pad back on. Pretty simple fix.
My dad has a lx2610 backhoe stabilizers and the arm itself sags it looses pressure in the cylinder otherwise it is the best. No issues with tires no nothing like that. He has a 60" snowblower it works flawlessly.
Hi, I have a 2006 BX 24 and I have the same issue with the industrial tires. On the front rims.
Every owner has a love/hate relationship with their brand of tractor; it's just a fact of life. I have a Mahindra XL28 mid-compact and the damn seat is tilted slightly forward when locked, which constantly forces me to push back into the seat. Also doesn't have a cup holder, which is just bizarre. It does come with an exstenda-hoe, but they call it reverse! Agree that nothing gets done on property w/o a tractor. Neighbors who buy property w/o owning a tractor are called pest, but I help them anyway. Good video.
Thanks, I appreciate the comment!
We used to get flats all the time. Added a bag of tireject divided between the four tires and we have not had a flat. I'm constantly running over blackberries and locust, no issues. Haven't even had to add air since ~2019. I'm not a tireject evangelist, use whatever you use, but if you don't have a favorite I have had success with tireject and these tires.
I will look that up. I’ve actually never heard of that brand.
@@PeeksPeakHobbyHomestead ua-cam.com/video/X9-Sq0_Iokw/v-deo.html my dad got it after I showed him this lol
Love the ending! Thanks for the review.
BKT Skid Power HD 18x8.5-10 skid steer tires. The gardenmaster R4s are severely underrated for loader work. The 8 ply BKTs are literally twice as thick as the gardenmasters which results in twice the load rating. You'll likely need a specialty tire shop to mount them as the small rim and thick tire isn't something a typical tire machine can handle. I got mine on sale for around $80 each.
Thanks for the tip! I had not heard of those. I’ll be looking into them.
couldnt get mine to seal on the rim, and the ride was ROUGH!!! any tips for that?? My liver is damaged enough from hydrating while mowing...
@@timm1065 I had a tire that wouldn't hold pressure at the bead. Same shop that mounted the tire remounted it with bead adhesive and it's been fine ever since. Lower the tire pressure while mowing for a softer ride?
we had tried that. just seem the skid steer tire had a different bead profile and it didnt want to seal on the wheel. That and the 10ply side wall made it not want to really conform unless it was at Godly high PSI, and the ride was TERRIBLE at 40psi.... Just went back to factory tires and filled with slime until something else pops up for fronts.
I love my kubota bx 23s. I use the hell out of the back hoe, especially with the root ripper attachment. My only complaint is the loader lift capacity.
Lower deck problem . Simply sell the lower belly deck and by a scag zero turn, you will not regret it. Other than that the BX24 is a reliable tractor, mine is a 2006 and only have had to replace a waste gate valve, Deka battery and a few front tires due to my own fault.
Agree with the front tires, no tool box, and most of all difficulty of removing the mower deck. That on its own is a big pain. Now add to that the mower deck raises and lowers with the 3pt hitch. Unless there is something I don’t know, leaving the mower deck on when you use a box blade over some really deep ruts and tough ground doesn’t seem doable. It will tear it up. So time to sing the hernia song again. Now, the worst part is that the first fuel filter is waaay under the tractor and not possible to change with the deck in place. Like another commenter said, This is a terrible location. Just horrible. Before I learned that I have to use fuel stabilizer religiously in my humid area, I had to pull the mower deck twice just to change it. Water in the fuel blocks the filter off instantly. I recently saw a third party company makes a fuel filter relocation kit. Haven’t tried it yet, but will the next time I have to change it. All in all, though, the BX23S is one of the best purchases I have made.
I am at 460 hours and actually have only changed my fuel filter once because the first time was such a pain. However, I have new ones and am about to tackle it again. You may see a video of me complaining! Lol
You can use the cutting adjustment knob to keep the deck from lowering. You just have to adjust it to "top" when it is all the way up. It will keep the deck tucked up to the tractor. When ready to mow again just reset to your normal setting.
When I had my BX2380 I could have made the same video, excellent group of gripes. Now with the LX it's actually lower than the BX even with the big tire option. Im not sure what they were thinking with that ROPS. Stay well! Mark from the Cay. 🌴👍🍻
That’s good to hear about the LX. I may be looking to step up at some point. Thanks for stopping by, Mark!
Simple solution to the headlights problem. Mount them just below the elbow in the ROPS
1. Thanks for the video.
2. you can get a long metal rod with a handle on it like we did moving 6 stack of milk crates pull out and out to other side to put in.
3. maybe runs fog lights for head lights. on your garage hand pink construction as a reminder.
3. A so u do NOT HIT your garage door 👀👀👀👀
4. maybe they can make a small 6 inch by 12 inch or the side of the hood or like the plastic box that go under your bed they come in different colors. have magnets to on in place with motel clipsssss. did you have a maintenance clip board in your garage for oil and other things to do.
when I build my house going to put a blueprint in the house of all the things I do so when I sell the next person know I put electric in the front yard for gate and the cool things.....
I’ve got a 2023 model.. got 20 hrs on it. My biggest issue is you can’t drive forward when I’m using the backhoe. It’s a pain to get off turn the seat and move up 4’.
Any idea of where to disable the safety switch??
Try this: ua-cam.com/video/zTZtF1NGKYg/v-deo.html
I got sick of the sidewall on our tires. We got the 2660 Kabota 2010 and the sidewall on the tractor are always getting messed up or is just mess up the yards or just makes it muddy. The tires are always tearing up our properties. I don’t know I feel like Kabota can make better tires or maybe that I don’t know of but I think they can make better tires on the Kabota. that’s one thing I do not.like and the ties are very expensive when you do have to pay for new ones or they just get slick and the tractor just starts sliding especially if it’s snowing
What a great surprise ending!! Thank you.
Lol. Yeah, I really love the thing!
For the mid-mount mower I didn't get it. Instead I bought a Kubota T2290 ride on mower problem solved. Thanks Mate
Probably not a bad move! I do a lot of swapping back and forth for sure!
Tool box or tool tube hung on underside of the top of the ROL
If 85-95% of the use is mowing, would the deck be an issue? Would like to get one with the loader.
First, I also hate the tiny front tires, but I never cut the sidewall, my problem is that when you really fill the loader, the tires can dig into dirt then create a slow leak because of dirt went between tire and rim, I don't use the mower, in fact I sold it, but you could change the split rings with pins plus you could also lift your front end with the bucket, makes it easier, as for the toolbox, I installed it on the ROPS, I agree the 3 points is a pain, but I do it twice a year, to put on and remove the snowblower, all the TLB have very high ROPS, imagine all the times you would forget they were lower and hit your head...lolll, and all tractors even pickups with a bucket or a blade have the same issue, I installed led bars on the ROPS for the front and also for the rear, as for the undercarriage all tractors are made a bit weak there, they should improve, what really bugs me is the front capacity, I would like to have an option of bigger cylinders, to lift more, I understand they would be slower, but that is one trade off I would be ok to live with!
I enjoyed your rundown and appreciate the tips. Thanks for watching and commenting!
ROPS answer.... use the KISS technique (keep it simple stupid) .... just like the string that hands down for the quick release for your garage door, you simply need to hang a pool noodle (Styrofoam) horizontally from 2 pieces of string about 48 inches apart attached to the 2nd from bottom garage panel to create a warning sign to recheck your ROPS are folded down. I have the same issue only on the way in, obviously. As soon as I get out, I put them up and they stay up all day. But I forget coming back into the garage. Just make the string long enough so you can see it, but not too long that it will be an issue for your car. The pool noodle should be safe so you won't get close lined as you pull in. You just move it up over your head or go slow and let it move itself up and over your head. Use an orange noodle if you can find one.... lol.
As far as the Mower deck, I'm still working on fabricating a pair of auto movers that probably will make moving it easier.
Definitely an orange noodle! Lol. That’s a good idea. 👊
Great idea as a reminder - maybe just take it on the bottom of the door (inside & out). DollarTree had noodles on an outside rack couple weeks ago. *clotheslined
Bout the only one I agree with is the last one you said. I also wish I had git mine earlier. I have had mine, for 5 years. Had zero problems out of it, and I ask alot from it. I feel guilty complaining about the little thing, but goid video 😊
They are such awesome little machines!
Great video. 100% on point....with everything! How are those R14's holding up for you? I have blown out the wall on 2x now on the factory style tire; I must be turning too tight to the left, especially with the bucket loaded. :(
They are doing great! I’ve not had any issues at all and I’ve moved some pretty heavy loads!
@@PeeksPeakHobbyHomestead Thank you!
I hate the quick disconnect of the bucket Hydraulic lines. It cracks and leaks. Have had to have mine replaced 3 times in 2 years so far and I have a 2019 BX18. Other then that love the tractor.
Lots of folks have that issue. I had mine replaced and it hasn’t leaked any more. I’m very meticulous now about turning the machine off and relieving the pressure before disconnect/reconnect. I hope it holds up because when it works right, I love it.
On the Kubota 3350 what causes the main hydraulic ram housing to explode,,,, twice ... Right after being changed, the new one exploded in the Same place ?? Comments appreciated 👍...
Its a MOWER. Unless you need a micro tractor, it's a mower. I have owned my BX for 23 years and its the best engine in the business, and the frame is tough. The mower deck is ok, nothing special. With the Limited slip diff engaged; it will climb a brick wall coated with algae. A GREAT MOWER that can do some other things, but it's a mower.
I needed a micro tractor. I've got both a BX23S and a M100GX. 4 out of 5 jobs on my 20 acres are done by the BX. I can get it into places that I just can't or don't want to get the big tractor. The 4in1 bucket was an exponential boost to its versatility.
Before you buy the R14 tires please check out Good Works Tractor's video on the Kubota BX tractor and the 60" belly mower. He found having the R14 tires with the 60" deck you can't turn as tight as you want because the tires catch the deck so you have to back off the steering to keep the tire clear. John Deere's auto-connect mower deck is by far the best on the market.
I appreciate the heads up. I’m not sure what brand of tire Good Works was referring to, but I put a set of Goodyear R14s on mine with a 60” deck and have no issues turn full lock either direction. 🤷🏼♂️. Probably a difference in brands or something.
Valid points, and I agree. It's a great video .
I love my bx23. Logical complaints with most what you pointed out.. on my 2nd set of r4''s
I just put a set of R14s on and I am very pleased with them.
I would love to change out the split rings on the mower and the 3 point. Where can one find linch pins small enough and strong enough to do the job? The smallest I have been able to find are 1/4". My wife's gator wagon has smaller pins than 1/4" and they do not fit.
Thanks!!!
They have 3/16” on Amazon. I went to tractor supply and bought several small sizes to figure out which ones I needed. I can’t remember the size but they had them in stock.
@@PeeksPeakHobbyHomestead I looked on line at TSC, I'll go in person tomorrow. Thanks!!!
Forgot that damn fuel filter under the tractor. I relocated it first time I changed it. Switch the deck wheels to pins makes it a little easier then those circle things. I also lift the tractor with the loader so the deck can slide under the front wheels. Helps a little.
Yeah fuel filter easily shoulda made the list! 👍
Great analysis, thank you. I have a John deere Z930M and looking to buy a ZeroTurn EV with a 54 In Deck. What is your take on the best Brand and Technology in the market. Your assistance is greatly appreciated indeed. Ivan
I really couldn’t give a balanced answer because Kubota is all I have owned. That being said, I am a satisfied owner and will buy Kubota again. 👍
There are no better solution than buying a dedicated backhoe. Doing and undoing the Backhoe will wear you out. My problem is that it doesn't have enough power to tille. I need 30HP for tilling. The B01 is too high off the ground for my hilly property. I need a low to the ground 30-35 hp tractor with a mower. Can you think of one?
That’s interesting, must be soil types. I run a 5ft tiller with my BX and it does fine. I couldn’t recommend a tractor for you, I honestly don’t have a lot of experience with tractors. Just the BX.
Add a turbo 😁
So right on with number 8!! I tell people all the time “this thing is so handy, if I could get it in my bathroom, I’d wipe my ass with it”! Love the BX!!
I use mine for everything! Haha I was hoping folks would watch to the end to see that I really love it! 👊
I concur and I do love my BX as well.
Just rig up a small whinch on floor to pull deck out from under tractor. Probably get everything at harbor freight for under $100 or a come along. Anchor a chain or bracket to concrete to attach the whinch
That’s a good idea. I actually have now learned how to position the mower so that I can lift the front wheels of the tractor with the bucket and just roll it right under. Works great!
thanks for the video! how big is your yard? I`m trying to understand if the investment is worthy for a 1.5 acres of land
I mow a couple acres. I needed the BX to maintain the other 36 acres, but using it as a lawn mower was part of my justification for pulling the trigger. There might be more cost effective ways, but in the end I just really wanted one.
I wish the headlights were also very bright even the flashers when we are on properties some of the roads are very very busy and sometimes we need our flashers on. Sometimes the flashers are on hours and hours and they’re not also very bright some people don’t see us until they get up on us and yes, that top bar we’ve almost flipped a tractor with it trying to get in low areas. I wish they made that like all you had to do was like make it easier to push it down or something I just feel like the headlight thing, though they could be very brighter or they could be LEDsto make people know you’re there or sometimes when our tractor sit on the side of the road there’s a lot of people that almost hit it or just get extremely close to it cause they don’t see it I don’t know