A great free hack to keep vinyls from unrolling is to use the cardboard inserts from bathroom or kitchen roll. Simply cut along one side and hey presto!
Wow! I stopped watching Cricut hacks because they were always the same hacks. Yours was refreshingly new and useful. Joining your site right now. Thanks for the useful tips!
I have a cricut that I still feel very intimidated with so I really don't use it. Your video has me excited to pull it out and create using your hacks!! I'd love to see a pt 2.
Snap 😂 I’ve done some vinyl transfers but that’s about it. Maybe I should’ve got the joy instead of all that money for a maker 😞 I don’t know where to start tbh and all the houses cost money again x
If you start with small projects, then the intimidation will go away. Try doing some cardstock projects. And cricut's website does offer free learning plans. There's also a few youtubers that offer free tutorials. Find one or two that fit your way of learning. Don't get overwhelmed by over-subscribing as you'll end up getting confused.
I too was intimidated. It took me over a year to open it. On FB and Instagram I've seen these ads for the free workshops and summits. DO THEM!! I have been to enough of them that I'm at total ease now. Especially in Design Space. I've gone from some vinyl on Christmas ornaments too layered paper cards and shadow boxes, and now, I'm waiting for my 11 in 1 heat press. I can't wait!! Do the workshops. They're free and can be rewatched for 24hrs. I just wait for evening and skip the ones I'm not interested in.
I have a Cricket Joy and I have a file box I use to organize my vinyl. I usually get all my vinyl from Amazon because it's cheaper and I already have consistent vendors I buy from. I precut my vinyl to the 4.5 by 12 and organize them by color. I'm actually thinking about getting a four-drawer filling cabinet to store my vinyl in because it will be me more space. Love these hacks :)
Try stretch pony tail holders for your rolls. While I like the slap bracelet idea they can be expensive. Just found this video in my feed. Love the tips. Definitely subscribing.
I love the wrist slaps idea, I've just ordered some. It’s great you can write on them too, as I get my permanent vinyl mixed up with the removable vinyl. I wish the suppliers would print it on the backing paper.
OMG...I also use the "slap bracelet" for my vinyl....I write "perm" "remove" in white board marker on the bracelet. Thanks for explaining all of the tricks simply.
ok, stumbled onto your channel as i went down the rabbit hole. i am pretty fluent with my cricut, but you actually taught me something new, so i subscribed!! thanks
I feel the same as you, I'm pretty good with my machine and thought I knew a lot, I just posted a comment about blades, I have never liked Cricut blaze and always use Amazon aftermarket blades but she had some other hacks that were very useful.
Thank you for sharing, these hack were amazing. my favorite was the organization for your vinyl scraps. I will definitely use the hacks from this video🥰
These hacks are some of the best I’ve ever seen!! Thank you! I haven’t had much luck with the washi setting nore reverse weeding myself but I’m going to keep trying alongside tweaking my cut settings. Thanks again!!
It is one of the best videos I have watched about the cricut machines. I am definitely visiting your page to learn more since I am so new at this that my cricut is still in the box.
Headed to see part 2. Filing scraps was genius it drives me crazy sifting through them all, looking for the right piece or color. Thank u! The slap bracelets wwhhaaat , I jt fell on the floor lol the simplest solution 🤦🏼♀️ Thanks again
Love your videos! I’m new to cricut and wanted to know if you could make a video on how you made the black vinyl leaves and show which settings to use to get that kind of outline? Thanks!!
Over all my years watch these videos, yours was Awesome!! I actually learned new ones and especially thank you for the brief visual on how to reverse weed And when to use it! THANK Y❤U!
I’m so happy to hear that, I’m glad you found it helpful! 💛 thank you so much! I actually JUST posted part 2 if you are interested in checking it out 🥰
I would love to see a part 2. I have thought about doing the weeding from the transfer tape before but didn't know if it would work. Thank you for making me feel more adequate while using my cricut.
Same here! I actually found her video VERY HELPFUL, and not irritating to watch! There are some.that are just mind numbing to listen to and watch, and others that make me want to ch......well, nevermind that!! Lol! Does super glad that I found this channel and I am definitely among the 100K+ subscribers now!! 🎉CONGRATS!
I’m a total newbie to Cricut, so I need all the help I can get. I have a Scan n Cut but got a Joy Xtra for Christmas. Thanks for your well edited video.
I love the structure of your video! It was super informative without it being boring (I think your voice was built for entertainment) and it didn’t have any unnecessary filler information through your whole video. Straight to the point. What it was, how you do it, how useful it is for you, compare and contrast with things! Sorry it’s just hard to come across good informative non boring videos now these days. Thanks this was super helpful!
I’m so happy you found it helpful!! ☺️That’s my main goal when creating these educational tutorials, keeping it straight to the point (without being boring)! Thank you so much for your feedback, I appreciate it 💛
I watch a lot of Cricut videos but you had some new tips I hadn’t seen. I enjoyed your video. I don’t subscribe to many channels, but I did yours. Great job!
Hello, I just subscribed to your channel. I would enjoy a part 2, please. I have a Cricut Maker 3 I bought myself at the end of the 2022 holiday season. That I have yet to use. Here I am 6 months later still SUPER-DUPER excited to research and craft away😊. Currently in the process of designing 4 baby tank top onesies for my friend's son who is due in June 😬. Your information was quite helpful. Thank you for sharing.
Great video ! I have just ordered my first cricut air 2 and am researching all the best tips to start and learn tricks. ! Here in Switzerland this machine is coming out and becomingpopular 👌 finally….thank you for your time 😉💕
Thank you for you video's so helpful. Do you have a link for the foil card stock you used in this video to make the butterfly? Or tell me what weight the stock is so it holds up to the bend. Thank you looking forward to your next video.
Thank you for the wonderful video! I really like how precise and to the point you are. Your speech is perfect, you make everything sound so wonderful, and you didn't miss a beat.
This was so helpful and will help me with the weeding hack! I make intricate cards and weeding the small parts has been such a challenge. You are a great teacher!
Please a part 2. Some of these I do already like the slap bracelets. A few Are new to me like the Cricut vinyl holder. I have it but who would of thunk. You just never know when you will learn something new as I am approx a 10 year Cricuter. Thank you !
So I had a cricut machine for a couple years the maker model and I have not used it and tonight because of ADHD and life I waited to the last minute to make 50 bookmarks I love your hacks thank you wish me luck I'm still trying to figure out how to cut the design I now made lol
PART 2 is now Live on my UA-cam!! Go check it out for 10 more helpful Cricut hacks 🔥
Same here!!!! Like what do I even do ??? I am not worthy of the Cricut
Go to the settings, the gear in the top right corner. lower the speed. I use this feature a lot, bits usually to speed up the videos.
Ok. That slap bracelet tip. ICONIC 👌 also doubles as a nostalgia boost🤣❤️❤️
A great free hack to keep vinyls from unrolling is to use the cardboard inserts from bathroom or kitchen roll. Simply cut along one side and hey presto!
Wow! I stopped watching Cricut hacks because they were always the same hacks. Yours was refreshingly new and useful. Joining your site right now. Thanks for the useful tips!
Glad it was helpful!! Stay tuned for more tips 💛 Welcome to my channel!
Totally agree with you 👍 💯
💯 agreed!
I have a cricut that I still feel very intimidated with so I really don't use it. Your video has me excited to pull it out and create using your hacks!! I'd love to see a pt 2.
😂😂😂😂im the same i have my cricut maker and i dont touched long time ago i used like 5 times😁
Snap 😂 I’ve done some vinyl transfers but that’s about it. Maybe I should’ve got the joy instead of all that money for a maker 😞 I don’t know where to start tbh and all the houses cost money again x
If you start with small projects, then the intimidation will go away. Try doing some cardstock projects. And cricut's website does offer free learning plans. There's also a few youtubers that offer free tutorials. Find one or two that fit your way of learning. Don't get overwhelmed by over-subscribing as you'll end up getting confused.
I too was intimidated. It took me over a year to open it. On FB and Instagram I've seen these ads for the free workshops and summits. DO THEM!! I have been to enough of them that I'm at total ease now. Especially in Design Space.
I've gone from some vinyl on Christmas ornaments too layered paper cards and shadow boxes, and now, I'm waiting for my 11 in 1 heat press. I can't wait!! Do the workshops. They're free and can be rewatched for 24hrs. I just wait for evening and skip the ones I'm not interested in.
@@KaSarr that’s amazing, thank you x
As a newbie in Cricut this video cleared up a lot of my mishaps. Thank you
I have a Cricket Joy and I have a file box I use to organize my vinyl. I usually get all my vinyl from Amazon because it's cheaper and I already have consistent vendors I buy from. I precut my vinyl to the 4.5 by 12 and organize them by color. I'm actually thinking about getting a four-drawer filling cabinet to store my vinyl in because it will be me more space. Love these hacks :)
Definitely a part 2 please!! This is the first "hack" video that has actually been useful for me!! Thank you!!
One of very few Cricut/Cutting Machine "Influencers" that I could actually stand to watch! Lol!
Try stretch pony tail holders for your rolls. While I like the slap bracelet idea they can be expensive. Just found this video in my feed. Love the tips. Definitely subscribing.
This was one of the most helpful videos I've seen, especially for new users.
Thank you
I love the wrist slaps idea, I've just ordered some. It’s great you can write on them too, as I get my permanent vinyl mixed up with the removable vinyl. I wish the suppliers would print it on the backing paper.
I’m wondering which brand you are using that doesn’t have the vinyl type on the backing paper? All of mine is labeled.
Slap brackets -brilliant. Now I’m thinking of million ways to use them! Merry Christmas what a gift that keeps giving ❤😊
Just got my Cricut 3, you are Amazing and I appreciate all 11 of the tips you've shared. I look forward to your 2nd video. Be Blessed!
OMG...I also use the "slap bracelet" for my vinyl....I write "perm" "remove" in white board marker on the bracelet. Thanks for explaining all of the tricks simply.
I MUST make that leaf cup for myself! I'm in LOVE! ❤️
Thank you! I love the way you store vinyl and iron on scraps.
Wow this is the first time watching your channel. All your hacks where right on point. Congrats on your great achievement
I've worked regularly with vinyls for signs and never even considered weeding from the transfer tape. Thank you!
ok, stumbled onto your channel as i went down the rabbit hole. i am pretty fluent with my cricut, but you actually taught me something new, so i subscribed!! thanks
I feel the same as you, I'm pretty good with my machine and thought I knew a lot, I just posted a comment about blades, I have never liked Cricut blaze and always use Amazon aftermarket blades but she had some other hacks that were very useful.
Thank you for sharing, these hack were amazing. my favorite was the organization for your vinyl scraps. I will definitely use the hacks from this video🥰
this was awesome my fave was the filing at the end.
You are a brilliant person! Thank you for all your creative hacks AND explaining each steps "Why" and "How"...No wonder you hit 100k! Congrats!
Thank you so much for your kind comment!! Stay tuned for more 🫶🏻
These hacks are some of the best I’ve ever seen!! Thank you! I haven’t had much luck with the washi setting nore reverse weeding myself but I’m going to keep trying alongside tweaking my cut settings. Thanks again!!
Press N Seal makes an amazing transfer tape for curved surfaces - I use it for appliques on balloons.
It is one of the best videos I have watched about the cricut machines. I am definitely visiting your page to learn more since I am so new at this that my cricut is still in the box.
Definitely have to try that wet vinyl application hack !
Great ideas! I have never heard of a mat extender. Thank you.
You are incredible at putting your videos together👏🏾👏🏾👏🏾👏🏾
Thank you for showing the reverse, weeding hack… I really needed to know this?, thank you
Headed to see part 2. Filing scraps was genius it drives me crazy sifting through them all, looking for the right piece or color. Thank u! The slap bracelets wwhhaaat , I jt fell on the floor lol the simplest solution 🤦🏼♀️ Thanks again
I wish I had known the weeding on the transfer tape last week. A lot of my vinyl pieces kept moving around. I am subscribing to you site. Thank you!
Part 2 please! I have a lot of projects coming up for my daughters weddings and most of these hacks will help me so much. Thank you
I am glad you found it helpful! I JUST posted part 2 if you are interested in checking it out 🥰
So glad that I found your site. That reverse transfer info is priceless. Thanks.
Love your videos! I’m new to cricut and wanted to know if you could make a video on how you made the black vinyl leaves and show which settings to use to get that kind of outline? Thanks!!
Thank god I found your channel! I learned so much with just this video and I’ve been die-cutting for a couple of years! Subscribed
I am glad you found the video helpful!! Welcome to my channel 🫶🏻
Take your time and watch videos. I put mine away for a year, but then decided to try again. It can be intimidating, but you'll get it.
Over all my years watch these videos, yours was Awesome!! I actually learned new ones and especially thank you for the brief visual on how to reverse weed
And when to use it! THANK Y❤U!
I’m so happy to hear that, I’m glad you found it helpful! 💛 thank you so much! I actually JUST posted part 2 if you are interested in checking it out 🥰
This was such a simple powerful video. Thank you so much for sharing ❤😂
As a beginner, I found all of these tips super helpful!!! Thank you so much ❤
You are welcome! 💛 I hope you enjoy using these tips! ☺️
I would love to see a part 2. I have thought about doing the weeding from the transfer tape before but didn't know if it would work. Thank you for making me feel more adequate while using my cricut.
I am happy to help! I JUST posted part 2 if you are interested in checking it out 🥰
Slap bracelets to hold the vinyl rolls. What a genius hack. I will definitely get some of those.
Thank you so much for sharing these ❤ I just started off my cricut journey, glad to have this knowledge early on.
Done! Happy that I found your channel. For a change, UA-cam recommended some thing to me that I could actually enjoy and use.
Welcome to my channel! I am glad you enjoyed the video ☺️
Same here! I actually found her video VERY HELPFUL, and not irritating to watch! There are some.that are just mind numbing to listen to and watch, and others that make me want to ch......well, nevermind that!! Lol! Does super glad that I found this channel and I am definitely among the 100K+ subscribers now!!
🎉CONGRATS!
Dude - you are a genius. These are all gems! Thank you!
I’m glad ghat you’ve finally got a UA-cam channel for your awesome tips. Thanks for sharing.
I’ve been on UA-cam for quite some years now but I’m glad you joined the fun here 💛💛 You are welcome!!
I absolutely loved the information setting for reverse weeding intricate designs❤ loved the video❤😊
I’m a total newbie to Cricut, so I need all the help I can get. I have a Scan n Cut but got a Joy Xtra for Christmas. Thanks for your well edited video.
I love the structure of your video! It was super informative without it being boring (I think your voice was built for entertainment) and it didn’t have any unnecessary filler information through your whole video. Straight to the point. What it was, how you do it, how useful it is for you, compare and contrast with things! Sorry it’s just hard to come across good informative non boring videos now these days. Thanks this was super helpful!
I’m so happy you found it helpful!! ☺️That’s my main goal when creating these educational tutorials, keeping it straight to the point (without being boring)! Thank you so much for your feedback, I appreciate it 💛
OMG! Congratulations!!💜🙌 DONE!!! oh and I love your hacks!!😍
I watch a lot of Cricut videos but you had some new tips I hadn’t seen. I enjoyed your video. I don’t subscribe to many channels, but I did yours. Great job!
I love these hacks! Please do a part 2. I would love to hear any advice you have!
Done. Loved the hacks.
What a helpful video! The best I have seen in a while! Thank you!
Hello, I just subscribed to your channel. I would enjoy a part 2, please. I have a Cricut Maker 3 I bought myself at the end of the 2022 holiday season. That I have yet to use. Here I am 6 months later still SUPER-DUPER excited to research and craft away😊. Currently in the process of designing 4 baby tank top onesies for my friend's son who is due in June 😬. Your information was quite helpful. Thank you for sharing.
I’m impressed! Great ideas-thanks for sharing!
Thank you so much for this video…I am about to purchase my first Cricut and you make it look a little less intimidating 😊
Great video ! I have just ordered my first cricut air 2 and am researching all the best tips to start and learn tricks. ! Here in Switzerland this machine is coming out and becomingpopular 👌 finally….thank you for your time 😉💕
You are doing very well. Great video. Congrats!
Thank you for you video's so helpful. Do you have a link for the foil card stock you used in this video to make the butterfly? Or tell me what weight the stock is so it holds up to the bend. Thank you looking forward to your next video.
Lots of great ideas! My favorite is the slap bracelet idea! Going to try this 😊 thanks!
I would love to see a second video. These were great tips I am going to use them. Thank you for sharing them
You are welcome! I JUST posted part 2 if you are interested in checking it out 🥰
Congratulations on meeting 100,000 subscribers!!! Thank you so much for sharing your tips and tricks with us, blessings!!!
You are really creative!! I love that book mark you made.. just one more chapter is what I say all the time haha. I can't help it. But fr amazing!! 🙏🏻
Thank you for the wonderful video! I really like how precise and to the point you are. Your speech is perfect, you make everything sound so wonderful, and you didn't miss a beat.
Love these tips. Especially the slap bracelets. How do you store your 12x10 sheets?
Just found your channel and I’m glad I did. Love the hacks. I store my scrap vinyl and HVTs the same way.
GREAT tips! Thank you & of course … make more! ❤❤❤❤
This was so helpful and will help me with the weeding hack! I make intricate cards and weeding the small parts has been such a challenge. You are a great teacher!
OMG!! This was amazing. So many hacks...I'm blown away. Thank you for sharing!!😍😍😍
TIP: Use an offset around tiny fonts you cut in vinyl. That is easier to weed than reverse weeding.
WOW! Great tips and delivered so well - good job! Such an efficient presentation of info
I’m glad you enjoyed it!! Thank you so much ☺️
Fantastic! Thank you so much for this. I'm fairly new to cricut, so these hacks are a godsend
Very good tips and hacks. Thank you for sharing. I loved them. I have a Cricut Joy.
loved the reverse weeding,. saves me a lot of time
I soooo love your scrap storing!!!
Please a part 2. Some of these I do already like the slap bracelets. A few Are new to me like the Cricut vinyl holder. I have it but who would of thunk. You just never know when you will learn something new as I am approx a 10 year Cricuter. Thank you !
This so helpful! I will be hand making my vet tech we presents and I definitely need these advice on the intricate cuts and applying to a cup.
Omgosh! Thank you so much!! These are really going to be so helpful!! ❤
Yes, thank you so much for those hacks of some of my have not seen before. Thank you thank you thank you please do part two.
Glad you found them helpful! Part 2 is now up on my UA-cam channel if you would like to check it out ☺
Sehr gute Ideen. Das mit der Strage Box hat mir auch gut gefallen. Danke
I've been crafting for over 25 years and learned a lot. Great little video.
Glad you found it helpful! Thank you 💛
You did an amazing job with this tutorial. I am looking forward to a 2nd, 3rd & 4th one🤗.Thank you so very much!
Thank you! Glad you found it helpful. I JUST posted part 2 if you are interested in checking it out ☺️
I'm a newbie to cricut, this will be very helpful in the learning curve.
You will definitely find them handy! Good luck with your Cricut Journey 🙌🏼
Thank you so much. Your hacks are the best I've come across, really made sense of many issues I have 🎉
Loved this. Just getting into crafting with my circut and this was a big help
So I had a cricut machine for a couple years the maker model and I have not used it and tonight because of ADHD and life I waited to the last minute to make 50 bookmarks I love your hacks thank you wish me luck I'm still trying to figure out how to cut the design I now made lol
Yeah, the mat extender is invaluable.
As a beginner.. thank you.. very easy to follow you😊
Yes! Yes! Yes!
Thank you! I’ve never understood the reverse weeding process before!
I loved this video. I am going now to binge your videos! Yes please on a part 2!
Thank you, I’m glad you found it helpful! I just posted part 2 if you are interested in more tips 💛
I prefer storing my vinyl flat so it sticks to the mat better and doesn't try to curl back and roll up on itself as the mats lose their stick.
You had me at the 1st DIY! What fabulous ideas! That wrist slap idea is awesome! I can't wait to try your DIY's. Would love to see a part 2!
I’m so happy you enjoyed the video! I JUST posted part 2 if you are interested in checking it out 🥰
This is an awesome video! I have learned so many great things! Thank you for sharing your knowledge! Love your channel❤.
Thank you so much for the small detail reverse hack I can’t see well and this helps me so much 😊
Congratulations on your award. I love your hacks. Thank you very much for all the good hacks!!
❤❤
I have the mat holder for my cricut. It works great.
The slap bracelet hack is genius!
The foil ideal was my fav.
First time viewer. Great video. Thanks for sharing, and congrats on hitting 100k!... V
Done. A Touchof Diy. Love these hacks! Congrats on 100k subscribers!
Just found your channel. Love your tutorial style!🎉
💯 agreed 😁
And congrats on 100k! What a huge accomplishment!