Buenos días Filipo felicitaciones una pregunta el freno de disco es de bicicleta o de motocicleta gracias otra pregunta me puedes decir las medidas largo ancho y de que diámetro son los tubos que utilizastes para el chasis gracias desde Colombia
Donde consigo el motor y el diagrama de ese invento es para una causa noble quiero devolverle ese privilegio a quien por salud y dinero es limitada la movilidad
Great proyect, I just want to commend few possible improvements that come to my mind: 1) Without a differential or a false differential (double free wheel) perhaps it would have been better to leave one of the two rear wheels free, and not fixed to the axle, to avoid the effect of drag in curves. 2) The axis is threaded, and is leaning directly on the bearings. This causes friction, and with this occurs premature wear of both the bar and the bearing. Ideally, this section should be smooth. This axis could be adapted by adding a very fine hollow pipe on those parts. If it is not fine enough, you would have to increase the size of the bearings to achieve it. 3) It is preferable to make a screw or bolt connection to the wheel, so that the wheel can be replaced using screwdrivers or wrenches, without having to change or modify the axle. I am not clear if the axle was fixed to the wheels or only to the adaptation, if it was the second case, the reverse could unscrew the wheel. That is why it is better 3 or 4 screws that fix to a spindle end.
Esta buena la idea nada que veo unos problemas ,,el primero el tipo de motor segun veo es un arranque de moto ,,no durara mucho porque se le acabaran los carbones o escobillas del motor ,,,lo ideal seria un motor sin carbones o escobillas ,,por ejemplo un motor de overboard seria el ideal ,,pero tambien se puede con un alternador de carro ,,aunque el mas eficiente es el motor de overboard
THIS IS ELON MUSK
TESLA'S COFOUNDER AND CEO
Elon is an inventor
@@MuSiCa-_-1 no, he is a biologist :B
@@muki3856of space x
Buenos días Filipo felicitaciones una pregunta el freno de disco es de bicicleta o de motocicleta gracias otra pregunta me puedes decir las medidas largo ancho y de que diámetro son los tubos que utilizastes para el chasis gracias desde Colombia
0:52 отличный узел, работающий на смазке из резьбы 😁. На полчаса его хватит.
That is a lot of stuff for $100.
Lol
Просто вся эта машина стоит 100 🖕
@@bobboboff5326no it cost more
I agree. This is absolutely bonkers. Give us a part list.
If at 8:46 there were a message saying "professional driver on closed course" I would have been endlessly entertained. Great build.
Que tal si colocas la lista de materiales y nos sugieres donde podríamos encontrarlos. 🤔
আঙ্কেল মোটর তা দাম কত তা পারলে আমাকে একটু বলি আপনি কোন জাগায় থাকেন কোন দেশের থাকেন গাড়িটা নাম কি ব্যাটারি কত ভোল্টেজ ❤ধন্যবাদ
Please let me know the name of electric device you are using to vary the voltage making it act like accelerator
Saludos Filipo tv desde México
Gran talento.
Good idea brother, but your rear wheel is to far from the frame it might dent when you run fast.👍👍.
( RJ BRAZIL )BOA TARDE SEU TRABALHO FICOU MAGUINIFICO PARABÉNS
Very nice. Please let me know about electric motor specifications. Thanks ❤
Yo igual quiero saber, creo que es un motor de arranque de carro o moto
Cuál es el modelo del motor amigo?
Donde consigo el motor y el diagrama de ese invento es para una causa noble quiero devolverle ese privilegio a quien por salud y dinero es limitada la movilidad
Please, can you enlist items....
Or tell me the source where from I get it?
Hola amigo buen día, no lo vendes ? O si me podrías fabricar uno , soy de Perú
Isso não dá certo porque o motor de partida não foi feito pra funcionar por muito tempo 😔
Itu batri bisa tahan jarak berapa KL bos
Estimado una consulta el motor que estás usado en donde lo. Compraste
Ese burro de arranque... es para andar 1 minuto sino se quema.
jos mantab, always work successfully, I hope you have a long life, lots of good luck, amen.
ជំរាបសួរ ពីប្រទេសកម្ពុជា សូមកោតសរសើររបៀបរបស់អ្នកងាយយល់ណាស់
Hola. Ese motor es un limpiaparabrisas?. Y si lo es, cual es su amperaje?. Desde Arg. Muchas gracias
Great proyect, I just want to commend few possible improvements that come to my mind:
1) Without a differential or a false differential (double free wheel) perhaps it would have been better to leave one of the two rear wheels free, and not fixed to the axle, to avoid the effect of drag in curves.
2) The axis is threaded, and is leaning directly on the bearings. This causes friction, and with this occurs premature wear of both the bar and the bearing. Ideally, this section should be smooth. This axis could be adapted by adding a very fine hollow pipe on those parts. If it is not fine enough, you would have to increase the size of the bearings to achieve it.
3) It is preferable to make a screw or bolt connection to the wheel, so that the wheel can be replaced using screwdrivers or wrenches, without having to change or modify the axle. I am not clear if the axle was fixed to the wheels or only to the adaptation, if it was the second case, the reverse could unscrew the wheel. That is why it is better 3 or 4 screws that fix to a spindle end.
Can u pl?
why need differential in go karts ? Those things are made for drifting
Esta buena la idea nada que veo unos problemas ,,el primero el tipo de motor segun veo es un arranque de moto ,,no durara mucho porque se le acabaran los carbones o escobillas del motor ,,,lo ideal seria un motor sin carbones o escobillas ,,por ejemplo un motor de overboard seria el ideal ,,pero tambien se puede con un alternador de carro ,,aunque el mas eficiente es el motor de overboard
what type of electric motor did you use?
Bike self motor
Meus Parabéns Seu Projeto Ficou Ótimo Voce é Super Inteligente
Củ đề chạy vài chục m là cháy củ đề luân phát minh này ko thực tế
Carajo esto es villa el salvador-Perú .... Hermano genial .... Este tipo de vídeo necesitaba .... Cuánto tiempo dura con esa batería???
El motor es de limpiaparabrisas??
Este motor sive para un triciclo bateria 12v con carga de panel solar . Daonde comprarlo .desde ya graciad ....
Great project go kart. Only would like to have seen a helmet worn !
Wanted to make Foot start switch for DIY Go-Cart project.
Eres un bravo en lo q haces, mis respetos bro.
Esta de parabens
Gostaria de sabe as medidas de tudo q o senhor fez no carrinho
Brilliant idea using threaded studding as axle,, thanks
Ахах 😁
Me puedes decir las medidas
Buenos días Filipo el motorcito eléctrico de que es.?
Boludo vas a romper el rodamiento metiendolo a los martillasos asi 👀
Приветствую. Огонь аппарат. Новых идей. Всех благ.
Buenas tardes desde Colombia que tipo de motor utilizaste
Me interesa mucho el tema de la transmisión, que espesor tienen el plato-corona y el piñón, para poder acoplarlo al Arranque-motor?
Ola que tal Filipo disculpa los demás carritos o go Cars que los ases
Que motor ocupas?
give me the list of materials to be build or how?
Very good job,, you need to add alternator to charge the battery
No such thing as a free dinner Matey :(
Que tipo de motor de arranque es ese de moto o de carooo ?????
What if you use car starter motor is going to perform better or not
Jajaja nmms una marcha
Bendes los planos?
Мотор - стартер от альфы, и надолго такой хватит?
Amigo buenas
Watch out for the temp, those motors aren't meant to be run for too long
Thêm số lùi nữa là ok
Nice work.
What is the size of rear axle i mean diameter?
Donde se puede pedir ese motor eléctrico
como se llama el motor que acoplaste a carrito
You are so very gode tank you brother
Is this a car starter motor to run this?
Muito show gostei muito do seu trabalho parabéns 👍🏻🙏🏻🇧🇷
Itu saklar gasnya pakai type apa
Hola dónde compras el motor electrico
what motor are you using?
Felicidades hermano, que posibilidad hay q me facilites el plano del carrito...
only one starter motor? power weak
Que acceleratot uses ? Gracias
Vc é um gênio
Cómo se llama ese tipo de motor
Show de bola
Brava! Simple,and fun too.
You too much sir, well done!
Projeto simples e legal... Poderia informar que tipo de motor e a tensão da bateria que vc usou? 👍
Só que pra usar como motor assim não presta .dura pouco .pois motor e escovado e engrenagem e de plástico . E só pra partida mesmo rotineiras
Ok...obrigado...entendi...Mas, te deixo uma boa sorte com seus projetos...Estou sempre na expectativa...
These motors overheat like hell. The armature windings and brushes are easy to wear. You should invest in high quality brushless motors.
It needs a controller
tuyret voi
Very good 👍 👏 👌 😀 ☺
What motor you used?
❤❤😂❤
una pregunta amigo cuantos litros de aseite le caben a ungenerador 5.5 caballos
HOLA ERES DE LIMA ?
Como se llama el motor
Que motor usaste?
Que motor usa??
Que motor usaste?
Great Job!
Great Job!
too cool. :)
eres de PERÚ?
Specifications
What is the name of throttle divice
Plesss reply
Me interesa los planos gracias
Good 👍👍👍😁
Awesome!
Great 👍
hp?
Гоу карт імітатор.
Beautiful work
Una pregunta cómo haces para cargar la batería
tienes q tener un cargador de bateria
Que tipo de motor ese ese amigo motor de arranque de moto? Mas su chi harra
😂😂😢
Ok Like 🤔👍🤙👉👉🔔🔔🔔
🤣🤣🤣🤣🤣🤣🤣🤣🤣😭🤣