New first time dad here. I spent 45 minutes reading the installation guide and still confused!!! Your video was amazing and so easy to follow along, I installed it while watching this video in less than 15 minutes and learnt so much more than the guide. Thank you so very much!!!
First time viewer of this Chanel. Wow this video was so helpful. We will use your video on how to strap the baby next in preparation of our newborn coming home after Christmas 2024 (we hope not before but you never know! Lol). Thank you for the high quality and straight forward information. Excellent video.
Thank you! Your video was very helpful. The hardest part for us was definitely getting the rigid anchors to latch inside the seat. Wow we had to use a lot of force, they seem like they barely reach.
For seatbelt-only installation, how do you adjust the recline of the seat for different aged babies? Traveling this week with our three-month-old and will be leaving the base at home.
I watched this video hoping to get advice on how to achieve leveling on the blue line (mine is installed with the rigid latches in a new Yukon xl & I don’t feel like it’s level). It wasn’t covered but is the info somewhere else? Great video otherwise.
Without middle seat anchors, what’s safer, a seat belt only installation in the middle seat or a latch and seat belt installation in a side seat? I feel with seat belt only there’s more side to side movement, but in the middle seat the baby is more protected from side collisions?
Wherever you can get a tight installation is the best spot! Usually, this seat is easy to install with either method, but the rigid lower anchors are the easiest method.
we are watching your infant course and just tried to install the car seat. we used the base with lower rigid achors. Once we added the carseat on top the blue line was not completely level with the floor with the recline in position 1 and it was even more slanted in position 2. we also are using the rebound bar. it did look similar to how yours looked in the video, which was pretty level but slightly slanted. let me know if this needs to be troubleshooted more. thank you
Hi thank you for the great video. If theres method #4 (European belt route method), do I even need to buy the base? What is the benefit of having the base (methods 1-3) in comparison to method #4?
The base comes with the seat already. But if you'll be using a 2nd vehicle, you can choose to install it without the base if you'd like to save money instead of buying a 2nd base. Benefit of the base is just convenience
First time mom and having trouble figuring out what side the car seat should be installed for a newborn, behind passenger or driver side seat? Is there a rule for this or is it preference?
One of the little pop ups on the video said if your babe can support its neck or head before its 20 lbs I believe but if you rewatch somewhere in the beginning theres a popup on the screen that says it
I have a car that seems so have angled back seats (so the top Of the car seat seems higher than it should), I’ve noticed that the car seat seems to have a more of an incline even in position 1, is this something I’m doing wrong?
I wish I had rigid lower anchor connectors on my infant seat base! I have the Safety first onboard and I struggle so much with loosening the lower anchor connector strap to take the base out of the car!
New first time dad here. I spent 45 minutes reading the installation guide and still confused!!! Your video was amazing and so easy to follow along, I installed it while watching this video in less than 15 minutes and learnt so much more than the guide. Thank you so very much!!!
I'm glad you found the video helpful! Thanks for watching!
Great illustration, thank you
New dad here, thanks for making this installation so easy , its much appreciated 🙏🏽
Glad to help!
Rookie dad here. This video was so helpful, you are the MVP!
I'm glad you found the video helpful!
Watched this video while installing our Nuna! Thank you so much!
Thanks for watching it!
I feel much more confident after watching this! Thank you!
Excellent!
Thank you thank you thank you! This video helps so much! First time dad, you saved me! All my questions were answered
Glad I could help!
I’m an aunt and need to install this seat in my car for emergency day care pick-ups etc. This video made it so easy to install! Thank you!
Great to hear!
Just what I needed as our little one will be joining us soon. Thank you!
You are so welcome!
New dad to be here! Thank you for this helpful video!
Glad it was helpful! Thanks for being here!
Great video thanks! After watching this video, was able to install the base and car seat in less than 10 minutes.
Great to hear!
So helpful, first time parent and this made the installation easy, thank you so much!
I'm glad, thanks for watching!
First time viewer of this Chanel. Wow this video was so helpful. We will use your video on how to strap the baby next in preparation of our newborn coming home after Christmas 2024 (we hope not before but you never know! Lol). Thank you for the high quality and straight forward information. Excellent video.
Thanks for watching!
you are doing great things for new dads
It's for anyone!
First time dad- this video was PERFECT! Thank you so much!
You're so welcome! Thanks for watching and congratulations!
Thank you this perfect and what I was looking for
Glad I could help!
Wow! This is the perfect video I need for the safety of my newborn!
Glad it was helpful!
Thank you! Your video was very helpful. The hardest part for us was definitely getting the rigid anchors to latch inside the seat. Wow we had to use a lot of force, they seem like they barely reach.
It can be difficult to access the lower anchors in some vehicles, unfortunately.
Super helpful video as a grandma viewing.
Glad to hear that!
awesome video - great job!
Thanks for watching!
Thank you for making this video! So helpful
Glad it was helpful!
This is the video I needed. Thank you!
Glad it was helpful!
Excellent video! Please do Nuna Exec car seat
Eventually I will!
Thanks so much for creating this video. Super helpful; I subscribed.
Thanks for subscribing and I'm glad you found it helpful!
For seatbelt-only installation, how do you adjust the recline of the seat for different aged babies? Traveling this week with our three-month-old and will be leaving the base at home.
There is only one allowed recline for the baseless installation. There is a line on the side of the seat that must be level with the ground
Thanks
Thanks for watching!
Thank you!
You're welcome!
Thanks a lot, very helpful!
Glad it helped!
Can the seat be installed without the base ?
This video was super helpful. Thanks for posting this !
Yes! That method is in this video starting around 15 minutes in
I watched this video hoping to get advice on how to achieve leveling on the blue line (mine is installed with the rigid latches in a new Yukon xl & I don’t feel like it’s level). It wasn’t covered but is the info somewhere else? Great video otherwise.
The blue line on the side is only for the baseless installation.
Great video. Thank you!
You are welcome!
soo helpful! thank you!!
You're so welcome!
Without middle seat anchors, what’s safer, a seat belt only installation in the middle seat or a latch and seat belt installation in a side seat? I feel with seat belt only there’s more side to side movement, but in the middle seat the baby is more protected from side collisions?
Wherever you can get a tight installation is the best spot! Usually, this seat is easy to install with either method, but the rigid lower anchors are the easiest method.
Very well in depth
Thanks!
we are watching your infant course and just tried to install the car seat. we used the base with lower rigid achors. Once we added the carseat on top the blue line was not completely level with the floor with the recline in position 1 and it was even more slanted in position 2. we also are using the rebound bar. it did look similar to how yours looked in the video, which was pretty level but slightly slanted. let me know if this needs to be troubleshooted more. thank you
The blue line on the car seat is only for the installation without the base
thanks so much!!@@safeintheseat
Hi thank you for the great video. If theres method #4 (European belt route method), do I even need to buy the base? What is the benefit of having the base (methods 1-3) in comparison to method #4?
The base comes with the seat already. But if you'll be using a 2nd vehicle, you can choose to install it without the base if you'd like to save money instead of buying a 2nd base. Benefit of the base is just convenience
Oh ok thanks!
Thanks super helpful!
Glad it helped!
When using the base-- Does the seatbelt need to be locked off or is this a true lock off in the seat? Thanks!
The base has a true lock-off so you don't need to lock the seat belt!
This video was super helpful!
Can the seat in front of the car seat be pulled back and touching the car seat?
It can lightly touch it
First time mom and having trouble figuring out what side the car seat should be installed for a newborn, behind passenger or driver side seat? Is there a rule for this or is it preference?
Wherever works best for you and you get a tight installation is fine!
Does the Nuna PIPA Relx base install in the same way?
This is the Relx base
@@safeintheseat thanks!!
If you use the rigid lower anchors can you also use the seatbelt too - or should it just be one or the other?
You don't need to use both. But Nuna allows it with this seat. There is no safety difference.
What if the load leg fully extended doesn’t hit the floor? I have it secured to the seat anchors but the load leg doesn’t hit the floor.
That's very surprising. If it doesn't touch the floor, then you cannot use it.
When do I move from position 1 to position 2 for the incline? I know when to jump to 3&4 but is there a weight to move from 1-2?
One of the little pop ups on the video said if your babe can support its neck or head before its 20 lbs I believe but if you rewatch somewhere in the beginning theres a popup on the screen that says it
Positions 1 and 2 are for up to 20 pounds. I would leave on the most reclined position until you can't anymore due to weight
So helpful!
Glad you think so!
Question… I was told Nuna’s preferred method of install is a seatbelt but you say to use anchors instead of we have them?
For Nuna's convertible car seats, the seat belt is the preferred method. For the infant seats, the rigid lower anchors are the preferred method
Good video thanks 🙏
Thanks for watching
I have a car that seems so have angled back seats (so the top
Of the car seat seems higher than it should), I’ve noticed that the car seat seems to have a more of an incline even in position 1, is this something I’m doing wrong?
Almost all cars have sloped vehicle seats. Recline 1 is likely suitable for the newborn as long as the car seat is installed properly
I thought middle seat is safest because of side airbags? Genuine question, ftm here
Nope. Side air bags actually improve the safety of the outboard seats. They are not dangerous to be next to car seats.
I think the handle does need to be in the upper position in Canada. I have this seat, and I’m pretty sure that’s what I’ve read.
Canada does not have this version of the Nuna Pipa. The Canadian Nuna Pipa does require the handle to be up
Any promo codes
Nope. We check every day for sales though. We keep that here: safeintheseat.com/sits-recommended-car-seats/
I wish I had rigid lower anchor connectors on my infant seat base! I have the Safety first onboard and I struggle so much with loosening the lower anchor connector strap to take the base out of the car!
It's much easier to use the seat belt with that base if you are taking it out of the vehicle frequently.
Very helpful. Thank you.
Glad it was helpful!