Mike, you should make a sheet metal tub for your plasma table. Fill it with water so your parts are cold after you cut them out and it helps with warpage too and cuts back on smoke as well. I have one on mine and i love it. Love the videos!
Watching you guys makes me want to go dwn there on my own dime just to hang out...building custom cars and having a great time doing it...thank you for showing people that passion pays off
I am officially out of comments but I still admire the skill and workmanship. But not as much as I admire the attention to be a top quality shop for every build. Nicely done.
Mike, Brother your work is awesome, you have saved the owner of this truck from 10,000 disasters in the coming years. like you I was taught to think about the next man who has to follow my work. mike
Love the music and cutting up in the shop , I miss that shit ! Caterpillar has a good attitude and goes along with yo brainwork ! 🧠 Not everyone gets your visions but you make it fun !
The struggle is real. I could feel your aching arms under that dashboard. Loved all the fab work, especially for getting that condenser to cooperate with the space.
My father was the sort of carpenter who would start with an empty lot and end with a finished house; doing everything from concrete slab to interior trim and cabinetry. I had long ago felt that sort of total grasp of all trades had vanished but Bello's has shown me that here is the sort of genius and mastery of craft and tools still lives and someone can start with nothing but finish with museum grade quality results. Rock on, Mike. Rock on. You are the man.
Hey great work love your post. I'm working on a 47 chevy PU and the guy before me F'ed everything up now I have to correct all the crap. Saludos des de Mercedes Tejas.....
I feel you homey working upside down under a dash with chit poking you in the back I totally get it! Love the channel, you two are funny as hell to watch ! Keep up the good stuff my friend.....suave😁
Man, trying to stuff that a/c unit back under the dash is like stuffing 10 pounds of shit into a 5 pound sack. I'm glad Carrapila was there to keep you straight, Mike. 😂
Hello Mike. When I’m under a dash or even under a car with jack stands, geez my neck, back, and legs. I’m 63 and it don’t get any better. Truck will be tops when you’ve finished. Keep having fun.Tim.
I Love watching you work Mike ! U a Bad Man or UDAMAN! It Ain't nothin that you can't figure out on a Car or Truck , Can't wait for the next Post (Hurry up:) BIG DAWG
Nao me canso de axistir..esses videos...nao me inporto se ja faz um ano..mas oque inoorta eo trabalho entregue em cada serviço..prestado ..por esse metaleiro a nos telespectadores...amante de carros...Raros
Awesome work Sir! I always thought (part 2) that you needed to single flare fuel line, even if it was going into a rubber line w/a. clamp. I guess it makes it easier to swap the rubber section if needed? Enjoying the vids!
Many improvements in that truck since you started on it . That owner should carry an extra coil in that truck for when it fails far from home . Ask me how I know . has happened twice on two different cars they just aren't the quality they used to be from MSD they look good but have a problem with windings inside .
Great stuff. Do you have a preferred electric fan for the California heat. I’m trying to keep my big block 40 dodge coupe cool. Any help would be greatly appreciated . Lokochon Dan
Mike did you know when ya have a aluminum radiator you should always use distilled water to prevent electrolysis that's when you mix 2 different types of metals like when you do a plumbing repair ya can't connect a copper line to a galvanized line w/o using a die electric union or a brass nippel if ya connect the 2 it will rot out faster
Whomever is filming and editing this channel deserves much respect!
I like how Mike stamps all his custom parts. No mistaking who fabricated anything when is comes to Bello's Kustoms!!!
One of the best channels on UA-cam. Keep them coming big homie.
Definitely one of the best channels on UA-cam ageeed!
by far this is my favorite Kustoms shop. Following from New Orleans LA
He said “paint or it gets rusty” then you see a sticker on the lift that says “rust is not a crime” lol
Mike, you should make a sheet metal tub for your plasma table. Fill it with water so your parts are cold after you cut them out and it helps with warpage too and cuts back on smoke as well. I have one on mine and i love it. Love the videos!
Yeah that's a good idea but sometimes it tempers the metal and then it cracks when you make a brake on it
@@BellosKustoms that is very true I forgot you brake alot of stuff. I'm too broke for a brake so I weld all my bends haha
Watching you guys makes me want to go dwn there on my own dime just to hang out...building custom cars and having a great time doing it...thank you for showing people that passion pays off
I am officially out of comments but I still admire the skill and workmanship. But not as much as I admire the attention to be a top quality shop for every build.
Nicely done.
No pain, no gain. The humor takes the edge off it. Top quality Boss!👍
I just stumble in your channel and I am Hooked now, love all the pride you take doing your builds, No chicanadas !!
Lol @ " Its almost like we're professionals." Mike you are more than a professional you're a top notch master craftsman
PURE EXCELLENCE BY BELLO'S KUSTOMS!!! GREAT VIDEO MIKE!!! HAT'S OFF TO THE CAMERA MAN!!
I’d love to see Mike’s invoice for the AC installation.
Lol you don't wanna see that homie
Mike, Brother your work is awesome, you have saved the owner of this truck from 10,000 disasters in the coming years. like you I was taught to think about the next man who has to follow my work. mike
Nice to see the Zephyr in the back ground. Can’t wait to see that car finished
Watching this is the best way to end a great weekend, all hail King Mike
Love the radiator brackets and the COOL job on the AC🥶👏
Love the music and cutting up in the shop , I miss that shit ! Caterpillar has a good attitude and goes along with yo brainwork ! 🧠 Not everyone gets your visions but you make it fun !
Mike, another great episode. Love watching you and your partner work together. Thanks
"Clean, clean, pinky ring!" Always looks good!
The struggle is real. I could feel your aching arms under that dashboard. Loved all the fab work, especially for getting that condenser to cooperate with the space.
Pure Mexican Ingenuity (PMI) Great rework to give it a professional appearance by Locochon. 👍🛠😎
My father was the sort of carpenter who would start with an empty lot and end with a finished house; doing everything from concrete slab to interior trim and cabinetry. I had long ago felt that sort of total grasp of all trades had vanished but Bello's has shown me that here is the sort of genius and mastery of craft and tools still lives and someone can start with nothing but finish with museum grade quality results. Rock on, Mike. Rock on. You are the man.
Bello's always with good content...firme
Great to see real men with mad skills.
See the work that has gone on in to that one bracket that goes through the fire wall for the air con. that is craftmanship to be sure.
I like watching Bellos. It adds to my repertoire of Latino cuss words. Haha
Always did want to see a AC installation.
Mike is one of the best builders and fabricators I've come across. Love watching him work. Like his attitude, sense of humor, and he's a hard worker.
Thanks for the update on the pickup truck. It’ll be real nice when you get finished.
Another good video Mike, comedy was hella funny. You and Carapila are fun to watch, can't wait for the next one bro👍🏼😎
Hey great work love your post. I'm working on a 47 chevy PU and the guy before me F'ed everything up now I have to correct all the crap. Saludos des de Mercedes Tejas.....
One of the best channels on UA-cam LOKOCHON😉
Pinche Kattapilla is the King of Air Conditioning 😝
Another piece of the puzzle done properly. Good job guys, whew!!
Damn homes. Prefab straight from Home Depot Vista Avenue. Diego School of knowledge.
Los Vatos Locos.
Cheublé. Clearwater.🤙🏾👍🏽👏🏽🙏🏽😁😊🙋🏽♂️😎.
I've never had any luck running two fans, one good one pulling on the engine side should be enough, that's all we use even in Phoenix!
I'm starting to think Mike's jealous of Carapilla's hair! heh-heh-heh!
Love watching the “bracket master “ at work .
I feel you homey working upside down under a dash with chit poking you in the back I totally get it! Love the channel, you two are funny as hell to watch ! Keep up the good stuff my friend.....suave😁
Man, trying to stuff that a/c unit back under the dash is like stuffing 10 pounds of shit into a 5 pound sack. I'm glad Carrapila was there to keep you straight, Mike. 😂
Nice job on that AC Lines Dude that is a tight fit Nothing like watching an expert work all your shit is 1st class nice job love the video thanks
Hello Mike. When I’m under a dash or even under a car with jack stands, geez my neck, back, and legs. I’m 63 and it don’t get any better. Truck will be tops when you’ve finished. Keep having fun.Tim.
Mike and CCR rocking! Good Times
really glad to see some captions! can finally figure out what folks are saying even with the tool noises
Always happy to see a new video posted. Your attention to detail is amazing. You are truly a master of your craft.
Saludos Bellos, you Rock bro.. from Ocala Florida
I Love watching you work Mike ! U a Bad Man or UDAMAN! It Ain't nothin that you can't figure out on a Car or Truck , Can't wait for the next Post (Hurry up:) BIG DAWG
Mike you are the best ! thanks for video.
Great video 👊
Excellent work You're a Grand Master at this Lokochon!!!
Nao me canso de axistir..esses videos...nao me inporto se ja faz um ano..mas oque inoorta eo trabalho entregue em cada serviço..prestado ..por esse metaleiro a nos telespectadores...amante de carros...Raros
So much bondo i thought the cab was fiberglass at first hahaha
Love the show and how you guys get along
Ajá la jalea chulada de jales batos que se escuche ese rap saludos desde México
Ese Mike you're right, you are a fabrication genius. Beautiful work installing the AC and fans on the Trokita. Ay los watcho.
Awesome work Sir! I always thought (part 2) that you needed to single flare fuel line, even if it was going into a rubber line w/a. clamp. I guess it makes it easier to swap the rubber section if needed? Enjoying the vids!
Master of Making Brackets, Great Cad Work. Let Chopolene jump in LOL Showwwww...😂
You are the bracketmeister extraordinaire!
The simple brake job leads to wiring, AC, ect. But its done right and thats how its done!
Excellent job Mike looking good
When your inner Mexi-CAN wins over your inner Mexi-CAN'T. Adapt and over come!
More please young man !
You the shit brother love wacthing you work
Cool Mike liking it 👌
GIT DOWN LOCOS MY RESPECTS 👊🏽👊🏽👊🏽
Bracketman!! Awesome.
This night I saw my first Starlink in south France: More then one hundred flying shits in the evening sky. Nothing compares to Bello's...Peace
Custom wrench 😊👍🏻
Ready to order some c notches & 2link lol for my ranfla, stop f***king around already homie, lol
CARAPILLA AKA McLOVIN ❤
Great Video.
#STAYSAFE
#PHILLYPHILLY 🇺🇸
mike is solid as fuck man. keeps the content super real. keep it coming homie.
Many improvements in that truck since you started on it . That owner should carry an extra coil in that truck for when it fails far from home . Ask me how I know . has happened twice on two different cars they just aren't the quality they used to be from MSD they look good but have a problem with windings inside .
LOKOCHON TIME!!!
Thanks for sharing!
Jajajaja jajajaja peleando con Carepilla 😊 Saludos 👍 muchachos
Saludos cordiales!
LOKOCHO STYLE 💥
PROFESSIONAL 100 %
O melhor 🇧🇷🇧🇷🤟🤟
Wow. I'm #1
#STAYSAFE
#PHILLYPHILLY 🇺🇸
damn. That looked like 1/2 inch of bondo on the firewall. I wouldn’t want to see what’s underneath
i was thinking the same thing .. yuck
The majority of these Cars are like that..
Kicking ass!!!
Daamm homie thats how it should be....making shit work and the right way all LOKOCHON STYLE 🕴️🇲🇽💯😎
Parabéns...👏👏👏👋Brasil
Nilce work
Great stuff. Do you have a preferred electric fan for the California heat. I’m trying to keep my big block 40 dodge coupe cool. Any help would be greatly appreciated . Lokochon Dan
Mike did you know when ya have a aluminum radiator you should always use distilled water to prevent electrolysis that's when you mix 2 different types of metals like when you do a plumbing repair ya can't connect a copper line to a galvanized line w/o using a die electric union or a brass nippel if ya connect the 2 it will rot out faster
👍
Carapilla 💪
maestro
🇧🇷🇧🇷
I Love Catapilla! lol
Mike where can I buy some of them black loco chones you wearing?
Sube videos de la studebaker pickup por favor!
Is they still in business?..?
17:53. STP - Is it from Russia?
Man, you two should work at NASA bulding rocket ships to Mars
Yeeeeeeeh