Man Fully Restores Abandoned V8 Chevrolet C10 | Start to Finish Build by

Поділитися
Вставка
  • Опубліковано 3 лис 2024

КОМЕНТАРІ • 424

  • @FLManGarage
    @FLManGarage Місяць тому +48

    Thank you for your share! I reply to all comments on the original video on my page if anyone has any questions or more details. 😃

    • @TechFreezeOfficial
      @TechFreezeOfficial  Місяць тому +4

      Thank you for your cooperation, and best of luck with your future projects!

    • @Praise___YaH
      @Praise___YaH Місяць тому +1

      Guys, Here is The Savior
      HalleluYAH - Hallel u YAH - “Praise YAH”
      YAH The Father (Genesis 1)
      YAH arrives via The TENT OF MEETING
      YAH was Who they Crucified for mans sins
      YAH was Crucified on an Almond TREE
      Original Semitic of Moses
      Isaiah Scroll (The Original Isaiah)

    • @iamgermane
      @iamgermane 26 днів тому

      He should have used cordless ratchets more.

  • @ecannon649
    @ecannon649 Місяць тому +26

    Would have loved to heard it run and see it going down the road. Nice work!

  • @iteerrex8166
    @iteerrex8166 Місяць тому +24

    What a labor of love. He more than just swapped the frame. He refurbished restored the guts of the 2001, and the body of 1966, and then fitted them together.

  • @lp-fluzaotf
    @lp-fluzaotf 10 годин тому

    Excellent job. Congratulation. Luiz Paulo - Rio de Janeiro- Brasil

  • @kennethpaladino4948
    @kennethpaladino4948 Місяць тому +1

    Kool! I just built a ‘65 c10 for a customer! Cut the floor & firewall out of 2000 silverado & welded the 65 cab 2 that! Never disconnected the floor from the chassis r removed any running gear! Lots of difficulties though due 2 the 99up chassis/ body mounts being mounted further forward! Built at least a dozen old hotrod cars & trucks this way! But used the 88-98 donor chassis & floor/firewall! Great way 2 build & eliminate the floor rot at the same time! I’m going 2 build my grandad’s ‘64 c10 from a 2006 4WD Tahoe! Have been told the chassis is correct length! Don’t know bout that yet, but had 2 add 7 inches 2 the front of the bed on the ‘65! U have inspired me 2 get on with it, but I have so many other projects 2 finish 1st! 👍👌

  • @brianward3944
    @brianward3944 Місяць тому +7

    My favorite body style Chevy ever made! Awesome project!

  • @johnkaimins9998
    @johnkaimins9998 Місяць тому +5

    A very impressive level of attention to detail. The only thing that detracts from the end result (if I may) is the lack of body work and OEM level of paint.

    • @gordocarbo
      @gordocarbo 5 днів тому

      Aging paint...maybe. But rust has 0 appeal, Id paint it too.
      Cant wrap my head around how much work and $ it took to do this.

  • @brianparker6811
    @brianparker6811 Місяць тому +7

    Brother you have so many different skills. What an amazing job. This is truly a treasure from the past saved!

    • @richardcline1337
      @richardcline1337 19 днів тому

      But it's NOT! The body is all that's left of this old classic. Even the interior is basically trashed. I wouldn't have that junk given to me.

    • @gordocarbo
      @gordocarbo 5 днів тому

      @@richardcline1337 Probaby drives and rides 100 times better but see your point.

  • @lendog203
    @lendog203 День тому

    you got crazy skills brother... congrats.

  • @peterironrope
    @peterironrope 2 дні тому

    Wow, what an amazing transformation for this beautiful Abandoned V8 Chevrolet C10 pickup truck. You all demonstrated and performed some very exceptional top tier automotive mechanical repairs and restoration. You guys are so good, you all should run a summer youth program or spread your wealth of knowledge at a local high school automotive class on automotive repairs and restoration. Share that beautiful wealth of knowledge with today's future youth. Great job guys, I'm proud of you and the people you have become to be.

  • @joserodriguez3479
    @joserodriguez3479 13 днів тому +1

    This man is an artist

  • @mrpesky163
    @mrpesky163 Місяць тому +13

    I like everything done, with one exception. The interior door panels are more "nasty" vibe than "worn and cool". Thanks for the video, nicely done!

    • @FLManGarage
      @FLManGarage Місяць тому +3

      I agree with you! I will be wrapping them in vinyl to match the seat at some point 😃

  • @SalahNoor-e4w
    @SalahNoor-e4w Місяць тому

    بارك الله فيك وكفاك على هذا العمل الجميل

  • @joseparra2648
    @joseparra2648 Місяць тому +3

    Saludos desde Venezuela Edo Trujillo 🇻🇪 éxitos cada día más hermano quedó calidad la camioneta excelente trabajo

  • @JoseCarlosAlmeida-rt5bn
    @JoseCarlosAlmeida-rt5bn Місяць тому

    Simplesmente maravilhoso. Ficou nota 1000, parabens pela restauração.

  • @eustaquiodias5688
    @eustaquiodias5688 Місяць тому +1

    Isso sim é um projeto de verdade, top demaissssss 👏👏👏👏👏

  • @james6275
    @james6275 Місяць тому +1

    That was a brilliant idea with the late model frame and drive train you did a fantastic job.

  • @gregeverett8932
    @gregeverett8932 Місяць тому +3

    Fantastic build. Personally, I'd sand that body down and give it the slick paint job it deserves after all that hard work. Great job anyway.

  • @butchquizon8986
    @butchquizon8986 Місяць тому +1

    Wow, what a job well done. I always love patina finished.

  • @tonoalvarado1436
    @tonoalvarado1436 Місяць тому

    ¡Maravilloso trabajo! Gracias por compartir.

  • @Six4691
    @Six4691 Місяць тому +2

    I’m not a big patina guy, but great work in saving a piece of history! Looks beautiful!

    • @richardcline1337
      @richardcline1337 19 днів тому

      But all he actually saved were parts of the old body. Everything else is from the victim Tahoe. I'm glad he likes it because I wouldn't want any of it.

  • @JohnGuess-g6k
    @JohnGuess-g6k Місяць тому

    Old guy here. Great job! Takes me back to my Dad’s 66 C20 fleet side. Hooked me on trucks forever. Like the blend of old and newish.

  • @loiho9078
    @loiho9078 Місяць тому +1

    Cảm ơn anh đã chia sẽ video rất hây ❤🎉chúc anh và gia đình nhiều sức khỏe an lành hạnh phúc và thành công 💕💕luôn đồng hành cùng anh ạ 🤝🤝

  • @iosifa5397
    @iosifa5397 Місяць тому

    excelente trabajo y gusto por la C10 , una hermosa maquina de vuelta a la vida, felicitaciones , saludos desde Argentina

  • @UncleRobsGarage
    @UncleRobsGarage 21 день тому

    Whole lot of work condensed into a short period excellent

  • @NachoPeco
    @NachoPeco Місяць тому

    Guauu!!!! Hermosa!!!!! Qué trabajo!!!! Te felicito amigo!!!!! ❤❤❤

  • @osmanartan6115
    @osmanartan6115 Місяць тому

    Helal olsun ustaya her beceri var onda tebrikler.

  • @RoverLover-mm7lb
    @RoverLover-mm7lb Місяць тому +2

    Love it! I would have gone with flat instead of glossy! great job!!!

    • @gordocarbo
      @gordocarbo 5 днів тому

      Same!! Gloss clear over rust just dont hit me right.
      Some days almost wish I put flat clear on my 'El and called it a day rather than 10 yrs 2 paint shops and way too much $

  • @adaorobertofreitas6338
    @adaorobertofreitas6338 Місяць тому

    Simplesmente maravilhoso parabéns 👏

  • @fedsweet1234
    @fedsweet1234 22 дні тому +1

    Awesome job awesome I have a 78 C10 you gave me a lot of good ideas excellent job dude excellent

  • @tobyboles5932
    @tobyboles5932 18 днів тому

    TOTALLY AWESOME. YOU ARE THE REAL DEAL BROTHER. LOVE THIS BEING LEFT ORIGINALLY OLD LOOK. TOTALLY AWESOME.

  • @jimromansr9971
    @jimromansr9971 Місяць тому +5

    Man, you had me until you decided not to paint the truck. To each their own, but if I put that much work into a vehicle, I’m going to paint it.

    • @gordocarbo
      @gordocarbo 5 днів тому

      Agree totally. Not a fan of rust, clear wont stop it either.

  • @BlakeParker15
    @BlakeParker15 Місяць тому +2

    Great craftsmanship and excellent results! Beautiful truck!! 😍

  • @B-radT5
    @B-radT5 Місяць тому +1

    My dad had that style of truck. I’ve always liked its looks. Nice job🤗

  • @clintmcgauley9211
    @clintmcgauley9211 Місяць тому

    Love every aspect but the body. Such a beautiful shape deserves a clean finish.

  • @JWnFlorida
    @JWnFlorida Місяць тому +10

    Gorgeous.. beautiful build..

    • @carylawson-le7og
      @carylawson-le7og Місяць тому +1

      It sucks without paint I don't care if you're a patina freak or not. Trucks nasty as keck lookin

    • @JWnFlorida
      @JWnFlorida Місяць тому

      @carylawson-le7og the people who spend more on paint than their motors are what is wrong with America. All show no go.

    • @gordocarbo
      @gordocarbo 5 днів тому +1

      @@JWnFlorida Not really...some arent into bling and power but want a nice looking ride. Usually the lowrider crowd. I like both power and nice paint, like driving a new car

    • @JWnFlorida
      @JWnFlorida 5 днів тому

      @gordocarbo I like it all.. perfect paint.. rat rods.. as long as the frame and the brakes match the power I'm a fan.

  • @LanceJohnston-d9q
    @LanceJohnston-d9q Місяць тому

    Dude this is so sick, i cannot even begin to explain how cool this is.

  • @TopTech-pq
    @TopTech-pq Місяць тому +1

    Tears fell as the music started to play. It was as if that old car was singing its final song, echoing like it once did, before leaving forever.

  • @gavinobarrera8412
    @gavinobarrera8412 Місяць тому

    What a beautiful turn out man. I can't wait to see videos of it running

  • @pedrodlpdelapaz1217
    @pedrodlpdelapaz1217 Місяць тому

    EXCELENTE TRABAJO,ME GUSTÓ.

  • @marcelosegura1162
    @marcelosegura1162 Місяць тому

    Hermoso! Felicidades!!!

  • @MultiKekek
    @MultiKekek Місяць тому

    Que trabajo imprecionante quedo hermosa felicitaciones

  • @irishhandyman2009
    @irishhandyman2009 Місяць тому

    What impressive work! Glad to see a man your age that can do that much work to create such a piece of art. You have a talent that is becoming a rare trait now a days. Hope you enjoy that Bow Tie for many years.

  • @gordocarbo
    @gordocarbo 5 днів тому

    Wow, that is a crapton of work you got a lotta skills man! Good job
    Bet it rides so nice! Last one I drove had a 4 spd and 305 V6 in it.
    Would be hard for me not to either go flat clear or just paint it aqua/white top

  • @kateandstevebeasley1678
    @kateandstevebeasley1678 Місяць тому

    Awesome result of a labour of love, congratulations on great looking truck👍👍

  • @Nobrun1
    @Nobrun1 Місяць тому +1

    Wow. I've never seen one of these where you leave the dents, rust holes and overall original look intact. Nice.

  • @romanrusavuk7764
    @romanrusavuk7764 Місяць тому

    Truck look awesome. The blue paint would look nice

  • @MarkRobertson-ho9tp
    @MarkRobertson-ho9tp Місяць тому +1

    Great job, impressive accomplishment and it came out very nice.

  • @adammcgeorge3538
    @adammcgeorge3538 Місяць тому +2

    Cool truck, love the look of clear coat over petina. The Jerry can fuel filler is very nice!

    • @gordocarbo
      @gordocarbo 5 днів тому

      Flat clear but shiny not to much

  • @ricardoarceruiz9565
    @ricardoarceruiz9565 Місяць тому

    Excelente trabajo

  • @hoobsgarage
    @hoobsgarage 27 днів тому

    FREAKING AWESOME!!!!

  • @armanusa986
    @armanusa986 29 днів тому

    someone is dreaming like me someone is doing it like him! good work enjoy it , i believe jealousy is exits

  • @francoisbouchard602
    @francoisbouchard602 Місяць тому +2

    Nice job sir Nice truck sir Nice show 😃👏👏👏👏👍👍👍👍👍

  • @WilliamCarr-tn5qp
    @WilliamCarr-tn5qp Місяць тому

    That's a very lovely truck

  • @LuisRobertoMendoza
    @LuisRobertoMendoza Місяць тому

    CONGRATULATIONS!!!!

  • @IronSikh44
    @IronSikh44 Місяць тому +1

    That truck looks sweet! Good job!

  • @norm-nas
    @norm-nas Місяць тому +1

    Really good work, good attention to detail. Lots of hard work done, I would not have sprayed clear on the rust and dents, kinda looks fake. Otherwise super good job.

  • @brycecrousore1985
    @brycecrousore1985 Місяць тому

    One of the best restoration videos on YT!!

    • @FLManGarage
      @FLManGarage Місяць тому

      Thank you!

    • @gordocarbo
      @gordocarbo 5 днів тому

      @@FLManGarage How long did it take you and how long to work all the bugs out? Ive done frame offs with no swaps and know what it takes.
      Good job

  • @kurtgood2914
    @kurtgood2914 Місяць тому

    Awesome transformation and the truck looks very good 👍

  • @armandoalanizjr.7730
    @armandoalanizjr.7730 Місяць тому

    Wow!! That's badass.. I love that patina Iook.. that's a lot of work.

  • @jarodmorris4408
    @jarodmorris4408 23 дні тому

    My dream truck is a mid-60s step side like this. I have a 2003 Yukon and this idea never crossed my mind. Would be an amazing build.

    • @gordocarbo
      @gordocarbo 5 днів тому

      This is a hell of a lotta work, time and $. Sure it drives nice but Id just put an engine trans and update a few things on the original frame

  • @peterdrew9393
    @peterdrew9393 Місяць тому +20

    For all the work put into this transformation, the bodywork would have loved the same attention.

    • @donparker1823
      @donparker1823 Місяць тому +8

      I get that. This is a super cool project but I have a hard time appreciating the patina look. I've had enough crap cars that I don't really understand the desire for a high end restoration to look like junk.

    • @johnthomas3842
      @johnthomas3842 Місяць тому +8

      @@donparker1823 Don, you Pete and I are of the same mind. I cannot imagine putting all that time and money into this only to end up with a junky looking truck. But, to his defense, It is his truck, his taste.

    • @scottsatterthwaite4073
      @scottsatterthwaite4073 Місяць тому +2

      @@johnthomas3842 Same here.

    • @dalemanolas5994
      @dalemanolas5994 Місяць тому +2

      Yeah, I'm not a fan of the patina (hipster rust) look. Still, whatever makes you happy.

    • @wackowacko8931
      @wackowacko8931 17 днів тому

      All you need to do is to paint a vehicle to today's standards yourself to understand patina. A "nice" paint job (ie. no Earl Scheib paint jobs) entails removing all dents and fixing all rusted panels, then bondo, then sanding the entire vehicle through all the steps, then primer or sealer, then 2k, then blocking, then taping, then color coat and clear. After that you need to wet sand the clear and then cut and buff - and you need to do this all yourself and pay for all the materials ($2-3K minimum). Expect it to take a minimum of 6 months of nights and weekends if you are diligent and multiple years if you are not (most never finish). Then you will truly understand the patina crowd. Don't want to do the work? You can write a check, but at the very least you are looking at about $12k at the very low end for a "nice" paint job if your vehicle is near perfect to start with.

  • @Detroitmuscle74
    @Detroitmuscle74 Місяць тому

    Fantastic craftsmanship details amazing.

  • @MarioCruz-q9x
    @MarioCruz-q9x Місяць тому

    Te felicito por esa restauración, te quedó bien, gracias por tu video, saludos

  • @xDrywall
    @xDrywall 23 дні тому

    🎉 Looks amazing. 🎉

  • @allenrichard8795
    @allenrichard8795 Місяць тому

    A very beautiful truck 💯

  • @TheJohndeere212
    @TheJohndeere212 Місяць тому

    Nice looking truck. I loved it!!

  • @capt.spaulding5858
    @capt.spaulding5858 7 днів тому

    Great job looks fantastic! 🇺🇸🫡

  • @JR-ov6oe
    @JR-ov6oe Місяць тому

    Without the knowledge of all the trades it would be impossible but you made it happen and with the help of ppl . Love it just love it wasn't expecting a 2001 tahoe frame to be a doner

  • @awesomeclassiccar356
    @awesomeclassiccar356 Місяць тому

    Wow lot of work, looks good

  • @chaelodoul9401
    @chaelodoul9401 Місяць тому

    It’s freakin beautiful, man. Just beautiful.

  • @jerrybushman
    @jerrybushman Місяць тому +1

    This is on par with the ICON Derelict brand 👏👏👏👏👏👏👏👏👏👏👏👏

  • @denniscarreno5882
    @denniscarreno5882 Місяць тому

    I love🎉 your video…no nonsense chatting….straight to to work….well done….greetings from down under,Australia….stay safe!

  • @SuperchiefApache
    @SuperchiefApache Місяць тому +1

    Just flipping well done!! Love it!

  • @darrellroeters4951
    @darrellroeters4951 Місяць тому

    You are a master and a well rounded mechanic, to pull this off.

    • @gordocarbo
      @gordocarbo 5 днів тому

      Sure is! Electrical, fabbing on and on. Dont think Id have the patience to literally rebuild the truck adapting everything to work.

  • @joseluismedinahernandez2572
    @joseluismedinahernandez2572 Місяць тому

    No manches man!!! Lo haces ver bien fácil!!!! Ya hasta me anime pero nada más tengo un desarmador y martillo!!

  • @lucianopedro8841
    @lucianopedro8841 Місяць тому

    Parabéns bela restauracao

  • @juleesadventures7925
    @juleesadventures7925 Місяць тому +2

    That looks amazing I would love to buy that ❤🇬🇧

  • @javierroman9836
    @javierroman9836 Місяць тому

    todo una obra de alte muy hermoso

  • @lencampa9049
    @lencampa9049 Місяць тому

    Excellent .❤Excellent ❤excellent😊 job😊

  • @jasonconnor3905
    @jasonconnor3905 Місяць тому +2

    I cannot believe this an be done in under an hour

  • @Bruno-l4c
    @Bruno-l4c Місяць тому

    Salut depuis la France.magnifique pick UP.bravo

  • @jessechavez7320
    @jessechavez7320 Місяць тому

    Overall i do like everything done! a lot of attention to detail and i do love the patina! though i prefer all the rusted areas to be fully repaired and then patina matched but you're labor of love so the choices you made are great either way!

  • @neitabeel
    @neitabeel Місяць тому

    Show de bola! muito top.

  • @johnd4732
    @johnd4732 Місяць тому

    Great camera work great editing not ruined like a bunch of other people that do the same stuff buy bunch of BS lot of hours went into that for our benefit awesome bro

  • @garywinkel1831
    @garywinkel1831 Місяць тому

    Very cool, thanks for sharing!

  • @GroundedFlyboy737
    @GroundedFlyboy737 Місяць тому +1

    Incredible! You guys have serious skills, thanks for sharing this journey. I learned how to drive on this truck but with a 3 on the tree. I get so tired of seeing the slammed to the ground C-10s with LS7 swaps, and streamlined bodys. This looks, and I would think, performs like a proper truck. Only thing I would change is I would have fixed the rust holes in the front of the hood. Amazing work, how does it run?

    • @gordocarbo
      @gordocarbo 5 днів тому

      I leave most my trucks stock ride height.
      Caminos Ill drop them an inch or two no more. Love gen 1 power

  • @eddiereeher7594
    @eddiereeher7594 29 днів тому

    good show.alot of work. But the end is rewording.Keep on Truckin 😎👍

  • @hankcuccina5260
    @hankcuccina5260 Місяць тому

    That's a huge job to undertake, good on you and thanks for the video.

  • @coyotiess
    @coyotiess Місяць тому +1

    SWEET RIDER!

  • @donaldstutes9194
    @donaldstutes9194 Місяць тому +4

    Awesome idea with the gas can

  • @petroassuncao3392
    @petroassuncao3392 Місяць тому

    👏👏👏👏👏 excelente, parabéns.

  • @josephvalek5746
    @josephvalek5746 Місяць тому

    Very nice, love the patina look!

  • @cathylopez4004
    @cathylopez4004 Місяць тому

    You're a Genius!

  • @mikesirot6396
    @mikesirot6396 Місяць тому

    Magnificent!!!!

  • @Steven5teven
    @Steven5teven Місяць тому

    Beautiful!

  • @williamjordan9237
    @williamjordan9237 Місяць тому

    You sir are a one stop shop.

  • @johepple5124
    @johepple5124 Місяць тому +2

    Cheaper than a new truck, plus it will last longer

  • @TheVas1968
    @TheVas1968 Місяць тому

    QUE CHINGON AMIGO

  • @MrJenten10
    @MrJenten10 Місяць тому

    Simply amazing....