Series 1 Engine repair part 1
Вставка
- Опубліковано 1 сер 2024
- Subscriptions: britrest.com/subscriptions/ / britrest
www.paypal.me/britrest2018 Shop www.britrest.com/shop
utreon.com/c/britrest/videos
Email britrest@britrest.com
This video is produced for entertainment purposes only and Britannica Restorations nor Michael Wesson and/or guests featured in this video shall not, in any way or measure, be held accountable or responsible for any damages related to attempted repairs as pictured in this video.
All opinions expressed by Michael Wesson and/or his guests are solely for entertainment purposes and shall not be interpreted as an official sponsorship of a product, brand, enterprise nor a judgement of quality and/or value of a product, brand, and/or enterprise.
Furthermore, Michael Wesson and/or Britannica Restorations are not responsible for the comments published by viewers of said video. - Авто та транспорт
My late Dad drove many ex military Willy’s Jeeps, S1’s then later S11’s & S11A’s up to S111 and he thought the S1 was the best of them all, esp in winter on soft chewed up terrain in the 50’s during construction of the Hydro Schemes, not overly powerful but lots of traction & very good balance, only downside low slung fuel tank. My favourite is the S11/11A with nice quiet, smooth and very tractable 2286cc 4C Petrol Engine which is what I learned to drive in at an early age.
Thanks for the info!
Permatex Ultra grey. . Love it. Let dry really well before any oil . cheers 🍺
Good to know!
Nice to see and work on an original landrover
Thanks!
Mike, I keep all my RTV silicone sealants in the workshop, (beer), refrigerator, they can last for years at that temperature. Only take them out for the time it takes to apply them then put them back in. I use that Loctite and stuff we have here in Australia called Blue Max, it always sets fine even if I've had it stored for a long time. Using the fridge has saved me heaps of money from having to buy new sealant for every job.
I have noticed a few unopened RTV's like this do not cure
Catching up on a few videos Mike ! Hope your well
Welcome back!
Relaxing one with that bubbling fish tank ambiance
Seems like S2 are a bit easier to work on in some ways, LR having learned a few lessons after v1.0.
Exactly, only to see where the Rocker valves are sitting Looks quiet interesting to adjust the valves. Its much easier in the 2.25 4cyl engine, but they came Back to old manners in the 6cyl engine
It maybe a landrover mechanic thing or just a age thing but every landrover bonnet open tool using tinkerier talks to the car and the repair sprint's
I'm doing a S1 IOE 2.0 Spreadbore since last year and it was my very first complete dismantle and reassembly job in and engine in my life. One my tricky decisions was the rear crank seal that needed to be replaced and the one that was ther installed for much more than 20 years (I had it stopped in my garage for more than 15) was a S2 plate with a split seal that fitted the crank diameter. I Tried to find a seal to fit there but had no success, so I had to order from Cox & Turner the correct seal and many other parts to do the job. Unfortunatelly with brexit, all the deliveries between UK and EU had became a complete mess and had to wait several weeks and pay huge amounts in taxes until I could see the parts in my hands.
Now, the engine is quite ready and hope soon I can start it and find out if I did a good job or not.
I believe I will find out after I see your lessons.😀
I found Craddock's had the seal for £49, and they have a lot of S1 parts at reasonable prices
@@BritannicaRestorations That was a good price, but when I tried to find it, that wasn't available, I think. Instead, C&T have all other parts and very good communication with Ian Cox.
When I was looking at prices years ago Dunsfold had genuine old stock at £300 I believe!
É um prazer vê-lo trabalhar senhor Mike. Devo a si tudo o que sei de mecânica Land Rover. Obrigado de coração.
Listening to that coolant running out I need a wee now.
I thinking the same thing
It’s okay, Mike can increase your flow with some copper wire.
Don't forget to disconnect the ECU.....I believe on that model they were a Tri-ang and required winding up on a 3 weekly basis....
I did take THE fuse out. Lol!
I've had RTV go bad if it gets frozen. Keep it stored at room temp.
Funny that, as a lot of guys keep an opened tube in the fridge
thx for sharing mike, thats going to be a good one
i am pretty shure the list for needed spareparts will get longer when the engine is out and clean.
and be shure that me and all the others who have an old lady in the garage are scratching our head, if we should take a closer look at the engine or leave it inside and wish for the best ... especially at -5
thumbs up
Well the cylinders are good - I ended up taking off the head out of curiosity - needs a timing chain, new gaskets and lock tabs.
Looks like this has been out in the past
I dont want to step ahead, but compression Test was on the list?
The valves, compression Rings will be tested?
Oh its going to bei interesting.
hello mike, greetings from england,might be an idea to overhaul the air cleaner while its out, good luck. its -5 over here, cold !
I was out today power washing and sandblasting at -7c!
Hey Mike do you have any trade tips/secrets on how to clean them greasy hands after each job?
I am forever washing my hands, but I use this stuff - works great
www.kleenflo.com/products/539.html
try antidandruff shampoo with some warm water ...
Speaking of beer, how are you going to manage with the Canadian government new recommendation of only two drinks a week, maybe two massive drinks spread out over the week.
Well, Debra and I are now on a low-carb diet trying to lose this belly fat so does not matter at the moment, but it may be an idea to fire up my sill again!
The original box from Caddocks was crackers for the size of the contents, hardly surprising it was silly money for shipping. The S1 is looking good, be interesting to see the engine out and the work underway with it. I'm messing around with that wee JAP stationary engine at the moment. Not much to it, but still a bit of a learning curve for me. Never worked with a magneto before. Discovered a stuck valve when I removed the head but freed it off. Presume the S1 has a distributor?
Look for another order soon!